|
|
|
nero dvd burn fail and after clean install can't see dvd
|
|
|
windychip
Newbie
|
6. June 2006 @ 23:55 |
Link to this message
|
|
Nero burn failed: Burn process failed at 2.4 (3,324 Kb/s) and then I did nero clean installs and driver checks and reinstalled to latest nero 6. My dvd's are correct media that I have burned on this computer before...I can read the dvd (not copy protected) on this computer with media player but I can not burn a copy?...very frustrating...days fighting the beast.
Below is infotool...helpppahhh
Nero InfoTool 3.07
Drive Information
------------------
Drive : HL-DT-ST DVD+RW GCA-4040N
Type : DVD+R/RW Recorder
Firmware Version : C108
Buffer Size : 2 MB
Date : ?
Serial Number
Vendor Specific :
Drive Letter : D:\
Location : 1:0
Mechanism : Tray
Read Speed : 24 X
Write Speed : 16 X
Read CD Text : Yes
Return C2 Pointers : No
Read CD-R : Yes
Read CD-RW : Yes
Read DVD-ROM : Yes
Read DVD-RAM : No
Read DVD-R : Yes
Read DVD-RW : Yes
Read DVD-R DL : No
Read DVD+R : Yes
Read DVD+RW : Yes
Read DVD+R DL : No
Read BD-ROM : No
Read BD-R : No
Read BD-RE : No
Read HD DVD-ROM : No
Read HD DVD-R : No
Read HD DVD-RW : No
Read HD-BURN : No
Read Digital Audio : Yes
Read CD+G : Yes
Read VideoCD : Yes
Write CD-R : Yes
Write CD-RW : Yes
Write DVD-R : No
Write DVD-RW : No
Write DVD-R DL : No
Write DVD+R : Yes
Write DVD+RW : Yes
Write DVD+R DL : No
Write DVD-RAM : No
Write BD-R : No
Write BD-RE : No
Write HD DVD-R : No
Write HD DVD-RW : No
Write HD-BURN-R : No
Write HD-BURN-RW : No
Buffer Underrun Protection : Yes
Mount Rainier : No
SolidBurn : No
Modes : Packet, TAO, DAO, SAO, RAW SAO, RAW DAO, RAW SAO 16, RAW SAO 96, RAW DAO 16, RAW DAO 96
Region Protection Control : RPC II
Region : 1
Changes User : 4
Changes Vendor : 4
Disc Information (D:\)
-------------------
Type : - no disc inserted -
Interface Information
---------------------
Adapter 1
---------
Description : Primary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: IC25N060ATMR04-0
Type : Disk Drive
DMA : On
Adapter 2
---------
Description : Secondary IDE Channel
Driver
Description : System32\DRIVERS\atapi.sys
Company : Microsoft Corporation
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Description : IDE/ATAPI Port Driver
Attached Devices
Description : Master: HL-DT-ST DVD+RW GCA-4040N
Type : CD-Rom Drive
DMA : On
Autorun : On
Adapter 3
---------
Description : Unknown Adapter
Driver
Description : System32\Drivers\imagedrv.sys
Company : Ahead Software AG
Version : 2.29.0.0 built by: WinDDK
Description : NERO IMAGEDRIVE SCSI miniport
Attached Devices
Software Information
--------------------
Operating System : Windows XP Professional (5.01.2600 Service Pack 2)
Country : United States
Language : English
ANSI Code Page : 1252
OEM Code Page : 437
DirectX : DirectX 9.0c
Description : Nero Burning ROM
Version : 6, 6, 1, 4
Company : Ahead Software AG
Version Check : Ok
Description : Nero StartSmart
Version : 2, 1, 0, 5
Company : Ahead Software AG
Description : NeroVision
Version : 3,1,0,25
Company : Nero AG
Description : Nero ShowTime
Version : 2, 0, 1, 9
Company : Nero AG
Description : Nero Recode 2
Version : 2, 2, 6, 17
Company : Ahead Software AG
Description : Cover Designer
Version : 2, 3, 1, 3
Company : Nero AG
Description : Nero BackItUp Application
Version : 1, 2, 0, 61
Company : Ahead Software AG
Description : InCD
Version : 4, 3, 23, 2
Company : Nero AG
Hardware Information
--------------------
CPU : 1400 MHz
Bus Speed : 133 MHz
Motherboard : Dell 0D2465
System : Dell Inspiron 8600
BIOS : Dell A00
Memory : 511 MB
Sound : SigmaTel Audio
Video : MOBILITY RADEON 9000
Driver Information
------------------
Driver : 61883
Description : 61883 Device Class
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Abiosdsk
Description : n/a
Version : n/a
Company : n/a
Driver : abp480n5
Description : AdvanSys SCSI Controller Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : ACPI
Description : ACPI Driver for NT
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : ACPIEC
Description : ACPI Embedded Controller Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : adpu160m
Description : Adaptec Ultra160 SCSI miniport
Version : v3.60a (Lab01_N(johnstra).010529-2218)
Company : Microsoft Corporation
Driver : aec
Description : Microsoft Acoustic Echo Canceller
Version : 5.1.2601.2180
Company : Microsoft Corporation
Driver : agpCPQ
Description : CompatNT AGP Filter
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Aha154x
Description : Adaptec AHA-154x series SCSI miniport
Version : v1.13b (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : aic78u2
Description : Adaptec Ultra2 SCSI miniport
Version : v3.60a (Lab01_N.010510-0033)
Company : Microsoft Corporation
Driver : aic78xx
Description : Adaptec Ultra SCSI miniport
Version : v3.60a (Lab01_N.010510-0033)
Company : Microsoft Corporation
Driver : AliIde
Description : ALi mini IDE Driver
Version : 1.20
Company : Acer Laboratories Inc.
Driver : alim1541
Description : ALi M1541 NT AGP Filter
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : amdagp
Description : AMD Win2000 AGP Filter
Version : 5.00 (xpsp_sp2_rtm.040803-2158)
Company : Advanced Micro Devices, Inc.
Driver : amsint
Description : AMD SCSI/NET Controller
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : ApfiltrService
Description : n/a
Version : n/a
Company : n/a
Driver : Arp1394
Description : IP/1394 Arp Client
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : asc
Description : AdvanSys SCSI Controller Driver
Version : 2.9I-MS (XPClient.010817-1148)
Company : Advanced System Products, Inc.
Driver : asc3350p
Description : AdvanSys SCSI Card Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : asc3550
Description : AdvanSys Ultra-Wide PCI SCSI Driver
Version : 3.1E-MS (XPClient.010817-1148)
Company : Advanced System Products, Inc.
Driver : AsyncMac
Description : MS Remote Access serial network driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : atapi
Description : IDE/ATAPI Port Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Atdisk
Description : n/a
Version : n/a
Company : n/a
Driver : ati2mtag
Description : ATI Radeon Miniport Driver
Version : 6.14.10.6359
Company : ATI Technologies Inc.
Driver : Atmarpc
Description : IP/ATM Arp Client
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : audstub
Description : AudStub Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Avc
Description : AVC Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Avg7Core
Description : AVG Scanning Engine
Version : 7,1,0,394
Company : GRISOFT, s.r.o.
Driver : Avg7RsW
Description : AVG Resident Shield Unload Helper
Version : 7,1,0,354
Company : GRISOFT, s.r.o.
Driver : Avg7RsXP
Description : AVG Resident Anti-Virus Shield
Version : 7,1,0,381
Company : GRISOFT, s.r.o.
Driver : BCM43XX
Description : n/a
Version : n/a
Company : n/a
Driver : bcm4sbxp
Description : Broadcom Corporation NDIS 5.1 ethernet driver
Version : 3.60.0.0 built by: WinDDK
Company : Broadcom Corporation
Driver : BCMModem
Description : n/a
Version : n/a
Company : n/a
Driver : bvrp_pci
Description : n/a
Version : n/a
Company : n/a
Driver : cbidf
Description : n/a
Version : n/a
Company : n/a
Driver : cbidf2k
Description : CardBus/PCMCIA IDE Miniport Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : CCDECODE
Description : WDM Closed Caption VBI Codec
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : cd20xrnt
Description : IBM Portable CD-ROM Drive Miniport
Version : v3.01 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Cdaudio
Description : CD-ROM Audio Filter Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Cdfs
Description : CD-ROM File System Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Cdrom
Description : SCSI CD-ROM Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Changer
Description : n/a
Version : n/a
Company : n/a
Driver : CmBatt
Description : Control Method Battery Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : CmdIde
Description : CMD PCI IDE Bus Driver
Version : 2.0.7 (XPClient.010817-1148)
Company : CMD Technology, Inc.
Driver : Compbatt
Description : Composite Battery Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Cpqarray
Description : Compaq Drive Array Controllers SCSI Miniport Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : dac2w2k
Description : Mylex Disk Array Controller Driver
Version : 6.00-21 (XPClient.010817-1148)
Company : Mylex Corporation
Driver : dac960nt
Description : Mylex Disk Array Controller Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : DCamUSBSQTECH
Description : n/a
Version : n/a
Company : n/a
Driver : DELTAFW
Description : M-Audio Delta FW Audio Driver (WDM)
Version : 5.10.00.5023
Company : Midiman/M-Audio
Driver : Disk
Description : PnP Disk Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : dmboot
Description : NT Disk Manager Startup Driver
Version : 2600.2180.503.0
Company : Microsoft Corp., Veritas Software
Driver : dmio
Description : NT Disk Manager I/O Driver
Version : 2600.2180.503.0
Company : Microsoft Corp., Veritas Software
Driver : dmload
Description : NT Disk Manager Startup Driver
Version : 2600.0.503.0
Company : Microsoft Corp., Veritas Software.
Driver : DMusic
Description : Microsoft Kernel DLS Synthesizer
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : dpti2o
Description : DPT SmartRAID miniport
Version : 2.09 (Lab01_N.010309-0027)
Company : Microsoft Corporation
Driver : drmkaud
Description : Microsoft Kernel DRM Audio Descrambler Filter
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : EL90XBC
Description : n/a
Version : n/a
Company : n/a
Driver : Fastfat
Description : Fast FAT File System Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Fdc
Description : Floppy Disk Controller Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Flpydisk
Description : Floppy Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : FltMgr
Description : Microsoft Filesystem Filter Manager
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Ftdisk
Description : FT Disk Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Gpc
Description : n/a
Version : n/a
Company : n/a
Driver : gv3
Description : Processor Device Driver
Version : 5.1.2600.1143 (xpsp2.021108-1929)
Company : Microsoft Corporation
Driver : HidUsb
Description : USB Miniport Driver for Input Devices
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : hpn
Description : NetRAID-4M Miniport Driver
Version : 5.1.2467.0 (Lab01_N(johnstra).010423-0023)
Company : Microsoft Corporation
Driver : HTTP
Description : HTTP Protocol Stack
Version : 5.1.2600.2525 (xpsp_sp2_gdr.040919-1056)
Company : Microsoft Corporation
Driver : i2omgmt
Description : I2O Utility Filter
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : i2omp
Description : I2O Miniport Driver
Version : 1.0.0.6 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : i8042prt
Description : i8042 Port Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : i81x
Description : n/a
Version : n/a
Company : n/a
Driver : iAimFP0
Description : n/a
Version : n/a
Company : n/a
Driver : iAimFP1
Description : n/a
Version : n/a
Company : n/a
Driver : iAimFP2
Description : n/a
Version : n/a
Company : n/a
Driver : iAimFP3
Description : n/a
Version : n/a
Company : n/a
Driver : iAimFP4
Description : n/a
Version : n/a
Company : n/a
Driver : iAimTV0
Description : n/a
Version : n/a
Company : n/a
Driver : iAimTV1
Description : n/a
Version : n/a
Company : n/a
Driver : iAimTV2
Description : n/a
Version : n/a
Company : n/a
Driver : iAimTV3
Description : n/a
Version : n/a
Company : n/a
Driver : iAimTV4
Description : n/a
Version : n/a
Company : n/a
Driver : imagedrv
Description : NERO IMAGEDRIVE SCSI miniport
Version : 2.29.0.0 built by: WinDDK
Company : Ahead Software AG
Driver : imagesrv
Description : Nero Image Server
Version : 2.29.0.0 built by: WinDDK
Company : Ahead Software AG
Driver : Imapi
Description : IMAPI Kernel Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : InCDfs
Description : InCD File System Driver
Version : 4, 3, 23, 2
Company : Nero AG
Driver : InCDPass
Description : Ahead RW Filter Driver
Version : 4, 3, 23, 2
Company : Nero AG
Driver : incdrm
Description : Ahead MRW Filter Driver
Version : 4, 3, 23, 2
Company : Nero AG
Driver : ini910u
Description : INITIO ini910u SCSI miniport
Version : 2.17 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : IntelIde
Description : Intel PCI IDE Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : intelppm
Description : Processor Device Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : ip6fw
Description : IPv6 Windows Firewall Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : IpFilterDriver
Description : n/a
Version : n/a
Company : n/a
Driver : IpInIp
Description : IP in IP Encapsulation Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : IpNat
Description : IP Network Address Translator
Version : 5.1.2600.2524 (xpsp_sp2_gdr.040919-1056)
Company : Microsoft Corporation
Driver : IPSec
Description : IPSec Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : IRENUM
Description : Infra-Red Bus Enumerator
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : isapnp
Description : PNP ISA Bus Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : kmixer
Description : Kernel Mode Audio Mixer
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : lbrtfdc
Description : n/a
Version : n/a
Company : n/a
Driver : Modem
Description : Modem Device Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : mouhid
Description : HID Mouse Filter Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : mraid35x
Description : MegaRAID RAID Controller Driver for Windows Whistler 32
Version : 6.19 (XPClient.010817-1148)
Company : American Megatrends Inc.
Driver : MRxDAV
Description : Windows NT WebDav Minirdr
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : MSKSSRV
Description : MS KS Server
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : MSPCLOCK
Description : MS Proxy Clock
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : MSPQM
Description : MS Proxy Quality Manager
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : mssmbios
Description : System Management BIOS Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : MSTEE
Description : WDM Tee/Communication Transform Filter
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : NABTSFEC
Description : WDM NABTS/FEC VBI Codec
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : NdisIP
Description : Microsoft IP Driver
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : NdisTapi
Description : NDIS 3.0 connection wrapper driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Ndisuio
Description : NDIS User mode I/O Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : NdisWan
Description : MS PPP Framing Driver (Strong Encryption)
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : NIC1394
Description : IEEE1394 Ndis Miniport and Call Manager
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Npfs
Description : NPFS Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Ntfs
Description : NT File System Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : nv
Description : n/a
Version : n/a
Company : n/a
Driver : NwlnkFlt
Description : NWLINK2 Traffic Filter Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : NwlnkFwd
Description : NWLINK2 Forwarder Driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : ohci1394
Description : 1394 OpenHCI Port Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : omci
Description : OMCI Device Driver
Version : 7, 0, 323, 0
Company : Dell Computer Corporation
Driver : P3
Description : Processor Device Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Parport
Description : Parallel Port Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : PartMgr
Description : Partition Manager
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : ParVdm
Description : VDM Parallel Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : PCI
Description : NT Plug and Play PCI Enumerator
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : PCIDump
Description : n/a
Version : n/a
Company : n/a
Driver : PCIIde
Description : Generic PCI IDE Bus Driver
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Pcmcia
Description : PCMCIA Bus Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : PDCOMP
Description : n/a
Version : n/a
Company : n/a
Driver : PDFRAME
Description : n/a
Version : n/a
Company : n/a
Driver : PDRELI
Description : n/a
Version : n/a
Company : n/a
Driver : PDRFRAME
Description : n/a
Version : n/a
Company : n/a
Driver : perc2
Description : PERC 2 Miniport Driver
Version : 5.1.2467.0 (Lab01_N(johnstra).010423-0023)
Company : Microsoft Corporation
Driver : perc2hib
Description : PERC 2 Hibernate Driver
Version : 5.1.2467.0 (Lab01_N(johnstra).010423-0023)
Company : Microsoft Corporation
Driver : pfc
Description : Padus(R) ASPI Shell
Version : 2, 5, 0, 201
Company : Padus, Inc.
Driver : portD
Description : n/a
Version : n/a
Company : n/a
Driver : PptpMiniport
Description : n/a
Version : n/a
Company : n/a
Driver : Processor
Description : n/a
Version : n/a
Company : n/a
Driver : PSched
Description : MS QoS Packet Scheduler
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Ptilink
Description : Parallel Technologies DirectParallel IO Library
Version : 1.10 (XPClient.010817-1148)
Company : Parallel Technologies, Inc.
Driver : ql1080
Description : Miniport Driver for QLogic ISP PCI Adapters
Version : 3.04
Company : QLogic Corporation
Driver : Ql10wnt
Description : Miniport Driver for QLogic ISP PCI Adapters
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : ql12160
Description : Miniport Driver for QLogic ISP PCI Adapters
Version : 7.13.02 (W64)
Company : QLogic Corporation
Driver : ql1240
Description : QLogic ISP PCI Adapters
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : ql1280
Description : Miniport Driver for QLogic ISP PCI Adapters
Version : 7.13.01 (W2K)
Company : QLogic Corporation
Driver : Rasl2tp
Description : RAS L2TP mini-port/call-manager driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : RasPppoe
Description : RAS PPPoE mini-port/call-manager driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Raspti
Description : PTI DirectParallel(R) mini-port/call-manager driver
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : Rdbss
Description : Redirected Drive Buffering SubSystem Driver
Version : 5.1.2600.2541 (xpsp_sp2_gdr.040919-1056)
Company : Microsoft Corporation
Driver : RDPCDD
Description : RDP Miniport
Version : 5.1.2600.0 (xpclient.010817-1148)
Company : Microsoft Corporation
Driver : rdpdr
Description : Microsoft RDP Device redirector
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : RDPWD
Description : RDP Terminal Stack Driver (US/Canada Only, Not for Export)
Version : 5.1.2600.2695 (xpsp_sp2_gdr.050609-1528)
Company : Microsoft Corporation
Driver : redbook
Description : Redbook Audio Filter Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Secdrv
Description : n/a
Version : n/a
Company : n/a
Driver : serenum
Description : Serial Port Enumerator
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Serial
Description : Serial Device Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Sfloppy
Description : SCSI Floppy Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Simbad
Description : n/a
Version : n/a
Company : n/a
Driver : sisagp
Description : SiS NT AGP Filter
Version : 5.12.01.2010 (xpsp_sp2_rtm.040803-2158)
Company : Silicon Integrated Systems Corporation
Driver : SLIP
Description : Microsoft Slip Deframing Filter Minidriver
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Sparrow
Description : Adaptec AIC-6x60 series SCSI miniport
Version : v2.0a (ReleaseBinaries.001205-1804)
Company : Adaptec, Inc.
Driver : splitter
Description : Microsoft Kernel Audio Splitter
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : sr
Description : System Restore Filesystem Filter Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Srv
Description : Server driver
Version : 5.1.2600.2673 (xpsp_sp2_gdr.050509-1531)
Company : Microsoft Corporation
Driver : STAC97
Description : SigmaTel Audio Driver (WDM)
Version : 5.10.3794
Company : SigmaTel, Inc.
Driver : StillCam
Description : n/a
Version : n/a
Company : n/a
Driver : streamip
Description : Microsoft IP Test Driver
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : swenum
Description : Plug and Play Software Device Enumerator
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : swmidi
Description : Microsoft GS Wavetable Synthesizer
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : symc810
Description : Symbios Logic Inc. SCSI Miniport Driver
Version : 5.1.2409.1 (ReleaseBinaries.001205-1804)
Company : Symbios Logic Inc.
Driver : symc8xx
Description : Symbios 8XX SCSI Miniport Driver
Version : 5.1.2409.1 (ReleaseBinaries.001205-1804)
Company : LSI Logic
Driver : sym_hi
Description : Symbios Hi-Perf SCSI Miniport Driver
Version : 5.1.2462.0 (Lab01_N.010309-0027)
Company : LSI Logic
Driver : sym_u3
Description : Symbios Ultra3 SCSI Miniport Driver
Version : 5.1.2462.0 (Lab01_N.010309-0027)
Company : LSI Logic
Driver : sysaudio
Description : System Audio WDM Filter
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Tcpip
Description : TCP/IP Protocol Driver
Version : 5.1.2600.2827 (xpsp_sp2_gdr.060112-1653)
Company : Microsoft Corporation
Driver : TDPIPE
Description : Named Pipe Transport Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : TDTCP
Description : TCP Transport Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : TermDD
Description : Terminal Server Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : TosIde
Description : Toshiba PCI IDE Controller
Version : 5.1.2600.0 (XPClient.010817-1148)
Company : Microsoft Corporation
Driver : Udfs
Description : UDF File System Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : ultra
Description : Promise Ultra66 Miniport Driver
Version : 1.43 (Build 0603)
Company : Promise Technology, Inc.
Driver : Update
Description : Update Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : usbehci
Description : EHCI eUSB Miniport Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : usbhub
Description : Default Hub Driver for USB
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : usbprint
Description : USB Printer driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : usbscan
Description : USB Scanner Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : USBSTOR
Description : USB Mass Storage Class Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : usbuhci
Description : UHCI USB Miniport Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : VgaSave
Description : n/a
Version : n/a
Company : n/a
Driver : viaagp
Description : VIA NT AGP Filter
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : ViaIde
Description : Generic PCI IDE Bus Driver
Version : 1.00.01.01
Company : Microsoft Corporation
Driver : VolSnap
Description : Volume Shadow Copy Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : Wanarp
Description : MS Remote Access and Routing ARP Driver
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : wceusbsh
Description : Windows CE USB Serial Host
Version : 4.0.4232.0
Company : Microsoft Corporation
Driver : WDICA
Description : n/a
Version : n/a
Company : n/a
Driver : wdmaud
Description : MMSYSTEM Wave/Midi API mapper
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : WSTCODEC
Description : WDM WST Codec Driver
Version : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Company : Microsoft Corporation
Driver : InCDRec
Description : n/a
Version : n/a
Company : n/a
Driver : msvcrt.dll
Version : 7.0.2600.2180 (xpsp_sp2_rtm.040803-2158)
Driver : msvcirt.dll
Version : 7.0.2600.2180 (xpsp_sp2_rtm.040803-2158)
Driver : mfc42.dll
Version : 6.02.4131.0
Driver : msvcp60.dll
Version : 6.02.3104.0
Driver : MSVCP70.DLL
Version : 7.00.9466.0
Driver : MSVCR70.DLL
Version : 7.00.9466.0
Driver : ole32.dll
Version : 5.1.2600.2726 (xpsp_sp2_gdr.050725-1528)
Driver : olepro32.dll
Version : 5.1.2600.2180
Driver : OLEDLG.DLL
Version : 1.0 (XPClient.010817-1148)
Driver : advapi32.dll
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Driver : comctl32.dll
Version : 5.82 (xpsp_sp2_rtm.040803-2158)
Driver : setupapi.dll
Version : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Driver : Aac.dll
Version : 2, 5, 9, 991
Driver : aacenc32.dll
Version : 3,2,0,30
Driver : Aiff.dll
Version : 2, 0, 1, 0
Driver : DefConvertor.dll
Version : 2, 0, 2, 0
Driver : Downloaders.dll
Version : 2, 0, 1, 0
Driver : lame_enc.dll
Version : 3, 93, 1, 0
Driver : midi.dll
Version : 2, 0, 1, 0
Driver : mp3PP.dll
Version : 1, 0, 0, 9
Driver : mp3PRO.dll
Version : 2, 0, 4, 8
Driver : mp3PRO_dmo.dll
Version : 2, 0, 0, 16
Driver : mp3PRO_hlp.dll
Version : 2, 0, 0, 16
Driver : msa.dll
Version : 2, 0, 9, 37
Driver : ogg.dll
Version : 1, 0, 0, 6
Driver : TWINVQ2.CDB
Version : n/a
Driver : video.dll
Version : 2, 0, 0, 2
Driver : Vqf.dll
Version : 2, 0, 1, 0
Driver : VqfDecLib.dll
Version : 2, 0, 0, 6
Driver : VqfEncLib.dll
Version : 2, 0, 0, 6
Driver : VqfEncLib1.dll
Version : 2, 0, 0, 6
Driver : wav.dll
Version : 2, 0, 2, 0
Driver : aacplus.dll
Version : 3,2,0,30
Driver : dvddisc.dll
Version : 3,2,0,30
Driver : em2v.dll
Version : 3, 2, 0, 30
Driver : NDParser.ax
Version : 3,2,0,30
Driver : ndvddisc.dll
Version : 3,2,0,30
Driver : NeAcEnc.dll
Version : 3,2,0,30
Driver : NeAMR.dll
Version : 3,2,0,30
Driver : NeAudCD.ax
Version : 3,2,0,30
Driver : NeAudio.ax
Version : 3, 2, 0, 30
Driver : NeAudioConv.ax
Version : 3, 2, 0, 30
Driver : NeCapture.ax
Version : 3, 2, 0, 30
Driver : NeDVD.ax
Version : 3, 2, 0, 30
Driver : NeDVSplitter.ax
Version : 3,2,0,30
Driver : NeEm2a.dll
Version : 3,2,0,30
Driver : NeFileSourceAsync.ax
Version : 3,2,0,30
Driver : NeFileSrc.ax
Version : 3,2,0,30
Driver : NeFSource.ax
Version : 3,2,0,30
Driver : NeNDAud.ax
Version : 3, 2, 0, 30
Driver : NeNDGui.dll
Version : 3, 2, 0, 30
Driver : NeNDMux.ax
Version : 3, 2, 0, 30
Driver : NeNDVid.ax
Version : 3, 2, 0, 30
Driver : NePhotoSource.ax
Version : 3,2,0,30
Driver : NePSMuxer.ax
Version : 3,2,0,30
Driver : NeQTDec.ax
Version : 3, 2, 0, 30
Driver : NeRender.ax
Version : 3,2,0,30
Driver : NeResize.ax
Version : 3, 2, 0, 30
Driver : neroadb.dll
Version : 3, 2, 0, 30
Driver : neroapl.dll
Version : 3, 2, 0, 30
Driver : NeroFormatConv.ax
Version : 3, 2, 0, 30
Driver : NeroVideoProc.ax
Version : 3,2,0,30
Driver : NeSceneDetector.ax
Version : 3,2,0,30
Driver : NeSplitter.ax
Version : 3, 2, 0, 30
Driver : NeVcd.ax
Version : 3,2,0,30
Driver : NeVCR.ax
Version : 3, 2, 0, 30
Driver : NeVcr.dll
Version : 3, 2, 0, 30
Driver : NeVideo.ax
Version : 3, 2, 0, 30
Driver : NeVideoAnalyzer.ax
Version : 3,2,0,30
Driver : AdvrCntr.dll
Version : 1,3,6, 2317
Driver : apreg.dll
Version : 2, 0, 0, 7
Driver : DriveLocker.dll
Version : 1, 0, 0, 17
Driver : MFC71.dll
Version : 7.10.3077.0
Driver : msvcp71.dll
Version : 7.10.3077.0
Driver : msvcr71.dll
Version : 7.10.3052.4
Driver : MultiChannel.dll
Version : 3,2,0,30
Driver : NeroCBUI.dll
Version : 1, 6, 0, 2
Driver : NeroDigitalExt.dll
Version : 1.1.1.1
Driver : NeroIPP.dll
Version : 3,2,0,30
Driver : NeroMediaCon.dll
Version : 3, 2, 0, 30
Driver : specialoffer.exe
Version : 1, 0, 0, 3
Lower Filters
-------------
Upper Filters
-------------
Driver : InCDPass
Description : Ahead RW Filter Driver
Version : 4, 3, 23, 2
Company : Nero AG
Driver : incdrm
Description : Ahead MRW Filter Driver
Version : 4, 3, 23, 2
Company : Nero AG
Video Codecs
------------
Cinepak Codec by Radius : 1.10.0.11
Intel 4|2|0 Video V2.50 : 5.1.2600.2180
Intel Indeo(R) Video R3.2
Intel Indeo(R) Video R3.2
Intel IYUV codec : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Microsoft RLE : 5.1.2600.2180 (xpsp_sp2_rtm.040803-2158)
Microsoft Video 1 : 5.1.2600.0 (xpclient.010817-1148)
Microsoft YUV : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Microsoft YUV : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Toshiba YUV Codec : 5.1.2600.0 (XPClient.010817-1148)
Microsoft YUV : 5.3.2600.2180 (xpsp_sp2_rtm.040803-2158)
Microsoft H.263 Video Codec : 5.1.2600.2180
Microsoft H.261 Video Codec : 5.1.2600.2180
Intel Indeo® Video 4.5 : 4.51.16.03
Indeo® video 5.10 : R.5.10.15.2.55
DivX® 5.2.1 Codec : 5.2.1.1328
XviD MPEG-4 Codec : n/a
3ivx D4 4.5.1 Pro Video Codec : 4, 5, 1, 30
Huffyuv v2.1.1 - CCESP Patch v0.2.5 : 2.1.1 - CCESP Patch v0.2.5
Microsoft Windows Media Video 9 : 9.0.1.0369
VP60® Simple Profile : 6,4,2,0
VP61® Advanced Profile : 6,4,2,0
VP62® Heightened Sharpness Profile : 6,4,2,0
VP31n Compressor : 3, 2, 6, 1 DT
Microsoft MPEG-4 Video Codec V1 : 4.1.00.3927
Microsoft MPEG-4 Video Codec V2 : 4.1.00.3927
Microsoft MPEG-4 Video Codec V3 : 4.1.00.3927
Audio Codecs
------------
Microsoft IMA ADPCM CODEC : 4.00.0.0
Microsoft ADPCM CODEC : 4.00.0.0
Microsoft CCITT G.711 A-Law and u-Law CODEC : 4.00.0.0
Microsoft GSM 6.10 Audio CODEC : 4.00.0.0
DSP Group TrueSpeech(TM) Software CODEC : 1.00.0.0
Microsoft G.723.1 CODEC : 1.02.0.1
Windows Media Audio : 4.02.0.0
Sipro Lab Telecom ACELP.net audio codec : 3.02.0.0
Fraunhofer IIS MPEG Layer-3 Codec (decode only) : 1.09.1.145
Indeo® audio software : 2.05.0.53
LAME MP3 Codec v0.9.0 - 3.96 (stable) : 4.00.0.0
AC-3 ACM Decompressor : 0.08.0.0
Microsoft PCM Converter : 5.00.0.0
ASPI Information
----------------
System ASPI : ASPI is not installed
Nero ASPI : ASPI is installed and working properly
WNASPI32.DLL : 2.0.1.74 164112 bytes November 02, 2004
Installed OS Patches
--------------------
(Q810090) USB Update : Yes
(Q329112) Multi-Border DVD with More Than 4 GB of Data Not Readable Past First Border : Yes
(Q812415) Problems with Multiple ATA devices : No
(Q322359) Intelide.sys Is Not Used on Computers with ICH4 or ICH5 : No
(Q320174) IMAPI Update - CDs recorded have missing files or errors : Yes
(Q311542) Devices May not power up properly when resuming from standby : Yes
(Q327086) Data Added to Removable Media During Hibernation May Be Lost When You Resume Windows XP : Yes
(Q308374) Ricoh 1394 Controller May Not Work with Windows XP : Yes
(Q314634) Windows XP Does Not Detect Your New USB Device : Yes
(Q822603) USB 1.1 and USB 2.0 update : No
(Q323507) Your IEEE 1394 or USB CD-ROM or DVD-ROM Drive May Not Be Recognized in Windows XP : No
(Q815834) 'Code 28' Error Message and a Yellow Exclamation Mark Next to a USB Device in Device Manager After Your Computer Resumes from Hibernation : No
(Q316575) Problems When You Swap a CD-ROM During Hibernation in Windows XP : No
(Q811789) Surprise Removal of 1394 Device Can Cause Bluescreen Error : Yes
(Q323322) Cannot Use Sony VAIO PCG-C1MRX Internal Camera with Windows Messenger After You Apply Q316397 : No
(Q811789) Surprise Removal of 1394 Device Can Cause Bluescreen Error : Yes
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
7. June 2006 @ 01:12 |
Link to this message
|
|
Can you post a Nero log file of your failed burn.
Logs located here Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
This message has been edited since posting. Last time this message was edited on 7. June 2006 @ 01:20
|
|
windychip
Newbie
|
7. June 2006 @ 07:18 |
Link to this message
|
I am not sure if the history will still be there because of my clean install -- which ended the burn fail and now has made Nero simply not see my source dvd as a readable dvd. It's very strange but here is what I did get off the history log that was there:
Kenneth Hughes
1A2300067135211971519516
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero Version: 6.6.0.8
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.8
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 237MB (243504kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.6.2006
Copy disc to image
10:06:57 AM #1 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:06:57 AM #2 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
10:07:22 AM #3 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:07:22 AM #4 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
10:07:22 AM #5 Phase 23 File dlgbrnst.cpp, Line 1832
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 6:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 6:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 6:08:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Kenneth Hughes
1A2300067135211971519516
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero Version: 6.6.0.8
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.8
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 238MB (244564kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.6.2006
Copy disc to image
10:09:02 AM #1 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:09:02 AM #2 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
10:09:02 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 6:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 6:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 6:08:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Kenneth Hughes
1A2300067135211971519516
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 9:35:32 AM
Nero Version: 6.6.0.8
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.0.8
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.0.8
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 238MB (243896kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.6.2006
Copy disc to image
10:22:42 AM #1 Text 0 File DlgWaitCD.cpp, Line 272
Write in overburning mode: NO (enabled: CD)
10:22:42 AM #2 Text 0 File DlgWaitCD.cpp, Line 438
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
10:22:42 AM #3 Phase 23 File dlgbrnst.cpp, Line 1832
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 12, 0, size=99200 bytes, created 1/27/2005 6:08:02 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 12, 0, size=28928 bytes, created 1/27/2005 6:07:34 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 12, 0, size=8704 bytes, created 1/27/2005 6:08:08 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Kenneth Hughes
1A2300067135211971519516
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 251MB (257580kB)
Memory in use : 50
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.6.2006
Copy disc to image
11:10:27 AM #1 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:10:27 AM #2 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
11:10:39 AM #3 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:10:39 AM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
11:10:39 AM #5 Phase 23 File dlgbrnst.cpp, Line 1685
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Kenneth Hughes
1A2300067135211971519516
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 249MB (255484kB)
Memory in use : 51
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.6.2006
Copy disc to image
11:30:54 AM #1 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:30:54 AM #2 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
11:30:54 AM #3 Phase 23 File dlgbrnst.cpp, Line 1685
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Kenneth Hughes
1A2300067135211971519516
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 242MB (248472kB)
Memory in use : 52
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.6.2006
Copy disc to image
11:47:16 PM #1 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:47:16 PM #2 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
11:47:56 PM #3 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:47:56 PM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
11:47:56 PM #5 Phase 23 File dlgbrnst.cpp, Line 1685
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Kenneth Hughes
1A2300067135211971519516
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.6.1.4
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C108 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 229MB (235144kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.6.2006
Copy disc to image
12:17:13 AM #1 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:17:13 AM #2 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
12:17:38 AM #3 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:17:38 AM #4 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: CD.)
12:17:38 AM #5 Phase 23 File dlgbrnst.cpp, Line 1685
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
Moderator
|
7. June 2006 @ 10:03 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 7. June 2006 @ 10:03
|
|
windychip
Newbie
|
7. June 2006 @ 16:44 |
Link to this message
|
thanks for your help...
I uninstalled InCD. I then uninstalled everything Nero on my computer and then I tried to run the general cleaner but it gave me an error message:
"Runtime Error! Program: C:/DOCUME~1/KENNET~1/LOCALS~1/Temp/RarSFX0/cleantool.exe
This application has requested the Runtime to terminate it in an unusual way. Please contact the application's support team for more information"
hUH...(pooty quivering lower lip...guivering more...)
wahhhhhhhahaahhaha....
|
|
windychip
Newbie
|
7. June 2006 @ 16:49 |
Link to this message
|
|
oh yea and I did the older drive update to my dell pc that you suggested even though it was a little scary with all the warnings of dire consequences. it seems to run fine playing dvd's. also installed the nero links you had listed for the older version.
This message has been edited since posting. Last time this message was edited on 7. June 2006 @ 17:00
|
|
windychip
Newbie
|
7. June 2006 @ 17:18 |
Link to this message
|
Well...it's attempting to burn now which is a step in the right direction but it fails...here's the burn log:
Ken
1A...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 221MB (226908kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.6.2006
===== Disc-Copy over image - 1st step : Copy to image ...
6:08:32 PM #1 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:08:32 PM #2 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
6:08:35 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
6:08:35 PM #4 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
6:08:35 PM #5 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 108288 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
6:08:35 PM #6 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 108288 = 108288, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
6:08:35 PM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:08:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
6:08:35 PM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:08:35 PM #10 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:08:35 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 108288 (108288) = #108288/24:3.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [Image Recorder]
--------------------------------------------------------------
6:08:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
6:08:35 PM #13 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
6:08:35 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:09:38 PM #15 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks
6:09:38 PM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:09:38 PM #17 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
6:09:43 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
6:09:43 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+RW GCA-4040N running
6:09:43 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 221773824
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=24:03.63 ( 108288) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Kenneth Hughes\My Documents\TempImage.nrg>
6:09:43 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
6:10:05 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
6:10:05 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
6:10:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
6:10:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
6:10:05 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 108288 (108288) = #108288/24:3.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
6:10:05 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
6:10:05 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
6:10:05 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
6:10:05 PM #13 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
6:10:05 PM #14 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x039A4E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00
6:10:05 PM #15 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400
6:10:05 PM #16 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
6:10:15 PM #17 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06E20000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
6:10:15 PM #18 CDR -1135 File Writer.cpp, Line 311
Write error
6:10:16 PM #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
6:10:16 PM #20 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
6:10:16 PM #21 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
6:10:17 PM #22 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
6:10:17 PM #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
7. June 2006 @ 17:46 |
Link to this message
|
One or two steps in the right direction so let's see if we can do a few more.
I see the firmware update was a success despite the dire warnings:)
Now the drive recogizes the media and is able to create the image.
Quote:
hanging the Book Type was finished with error, return code -400
Doesn't look like your drive can booktype - turn this option off.
Quote:
Last address to be written: 108287 ( 24:03.62, 211MB)
CD size.
Turn off the booktyping and let's see how that goes.
No need to recopy the the image - just try and burn it again.
|
|
windychip
Newbie
|
7. June 2006 @ 21:52 |
Link to this message
|
well...i tried to find book type and found it only on Nero express. I switched it off auto and to dvd (because there was no off entirely option. It burned one dvd copy and then crashed (I am trying to burn 20). I then tried the Nero burning software and could not find any booktype options and it did the same thing...burned one and crashed. I attached a log from that burn - crash sequence.
Can I ask you a couple questions oh genie of information?
1) what is the best software to use for burning dvd's?
2) Is my dvd burner an antique? What is the best to use currently for my dell pc laptop?
not that you would know these things but I just thought I would ask.
A million thanks again and may you get the best from your good karma you are generating helping hapless fools as myself.
be well, KH
KH
1A...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 276MB (282840kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.6.2006
===== Disc-Copy over image - 1st step : Copy to image ...
10:34:00 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:34:00 PM #2 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
10:34:00 PM #3 Text 0 File DVDCopy.cpp, Line 293
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 108288 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
10:34:00 PM #4 Text 0 File DVDCopy.cpp, Line 406
Max -1 tracks of 1 allowed to copy
1: 0 - 108288 = 108288, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
10:34:00 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:34:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
10:34:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:34:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:34:00 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 108288 (108288) = #108288/24:3.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [Image Recorder]
--------------------------------------------------------------
10:34:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
10:34:00 PM #11 Phase 120 File dlgbrnst.cpp, Line 1832
Creating the image for burning
10:34:00 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:35:04 PM #13 Text 0 File WriterStatus.cpp, Line 116
< Image Recorder > start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks
10:35:04 PM #14 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:35:04 PM #15 Phase 121 File dlgbrnst.cpp, Line 1832
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
10:35:09 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
10:35:09 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+RW GCA-4040N running
10:35:09 PM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 221773824
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=24:03.63 ( 108288) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Kenneth Hughes\Desktop\actreel.nrg>
10:35:09 PM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:35:35 PM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
10:35:35 PM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:35:35 PM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:35:35 PM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
10:35:35 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 108288 (108288) = #108288/24:3.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
10:35:35 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
10:35:35 PM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
10:35:35 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:35:35 PM #13 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10:35:35 PM #14 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A44E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00
10:35:35 PM #15 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400
10:35:35 PM #16 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:36:53 PM #17 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVD+RW GCA-4040N> start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks
10:36:53 PM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:39:00 PM #19 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:39:00 PM #20 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10:39:00 PM #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2.4x (3,324 KB/s)
10:39:29 PM #22 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
10:39:29 PM #23 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:39:29 PM #24 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:39:29 PM #25 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
10:39:29 PM #26 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
10:39:29 PM #27 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
10:39:29 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:39:29 PM #29 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10:39:29 PM #30 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03A44E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00
10:39:29 PM #31 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400
10:39:29 PM #32 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:39:36 PM #33 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06BF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
10:39:36 PM #34 CDR -1135 File Writer.cpp, Line 311
Write error
10:39:36 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:39:36 PM #36 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:39:36 PM #37 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:39:36 PM #38 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10:39:36 PM #39 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
7. June 2006 @ 22:21 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 7. June 2006 @ 22:21
|
|
windychip
Newbie
|
8. June 2006 @ 11:55 |
Link to this message
|
wah. I had done a few uninstalls after reading the posts and went to the lower versions...a couple times. But glad to try it again. So strange it burned a one or two and then crashes with the log below. I also tried dvdshrink and ripped the dvd and played it off the harddrive which seemed to automatically try to burn it and failed...I will put that log on a next message to keep them separate.
thanks, k
K
1A...
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 256MB (262340kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.6.2006
Burn DVD Image
9:57:18 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
9:57:18 AM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+RW GCA-4040N running
9:57:18 AM #3 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x40
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 221773824
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=00:00.00 ( 0) RecDep=0x00
1: Ctrl=0x41 Trk= 1 (0x01) Index=00 Start=00:00.00 ( 0) RecDep=0x00
2: Ctrl=0x41 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=24:03.63 ( 108288) RecDep=0x00
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <C:\Documents and Settings\Kenneth Hughes\Desktop\kenact.nrg>
9:57:18 AM #4 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:57:38 AM #5 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
9:57:38 AM #6 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
9:57:38 AM #7 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
9:57:38 AM #8 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
9:57:38 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 108288 (108288) = #108288/24:3.63
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108288 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
9:57:38 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
9:57:38 AM #11 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
9:57:39 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:57:39 AM #13 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
9:57:39 AM #14 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04BB1400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00
9:57:39 AM #15 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400
9:57:39 AM #16 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
9:58:55 AM #17 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVD+RW GCA-4040N> start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks
9:58:55 AM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:01:03 AM #19 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:01:03 AM #20 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10:01:03 AM #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2.4x (3,324 KB/s)
10:01:30 AM #22 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
10:01:30 AM #23 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:01:30 AM #24 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:01:30 AM #25 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
10:01:30 AM #26 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
10:01:30 AM #27 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
10:01:30 AM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:01:30 AM #29 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10:01:30 AM #30 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04BB1400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00
10:01:30 AM #31 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400
10:01:30 AM #32 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:02:54 AM #33 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVD+RW GCA-4040N> start writing Lead-Out at LBA 108288 (1A700h), lenght 0 blocks
10:02:55 AM #34 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:05:05 AM #35 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:05:05 AM #36 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10:05:05 AM #37 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 2.4x (3,324 KB/s)
10:05:28 AM #38 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108287 ( 24:03.62, 211MB)
10:05:28 AM #39 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:05:28 AM #40 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
10:05:28 AM #41 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW.)
10:05:28 AM #42 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 221773824, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108288 | lead-out | 1 | 0x41 | 0x00
10:05:28 AM #43 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
10:05:28 AM #44 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:05:28 AM #45 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10:05:28 AM #46 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04BB1400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00
10:05:28 AM #47 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400
10:05:28 AM #48 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:05:38 AM #49 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04AB0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
10:05:38 AM #50 CDR -1135 File Writer.cpp, Line 311
Write error
10:05:38 AM #51 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:05:38 AM #52 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:05:38 AM #53 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:05:38 AM #54 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10:05:38 AM #55 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
windychip
Newbie
|
8. June 2006 @ 12:01 |
Link to this message
|
dvdshrink burn fail log:
1A?
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: C111 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 195MB (200504kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.6.2006
NeroAPI
12:27:05 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
12:27:05 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
12:27:05 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
12:27:05 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
12:27:05 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:27:05 PM #6 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVD+RW GCA-4040N running
12:27:05 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:27:05 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:27:05 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:29:08 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 108527 ( 24:07.02, 211MB)
12:29:08 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
12:29:08 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: SONY, Media Type ID: D11, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:29:08 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW.)
12:29:08 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 108528 (108528) = #108528/24:7.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 108528 blocks [HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
12:29:08 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 222265344, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
108528 | lead-out | 1 | 0x41 | 0x00
12:29:08 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:29:08 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:29:08 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:29:08 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
12:29:08 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:29:08 PM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: SONY....
Media type ID: D11
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 53 4F 4E 59 00 - 00 00 00 44 31 31 00 38 ...SONY....D11.8
23 54 37 14 00 32 6F 00 - 96 6A 17 19 0C 0C 0A 0B #T7..2o..j......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
12:29:08 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04654E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 0x00 0x2B 0x52 0x54 0x42 0x00 0x00 0x04 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x14 0x00
12:29:08 PM #23 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -400
12:29:08 PM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
12:29:18 PM #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06040000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0E
0x00 0x00 0x00 0x00 0x0C 0x80
12:29:18 PM #26 CDR -1135 File Writer.cpp, Line 311
Write error
12:29:18 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:29:18 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:29:18 PM #29 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
12:29:18 PM #30 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
12:29:18 PM #31 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
12:29:18 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
12:29:18 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 1:07:32 PM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
8. June 2006 @ 14:59 |
Link to this message
|
|
I know you are using Sony media, are you using +R or -R type discs.
|
Moderator
|
8. June 2006 @ 16:00 |
Link to this message
|
Hi windychip
At least your having some success ;)
Now for your questions:
1) what is the best software to use for burning dvd's?
Nero is good. Another program to burn images w/ is DVD Decrypter. Will also autoburn w/ Shrink and it's Free!
2) Is my dvd burner an antique? What is the best to use currently for my dell pc laptop?
Well I said it was older - antique not quite yet:)
The last update on this drive was almost 2 years ago. Plus max burn is 4x and it only supports +R DVD's. The Sony 8x +R's you using are good but it's hit or miss on your drive. it's probably on it's wasy out.
Me - yes I would replace it - so much better drives out there now!! Dependiing on your budget a 16x quality drive from (us)$40 (BenQ) - top notch Plextor - $100.
In the mean time try & pick up some Verbatim's - max 8x.
|
|
windychip
Newbie
|
8. June 2006 @ 16:26 |
Link to this message
|
|
Gwendolyn: dvd+
Those are all my burner can handle.
Although I wonder if these
Binkie:
Can you clarify some of those burners you mentioned I didn't get the abbreviations??
I love the ideas on software and the burners. I keep hearing that maybe this burner is dated and I need another. I just hate wasting working equipment because I have not learned something so I will bang away at this problem until I am certain it is not me or some other obvious and easy issue.
thanks to both of you...I really am learning a lot...slowly...
ciao, K
|
Moderator
|
8. June 2006 @ 17:13 |
Link to this message
|
|
Actually they're not abbreviations (some typos per usual in my post though:)
BenQ & Plextor are both the names. Another good one LiteOn. All support booktyping.
The problem with older burners is if they haven't been updated in awhile they don't handle the newer media well. The firmware is what keeps the drive up to speed on the media & how to write to it.
Once your's was updated it picked up the media name and media id.
Now it's just hit or miss writing to it.
So switch the media - try the verbs. But again look for verbs that burn no faster than 8x - 4x would be preferable but slower media is getting harder to find in some places.
Bang away a little more w/ some different media. See what happens.
Keep us posted too!!
Oh and you're welcome!!
|
|
windychip
Newbie
|
9. June 2006 @ 08:09 |
Link to this message
|
|
A few more questions on the burners. Because I have a laptop would you think I should get an external? 1394 firewire or USB? Same brands?
appreciate your suggestions...
oh yea, I realized (us) meant u.s. dollars...duh! thought that was secret tech language for us, as a group of burners, that unite in some mathematical formula to... oh nevermind, I digress.
|
Moderator
|
9. June 2006 @ 14:18 |
Link to this message
|
|
lol - no secret code :)
For a laptop - same ones - just get an external USB port one. More than likely I would think your laptop has a 2.0 USB hub.
edit: spelling :)
This message has been edited since posting. Last time this message was edited on 9. June 2006 @ 14:19
|
|
windychip
Newbie
|
13. June 2006 @ 11:21 |
Link to this message
|
|
So...I beat on Dell even though their tests on my computer showed that my DVD burner should work, I kept pointing out..."it's not working."
They finally decided to send me a new burner however reluctantly. I put it in and had some problems...then restarted and it is magic! It works and it makes me smile.
To Dells credit. They sent it in 24 hours and they did send it.
The sent me: _NEC DVD+-RW ND-6650A
cheers, K
|
|
Advertisement
|
|
|
Moderator
|
13. June 2006 @ 16:23 |
Link to this message
|
Glad to hear you're finally smiling :0)
Dell is usually pretty good (from the little I've seen) about replacing drives.
Your now have a drive that will burn to both formats and dual layer too!
Just check Dell's site or here (make sure it says for Dell pc) to keep the firmware update:
http://forum.rpc1.org/dl_search.php
That and good media and you should be good to go!
Happy Burning!
|
|
