|
|
|
Many different burn failure errors -- is my drive really dying?
|
|
|
spyskip
Newbie
|
12. June 2006 @ 21:45 |
Link to this message
|
|
Hi. I own a Toshiba Satellite M35. It comes with a Matshita DVD-RAM UJ-820S writer. My software of choice is Nero Burning ROM 6.6.18. I used to have absolutely no problem with burning on pretty much any brand of media. However, lately, I've repeatedly gotten errors on brands I used to have no problem with.
Sometimes, the drive cannot read DVDs that I've burned with it. It says there's an unspecified I/O device error. This is irritating enough, but since I have another computer with a DVD-ROM drive and I can get the data from there, I can live with that.
However, the last 7 DVDs I've tried to burn have all failed to be completed. I get the range of errors from "illegal disc error" to "unspecified target error" to "could not perform end of disc-at-once" to "power calibration error".
I do use the drive a lot, and have burned hundreds and hundreds of DVDs and CDs on it.
Is it just dying due to overuse? Do I have no recourse but to purchase an external burner for my laptop? I've read a few threads and have seen suggestions about firmware upgrades, but according to other sites, Matshita hasn't provided any. I'd appreciate any input from someone more knowledgeable than I.
Thank you very much!
This message has been edited since posting. Last time this message was edited on 12. June 2006 @ 21:48
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
12. June 2006 @ 22:00 |
Link to this message
|
Can you post a Nero history log of your last failed burn, they are located here
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx
|
|
spyskip
Newbie
|
12. June 2006 @ 22:07 |
Link to this message
|
The log for when it did not work (power calibration error):
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/23/2004 8:33:44 AM
Nero version: 6.3.1.25
Recorder: <MATSHITA DVD-RAM UJ-820S>Version: 1.00 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA DVD-RAM UJ-820S >Version: 1.00 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : MATSHITA DVD-RAM UJ-820S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-820S D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523184kB)
Free physical memory: 51MB (52320kB)
Memory in use : 89 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.6.2006
ISO compilation
11:11:39 AM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:11:39 AM #2 Text 0 File Reader.cpp, Line 126
Reader running
11:11:39 AM #3 Text 0 File Writer.cpp, Line 124
Writer MATSHITA DVD-RAM UJ-820S running
11:11:39 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:11:40 AM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
11:11:40 AM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2292719 (509:29.44, 4477MB)
11:11:40 AM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
11:11:40 AM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: MATSHITA DVD-RAM UJ-820S, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
11:11:40 AM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:11:40 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2292720 (2292720) = #2292720/509:29.45
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2292720 blocks [MATSHITA DVD-RAM UJ-820S ]
--------------------------------------------------------------
11:11:40 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [MATSHITA DVD-RAM UJ-820S ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4695490560, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2292720 | lead-out | 1 | 0x00 | 0x41
11:11:40 AM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
11:12:47 AM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
11:12:47 AM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
11:12:47 AM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 2.4x (3,324 KB/s)
11:12:47 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:12:47 AM #17 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R02
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 52 30 32 03 38 ...RICOHJPNR02.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
11:12:47 AM #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 23:50,087 (1430087ms) -> OK
11:12:47 AM #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
11:13:37 AM #20 Text 0 File Cdrdrv.cpp, Line 1297
11:13:37.196 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
11:14:00 AM #21 SCSI -1106 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03520000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x19 0x25 0x73 0x03
11:14:00 AM #22 CDR -1106 File Writer.cpp, Line 304
Power calibration error
11:14:00 AM #23 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
11:14:00 AM #24 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
11:14:00 AM #25 SCSI -1106 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x19 0x25 0x73 0x03
11:14:00 AM #26 SCSI -1106 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x19 0x25 0x73 0x03
11:14:00 AM #27 Phase 127 File dlgbrnst.cpp, Line 1855
Generating DVD high compatibility borders
11:14:00 AM #28 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
11:14:00 AM #29 CDR -1106 File WriterStatus.cpp, Line 164
Power calibration error
11:14:00 AM #30 TRANSFER -24 File WriterStatus.cpp, Line 164
Could not perform end of Disc-at-once
11:14:00 AM #31 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
11:14:00 AM #32 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.132 , size=24698 bytes, created 10/23/2003 11:15:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
The log for when it did work, but stopped mid-burn:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <MATSHITA DVD-RAM UJ-820S>Version: 1.00 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <MATSHITA DVD-RAM UJ-820S >Version: 1.00 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : TOSHIBA MK8025GAS atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : MATSHITA DVD-RAM UJ-820S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-820S D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523184kB)
Free physical memory: 202MB (207356kB)
Memory in use : 60
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.6.2006
ISO compilation
1:07:43 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:07:44 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
1:07:44 PM #3 Text 0 File Writer.cpp, Line 122
Writer MATSHITA DVD-RAM UJ-820S running
1:07:44 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:07:45 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:07:45 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2295087 (510:01.12, 4482MB)
1:07:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
1:07:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MATSHITA DVD-RAM UJ-820S, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R02, Product revision number: 3
Disc Application Code: 0, Extended Information Indicators: 3
1:07:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:07:45 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2295088 (2295088) = #2295088/510:1.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2295088 blocks [MATSHITA DVD-RAM UJ-820S]
--------------------------------------------------------------
1:07:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MATSHITA DVD-RAM UJ-820S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4700340224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2295088 | lead-out | 1 | 0x41 | 0x00
1:07:46 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:10:32 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
1:10:32 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:10:32 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
1:10:33 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:10:33 PM #17 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R02
Product revision number: 3
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 52 30 32 03 38 ...RICOHJPNR02.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
1:10:33 PM #18 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
1:11:04 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
13:11:04.179 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:41 PM #20 Text 0 File Cdrdrv.cpp, Line 1288
13:11:41.142 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:41 PM #21 Text 0 File Cdrdrv.cpp, Line 1288
13:11:41.392 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:41 PM #22 Text 0 File Cdrdrv.cpp, Line 1288
13:11:41.422 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:41 PM #23 Text 0 File Cdrdrv.cpp, Line 1288
13:11:41.522 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:46 PM #24 Text 0 File Cdrdrv.cpp, Line 1288
13:11:46.099 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:48 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
13:11:48.062 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:48 PM #26 Text 0 File Cdrdrv.cpp, Line 1288
13:11:48.242 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:11:48 PM #27 Text 0 File Cdrdrv.cpp, Line 1288
13:11:48.272 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:00 PM #28 Text 0 File Cdrdrv.cpp, Line 1288
13:12:00.720 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:00 PM #29 Text 0 File Cdrdrv.cpp, Line 1288
13:12:00.820 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:00 PM #30 Text 0 File Cdrdrv.cpp, Line 1288
13:12:00.920 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:02 PM #31 Text 0 File Cdrdrv.cpp, Line 1288
13:12:02.042 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:04 PM #32 Text 0 File Cdrdrv.cpp, Line 1288
13:12:04.455 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:04 PM #33 Text 0 File Cdrdrv.cpp, Line 1288
13:12:04.566 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:14 PM #34 Text 0 File Cdrdrv.cpp, Line 1288
13:12:14.340 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:16 PM #35 Text 0 File Cdrdrv.cpp, Line 1288
13:12:16.222 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:16 PM #36 Text 0 File Cdrdrv.cpp, Line 1288
13:12:16.312 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:17 PM #37 Text 0 File Cdrdrv.cpp, Line 1288
13:12:17.484 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:20 PM #38 Text 0 File Cdrdrv.cpp, Line 1288
13:12:20.318 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:20 PM #39 Text 0 File Cdrdrv.cpp, Line 1288
13:12:20.358 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:20 PM #40 Text 0 File Cdrdrv.cpp, Line 1288
13:12:20.388 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:20 PM #41 Text 0 File Cdrdrv.cpp, Line 1288
13:12:20.418 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:29 PM #42 Text 0 File Cdrdrv.cpp, Line 1288
13:12:29.251 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:41 PM #43 Text 0 File Cdrdrv.cpp, Line 1288
13:12:41.188 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:12:42 PM #44 Text 0 File Cdrdrv.cpp, Line 1288
13:12:42.801 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:13:20 PM #45 Text 0 File Cdrdrv.cpp, Line 1288
13:13:20.915 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:13:23 PM #46 Text 0 File Cdrdrv.cpp, Line 1288
13:13:23.008 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:13:23 PM #47 Text 0 File Cdrdrv.cpp, Line 1288
13:13:23.229 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:13:38 PM #48 Text 0 File Cdrdrv.cpp, Line 1288
13:13:38.020 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:13:44 PM #49 Text 0 File Cdrdrv.cpp, Line 1288
13:13:44.369 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:13:50 PM #50 Text 0 File Cdrdrv.cpp, Line 1288
13:13:50.067 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:13:55 PM #51 Text 0 File Cdrdrv.cpp, Line 1288
13:13:55.155 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:08 PM #52 Text 0 File Cdrdrv.cpp, Line 1288
13:14:08.914 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:18 PM #53 Text 0 File Cdrdrv.cpp, Line 1288
13:14:18.789 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:34 PM #54 Text 0 File Cdrdrv.cpp, Line 1288
13:14:34.301 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:34 PM #55 Text 0 File Cdrdrv.cpp, Line 1288
13:14:34.471 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:41 PM #56 Text 0 File Cdrdrv.cpp, Line 1288
13:14:41.992 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:43 PM #57 Text 0 File Cdrdrv.cpp, Line 1288
13:14:43.855 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:47 PM #58 Text 0 File Cdrdrv.cpp, Line 1288
13:14:47.590 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:14:49 PM #59 Text 0 File Cdrdrv.cpp, Line 1288
13:14:49.573 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:15:04 PM #60 Text 0 File Cdrdrv.cpp, Line 1288
13:15:04.725 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:15:26 PM #61 Text 0 File Cdrdrv.cpp, Line 1288
13:15:26.626 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:15:34 PM #62 Text 0 File Cdrdrv.cpp, Line 1288
13:15:34.167 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:15:35 PM #63 Text 0 File Cdrdrv.cpp, Line 1288
13:15:35.970 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:15:54 PM #64 Text 0 File Cdrdrv.cpp, Line 1288
13:15:54.156 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:15:54 PM #65 Text 0 File Cdrdrv.cpp, Line 1288
13:15:54.336 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:15:54 PM #66 Text 0 File Cdrdrv.cpp, Line 1288
13:15:54.406 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:02 PM #67 Text 0 File Cdrdrv.cpp, Line 1288
13:16:02.688 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:10 PM #68 Text 0 File Cdrdrv.cpp, Line 1288
13:16:10.820 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:15 PM #69 Text 0 File Cdrdrv.cpp, Line 1288
13:16:15.977 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:17 PM #70 Text 0 File Cdrdrv.cpp, Line 1288
13:16:17.720 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:20 PM #71 Text 0 File Cdrdrv.cpp, Line 1288
13:16:20.514 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:26 PM #72 Text 0 File Cdrdrv.cpp, Line 1288
13:16:26.833 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:28 PM #73 Text 0 File Cdrdrv.cpp, Line 1288
13:16:28.445 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:29 PM #74 Text 0 File Cdrdrv.cpp, Line 1288
13:16:29.366 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:33 PM #75 Text 0 File Cdrdrv.cpp, Line 1288
13:16:33.032 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:34 PM #76 Text 0 File Cdrdrv.cpp, Line 1288
13:16:34.884 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:36 PM #77 Text 0 File Cdrdrv.cpp, Line 1288
13:16:36.016 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:47 PM #78 Text 0 File Cdrdrv.cpp, Line 1288
13:16:47.623 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:16:57 PM #79 Text 0 File Cdrdrv.cpp, Line 1288
13:16:57.096 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:17:31 PM #80 Text 0 File Cdrdrv.cpp, Line 1288
13:17:31.926 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:17:38 PM #81 Text 0 File Cdrdrv.cpp, Line 1288
13:17:38.426 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:17:39 PM #82 Text 0 File Cdrdrv.cpp, Line 1288
13:17:39.527 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:17:41 PM #83 Text 0 File Cdrdrv.cpp, Line 1288
13:17:41.150 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:17:43 PM #84 Text 0 File Cdrdrv.cpp, Line 1288
13:17:42.992 - MATSHITA DVD-RAM UJ-820S\H1 T0 : Queue again later
1:17:47 PM #85 SCSI -400 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x038C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x03
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x05 0x0A 0xC0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF1 0x00 0x04 0x00 0x05 0x07 0xD0 0x0A
0x00 0x29 0x00 0x00 0x03 0x00
1:17:47 PM #86 CDR -400 File Writer.cpp, Line 311
Unspecified target error
1:17:48 PM #87 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:17:48 PM #88 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:17:56 PM #89 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x82 0x00 0x00 0x30 0x05
1:17:56 PM #90 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
1:17:56 PM #91 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
1:17:56 PM #92 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.132 , size=24698 bytes, created 10/23/2003 11:15:02 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/12/2005 6:28:09 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
12. June 2006 @ 22:36 |
Link to this message
|
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=6.2.0.132 , size=24698 bytes, created 10/23/2003
You have Roxio installed, it clashes with Nero so I would recommend uninstalling it by running this zapper
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Apart from that your log looks pretty clean however I cannot access my firmware page to check if your's is current.
Depends on the age of your burner whether it will accept some of the Newer discs available.
|
|
Advertisement
|
|
|
|
spyskip
Newbie
|
13. June 2006 @ 03:24 |
Link to this message
|
After having surfed more around the web, I don't think mine is the newest firmware. It's 1.00 and I think there's a newer one here? http://forum.rpc1.org/dl_firmware.php?download_id=2127
However, I am new to all of this and tried to run the upgrade simply by unzipping the downloaded 1003_PN.zip and double-clicking the exe file. When I did, I got the following error: "Wrong Firmware Data file is selected."
If someone would be so kind as to point me in the right direction on how to upgrade my firmware, I'd be happy to try that.
I did zap Roxio. Thanks for the link to the software!
This message has been edited since posting. Last time this message was edited on 13. June 2006 @ 03:25
|
|
