Nero burning problem

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Thursday 26.2.2026 / 09:19

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > nero burning problem

Browse by topic

Forums

Start a new thread

Nero burning problem

Jump to:

Posted

Message

jimbcfc

Junior Member

13. June 2006 @ 04:16

Link to this message

Am using version Nero 7 Ultra edition. When I am burning a disk, it works the 1st time, then although no error messages appear, when I burn it for a 2nd time, it says that Nero has burned it ok, there is definitely something burnt in the disk, but the disk is not recognised??!!

I have tried:

1. re-installing Nero
2. Different makes of disk

I am currently wasting loads of disk where I think it has burned, but disk not recognised. Any ideas?

[ + quote]

waynekusa

Member

13. June 2006 @ 05:08

Link to this message

I understand that all versions of Nero 7.x.x.x are full of bugs except for version 7.0.8.2. If you are running any other version, that may be your problem.

Get the Clean Tool for Nero 7 from here: http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html

Get Nero 7.0.8.2 here: http://www.filehippo.com/download_nero_7_premium/?845

Make sure that you have your serial number before you uninstall your current version.

Good Luck!

[ + quote]

Antec TX1050B Case w/500W Power Supply
ASUS P4P800SE
Intel P4 HT 3.2 OC'd 3.85
Zalman CNPS9500 Heatsink/CPU Fan
4GB PC3200 Dual Channel DDR RAM
Nvidia 6800 OC'd
500GB SATA Raid 0
Lite-On 832 DVD
HP 740b DVD

This message has been edited since posting. Last time this message was edited on 13. June 2006 @ 05:08

jimbcfc

Junior Member

13. June 2006 @ 06:13

Link to this message

Cheers for that, where do I get the serial number from?

[ + quote]

This message has been edited since posting. Last time this message was edited on 17. June 2006 @ 04:58

waynekusa

Member

13. June 2006 @ 06:28

Link to this message

Quote:
Where is the Nero/NeroExpress serial number located?

For the Nero retail version, the serial number is located on the back side of the paper sleeve the Nero CD came in.
For OEM version, the serial number is located on the back side of the paper sleeve the Nero CD came in.
For OEM bundles, such as Yamaha, TDK, Memorex, Lite-On, etc. you do not need a serial number, as it is embedded and will install automatically. After a successful installation, you can find your serial number located in your registry.
Follow the steps below in order to locate it:
1) Click on ´Start --> Run´ and type in ´REGEDIT´.
2) Click on ´OK´, which opens the Registry Editor.
3) Click on the folders ´HKEY_LOCAL_MACHINE > SOFTWARE > Nero > Nero BURNING-ROM > INFO´.
4) You will see your serial number on the right-hand side of the Registry Editor, with following name (related to the respective version you have): Serial4, Serial5 or Serial6
This entry looks as follows:
1C80-xxxx-xxxx-xxxx-xxxx-xxxx-xxxx (for Nero 7)
Please note the number.

Yes, you really should run the clean tool whenever you uninstall/reinstall Nero. It will clean up any trash left behind.

If you'll post a log of your failed burn, perhaps we can give you more focused assistance.

[ + quote]

gwendolin

AfterDawn Addict

13. June 2006 @ 14:11

Link to this message

Quote:
Cheers for that, where do I get the serial number from?

Is this still worth doing even though I have completely removed Nero with soem kind of program and re-installed the version above. Two other people have installed this version from the same disk and it works fine for them?

It seems from this statement you are "Sharing" your copy of Nero which I believe is illegal. If you want to use a legitimate serial number you will have to purchase one from Nero

[ + quote]

guide by ScubaPete http://www.dvdplusvideo.com/tutorial007.html Nero guide by alkohol http://www.dvdplusvideo.com/Guides/alkohol_guide3.html

New RipIt4Me + DVD Shrink + ImgBurn guid <==== Rip any DVDs http://forums.afterdawn.com/thread_view.cfm/422740 Guides by bbmayo..... http://webpages.charter.net/bacitup/

ddp

Moderator

13. June 2006 @ 17:47

Link to this message

jimbcfc, read the forum rules above about posting & piracy as piracy is not condoned on this site.

[ + quote]

jimbcfc

Junior Member

17. June 2006 @ 01:32

Link to this message

Many apologies......

[ + quote]

gwendolin

AfterDawn Addict

17. June 2006 @ 01:40

Link to this message

If you wish to post a Nero log file, from here
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx

we can take a look for you.

[ + quote]

jimbcfc

Junior Member

17. June 2006 @ 03:55

Link to this message

Thanks, do I post it here or pm it to you?

[ + quote]

gwendolin

AfterDawn Addict

17. June 2006 @ 03:56

Link to this message

Please post it here,

[ + quote]

jimbcfc

Junior Member

17. June 2006 @ 04:09

Link to this message

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 123MB (126644kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
Burn DVD Image
12:04:42 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

12:04:42 #2 Text 0 File Reader.cpp, Line 124
Reader running

12:04:42 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

12:04:42 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

12:04:43 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 899984 (199:59.59, 1757MB)

12:04:43 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

12:04:43 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

12:04:43 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:04:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 899985 (899985) = #899985/199:59.60
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

12:04:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
899985 | lead-out | 1 | 0x41 | 0x00

12:04:43 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:04:43 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:04:43 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

12:04:43 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:04:43 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

12:04:43 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03f66600: Len x2

12:04:43 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

12:16:37 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks

12:16:37 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:17:01 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 123MB (126492kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
Burn DVD Image
12:46:37 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

12:46:37 #2 Text 0 File Reader.cpp, Line 124
Reader running

12:46:37 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

12:46:37 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

12:46:37 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 899984 (199:59.59, 1757MB)

12:46:37 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

12:46:37 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

12:46:37 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:46:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 899985 (899985) = #899985/199:59.60
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

12:46:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
899985 | lead-out | 1 | 0x41 | 0x00

12:46:37 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:46:37 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:46:37 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

12:46:37 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:46:37 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

12:46:37 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03f75400: Len x2

12:46:37 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

12:58:32 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks

12:58:32 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

12:59:11 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 120MB (123312kB)
Memory in use : 76
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
Burn DVD Image
13:16:25 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

13:16:25 #2 Text 0 File Reader.cpp, Line 124
Reader running

13:16:25 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

13:16:25 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

13:16:25 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 899984 (199:59.59, 1757MB)

13:16:25 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

13:16:25 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

13:16:25 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:16:25 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 899985 (899985) = #899985/199:59.60
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

13:16:25 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
899985 | lead-out | 1 | 0x41 | 0x00

13:16:25 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:16:25 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:16:25 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

13:16:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

13:16:25 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

13:16:25 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03f64e00: Len x2

13:16:25 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

13:28:20 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks

13:28:21 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:28:44 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

13:30:02 #21 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 899984 (199:59.59, 1757MB)

13:30:02 #22 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

13:30:02 #23 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

13:30:02 #24 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW.)

13:30:02 #25 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
899985 | lead-out | 1 | 0x41 | 0x00

13:30:02 #26 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:30:02 #27 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:30:02 #28 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

13:30:02 #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

13:30:02 #30 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

13:30:02 #31 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

13:42:00 #32 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks

13:42:00 #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:42:38 #34 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
(Nero Express)
Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 115MB (118720kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
Burn DVD Image
14:07:24 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

14:07:24 #2 Text 0 File Reader.cpp, Line 124
Reader running

14:07:24 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

14:07:24 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

14:07:24 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 899984 (199:59.59, 1757MB)

14:07:24 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

14:07:24 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

14:07:24 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

14:07:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 899985 (899985) = #899985/199:59.60
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

14:07:24 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
899985 | lead-out | 1 | 0x41 | 0x00

14:07:24 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

14:07:24 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

14:07:24 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

14:07:25 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

14:07:25 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

14:07:25 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03ef4200: Len x2

14:07:25 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes

14:19:20 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks

14:19:20 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

14:19:59 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 118MB (121764kB)
Memory in use : 76
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
Burn DVD Image
15:45:48 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

15:45:48 #2 Text 0 File Reader.cpp, Line 124
Reader running

15:45:48 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

15:45:48 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

15:45:48 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 899984 (199:59.59, 1757MB)

15:45:48 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

15:45:48 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

15:45:48 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:45:48 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 899985 (899985) = #899985/199:59.60
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

15:45:48 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
899985 | lead-out | 1 | 0x41 | 0x00

15:45:48 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

15:45:48 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

15:45:48 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

15:45:49 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

15:45:49 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

15:45:49 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03f5de00: Len x2

15:45:49 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

15:57:47 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks

15:57:47 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

15:58:26 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 158MB (162812kB)
Memory in use : 68
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

12.6.2006
Burn DVD Image
18:43:03 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

18:43:03 #2 Text 0 File Reader.cpp, Line 124
Reader running

18:43:03 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

18:43:03 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

18:43:03 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 899984 (199:59.59, 1757MB)

18:43:03 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

18:43:03 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD-R
Disc Manufacturer: RITEKG - 03
Disc Application Code: 64, Disc Physical Code: 193

18:43:03 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

18:43:03 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 899985 (899985) = #899985/199:59.60
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 899985 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

18:43:03 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1843169280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
899985 | lead-out | 1 | 0x41 | 0x00

18:43:03 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

18:43:03 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

18:43:03 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2x (2,770 KB/s)

18:43:03 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

18:43:03 #15 Text 0 File DVDR.cpp, Line 2786
Recording mode: Sequential Recording Mode for Multisession

18:43:03 #16 Text 0 File DVDR.cpp, Line 2942
Start write address at LBA 0
DVD high compatibility mode: Yes

18:43:03 #17 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 30000 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

18:54:44 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 899985 (DBB91h), length 0 blocks

18:54:44 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

18:54:45 #20 Text 0 File DVDR.cpp, Line 3182
EndDAO: Last written address was 899983

18:54:49 #21 Phase 133 File dlgbrnst.cpp, Line 1730
Writing short lead-out

18:56:00 #22 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 2x (2,770 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 145MB (149256kB)
Memory in use : 71
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.6.2006
Burn DVD Image
09:37:00 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

09:37:00 #2 Text 0 File Reader.cpp, Line 124
Reader running

09:37:00 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

09:37:00 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

09:37:00 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1813764 (403:03.39, 3542MB)

09:37:00 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

09:37:00 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

09:37:00 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

09:37:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

09:37:00 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1813765 | lead-out | 1 | 0x41 | 0x00

09:37:00 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

09:37:00 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

09:37:00 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

09:37:01 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

09:37:01 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

09:37:01 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03edfe00: Len x2

09:37:01 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

10:00:36 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks

10:00:36 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:01:19 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 157MB (161180kB)
Memory in use : 69
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.6.2006
Burn DVD Image
10:12:28 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

10:12:28 #2 Text 0 File Reader.cpp, Line 124
Reader running

10:12:28 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

10:12:28 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

10:12:28 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1813764 (403:03.39, 3542MB)

10:12:28 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

10:12:28 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

10:12:28 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

10:12:28 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

10:12:28 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1813765 | lead-out | 1 | 0x41 | 0x00

10:12:28 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

10:12:28 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

10:12:28 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

10:12:29 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

10:12:29 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

10:12:29 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03edfe00: Len x2

10:12:29 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

10:35:52 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks

10:35:52 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

10:36:37 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 137MB (140300kB)
Memory in use : 73
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.6.2006
Burn DVD Image
12:59:56 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

12:59:56 #2 Text 0 File Reader.cpp, Line 124
Reader running

12:59:56 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

12:59:56 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

12:59:56 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1813764 (403:03.39, 3542MB)

12:59:56 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

12:59:57 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

12:59:57 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

12:59:57 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

12:59:57 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1813765 | lead-out | 1 | 0x41 | 0x00

12:59:57 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

12:59:57 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

12:59:57 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

12:59:57 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

12:59:57 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

12:59:57 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03f6a200: Len x2

12:59:57 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

13:13:05 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks

13:13:06 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:13:51 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32

NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3

Recorder: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD/DVDW TS-L532A>Version: TM30 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : IC25N060ATMR04-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: On

=== CDRom-Device-Map ===
TSSTcorp CD/DVDW TS-L532A D: CDRom0
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 55MB (56604kB)
Memory in use : 89
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

13.6.2006
Burn DVD Image
13:31:37 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory

13:31:37 #2 Text 0 File Reader.cpp, Line 124
Reader running

13:31:37 #3 Text 0 File Writer.cpp, Line 113
Writer D: TSSTcorp CD/DVDW TS-L532A running

13:31:37 #4 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media

13:31:37 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1813764 (403:03.39, 3542MB)

13:31:37 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)

13:31:37 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: TSSTcorp CD/DVDW TS-L532A, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7

13:31:37 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:31:37 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1813765 (1813765) = #1813765/403:3.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1813765 blocks [D: TSSTcorp CD/DVDW TS-L532A]
--------------------------------------------------------------

13:31:37 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: TSSTcorp CD/DVDW TS-L532A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3714590720, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1813765 | lead-out | 1 | 0x41 | 0x00

13:31:37 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME

13:31:37 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME

13:31:37 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)

13:31:37 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0

13:31:37 #15 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

13:31:37 #16 SPTI -1065 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFF 06 10 00 00 00 00 00 00 00 00 AA
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03edfe00: Len x2

13:31:37 #17 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No

13:44:49 #18 Text 0 File WriterStatus.cpp, Line 116
<D: TSSTcorp CD/DVDW TS-L532A> start writing Lead-Out at LBA 1813765 (1BAD05h), length 0 blocks

13:44:49 #19 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion

13:45:33 #20 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)

Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 15:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 05/12/2005 06:12:26 (Prassi/Veritas driver for win 2K)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero Burning ROM, History File *** ======

[ + quote]

This message has been edited since posting. Last time this message was edited on 17. June 2006 @ 04:57

gwendolin

AfterDawn Addict

17. June 2006 @ 04:16

Link to this message

Nero API version: 7.2.0.3 and 7.2.0.3b

These latest versions of Nero are full of bugs, I recommend you uninstall, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then install 7.0.8.2 a more stable version from here
http://www.filehippo.com/download_nero_7_premium/?845

Quote:
CdRomPeripheral : TSSTcorp CD/DVDW TS-L532A atapi Port 1 ID 0 DMA: Off

DMA needs to be on, go here for guide to turn on
http://forums.afterdawn.com/thread_view.cfm/260038

Quote:
jbradshaw
jimmy
1C82-0000-19E5-MAAX-4005 xxxx xxxx

You have your serial number in each log, edit them out before someone pirates them.

All log files checked show successful burn, but this version of Nero is doing some weird things.

[ + quote]

This message has been edited since posting. Last time this message was edited on 17. June 2006 @ 04:16

duke8888

Junior Member

17. June 2006 @ 06:10

Link to this message

Also do you have the latest firmware update for your burner, visit their website and see if one is available. I own 4 Pioneer burners and they seem the best I have had HP Lite-On and Kypemedia and they are the ones I have had problems with the most

[ + quote]

Start a new thread


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.