|
There is no NeroHistory.tx but I assume you meant NeroHistory.txt?(Just making sure)
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
MagicISO Virtual DVD-ROM I: CDRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 136MB (139316kB)
Memory in use : 73
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
NeroAPI
7:03:03 AM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
7:03:03 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
7:03:03 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
7:03:03 AM #4 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+-RW DVD8631 running
7:03:03 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:03:03 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
7:03:03 AM #7 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
7:03:04 AM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202223 (489:22.73, 4301MB)
7:03:04 AM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
7:03:04 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
7:03:04 AM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:03:04 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202224 (2202224) = #2202224/489:22.74
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202224 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
7:03:04 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4510154752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202224 | lead-out | 1 | 0x41 | 0x00
7:03:04 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:03:04 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:03:04 AM #16 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
7:03:04 AM #17 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
7:03:04 AM #18 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
7:03:04 AM #19 Phase 28 File APIProgress.cpp, Line 278
Speed measurement started
7:03:04 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:04:48 AM #21 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 2202224 (219A70h), length 0 blocks
7:04:48 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:04:48 AM #23 Phase 29 File APIProgress.cpp, Line 278
Speed measurement completed: 33.4x (46,096 KB/s)
7:04:49 AM #24 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)
7:04:49 AM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:04:49 AM #26 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
7:04:49 AM #27 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
7:04:49 AM #28 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:15:45 AM #29 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 2202224 (219A70h), length 0 blocks
7:15:45 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:15:45 AM #31 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 2202223
7:16:14 AM #32 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
MagicISO Virtual DVD-ROM I: CDRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 119MB (121892kB)
Memory in use : 76
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
NeroAPI
12:38:54 PM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
12:38:54 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
12:38:54 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
12:38:54 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+-RW DVD8631 running
12:38:54 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:38:55 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:38:55 PM #7 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
12:38:55 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1219359 (270:58.09, 2381MB)
12:38:55 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
12:38:55 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
12:38:55 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:38:55 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1219360 (1219360) = #1219360/270:58.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1219360 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
12:38:55 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2497249280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1219360 | lead-out | 1 | 0x41 | 0x00
12:38:55 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:38:55 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:38:55 PM #16 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
12:38:55 PM #17 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
12:38:55 PM #18 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
12:38:55 PM #19 Phase 28 File APIProgress.cpp, Line 278
Speed measurement started
12:38:55 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:39:54 PM #21 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 1219360 (129B20h), length 0 blocks
12:39:54 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:39:54 PM #23 Phase 29 File APIProgress.cpp, Line 278
Speed measurement completed: 33.5x (46,286 KB/s)
12:39:54 PM #24 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)
12:39:55 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:39:55 PM #26 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
12:39:55 PM #27 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
12:39:55 PM #28 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:44:22 PM #29 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 1219360 (129B20h), length 0 blocks
12:44:22 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:44:22 PM #31 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1219359
12:44:50 PM #32 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
NERO IMAGEDRIVE2 G: CDRom2
NERO IMAGEDRIVE2 H: CDRom3
MagicISO Virtual DVD-ROM I: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 267MB (274360kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
NeroAPI
3:49:09 PM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
3:49:10 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
3:49:10 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
3:49:10 PM #4 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+-RW DVD8631 running
3:49:10 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:49:10 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:49:10 PM #7 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
3:49:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2133071 (474:00.71, 4166MB)
3:49:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
3:49:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
3:49:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:49:10 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2133072 (2133072) = #2133072/474:0.72
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2133072 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
3:49:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4368531456, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2133072 | lead-out | 1 | 0x41 | 0x00
3:49:10 PM #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:49:10 PM #15 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:49:11 PM #16 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
3:49:11 PM #17 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
3:49:11 PM #18 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
3:49:11 PM #19 Phase 28 File APIProgress.cpp, Line 278
Speed measurement started
3:49:11 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:50:46 PM #21 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 2133072 (208C50h), length 0 blocks
3:50:46 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:50:46 PM #23 Phase 29 File APIProgress.cpp, Line 278
Speed measurement completed: 32.9x (45,528 KB/s)
3:50:46 PM #24 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
3:50:46 PM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:50:46 PM #26 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
3:50:46 PM #27 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
3:50:46 PM #28 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:20:29 PM #29 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 2133072 (208C50h), length 0 blocks
4:20:29 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:20:30 PM #31 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 2133071
4:21:30 PM #32 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
NERO IMAGEDRIVE2 G: CDRom2
NERO IMAGEDRIVE2 H: CDRom3
MagicISO Virtual DVD-ROM I: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 262MB (268728kB)
Memory in use : 48
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
NeroAPI
8:41:28 PM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
8:41:28 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
8:41:28 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
8:41:28 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:41:28 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
8:41:28 PM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
8:43:19 PM #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
8:43:19 PM #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631
Medium not present
8:43:19 PM #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
NERO IMAGEDRIVE2 G: CDRom2
NERO IMAGEDRIVE2 H: CDRom3
MagicISO Virtual DVD-ROM I: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 232MB (238580kB)
Memory in use : 54
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
NeroAPI
9:05:04 PM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
9:05:04 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
9:05:04 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
9:05:04 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:05:04 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:05:04 PM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
9:05:07 PM #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
9:05:07 PM #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631
Medium not present
9:05:07 PM #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 7.0.8.2
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 2 - 7.0.8.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 1 DMA: Off
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
NERO IMAGEDRIVE2 G: CDRom2
NERO IMAGEDRIVE2 H: CDRom3
MagicISO Virtual DVD-ROM I: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 399MB (409276kB)
Memory in use : 21
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
CueSheet
10:37:00 PM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory
10:37:00 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
10:37:00 PM #3 Text 0 File Writer.cpp, Line 113
Writer Image Recorder running
10:37:00 PM #4 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using CD-R/RW media
10:37:00 PM #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 445499 ( 99:01.74)
Last address to be written: 354050 ( 78:42.50)
10:37:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
10:37:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:37:00 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 300 (300) = #300/0:4.0
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 300 blocks [Image Recorder]
1: TRM_DATA_RAW_MODE2 (Cue Sheet Track)
2 indices, index0 (150) provided
original disc pos #0 + 353601 (353601) = #353601/78:34.51
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_RAW_MODE2, 2352, config 0, wanted index0 0 blocks, length 353601 blocks [Image Recorder]
--------------------------------------------------------------
10:37:05 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 0 352800 1058400, ISRC ""
2: TRM_DATA_RAW_MODE2, 2352/0x00, FilePos 1058400 1411200 833080752, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
300 | 2 | 0 | 0x41 | 0x00
450 | 2 | 1 | 0x41 | 0x00
354051 | lead-out | 1 | 0x41 | 0x00
10:37:05 PM #10 Phase 65 File dlgbrnst.cpp, Line 1730
Burn process started
10:37:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:37:05 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #450
10:43:42 PM #13 Text 0 File WriterStatus.cpp, Line 116
<Image Recorder> start writing Lead-Out at LBA 354051 (56703h), length 0 blocks
10:43:42 PM #14 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:43:43 PM #15 Phase 66 File dlgbrnst.cpp, Line 1730
Burn process completed successfully
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 5:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <NERO IMAGEDRIVE2 >Version: 2.26 - HA 1 TA 5 - 7.0.8.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : NERO IMAGEDRIVE2 2.26 imagedrv Port 2 ID 0 DMA: Off
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
NERO IMAGEDRIVE2 G: CDRom5
MagicISO Virtual DVD-ROM I: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 100MB (102592kB)
Memory in use : 80
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.6.2006
DVD-Copy on the fly
11:37:31 PM #1 SPTI -1066 File SCSIPassThrough.cpp, Line 290
I: CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 06 00 00 00 00 24
Buffer x03793200: Len x1008
11:37:40 PM #2 SPTI -1066 File SCSIPassThrough.cpp, Line 290
I: CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 06 00 00 00 00 24
Buffer x03793a00: Len x1008
11:42:11 PM #3 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
11:42:11 PM #4 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc blank or invalid. Need valid original disc.
(Medium in drive: Unknown. Medium required by compilation: DVD.)
11:42:11 PM #5 Phase 23 File dlgbrnst.cpp, Line 1730
Reading disc aborted
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 5:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.0.8.2
Using interface version: 7.0.0.0
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
NERO IMAGEDRIVE2 CDRom5
MagicISO Virtual DVD-ROM I: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 23MB (24368kB)
Memory in use : 95
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.6.2006
NeroAPI
1:40:52 AM #1 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
1:40:52 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
1:40:53 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
1:40:53 AM #4 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+-RW DVD8631 running
1:40:53 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:40:53 AM #6 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:40:53 AM #7 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
1:40:53 AM #8 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1650623 (366:48.23, 3223MB)
1:40:53 AM #9 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
1:40:53 AM #10 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
1:40:53 AM #11 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:40:53 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1650624 (1650624) = #1650624/366:48.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1650624 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
1:40:53 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3380477952, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1650624 | lead-out | 1 | 0x41 | 0x00
1:40:53 AM #14 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:40:53 AM #15 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:40:53 AM #16 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
1:40:53 AM #17 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
1:40:53 AM #18 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
1:40:53 AM #19 Phase 28 File APIProgress.cpp, Line 278
Speed measurement started
1:40:54 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:42:28 AM #21 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 1650624 (192FC0h), length 0 blocks
1:42:28 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:42:28 AM #23 Phase 29 File APIProgress.cpp, Line 278
Speed measurement completed: 29x (40,022 KB/s)
1:42:28 AM #24 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 8x (11,080 KB/s)
1:42:28 AM #25 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:42:28 AM #26 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
1:42:28 AM #27 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
1:42:28 AM #28 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:59:47 AM #29 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 1650624 (192FC0h), length 0 blocks
1:59:49 AM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:59:49 AM #31 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1650623
2:00:18 AM #32 Phase 37 File APIProgress.cpp, Line 278
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MagicISO Virtual DVD-ROM >Version: 1.0A - HA 1 TA 4 - 7.0.8.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
MagicISO Virtual DVD-ROM I: CDRom4
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 253MB (259400kB)
Memory in use : 50
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.6.2006
UDF/ISO compilation
5:04:00 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
5:04:00 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
5:04:00 PM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:04:01 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
5:04:01 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
5:04:01 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
5:04:01 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+-RW DVD8631 running
5:04:01 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:04:01 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:04:01 PM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
5:04:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1875823 (416:50.73, 3663MB)
5:04:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
5:04:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
5:04:01 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:04:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1875824 (1875824) = #1875824/416:50.74
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1875824 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
5:04:01 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3841687552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1875824 | lead-out | 1 | 0x41 | 0x00
5:04:01 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:04:01 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:04:01 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
5:04:01 PM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
5:04:01 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
5:04:01 PM #22 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
5:04:01 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:05:43 PM #24 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 1875824 (1C9F70h), length 0 blocks
5:05:43 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:05:43 PM #26 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 27x (37,392 KB/s)
5:05:44 PM #27 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
5:05:44 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:05:44 PM #29 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
5:05:44 PM #30 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
5:05:44 PM #31 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:25:46 PM #32 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 1875824 (1C9F70h), length 0 blocks
5:25:46 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:25:47 PM #34 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 1875823
5:26:48 PM #35 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 2.4x (3,324 KB/s)
5:26:48 PM #36 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started
5:35:42 PM #37 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:35:42 PM #38 Phase 80 File dlgbrnst.cpp, Line 1730
Data verification completed successfully
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 5:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MagicISO Virtual DVD-ROM >Version: 1.0A - HA 1 TA 2 - 7.0.8.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
MagicISO Virtual DVD-ROM I: CDRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 114MB (116888kB)
Memory in use : 77
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.6.2006
UDF/ISO compilation
4:49:40 AM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
4:49:40 AM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
4:49:40 AM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:49:40 AM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
4:49:40 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
4:49:40 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
4:49:40 AM #7 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+-RW DVD8631 running
4:49:40 AM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:49:40 AM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:49:40 AM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
4:49:41 AM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3605007 (801:06.57, 7041MB)
4:49:41 AM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
4:49:41 AM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: CMC MAG, Media Type ID: D01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 0
4:49:41 AM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:49:41 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3605008 (3605008) = #3605008/801:6.58
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3605008 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
4:49:41 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7383056384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3605008 | lead-out | 1 | 0x41 | 0x00
4:49:41 AM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:49:41 AM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:49:41 AM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
4:49:41 AM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
4:49:41 AM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
4:49:41 AM #22 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
4:49:41 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:54:26 AM #24 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 3605008 (370210h), length 0 blocks
4:54:26 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:54:26 AM #26 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 18.4x (25,428 KB/s)
4:54:26 AM #27 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
4:54:26 AM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:54:26 AM #29 Text 0 File DVDPlusDualLayer.cpp, Line 636
L0 Data Zone Capacity set to 1822560 (1BCF60h, 3559MB) -> OK, confirmed setting
4:54:26 AM #30 CDR -1205 File DVDPlusDualLayer.cpp, Line 663
Burning Layer 1
4:54:26 AM #31 Text 0 File DVDPlusDualLayer.cpp, Line 673
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
4:54:26 AM #32 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 1ECF60 h (LBN: 1BCF60 h, 3559 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: D01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 43 4D 43 20 4D - 41 47 00 44 30 31 00 40 ...CMC.MAG.D01.@
25 25 37 0B 02 3C 6A 02 - 3C 6A 1B 1C 0D 0C 0C 0C %7..<j.<j......
02 01 01 10 00 1B 1C 0D - 0C 0C 0C 02 01 01 10 00 ................
4:54:26 AM #33 Text 0 File DVDR.cpp, Line 6514
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
4:54:26 AM #34 CDR -1207 File DVDR.cpp, Line 5649
Book Type automatically set to: DVD-ROM
4:54:26 AM #35 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
5:13:51 AM #36 CDR -1206 File DVDPlusDualLayer.cpp, Line 1948
Burning Layer 2
5:13:51 AM #37 Text 0 File DVDPlusDualLayer.cpp, Line 1959
Perform layer 1 to 2 jump before writing at address 1822560 (1BCF60h)
5:33:49 AM #38 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 3605008 (370210h), length 0 blocks
5:33:49 AM #39 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:36:05 AM #40 Text 0 File DVDR.cpp, Line 6514
Drive: PHILIPS DVD+-RW DVD8631
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
5:36:06 AM #41 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 2.4x (3,324 KB/s)
5:36:06 AM #42 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started
5:55:16 AM #43 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:55:16 AM #44 Phase 80 File dlgbrnst.cpp, Line 1730
Data verification completed successfully
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 5:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
5C82001080100000000813510881
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <PHILIPS DVD+-RW DVD8631> Version: GD30 - HA 1 TA 1 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MagicISO Virtual DVD-ROM >Version: 1.0A - HA 1 TA 2 - 7.0.8.2
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75JHC0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST380021A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : SONY CD-RW CRX220E1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : PHILIPS DVD+-RW DVD8631 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX220E1 D: CDRom0
PHILIPS DVD+-RW DVD8631 E: CDRom1
MagicISO Virtual DVD-ROM I: CDRom2
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522220kB)
Free physical memory: 120MB (123032kB)
Memory in use : 76
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.6.2006
UDF/ISO compilation
5:15:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
5:15:20 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
5:15:20 PM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:15:20 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
5:15:20 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
5:15:20 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
5:15:20 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: PHILIPS DVD+-RW DVD8631 running
5:15:20 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:15:20 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:15:20 PM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
5:15:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2215695 (492:22.45, 4327MB)
5:15:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
5:15:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVD+-RW DVD8631, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
5:15:20 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:15:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2215696 (2215696) = #2215696/492:22.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2215696 blocks [E: PHILIPS DVD+-RW DVD8631]
--------------------------------------------------------------
5:15:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: PHILIPS DVD+-RW DVD8631] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4537745408, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2215696 | lead-out | 1 | 0x41 | 0x00
5:15:20 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:15:20 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:15:20 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
5:15:20 PM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
5:15:20 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
5:15:20 PM #22 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
5:15:20 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:18:16 PM #24 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 2215696 (21CF10h), length 0 blocks
5:18:16 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:18:16 PM #26 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 18.5x (25,544 KB/s)
5:18:16 PM #27 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
5:18:16 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:18:16 PM #29 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
5:18:16 PM #30 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
5:18:16 PM #31 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:32:43 PM #32 Text 0 File WriterStatus.cpp, Line 116
<E: PHILIPS DVD+-RW DVD8631> start writing Lead-Out at LBA 2215696 (21CF10h), length 0 blocks
5:32:43 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:32:44 PM #34 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 2215695
5:33:24 PM #35 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)
5:33:24 PM #36 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started
5:37:56 PM #37 Phase 40 File dlgbrnst.cpp, Line 1417
Aborted by user
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 3:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/10/2004 5:00:00 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
This message has been edited since posting. Last time this message was edited on 19. June 2006 @ 17:46
|
