|
|
|
DVD Write Error....
|
|
|
ICEnFIRE
Newbie
|
16. June 2006 @ 13:30 |
Link to this message
|
|
I am new to this forum, as I've never had issues burning cds or dvds before. I ma in the process of burning some data cds on dvd because of the storage capacity. I recently this past April reloaded my machine, and since I have tried burning dvd's, I've had issues. I'm using Nero Premium 7.0. Here is a snippet of the log file i saved, to see if anyone can assist me. I'm not having any issues with burning cd-r's, just dvd-r's. If you want to see or need to see more of the log file than this, please let me know. Thank you..:
4:12:40 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x02370000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:12:40 PM #25 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
16. June 2006 @ 13:59 |
Link to this message
|
|
Please post the FULL log file thanks
|
Moderator
|
16. June 2006 @ 14:00 |
Link to this message
|
|
Hi ICEnFIRE
Yes post the rest of the log file - whole thing is best.
This snippet may be pointing to media but the rest of the log will tell us more.
|
|
ICEnFIRE
Newbie
|
16. June 2006 @ 20:55 |
Link to this message
|
K. Sorry about that. I wasn't sure if I needed the whole log file or not for the proper help. Here is the total log file copied and pasted. Thank you:
5C80001080000000005666878691
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: Ahead\Nero Fast CD-Burning Plug-in
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 586MB (600548kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.6.2006
NeroAPI
4:12:06 PM #1 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 81920KB of Memory
4:12:06 PM #2 Text 0 File Reader.cpp, Line 124
Reader running
4:12:06 PM #3 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVD+RW GCA-4040N running
4:12:06 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
4:12:06 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
4:12:06 PM #6 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
4:12:06 PM #7 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1969647 (437:41.72, 3846MB)
4:12:06 PM #8 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO
4:12:06 PM #9 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
4:12:06 PM #10 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:12:06 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1969648 (1969648) = #1969648/437:41.73
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969648 blocks [D: HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
4:12:06 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033839104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1969648 | lead-out | 1 | 0x41 | 0x00
4:12:14 PM #13 Text 0 File SCSIPassThrough.cpp, Line 56
Error on LockVolume: Access is denied.
4:12:14 PM #14 Text 0 File SCSIPassThrough.cpp, Line 104
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:12:14 PM #15 Text 0 File Cdrdrv.cpp, Line 9571
SPTIDismountVolume not successfull
4:12:22 PM #16 Text 0 File SCSIPassThrough.cpp, Line 56
Error on LockVolume: Access is denied.
4:12:22 PM #17 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
4:12:22 PM #18 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
4:12:22 PM #19 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
4:12:22 PM #20 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
4:12:22 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:12:22 PM #22 Text 0 File Cdrdrv.cpp, Line 8385
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: AML.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
4:12:22 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
4:12:40 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x02370000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:12:40 PM #25 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
4:12:40 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:12:40 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:12:40 PM #28 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 12:12:26 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
16. June 2006 @ 21:18 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 16. June 2006 @ 21:18
|
Moderator
|
16. June 2006 @ 21:31 |
Link to this message
|
It also looks like you still have Nero 6 installed - Using interface version: 6.6.0.12
Uninstall 6 & 7 and run the clean tool - then reinstall Nero 7 from Gwen's link.
Here's the clean tool for 6 but 7's may suffice for both versions
http://ww2.nero.com/nero6/enu/General_CleanTool.html
You have an older drive that hasn't has any updates for awhile. So when you buy better media look for media with burn speeds rated no higher than 8x. 4x would be better if you can find it.
Keep us posted!
edit: fix link
This message has been edited since posting. Last time this message was edited on 16. June 2006 @ 21:32
|
|
ICEnFIRE
Newbie
|
16. June 2006 @ 23:09 |
Link to this message
|
Quote:
It also looks like you still have Nero 6 installed - Using interface version: 6.6.0.12
That is strange because I do not even own a copy of Nero 6 nor have i ever installed it on this machine. I'll have a look into that though......
|
AfterDawn Addict
|
16. June 2006 @ 23:47 |
Link to this message
|
Quote:
NT-SPTI used
Nero API version: 7.0.0.0
Using interface version: 6.6.0.12
As binkie7 said, it does appear to have been installed, just run Nero6 clean tool, then uninstall Nero7 and run Nero7 clean tool and then re install Nero 7.0.8.2 from the link supplied.
|
|
ICEnFIRE
Newbie
|
19. June 2006 @ 08:00 |
Link to this message
|
Ok guys, sorry for a delayed response.... busy weekend. I used the cleantool, uninstalled Nero 7 and reinstalled Nero version 7.2 because the version 7.0.8.2 wasn't installing properly. Anyways, tried burning a data dvd from my drive but it still seems to have the same issue. As for the DVD-RW I am using, I've never had a problem with them in the past. They are a brand by CompUSA put out that are easily affordable and reliable. The only assumption I could make is that I need to update my dvd drivers or something because this problem only occurred after I reloaded my operating system this past Spring. i appreciate all your help guys. Here's the log from my most recent burn this morning:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 564MB (577836kB)
Memory in use : 44 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.6.2006
ISO compilation
10:44:44 AM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:44:44 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
10:44:44 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
10:44:44 AM #4 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVD+RW GCA-4040N running
10:44:44 AM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:44:44 AM #6 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media
10:44:44 AM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1969295 (437:37.20, 3846MB)
10:44:44 AM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
10:44:44 AM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
10:44:44 AM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:44:44 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1969296 (1969296) = #1969296/437:37.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969296 blocks [D: HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
10:44:44 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033118208, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1969296 | lead-out | 1 | 0x41 | 0x00
10:44:44 AM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:44:44 AM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:44:44 AM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
10:44:44 AM #16 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.
10:44:44 AM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
10:44:44 AM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
10:44:44 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:44:44 AM #20 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: AML.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
10:44:44 AM #21 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 00 2B 52 54 42 00 00 04 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 14
Buffer x034eb800: Len x4
0x00 00 00 00
10:44:44 AM #22 Text 0 File DVDR.cpp, Line 5746
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -1
10:44:44 AM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
10:44:58 AM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x052f0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
10:44:58 AM #25 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
10:44:58 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:44:59 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:44:59 AM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 12/5/2005 12:12:26 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
19. June 2006 @ 09:01 |
Link to this message
|
From this new log the only things that have changed is your are no longer getting this error Error on LockVolume: Access is denied
but your are getting this new error in the last log Changing the Book Type was finished with error, return code -1
Turn off this option. It doesn't look like your drive has this capability.
Now for the media - the problem with brands like CompUSA, HP, Memorex etc. is they use different manufacturers and more than likely not quality ones. can be hit or miss
Here's some reviews on CompUSA made by AML - not good:
http://www.videohelp.com/dvdmedia.php?selectmedia=2216#comments
Better to use are Verbatim or made in Japan Sony or Fuji. These go on sale too and for a good price.
I can't find any firmware update for your drive - I'm guessing this is a laptop? You may need to check with the manufacturer to see if there is one but from your log your drive fully recognizes these discs.
Turn off the booktyping and let's see how that goes.
|
AfterDawn Addict
|
19. June 2006 @ 14:24 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 19. June 2006 @ 14:25
|
|
monskie
Newbie
|
20. June 2006 @ 21:48 |
Link to this message
|
1C80-3030-8068-0000-6477-0790-0919
Windows XP 5.2
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.1.2
Internal Version: 7, 0, 1, 2
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0C - HA 2 TA 2 - 7.0.1.2
Adapter driver: <USB> HA 2
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <TSSTcorp CD-ROM SH-C522C>Version: TS01 - HA 1 TA 0 - 7.0.1.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : TSSTcorp CD-ROM SH-C522C atapi Port 0 ID 1 DMA: Off
DiskPeripheral : SEAGATE ST373207LW 0003 adpu320 Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
TSSTcorp CD-ROM SH-C522C D: CDRom0
LITE-ON DVDRW SOHW-1673S E: CDRom10
SCSIVAX DVD/CD-ROM F: CDRom8
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047748kB)
Free physical memory: 103MB (105524kB)
Memory in use : 89 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.6.2006
UDF/ISO compilation
1:39:01 PM #1 Phase 112 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation started
1:39:01 PM #2 Phase 114 File dlgbrnst.cpp, Line 1725
DVD-Video files reallocation completed (no file modified)
1:39:01 PM #3 Text 0 File Isodoc.cpp, Line 6411
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:39:01 PM #4 Phase 111 File dlgbrnst.cpp, Line 1725
DVD-Video files sorted
1:39:02 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
1:39:02 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:39:02 PM #7 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW SOHW-1673S running
1:39:02 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:39:02 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:39:02 PM #10 Text 0 File Burncd.cpp, Line 3302
Turn on Disc-At-Once, using DVD media
1:39:02 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1540895 (342:25.20, 3009MB)
1:39:02 PM #12 Text 0 File DlgWaitCD.cpp, Line 291
Write in overburning mode: NO (enabled: CD)
1:39:02 PM #13 Text 0 File DlgWaitCD.cpp, Line 2578
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD-R
Disc Manufacturer: SONY08 - D1
Disc Application Code: 64, Disc Physical Code: 193
1:39:02 PM #14 Text 0 File DlgWaitCD.cpp, Line 458
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:39:02 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1540896 (1540896) = #1540896/342:25.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1540896 blocks [E: LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------
1:39:02 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3155755008, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1540896 | lead-out | 1 | 0x41 | 0x00
1:39:02 PM #17 Text 0 File SCSIPassThrough.cpp, Line 36
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:39:02 PM #18 Phase 24 File dlgbrnst.cpp, Line 1725
Caching of files started
1:39:02 PM #19 Text 0 File Burncd.cpp, Line 4132
Cache writing successful.
1:39:02 PM #20 Phase 25 File dlgbrnst.cpp, Line 1725
Caching of files completed
1:39:02 PM #21 Phase 36 File dlgbrnst.cpp, Line 1725
Burn process started at 8x (11,080 KB/s)
1:39:02 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:39:02 PM #23 Text 0 File DVDR.cpp, Line 2580
Recording mode: Sequential Recording Mode
1:39:02 PM #24 Text 0 File MMC.cpp, Line 21611
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
1:39:02 PM #25 Text 0 File DVDR.cpp, Line 2735
Start write address at LBA 0
DVD high compatibility mode: Yes
1:39:02 PM #26 Text 0 File Cdrdrv.cpp, Line 8411
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: 10.08 Mbps (2 h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:40:05 PM #27 Text 0 File Cdrdrv.cpp, Line 1197
13:40:05.484 - E: LITE-ON DVDRW SOHW-1673S : Queue again later
1:41:18 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 323
E: CdRom10: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 25 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x064c0000: Len x10000
0x00 00 01 BA 44 06 6F B1 1D B9 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 00 78 3D FF FD FC C0 38 00 39
0x80 DB 0B 94 07 40 3A 16 44 94 BB B0 64 FF F0 17
1:41:18 PM #29 CDR -1135 File Writer.cpp, Line 302
Write error
E: LITE-ON DVDRW SOHW-1673S
1:41:18 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:41:18 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:41:18 PM #32 Text 0 File DVDR.cpp, Line 2978
EndDAO: Last written address was 9471
1:41:18 PM #33 Phase 38 File dlgbrnst.cpp, Line 1725
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\usb8023.sys': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=14336 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbcamd.sys': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=25728 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbcamd2.sys': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=25728 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbd.sys': Ver=5.2.3790.0 (srv03_rtm.030324-2048), size=5504 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbehci.sys': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=27136 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbhub.sys': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=59392 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbintel.sys': Ver=5.2.3790.0 (srv03_rtm.030324-2048), size=15744 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbport.sys': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=145408 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
File 'Drivers\usbscan.sys': Ver=5.2.3790.0 (srv03_rtm.030324-2048), size=15872 bytes, created 3/25/2003 3:09:24 PM (Adapter driver for rec)
File 'Drivers\USBSTOR.SYS': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=28160 bytes, created 3/25/2005 10:26:14 AM (Adapter driver for rec)
File 'Drivers\usbuhci.sys': Ver=5.2.3790.1830 (srv03_sp1_rtm.050324-1447), size=20864 bytes, created 3/25/2005 8:00:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
i need help... i cant burn like i usually do..please...
|
AfterDawn Addict
|
20. June 2006 @ 22:52 |
Link to this message
|
First off, it's not really a good idea just to hijack another thread.
Quote:
1C80-3030-8068-0000-6477 xxxx xxxx
Edit out your serial number
your Nero is a few versions behind, update to this version (NOT 7.2.0.3/b) http://www.filehippo.com/download_nero_7_premium/?845
Quote:
CdRomPeripheral : TSSTcorp CD-ROM SH-C522C atapi Port 0 ID 1 DMA: Off
DiskPeripheral : SEAGATE ST373207LW 0003 adpu320 Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
DMA needs to be on, heres a guide to turn on, http://forums.afterdawn.com/thread_view.cfm/260038
Quote:
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0C - HA 2 TA 2 - 7.0.1.2
I dont see your DMA for the burner,firmware update available here http://www.liteonit.com/DOWNLOADS/ODD/SOHW-1673S/firmware/DR16JS0D.zip
Quote:
Physical memory : 1023MB (1047748kB)
Free physical memory: 103MB (105524kB)
Memory in use : 89 %
Try and free up some memory, dont multitask while burning.
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
Burner doesnt recognize discs, hopefully firmware update will solve that
Quote:
Burn process failed at 8x (11,080 KB/s)
Slow to 4X
As for all the drivers at the end of the log, I havent seen any of them before
This message has been edited since posting. Last time this message was edited on 20. June 2006 @ 22:52
|
|
monskie
Newbie
|
21. June 2006 @ 21:16 |
Link to this message
|
i am still having problems.. ive installed 7.2 Nero...now am trying to install 7.0.8 ill let you know abt my status then... thank you...
|
|
monskie
Newbie
|
21. June 2006 @ 21:19 |
Link to this message
|
i am still having problems.. ive installed 7.2 Nero...now am trying to install 7.0.8 ill let you know abt my status then... thank you...
|
AfterDawn Addict
|
21. June 2006 @ 21:40 |
Link to this message
|
|
I cannot understand why you installed 7.2.0.3 after I suggested not to as it was "buggy"
|
|
monskie
Newbie
|
21. June 2006 @ 21:42 |
Link to this message
|
|
yeah my fault...ive mistakenly downloaded the wrong one...
|
AfterDawn Addict
|
21. June 2006 @ 21:44 |
Link to this message
|
|
Clicking on that link I provided takes you directly to the suggested version, please answer any further questions in your other thread that you have started.
|
|
ICEnFIRE
Newbie
|
22. June 2006 @ 12:19 |
Link to this message
|
Quote:
Changing the Book Type was finished with error, return code -1
Turn off this option. It doesn't look like your drive has this capability.
I changed the Book Type setting to "current recorder setting" beacuse it did not appear I could just plain turn it off with the Nero burning rom.
Quote:
Now for the media - the problem with brands like CompUSA, HP, Memorex etc. is they use different manufacturers and more than likely not quality ones. can be hit or miss
I understand what you mean about buying a good name brand cd. Usually I will, but when I bought these earlier this spring, they were for a real good price and I have burn roughly 30 out of the 50 dvd-r's without a problem. since reloading my system have these issues come about.
Quote:
I can't find any firmware update for your drive - I'm guessing this is a laptop? You may need to check with the manufacturer to see if there is one but from your log your drive fully recognizes these discs.
Yes it is a laptop. hp pvaillion zd7260us. I checked hp's website for driver updates, but nothing for the cd/dvd drive.
I tried a new burn changing what you thought might help as I stated above and seeming to have issues with burning at the same point in the process. Here's the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 584MB (598220kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.6.2006
ISO compilation
2:22:35 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:22:35 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
2:22:35 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
2:22:35 PM #4 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVD+RW GCA-4040N running
2:22:35 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
2:22:35 PM #6 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media
2:22:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1969279 (437:37.04, 3846MB)
2:22:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
2:22:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
2:22:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:22:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1969280 (1969280) = #1969280/437:37.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969280 blocks [D: HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
2:22:36 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033085440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1969280 | lead-out | 1 | 0x41 | 0x00
2:22:36 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
2:22:36 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
2:22:36 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
2:22:36 PM #16 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.
2:22:36 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
2:22:36 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
2:22:36 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:22:36 PM #20 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: AML.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
2:22:36 PM #21 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 00 2B 52 54 42 00 00 04 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 14
Buffer x034f0600: Len x4
0x00 00 00 00
2:22:36 PM #22 Text 0 File DVDR.cpp, Line 5746
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -1
2:22:36 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
2:23:21 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x052d0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
2:23:21 PM #25 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
2:23:21 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:23:21 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:23:21 PM #28 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
2:23:21 PM #29 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully
2:23:21 PM #30 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thank you for the patience and the help.....
|
AfterDawn Addict
|
22. June 2006 @ 13:38 |
Link to this message
|
I advised you earlier in the thread about using 7.2.0.3 and your poor choice of media however you chose to ignore my recommendations.
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
You now have Roxio installed, it clashes with Nero I can recommend running this zapper,http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
but I doubt you'll do that either.
We here at AD spend our time reading these logs but we cannot make members follow our suggestions, you have been given suggestions by others and have also ignored them as well, it appears you don't want to solve your problem.
|
|
Saltgrass
Senior Member
|
22. June 2006 @ 13:57 |
Link to this message
|
Just for the heck of it, look at this:
http://www.videohelp.com/dvdwriters.php?DVDnameid=94&Search=Searc...
I see the newest Bios version is F.35, is that what you show on your machine?
I don't know what speed your media is rated, but sometimes a slower rated media will work better at slower speeds. It took me a while to find 2.4x media once for my older HP drive. The Verbatim media I have now shows 1x-2.4x.
And, as mentioned, get rid of the Roxio stuff.
Nero 7 v7.10.1.0
P4 2.4GHz 1 Gig RAM
NEC ND3550A DVD Burner
|
Moderator
|
22. June 2006 @ 15:28 |
Link to this message
|
@ICEnFIRE
You still have the booktyping error. Try changing your booktype here: in Nero Tool Kit> CD-DVD Speed>extra>bitsetting. Change it to +R.
You may need to have a blank disc inserted to change it.
|
|
ICEnFIRE
Newbie
|
22. June 2006 @ 18:45 |
Link to this message
|
Quote:
You now have Roxio installed, it clashes with Nero I can recommend running this zapper,http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Did it. Used that tool....
Quote:
I see the newest Bios version is F.35, is that what you show on your machine?
Yeah, I was using F.30. I flashed the bios with the new F.35 update......
Quote:
@ICEnFIRE
You still have the booktyping error. Try changing your booktype here: in Nero Tool Kit> CD-DVD Speed>extra>bitsetting. Change it to +R.
You may need to have a blank disc inserted to change it.
Changed the booktype setting for the DVD-R option to DVD-R......
Quote:
I advised you earlier in the thread about using 7.2.0.3 and your poor choice of media however you chose to ignore my recommendations.
Early on, you informed me to use the 7.0.8.3 version, included with a link. The install was unsuccessful as it told me my serial # was expired or something along those lines.
The earlier thread appeared to be in regards to the person who began hijacking the thread. Burning data-dvds is the only bug I have seen with my use of Nero 7, irregardless of what version of 7 it is.
So taking all that advice from previously, I tried another burn and from what I could tell in the log file, seems I'm still getting the same kind of error:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.2.0.3
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 584MB (598332kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.6.2006
ISO compilation
9:21:30 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:21:30 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
9:21:30 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
9:21:30 PM #4 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVD+RW GCA-4040N running
9:21:30 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:21:31 PM #6 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media
9:21:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1969279 (437:37.04, 3846MB)
9:21:31 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
9:21:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
9:21:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:21:31 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1969280 (1969280) = #1969280/437:37.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969280 blocks [D: HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
9:21:31 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033085440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1969280 | lead-out | 1 | 0x41 | 0x00
9:21:31 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:21:31 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:21:31 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
9:21:31 PM #16 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.
9:21:31 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
9:21:31 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
9:21:32 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:21:32 PM #20 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: AML.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
9:21:32 PM #21 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 00 2B 52 54 42 00 00 04 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 14
Buffer x04fc4600: Len x4
0x00 00 00 00
9:21:32 PM #22 Text 0 File DVDR.cpp, Line 5746
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -1
9:21:32 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
9:21:51 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x052d0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9:21:51 PM #25 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
9:21:51 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:21:52 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:21:52 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
22. June 2006 @ 19:17 |
Link to this message
|
@ICEnFIRE
Use the serial # from your version of 7 for the download in the link Gwen provided. The one listed in this version on that site has expired.
The booktype error is again recieved 1 sec after the burn started. So Nero is still trying to booktype.
Most of your burns fail in less than 1 minute.
Are data dvd's the only problem you have burning? Can you do video dvd's? Have you had any successful burns since you reformatted?
I realize you've had success w/ this media before but it still may be a problem. You can have inconsistency in the same spindle.
You can try taking the burn speed down to 2 or even 1 and see if that makes a difference.
|
|
Advertisement
|
|
|
|
ICEnFIRE
Newbie
|
27. June 2006 @ 11:35 |
Link to this message
|
Sorry for another delay. Been overly busy....
So I tried burning a data dvd with version 7.0.8.2 and still got an error. I can burn video dvds ok with no problem, just some issue trying to burn with data to a dvd. I always set Nero to burn data dvds at 2.4x (the lowest rating it'll allow me to set it at) Here's the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD+RW GCA-4040N>Version: 1.17 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2080AT PL atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+RW GCA-4040N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD+RW GCA-4040N D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 588MB (602300kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.6.2006
ISO compilation
9:15:35 PM #1 Text 0 File Isodoc.cpp, Line 6423
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:15:35 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
9:15:35 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
9:15:35 PM #4 Text 0 File Writer.cpp, Line 113
Writer D: HL-DT-ST DVD+RW GCA-4040N running
9:15:35 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:15:36 PM #6 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
9:15:36 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1969279 (437:37.04, 3846MB)
9:15:36 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
9:15:36 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVD+RW GCA-4040N, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 001, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
9:15:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:15:36 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1969280 (1969280) = #1969280/437:37.5
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1969280 blocks [D: HL-DT-ST DVD+RW GCA-4040N]
--------------------------------------------------------------
9:15:36 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: HL-DT-ST DVD+RW GCA-4040N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4033085440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1969280 | lead-out | 1 | 0x41 | 0x00
9:15:36 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:15:36 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:15:36 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
9:15:37 PM #16 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
9:15:37 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
9:15:37 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 2.4x (3,324 KB/s)
9:15:37 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:15:37 PM #20 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: AML.....
Media type ID: 001
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 01 41 4D 4C 00 00 - 00 00 00 30 30 31 00 38 ...AML.....001.8
23 54 37 13 02 4A 71 02 - 90 66 16 16 0B 0B 0A 0A #T7..Jq..f......
01 1C 1E 0B 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
9:15:37 PM #21 SPTI -1 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x14
Sense Qual: 0x00
CDB Data: 0xFC 00 2B 52 54 42 00 00 04 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 14
Buffer x034bb800: Len x4
0x00 00 00 00
9:15:37 PM #22 Text 0 File DVDR.cpp, Line 5719
Drive: HL-DT-ST DVD+RW GCA-4040N
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished with error, return code -1
9:15:37 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
9:15:53 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 290
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x80
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0E 00 00 00 00 0C 80
Buffer x052c0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9:15:53 PM #25 CDR -1135 File Writer.cpp, Line 302
Write error
D: HL-DT-ST DVD+RW GCA-4040N
9:15:53 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:15:54 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:15:54 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/16/2006 3:23:54 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
