|
|
|
Help with nero problem
|
|
|
redroostr
Newbie
|
20. June 2006 @ 10:44 |
Link to this message
|
OK I'll try and get everything clear and straight in one post. Here is my problem, which may not be one after all. Strange I know. I just installed a sony dru-820a dvd dual-layer burner and use Nero v 7.2.0.3.
I proceeded to burn 3 AVI files as data onto a memorex 16x DVD+R blank disc. The first thing i noticed that i have never seen before was the message 'book type automatically set to dvd-rom'at the start of the burn. Then at the end of the burn i saw a few messages i have never seen before.
The first said 'reset occurred' and then 'could not perform end of disc at once' followed by 'burn process failed'. Here's the kicker: after ejecting the disc i decided to throw it into my stand alone player for the hell of it, and all the files were accounted for and played back. I double checked and the beginning and end of each file played back fine. So my quesetion is, why did Nero tell me the burn failed when it actually didnt? Any help would be greatly appreciated. Here is my log file from the burn:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 6/26/2004 6:48:33 PM
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.0.3
Internal Version: 7, 2, 0, 3
(Nero Express)
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 4 - 7.2.0.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 1 - 7.2.0.3
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-820A D: CDRom4
AXV CD/DVD-ROM F: CDRom1
SCSIVAX DVD/CD-ROM G: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1047536kB)
Free physical memory: 406MB (415860kB)
Memory in use : 60 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.6.2006
ISO compilation
1:55:03 PM #1 Text 0 File Isodoc.cpp, Line 6424
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:55:04 PM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
1:55:04 PM #3 Text 0 File Reader.cpp, Line 124
Reader running
1:55:04 PM #4 Text 0 File Writer.cpp, Line 113
Writer D: SONY DVD RW DRU-820A running
1:55:04 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:55:04 PM #6 Text 0 File Burncd.cpp, Line 3365
Turn on Disc-At-Once, using DVD media
1:55:04 PM #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2121087 (471:21.12, 4142MB)
1:55:04 PM #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
1:55:04 PM #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: SONY DVD RW DRU-820A, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
1:55:04 PM #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:55:04 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2121088 (2121088) = #2121088/471:21.13
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2121088 blocks [D: SONY DVD RW DRU-820A]
--------------------------------------------------------------
1:55:04 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: SONY DVD RW DRU-820A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4343988224, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2121088 | lead-out | 1 | 0x41 | 0x00
1:55:04 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:55:04 PM #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:55:04 PM #15 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
1:55:04 PM #16 Text 0 File Burncd.cpp, Line 4199
Cache writing successful.
1:55:04 PM #17 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
1:55:04 PM #18 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
1:55:04 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:55:04 PM #20 Text 0 File Cdrdrv.cpp, Line 8914
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
1:55:05 PM #21 Text 0 File DVDR.cpp, Line 6541
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
1:55:05 PM #22 CDR -1207 File DVDR.cpp, Line 5676
Book Type automatically set to: DVD-ROM
1:55:05 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: No
2:02:39 PM #24 Text 0 File WriterStatus.cpp, Line 116
<D: SONY DVD RW DRU-820A> start writing Lead-Out at LBA 2121088 (205D80h), length 0 blocks
2:02:39 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:02:44 PM #26 SPTI -1114 File SCSIPassThrough.cpp, Line 290
D: CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
2:02:44 PM #27 SPTI -1169 File SCSIPassThrough.cpp, Line 290
D: CdRom4: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x07
CDB Data: 0x5B 01 02 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 04 07 00 80
2:02:49 PM #28 Text 0 File DVDR.cpp, Line 6541
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:02:49 PM #29 CDR -1114 File ThreadedTransferInterface.cpp, Line 1937
Reset occurred
D: SONY DVD RW DRU-820A
2:02:49 PM #30 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
2:03:07 PM #31 Text 0 File DVDR.cpp, Line 6541
Drive: SONY DVD RW DRU-820A
Book Type request [gen]: DVD+R, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:03:07 PM #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 3:07:32 PM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 6/26/2004 6:48:33 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 9:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 4/6/2005 6:09:41 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\scsiport.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=96256 bytes, created 8/4/2004 1:59:41 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
rulisky
Senior Member
|
21. June 2006 @ 16:01 |
Link to this message
|
I have a DRU-820a and it has been very kind to me. Sorry but I don't read or understand those logs very well; maybe some one else can help with those.
Things I did notice are:
You used memorex disks, most here do not favor them.
My unit came with 6.6.0.18 Nero, been reading here that later versions are buggy. You might want to uninstall Nero, download 6.6.0.18, and use your SN when you install the 'older' version.
You did not mention burn speed, but you should burn at half the rated speed, ie. 8X for your 16X disks.
Do you have DMA enabled?
Book type set to DVD-ROM for +R media IS a good idea.
|
Moderator
1 product review
|
25. June 2006 @ 06:49 |
Link to this message
|
Rulisky is giving some good advice, but let me elaborate a little.
Quote:
Recorder: <SONY DVD RW DRU-820A> Version: 1.0b - HA 1 TA 4 - 7.2.0.3
The Nero version you are using could be buggy, try 7.0.8.2b here:
http://my.afterdawn.com/locoeng/blog_entry.cfm/280
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : IC35L090AVV207-0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DRU-820A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 3 ID 0 DMA: Off
DMA is off for the bottom two drives which could drag down your HDD and burner...fix this via this guide by alkohol:
http://forums.afterdawn.com/thread_view.cfm/260038
Quote:
Multisession : TRUE
Multisession type: : Start multisession
You don't want to use multisession, select no multisession.
Quote:
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
As Rulisky stated, CMC Mags are trash pile qualified discs. Try some quality Verbatims (MIJ or MIT) or Sony, Fuji, Maxell, Taiyo Yuden (MIJ). As a general rule of thumb stay away from media made in Taiwan, with the exception of Verbatim.
But to answer some of your questions
Quote:
The first thing i noticed that i have never seen before was the message 'book type automatically set to dvd-rom'at the start of the burn. Then at the end of the burn i saw a few messages i have never seen before.
This is a good thing, Nero will automatically booktype your DVD+R discs for you to DVD-ROM. Booktyping is a way of writing to a disc that tricks your stand alone player into thinking it is reading a commercial DVD (store bought movie), thus increasing compatability across different machines.
Quote:
The first said 'reset occurred' and then 'could not perform end of disc at once' followed by 'burn process failed'. Here's the kicker: after ejecting the disc i decided to throw it into my stand alone player for the hell of it, and all the files were accounted for and played back. I double checked and the beginning and end of each file played back fine. So my quesetion is, why did Nero tell me the burn failed when it actually didnt?
We are talking about computers here...they just do strange things sometimes. The errors may or may not effect the burn or the quality of the burn. You may at times see a message at the end of your log that states the burn was completed successfully, but the resulting disc will be unplayable in any drives or devices that you try. Nero is a big complicated suite of programs that needs an extremely stable environment to work in and produce consistent results.
|
|
redroostr
Newbie
|
27. June 2006 @ 07:41 |
Link to this message
|
|
Thanks for the help guys, everything's goin good again.
|
|
Advertisement
|
|
|
Moderator
1 product review
|
27. June 2006 @ 15:58 |
Link to this message
|
|
Glad you got it working, happy burning.
|
|
