|
|
|
Illegal Disc/Unsupported Media/This Is Starting To Suck
|
|
|
mog108
Newbie
|
2. July 2006 @ 19:38 |
Link to this message
|
Well I cant seem to get anything to work right. Heres the story-
Long time ago (year, maybe a little more) used this drive to back up my dvds. Never had a problem with it. The drive is probably 2 and a half years old now but isnt used very often. About a year ago i started using it to back up dvds. Worked fine. I had Fujifilm dvds -R, which are horrible im aware, but they worked. Spindle ran out so i went to best buy and bought some more fujifilm. They didnt work. I kept getting illegal disc, etc etc. Tried Dvdshrink/nero as well as imgburn- neither worked.
So i started using memorex DVD+Rs which i had available. They gave me an illegal disc error on Nero and worked on img burn, so i continued. Problem was they didnt like dvd players so i had to switch. I bought some verbatim -Rs because everyone on every "help i cant burn dvds" forum ive been on raves about them. So I thought id try. I pop one in and I get "illegal disc" with Nero and "unsupported media" with imgburn. So I thought id post the Nero log first.
If anyone can take a look at this and give me any hints that would be great. Theres no firmware for my burner so thats not it, and it did work with the memorexs so Its not totally fried. I really am out of ideas here- Thanks guys.
-Ryan
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
Nero API version: 6.3.1.20
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.3.1.20
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVER07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W5224A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR CD-R PX-W5224A F: CDRom0
Memorex DVD+/-DLRWL1 F16 G: CDRom1
OR5013K ANX820R I: CDRom2
OR5013K ANX820R K: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 514MB (526800kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.7.2006
NeroAPI
11:30:00 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
11:30:00 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
11:30:00 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
11:30:00 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
11:30:00 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
11:30:00 PM #6 Text 0 File Writer.cpp, Line 124
Writer Memorex DVD+/-DLRWL1 F16 running
11:30:00 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:30:00 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:30:01 PM #9 Text 0 File Burncd.cpp, Line 3173
Turn on Disc-At-Once, using DVD media
11:30:01 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
11:30:01 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
11:30:01 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
11:30:01 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:30:01 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
11:30:01 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286128 | lead-out | 1 | 0x00 | 0x41
11:30:01 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
11:30:01 PM #17 Text 0 File Burncd.cpp, Line 4183
Cache writing successful.
11:30:01 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
11:30:01 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 4x (5,540 KB/s)
11:30:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:30:01 PM #21 Text 0 File DVDR.cpp, Line 1942
Recording mode: Sequential Recording Mode
11:30:01 PM #22 Text 0 File Mmc.cpp, Line 20513
Set BUFE: supported -> ON , Generic write control : ON
11:30:01 PM #23 Text 0 File DVDR.cpp, Line 2083
Start write address at LBA 0
DVD high compatibility mode: Yes
11:30:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:30:03 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x00CD0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:30:03 PM #26 CDR -1046 File Writer.cpp, Line 304
Illegal disc
11:30:03 PM #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
11:30:03 PM #28 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
11:30:03 PM #29 Text 0 File DVDR.cpp, Line 2325
EndDAO: Last written address was -1
11:30:04 PM #30 Phase 38 File APIProgress.cpp, Line 273
Burn process failed at 4x (5,540 KB/s)
11:30:04 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
11:30:04 PM #32 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 2:53:14 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 2:53:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 2:57:12 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 2. July 2006 @ 22:12
|
|
Advertisement
|
  |
|
|
Senior Member
|
2. July 2006 @ 19:55 |
Link to this message
|
Not sure which version of Nero you are running, believe it to be 6.3 something, upgrade to this version, 6.6.0.18 here,
http://www.filehippo.com/download_nero_burning_rom/?539 they say it is the best of the version 6 series.Quote:
Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.3.1.20
Your firmware is uptodate, my first thought, but you are okay,
Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 2:53:14 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 2:53:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 2:57:12 PM (InCD4 driver for win NT/2K/XP)
InCD doesn't play well with Nero Burning, you may want to reinstall Nero and leave out InCD.
DMA is not enabled in these two drives,
Quote:
CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 1 DMA: Off ,
You have plenty of memory available.
Quote:
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
Disk seems to be recognized,
All I can find is the InCD issue, unless one of the more educated senior members can find something else, (Hint Binkie or Gwen..)
I hope that this helps.
This message has been edited since posting. Last time this message was edited on 2. July 2006 @ 20:03
|
Moderator
|
2. July 2006 @ 20:43 |
Link to this message
|
@blivetNC - lol - you are too kind :)
Good work btw!!
@mog108
In addition to blivetNC good advice.
Your drive's max speed on -R is 8x and your using 16x media.
That may be part of the problem. I couldn't find the firmware's media codes right off. But I'm thinking you drive would do better w/ 16x if it was +R. For -r 8x rated media may be better for your drive.
The 2 drives w/ dma off you should be ok on - they look like virtual drives.
I would also update Nero to this version 6.6.0.18. Here's some links:
Package 1
http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
Package 2 (recode & vision)
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
|
|
mog108
Newbie
|
2. July 2006 @ 20:55 |
Link to this message
|
Well I uninstalled InCD.. i didnt do a full uninstall, i dont THINK it should matter but if someone things InCD will leave residue after a removal, let me know and ill completely uninstall and reinstall Nero (i really dont want to have to though.. haha)
I also upgraded to the new version you both gave and got the same error. Im posting the updated log now and then I will try to change the write speed. If that works, Ill repost. But Im assuming it wont, so if theres nothing more on this thread- it didnt work. haha Thanks for your help so far, dont give up on me! =)
-Ryan
New Log: [Updated Nero, Removed InCD]
Ryan
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <OR5013K ANX820R >Version: 1.0 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <dtscsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IC35L060AVER07-0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B200R0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : PLEXTOR CD-R PX-W5224A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On
CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 0 DMA: Off
CdRomPeripheral : OR5013K ANX820R 1.0 dtscsi Port 2 ID 1 DMA: Off
=== CDRom-Device-Map ===
PLEXTOR CD-R PX-W5224A F: CDRom0
Memorex DVD+/-DLRWL1 F16 G: CDRom1
OR5013K ANX820R I: CDRom2
OR5013K ANX820R K: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048096kB)
Free physical memory: 495MB (507644kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.7.2006
Burn DVD Image
12:51:33 AM #1 Text 0 File Reader.cpp, Line 127
Reader running
12:51:33 AM #2 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+/-DLRWL1 F16 running
12:51:33 AM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:51:34 AM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286036 (508:00.36, 4464MB)
12:51:34 AM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
12:51:34 AM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
12:51:34 AM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:51:34 AM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2286037 (2286037) = #2286037/508:0.37
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286037 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
12:51:34 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681803776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286037 | lead-out | 1 | 0x41 | 0x00
12:51:34 AM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:51:34 AM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:51:34 AM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:51:34 AM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:51:34 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
12:51:34 AM #15 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
12:51:34 AM #16 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
12:51:34 AM #17 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
12:51:34 AM #18 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:51:38 AM #19 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x07C90000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
12:51:38 AM #20 CDR -1046 File Writer.cpp, Line 311
Illegal disc
12:51:38 AM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:51:38 AM #22 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:51:38 AM #23 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
12:51:38 AM #24 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 1:59:42 AM (Adapter driver for rec)
File 'Drivers\dtscsi.sys': Ver=?.?.?.?, size=223128 bytes, created 11/28/2005 5:34:04 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 2. July 2006 @ 22:12
|
Moderator
|
2. July 2006 @ 21:35 |
Link to this message
|
Hey ryan
Forgot to add to edit your serial out of the post - begins w/ 1A (it's in both logs)
You can run the clean tool for InCD too - here's a link:
http://ww2.nero.com/nero6/us/InCD_CleanTool.html
Your memorex drive is actually an oem LiteOn 1633S. You could try flashing to that firmware to see if it helps w/ the 16x -R Verbs.
But I'm not the best in crossflashing - it may just be a simple flash as usual. Here's a link - the latest is BSOY:
http://forum.rpc1.org/dl_firmware.php?download_id=1934
Otherwsie look for the same brand or made in Japan Fuji. Sony or mexell 8x media.
|
|
mog108
Newbie
|
2. July 2006 @ 22:39 |
Link to this message
|
|
ran the clean incd tool- didnt work
Attempted to update firmware but the link doesnt work. haha ok well it works, but the download at the link doesnt.
|
Senior Member
|
3. July 2006 @ 01:49 |
Link to this message
|
mog108
Your memorex drive firmware is up to date.
http://forum.rpc1.org/dl_firmware.php?download_id=1925
BWSE is the latest, and that is what you have.
Your version of Nero is the one i would use if i were staying with 6x. Thats the 6.6.0.18 that binkie7 said to update.
So, lets break it down.
Your Nero is correct,
Your Firmware is up to date,
The only thing left is media or a drive error. Nero didnt report a drive error other than "not ready". I would suggest trying different media, trying to stick with Verbatims or Taiyo Yuden as the manufacturer. Now if you got fujis that were made in taiwan, you didnt get Tys. Also try different formats like + or - R. The last log says you removed IN CD, and as you said, you updated, Nero, that only leaves Media, or as a very distant second, the drive. Illegal disc errors usually are out of date firmware, or media as the main culprets. Media is cheap to try if you stick with small number of test dvds, on your purchase.
Nothing else seemed to stand out on that last log. Keep posting them as they fail, and maybe we will pin it down. I still suspect Media.. I know, you have heard it before, but dont dismiss it completly just yet. Usually Verbs do the trick, but not for every system out there.
Those name brands binkie7 recommended should be Made in Japan on the spindle packaging to get Taiyo Yuden as the manufacture (just like binkie7 said). :)
We should be able to get you going with 6x Nero, but it might take updating to Nero 7, if you try more media and they all come back "illegal disc". But save that as a last resort.
Sorry, thats all i can think of right now. Your in good hands with the ones who have been helping you. Im not as concerned about not visiting the forum as much, because the Nero crew is great.
Die CMC Mag!!!This message has been edited since posting. Last time this message was edited on 3. July 2006 @ 02:04
|
Member
|
3. July 2006 @ 07:59 |
Link to this message
|
|
Ok i was having the same problem and it was that i was trying to use 16x discs when my max burn speed was 8x. It was kinda weird since the discs were supposed to be 1-16x but w/e. try getting some 8x discs, thats what worked for me.
|
Moderator
|
3. July 2006 @ 11:11 |
Link to this message
|
|
@Xevlys
That's where firmware comes into play - your drive needs the media code to fully recognize and have the correct write strategy for the media you are using. Sometimes even having the latest one may not have the media code for the brand you're using.
Thanks for posting what worked for you!!
@mog108
Well no loss on the crossflash to the LiteOn. I can give you another link but there is no guarantee this will work either. Plus crossflashing can be a little riskier.
Best bet if using -R pick up 8x like Xevlys said worked for them & I adv. above. Use the brands we have posted.
Were you previous discs that worked rated 8x?
Keep us posted on your outcome!! Good,bad or otherwise.
@maxburn
I think you need to come and help more!!! We miss that great sense of humor ;)
|
Member
|
3. July 2006 @ 13:06 |
Link to this message
|
|
@binkie7
np ;) you were the one who helped me solve that problem hehe
|
Moderator
|
3. July 2006 @ 13:20 |
Link to this message
|
|
@Xevlys
lol - I'm glad my advice worked :0)
Happy burning!!
|
|
mog108
Newbie
|
3. July 2006 @ 20:17 |
Link to this message
|
|
Well So far this is my media selection
Fujifilm 8x -R : Worked
Sony 8x +R : Worked (Skips on DVD player)
Memorex 8x +R : Worked (Skips on DVD player)
Fujifilm 16x -R : Did Not Work
Verbatim 16x -R : Did Not Work
So judging from what Im hearing and actually paying attention to the maximum write speed of the DVD... it looks like my 16x LiteOn doesnt like 16x media. Interesting. That may just be the problem.
When I get around to it I'll get out and get another pack of 8xs and see how that works out.
I was under the impression, at least from personal experience, that +R media doesnt like stand alone dvd players as well as -R media. Is that valid or am I just running a string of bad luck? If thats not the case, what is the primary difference between those two?
|
Moderator
|
3. July 2006 @ 20:47 |
Link to this message
|
@mog108
Your drives max speed on -R media is 8x so I'm thinking they haven't updated the media codes for it on -r 16x. (last update was 6/2005)
+R media can be booktyped to make it almost universally compatible. Your drive supports 16x with +R.
Since it's a oem LiteOn you should be able to use LiteOn booktype utility.
http://us.liteonit.com/us/index.php?option=com_wrapper&Itemid=152
Or before you burn put a blank in the drive & go to Nero ToolKit>CD/DVD speed>extra>bitsetting and change to DVD Rom there. You will probably have to do this each time (same w/ the utility). Nero doesn't seem to like the automatic setting for LiteOn manufactured drives.
Players can also be picky - so try a lower speed w/ the +R. I would also check those +R that skipped in the dvd player in the pc and see if there are any problems there.
Keep us posted!
|
|
mog108
Newbie
|
4. July 2006 @ 13:21 |
Link to this message
|
well I bought some sony dvd -R 8xs and popped one in, used Nero to burn my disc image and rather than give me fits it just started burning- currently 5% done. So I think 16x DVDs are my problem, thanks to everyone for the help- Ive been trying to figure this thing out for much too long- haha
Hopefully it comes out and plays just fine- if not- hey i guess we'll continue this discussion... haha but I think itll work alright- thanks again guys (and girls)
|
Moderator
|
4. July 2006 @ 16:50 |
Link to this message
|
|
Ah your burn is finally going past the 4 seconds it was before! Good news!
Let us know either way how it turns out.
And your're welcome - glad we could help!
|
Member
|
4. July 2006 @ 21:41 |
Link to this message
|
|
wooo i helped someone... lol
well i guess i helped someone help someone >_> but i guess its a start maybe ill actually be useful on this forum instead of just coming here for help >_< lol
|
|
Advertisement
|
|
|
Senior Member
|
5. July 2006 @ 06:24 |
Link to this message
|
|
@Xevlys,
This is how we all got started I think.
Welcometo AD buddy.
|
|
