|
|
|
Illegal disk error
|
|
|
haivee
Newbie
|
2. July 2006 @ 21:08 |
Link to this message
|
Hi, I don't really know much about these sort of things so I was wondering if somebody here could help me.
The problem: Burning data dvds with TDK DVD+R 8x works fine but when I try to burn with TDK DVD+R 16x I get a message saying 'illegal disk'. I've checked my firmware and it seems to be up to date..
Here is my log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 4:35:34 PM
Nero version: 6.6.0.5 (Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 0 - 6.6.0.5
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <ATAPI CD-R/RW 48X16 >Version: 9.HH - HA 1 TA 1 - 6.6.0.5
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 200j E: CDRom0
ATAPI CD-R/RW 48X16 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523668kB)
Free physical memory: 252MB (258104kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.7.2006
ISO compilation
2:27:37 PM #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:27:37 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
2:27:37 PM #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running
2:27:37 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:27:37 PM #5 Text 0 File Burncd.cpp, Line 3155
Turn on Disc-at-once, using DVD media
2:27:37 PM #6 Text 0 File DlgWaitCD.cpp, Line 257
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2250505 (500:06.55, 4395MB)
2:27:37 PM #7 Text 0 File DlgWaitCD.cpp, Line 269
Write in overburning mode: NO (enabled: CD)
2:27:37 PM #8 Text 0 File DlgWaitCD.cpp, Line 2310
Recorder: HP DVD Writer 200j, Media type: DVD+R
2:27:37 PM #9 Text 0 File DlgWaitCD.cpp, Line 431
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:27:37 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 829
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2250656 (2250656) = #2250656/500:8.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2250656 blocks [HP DVD Writer 200j]
--------------------------------------------------------------
2:27:37 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1042
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4609343488, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2250656 | lead-out | 1 | 0x41 | 0x00
2:27:37 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:27:38 PM #13 Text 0 File Burncd.cpp, Line 4042
Cache writing successful.
2:27:38 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:27:38 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
2:27:38 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2604
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:27:38 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x037F7400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
2:27:38 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
2:27:38 PM #19 Text 0 File DVDR.cpp, Line 5549
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:27:38 PM #20 CDR -1211 File DVDR.cpp, Line 4754
Book Type set to: DVD-ROM
2:27:38 PM #21 Text 0 File DVDPlusRW.cpp, Line 606
Start write address at LBA 0
DVD high compatibility mode: No
2:27:54 PM #22 SCSI -1046 File Cdrdrv.cpp, Line 1432
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03250000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
2:27:54 PM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
2:27:54 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:27:54 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:27:56 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
2:27:56 PM #27 Text 0 File DVDR.cpp, Line 5549
Drive: HP DVD Writer 200j
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
2:27:56 PM #28 CDR -1211 File DVDR.cpp, Line 4754
Book Type set to: DVD-ROM
2:27:56 PM #29 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 7:16:24 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/17/2006 6:23:54 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Moderator
1 product review
|
3. July 2006 @ 04:32 |
Link to this message
|
Quote:
Burning data dvds with TDK DVD+R 8x works fine but when I try to burn with TDK DVD+R 16x
This tells me that your firmware is too old to recognize the new media.
Quote:
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 0 - 6.6.0.5
I couldn't find your exact drive on RPC1, but I assume that it is in the same family as the 200i/e but maybe an OEM drive. If this is the case there hasn't been support for this drive since 2004. Looks like HP has abandoned the drive and is trying to force you to buy a new drive.
http://forum.rpc1.org/dl_firmware.php?download_id=309
You may only be able to burn the 8X media unless you upgrade to a new drive. TDK are not a recommended brand, but if you have success with them try to find some old 8X discs and stick with it.
You may also want to upgrade to version 6.6.0.18, but don't go past it as advanced versions are full of bugs. DL both packages from here:
http://my.afterdawn.com/locoeng/blog_entry.cfm/280
Quote:
Recorder: HP DVD Writer 200j, Media type: DVD+R
This should be a three line paragraph that includes the MID of your discs....see above statements.
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 7:16:24 AM
This is Roxio's driver that is known to create conflicts when burning with Nero. I would suggest removing it in it's entirety from your system via this clean tool:
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
|
AfterDawn Addict
|
3. July 2006 @ 04:50 |
Link to this message
|
Just as a reference, the CDRALW2K.sys can be installed unknowingly if you have the latest Winamp.
Quote:
10. Sonic Ripping/Burning Support (bundled 3rd-party app/engine)
Filenames: pxsdkpls.dll (pre-5.22) | primosdk.dll (post-5.22) | burnlib.dll (winamp dir).
px.dll | pxdrv.dll | pxmas.dll | pxwave.dll | pxwma.dll | pxcpya64.exe | pxcpyi64.exe | pxhpinst.exe | pxinsa64.exe | pxinsi64.exe | vxblock.dll (%system% dir).
pxhelp20.sys | cdralw2k.sys | cdr4_2k.sys (Win2k) | cdr4_xp.sys (WinXP) | pxhelper.vxd (Win98SE/ME) | pxhelper.sys (WinNT4) (%system%\drivers dir).
Adds 3rd-party support for Burning CD's (at 8x speed with Winamp Full, at unlimited speed with Winamp Pro).
Requires a reboot on first install for Sonic Engine to be properly registered.
Not recommended to install under Win9x (says it supports Win98SE up, but I'm not so sure).
Also not recommended to install under Windows Vista public beta 2.
You should uncheck this option if any Roxio burning software is installed.
You should also be wary of this option if any other Sonic products (MyDVD, RecordNow, etc) or MS Digital Photo Suite are installed (more info).
Note: You can still use the CD Ripper if you uncheck this feature and if aspi/wnaspi32.dll is installed (details).
http://forums.winamp.com/showthread.php?threadid=199851
|
Member
|
3. July 2006 @ 13:04 |
Link to this message
|
|
I had the same problem. It turned out that even though my firware was the latest version it still did not support the 16x discs. the 16x gave illegal disc error, but the 8x worked fine. i suggest you stick with the 8x. thats just my experience :)
|
|
haivee
Newbie
|
5. July 2006 @ 21:35 |
Link to this message
|
I upgraded to version 6.6.0.18 and used Roxio zap, but now when I try to burn the 16x DVD+R I get the message 'Could not perform end of Disc-at-once'. Does that mean anything? Burning 8x still works fine.
Here's my new log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <HP DVD Writer 200j> Version: 1.72 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HP DVD Writer 200j >Version: 1.72 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST380020A atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HP DVD Writer 200j atapi Port 1 ID 0 DMA: On
CdRomPeripheral : ATAPI CD-R/RW 48X16 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HP DVD Writer 200j E: CDRom0
ATAPI CD-R/RW 48X16 F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523668kB)
Free physical memory: 164MB (168336kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.7.2006
ISO compilation
2:17:10 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:17:10 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
2:17:10 PM #3 Text 0 File Writer.cpp, Line 122
Writer HP DVD Writer 200j running
2:17:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:17:10 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:17:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2037663 (452:48.63, 3979MB)
2:17:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
2:17:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HP DVD Writer 200j, Media type: DVD+R
2:17:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:17:10 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2037664 (2037664) = #2037664/452:48.64
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2037664 blocks [HP DVD Writer 200j]
--------------------------------------------------------------
2:17:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HP DVD Writer 200j] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4173135872, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2037664 | lead-out | 1 | 0x41 | 0x00
2:17:20 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:17:20 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:17:20 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:17:20 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
2:17:20 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:17:20 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06E60600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
2:17:20 PM #18 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
2:17:20 PM #19 Text 0 File DVDR.cpp, Line 6168
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:17:20 PM #20 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
2:17:20 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
2:17:59 PM #22 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x069C0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x30 0x05
2:17:59 PM #23 CDR -1046 File Writer.cpp, Line 311
Illegal disc
2:17:59 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:17:59 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:17:59 PM #26 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
2:17:59 PM #27 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
2:17:59 PM #28 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xF9 0x15 0x01 0xFF 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0C
0x00 0x00 0x00 0x00 0x24 0x00
2:17:59 PM #29 Text 0 File DVDR.cpp, Line 6168
Drive: HP DVD Writer 200j
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:17:59 PM #30 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
2:17:59 PM #31 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
2:18:00 PM #32 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/20/2006 7:16:24 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 5/17/2006 6:23:54 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 6:59:44 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 5. July 2006 @ 21:37
|
AfterDawn Addict
|
5. July 2006 @ 21:39 |
Link to this message
|
|
|
haivee
Newbie
|
5. July 2006 @ 22:23 |
Link to this message
|
|
Thanks, I've removed the Roxio thing now. Does 'Could not perform end of Disc-at-once' mean anything?
|
|
Advertisement
|
|
|
|
Saltgrass
Senior Member
|
6. July 2006 @ 07:37 |
Link to this message
|
|
I have an HP 200j/i and I have had good luck using Verbatim 1-2.4x DVD +R.
Nero 7 v7.10.1.0
P4 2.4GHz 1 Gig RAM
NEC ND3550A DVD Burner
|
|
