|
|
|
Invalid Block Address?
|
|
|
pcaddict
Suspended due to non-functional email address
|
10. July 2006 @ 16:30 |
Link to this message
|
Hello
I have a Cyberdrive DVD burner that does not burn dvds any more. It happened after i left it on overnight to author a dvd. It can burn cds and read dvds fine. It is about 2 years old. Here is my log.
1A20-021N-XXXX-1286-0950-XXXX
1A21-3582-XXXX-5172-7376-XXXX
1A23-0009-XXXX-2319-0874-XXXX
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56 a.m.
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 p.m.
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <DVDR/RW DX162D-A> Version: 100F - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.18
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTLA-307030 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDR/RW DX162D-A atapi Port 1 ID 1 DMA: Off
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
CdRomPeripheral : MagicISOVirtual DVD-ROM 1.0A mcdbus Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDR/RW DX162D-A D: CDRom0
AXV CD/DVD-ROM H: CDRom1
MagicISO Virtual DVD-ROM F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 94MB (97172kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.6.2006
UDF/ISO compilation
10:35:37 a.m. #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
10:35:37 a.m. #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
10:35:37 a.m. #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:35:37 a.m. #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
10:35:37 a.m. #5 Text 0 File Reader.cpp, Line 127
Reader running
10:35:37 a.m. #6 Text 0 File Writer.cpp, Line 122
Writer DVDR/RW DX162D-A running
10:35:37 a.m. #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:35:37 a.m. #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:35:37 a.m. #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:35:38 a.m. #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2047327 (454:57.52, 3998MB)
10:35:38 a.m. #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
10:35:38 a.m. #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVDR/RW DX162D-A, Media type: DVD+R
10:35:38 a.m. #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:35:38 a.m. #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2047328 (2047328) = #2047328/454:57.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2047328 blocks [DVDR/RW DX162D-A]
--------------------------------------------------------------
10:35:38 a.m. #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVDR/RW DX162D-A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4192927744, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2047328 | lead-out | 1 | 0x41 | 0x00
10:35:38 a.m. #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:35:38 a.m. #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:35:38 a.m. #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:35:38 a.m. #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
10:35:38 a.m. #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:35:38 a.m. #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09910600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
10:35:38 a.m. #22 Text 0 File DVDR.cpp, Line 6168
Drive: DVDR/RW DX162D-A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:35:38 a.m. #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
10:35:38 a.m. #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:36:32 a.m. #25 Text 0 File Cdrdrv.cpp, Line 1288
10:36:32.136 - DVDR/RW DX162D-A\H1 T1 : Queue again later
10:36:32 a.m. #26 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x069F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x9E 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x21 0x02
10:36:32 a.m. #27 CDR -1064 File Writer.cpp, Line 311
Invalid block address
10:36:32 a.m. #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:36:32 a.m. #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:38:12 a.m. #30 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:38:12 a.m. #31 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10:38:12 a.m. #32 Text 0 File DVDR.cpp, Line 6168
Drive: DVDR/RW DX162D-A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
10:38:12 a.m. #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02 a.m.
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 5/12/2005 5:12:26 p.m. (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 20, 1, size=101504 bytes, created 25/07/2005 11:53:28 a.m. (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 20, 1, size=29696 bytes, created 25/07/2005 11:53:04 a.m. (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 20, 1, size=8704 bytes, created 25/07/2005 11:53:30 a.m. (InCD4 driver for win NT/2K/XP)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86656 bytes, created 24/08/2001 12:00:00 a.m. (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 9:33:00 a.m. (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any sugestions or should i just get a new DVD burner?
|
|
Advertisement
|
|
|
|
Moderator
|
10. July 2006 @ 16:57 |
Link to this message
|
Hi pcaddict
Let's try some of these suggestions 1st and see how it's goes:
Quote:
Recorder: <DVDR/RW DX162D-A> Version: 100F
Can use a firmware update - the latest is 120F.
http://forum.rpc1.org/dl_firmware.php?download_id=1958
This may help your drive recognize the media you are using - all it can see is this: Recorder: DVDR/RW DX162D-A, Media type: DVD+R
Usually you'll also see the manfacturer and the media code. Missing in yours.
What brand are you using and the rated burn speed? Like Sony 8x.
Quote:
CdRomPeripheral : DVDR/RW DX162D-A atapi Port 1 ID 1 DMA: Off
Turn DMA back on for the burner. Here's a guide:
http://forums.afterdawn.com/thread_view.cfm/260038Quote:
Physical memory : 255MB
Free physical memory: 94MB
Memory in use : 62 %
512 mb in memory is better - add more if you can to help. For now keep are much free as possible and no multitasking.
Quote:
File 'Drivers\InCDfs.SYS'
If your not using Nero's InCD - uninstall it and run the clean tool. Can sometimes cause problems.
http://ww2.nero.com/nero6/us/InCD_CleanTool.html
This message has been edited since posting. Last time this message was edited on 10. July 2006 @ 16:58
|
|
pcaddict
Suspended due to non-functional email address
|
11. July 2006 @ 22:48 |
Link to this message
|
|
Thanks for the suggestions, i will try them.
|
|
pcaddict
Suspended due to non-functional email address
|
12. July 2006 @ 15:49 |
Link to this message
|
|
|
Moderator
|
12. July 2006 @ 16:00 |
Link to this message
|
|
|
pcaddict
Suspended due to non-functional email address
|
29. July 2006 @ 18:54 |
Link to this message
|
could not download firmware from cyberdrive websites, corrupted .zip files. used 140f instead from dangerous brothers. i did most of what you said but still had a problem. i burned at 8x but if i burn at 4x would it work. i have wasted many dvds. i use imation though, could that be the problem. here is the latest log.
1A20-XXXX-XXXX-1286-XXXX-6733* NE 6
1A21-XXXX-XXXX-5172-XXXX-7754 NE Enterprise
1A23-XXXX-XXXX-2125-XXXX-8089 NE Ultra
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 17/07/2002 9:20:56 a.m.
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 p.m.
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <DVDR/RW DX162D-A> Version: 140F - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 2 TA 0 - 6.6.0.18
Adapter driver: <a347scsi> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DTLA-307030 atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 2B020H1 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : DVDR/RW DX162D-A atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a a347scsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
DVDR/RW DX162D-A D: CDRom0
AXV CD/DVD-ROM F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 37MB (38296kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
30.7.2006
UDF/ISO compilation
2:34:27 p.m. #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
2:34:27 p.m. #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
2:34:27 p.m. #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:34:28 p.m. #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
2:34:28 p.m. #5 Text 0 File Reader.cpp, Line 127
Reader running
2:34:28 p.m. #6 Text 0 File Writer.cpp, Line 122
Writer DVDR/RW DX162D-A running
2:34:28 p.m. #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:34:28 p.m. #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:34:28 p.m. #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:34:28 p.m. #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2047327 (454:57.52, 3998MB)
2:34:28 p.m. #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:34:28 p.m. #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: DVDR/RW DX162D-A, Media type: DVD+R
2:34:28 p.m. #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:34:28 p.m. #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2047328 (2047328) = #2047328/454:57.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2047328 blocks [DVDR/RW DX162D-A]
--------------------------------------------------------------
2:34:28 p.m. #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [DVDR/RW DX162D-A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4192927744, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2047328 | lead-out | 1 | 0x41 | 0x00
2:34:28 p.m. #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:34:28 p.m. #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:34:28 p.m. #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:34:29 p.m. #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
2:34:29 p.m. #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:34:29 p.m. #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x097D0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
2:34:29 p.m. #22 Text 0 File DVDR.cpp, Line 6168
Drive: DVDR/RW DX162D-A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:34:29 p.m. #23 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
2:34:29 p.m. #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
2:40:40 p.m. #25 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09030000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x10 0xC4 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
2:40:40 p.m. #26 CDR -1135 File Writer.cpp, Line 311
Write error
2:40:40 p.m. #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:40:40 p.m. #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:40:59 p.m. #29 Text 0 File DVDR.cpp, Line 6168
Drive: DVDR/RW DX162D-A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:40:59 p.m. #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 17/07/2002 8:53:02 a.m.
File 'Drivers\PXHELP20.SYS': Ver=2.02.56a, size=17168 bytes, created 2/11/2004 8:02:55 a.m. (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86656 bytes, created 24/08/2001 12:00:00 a.m. (Adapter driver for rec)
File 'Drivers\a347scsi.sys': Ver=3.47.0.0 built by: WinDDK, size=5248 bytes, created 30/04/2004 9:33:00 a.m. (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
thx
This message has been edited since posting. Last time this message was edited on 29. July 2006 @ 18:56
|
Moderator
|
29. July 2006 @ 21:50 |
Link to this message
|
Hi pcaddict
Yes those Imation's could be your problem - your drive still doesn't recognize them even after the Dangerous Bros firmware update - maybe why 4x is working and not 8x. For those stick with 4x.
Better would be Verbatim or made in japan only Sony. Fuji or Maxell.
I just tried the download from Cyberhome - no corrupt files. You might want to try redownloading the firmware and trying the 170F.
Quote:
Physical memory : 255MB
Free physical memory: 37MB
Memory in use : 85 %
More in use this in this log - try and keep as much free as possible. No multi tasking and shut down any unncesscary programs.
|
|
pcaddict
Suspended due to non-functional email address
|
10. August 2006 @ 23:21 |
Link to this message
|
|
how do you keep your memory low as possible. i closed all programs at the start. i don't know what processes to close in task manager.
|
|
Advertisement
|
|
|
Moderator
|
11. August 2006 @ 15:23 |
Link to this message
|
|
Hi pcaddict
Ok - just check the bottom right hand in the system tray and see if anything is running there like im's, iTunes, antivirus (disconnect from internet first).
When they are turned off before you burn you can look in task manager under performance and see how much is free.
If you can add a 256mb stick of ram - that would be best.
Are you still having problems burning?
|
|
