|
|
|
Error writing with usb 2.0 external DVD
|
|
|
jrenck
Newbie
|
12. July 2006 @ 18:10 |
Link to this message
|
I'm getting a lot of problems trying to write DVD with my USB 2.0 external DVD writer, most of them are being written really slowly or they just fail. I'm using Nero OEM version tha came with my LG Multi Recorder HL-DT-ST DVDRAM GSA-H10A with the latest firmware update.
My pc is a laptop Compaq NX9005, 1GB RAM, 40GB HD, the USB 2.0 port is being provided by a DLINK pcmcia.
Any idea what is going on?
Cheers!
Johann
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 12/19/2005 4:16:04 AM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10A>Version: JL04 - HA 2 TA 0 - 6.6.0.19
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY CD-RW CRX830E >Version: JPK4 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST94011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX830E atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY CD-RW CRX830E D: CDRom0
HL-DT-ST DVDRAM GSA-H10A E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 894MB (915952kB)
Free physical memory: 468MB (479932kB)
Memory in use : 47
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.7.2006
Burn DVD Image
9:48:18 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
9:48:18 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10A running
9:48:18 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:48:18 PM #4 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1975876 (439:05.01, 3859MB)
9:48:18 PM #5 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)
9:48:18 PM #6 Text 0 File DlgWaitCD.cpp, Line 2489
Recorder: HL-DT-ST DVDRAM GSA-H10A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193
9:48:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:48:18 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1975877 (1975877) = #1975877/439:5.2
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1975877 blocks [HL-DT-ST DVDRAM GSA-H10A]
--------------------------------------------------------------
9:48:18 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-H10A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4046596096, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1975877 | lead-out | 1 | 0x41 | 0x00
9:48:18 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:48:19 PM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
9:48:19 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:48:19 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
9:48:19 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
9:48:19 PM #15 Text 0 File DVDR.cpp, Line 2579
Recording mode: Sequential Recording Mode
9:48:19 PM #16 Text 0 File Mmc.cpp, Line 21820
Set BUFE: Buffer underrun protection -> ON
9:48:19 PM #17 Text 0 File DVDR.cpp, Line 2734
Start write address at LBA 0
DVD high compatibility mode: Yes
9:48:19 PM #18 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 40 00 10 20 30 00 00 - 00 00 00 21 00 00 00 00 .@...0.....!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:48:41 PM #19 SCSI -500 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x030E0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
9:48:41 PM #20 SCSI -1114 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x0BEE1400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x0C 0x29 0x00
9:48:42 PM #21 CDR -1114 File Writer.cpp, Line 311
Reset occurred
9:48:42 PM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:48:42 PM #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:48:42 PM #24 Text 0 File DVDR.cpp, Line 2977
EndDAO: Last written address was -1
9:48:42 PM #25 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
12. July 2006 @ 19:09 |
Link to this message
|
|
Hi jrenck
Something could be hanging up your drive. Reason your receiving a reset error/scsi command error. Your burn failure happens within 30 secs from this log.
Check to see if there are any driver updates for your card at DLinks site.
If you have any other external devices hooked up to the lappy while burning - try disconnecting them.
If you have another usb 2.0 port you can try that one.
The discs you're using are made by Optodisc - iffy - but maybe not be playing into this error. Better to use would be Verbatim or made in Japan Fuji or Sony.
Try the other suggestions 1st & let's see how that goes.
|
|
jrenck
Newbie
|
18. July 2006 @ 16:04 |
Link to this message
|
Thanks a lot for your help.
I changed the driver for my pcmcia usb2.0 card and I could write the disk properly but I was getting a changing buffer level and also the writing speed was 4X while my writer should do 8X.
I search through google and I found that there are other people that are getting the same kind of issue but they think that is associated with the pcmcia card bus controller and windows windows XP, I coudln't find a fix for it. My cardbus is O2Micro OZ6933 CardBus Controller, any thoughts about it?
Many thanks again.
The last log that I've got is:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 12/19/2005 4:16:04 AM
Nero Version: 6.6.0.19
Internal Version: 6, 6, 0, 19
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10A>Version: JL04 - HA 3 TA 0 - 6.6.0.19
Adapter driver: <> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY CD-RW CRX830E >Version: JPK4 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST94011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY CD-RW CRX830E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : MR3353K SXO357Z 1.0 dtscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY CD-RW CRX830E D: CDRom0
MR3353K SXO357Z G: CDRom1
HL-DT-ST DVDRAM GSA-H10A E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 894MB (915952kB)
Free physical memory: 482MB (494536kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.7.2006
Burn DVD Image
2:45:17 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
2:45:17 PM #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10A running
2:45:17 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:45:17 PM #4 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2130326 (473:24.26, 4160MB)
2:45:17 PM #5 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)
2:45:17 PM #6 Text 0 File DlgWaitCD.cpp, Line 2489
Recorder: HL-DT-ST DVDRAM GSA-H10A, Media type: DVD-R
Disc Manufacturer: OPTODI - SCR008
Disc Application Code: 64, Disc Physical Code: 193
2:45:17 PM #7 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:45:17 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2130327 (2130327) = #2130327/473:24.27
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2130327 blocks [HL-DT-ST DVDRAM GSA-H10A]
--------------------------------------------------------------
2:45:17 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-H10A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4362909696, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2130327 | lead-out | 1 | 0x41 | 0x00
2:45:17 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:45:18 PM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:45:18 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:45:18 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
2:45:18 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
2:45:18 PM #15 Text 0 File DVDR.cpp, Line 2579
Recording mode: Sequential Recording Mode
2:45:18 PM #16 Text 0 File Mmc.cpp, Line 21820
Set BUFE: Buffer underrun protection -> ON
2:45:18 PM #17 Text 0 File DVDR.cpp, Line 2734
Start write address at LBA 0
DVD high compatibility mode: Yes
2:45:18 PM #18 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 40 00 10 20 30 00 00 - 00 00 00 21 00 00 00 00 .@...0.....!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:45:41 PM #19 Text 0 File Cdrdrv.cpp, Line 1289
14:45:41.281 - HL-DT-ST DVDRAM GSA-H10A\H3 T0 : Queue again later
2:56:57 PM #20 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-H10A > start writing Lead-Out at LBA 2130327 (208197h), lenght 0 blocks
2:56:57 PM #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:56:57 PM #22 Text 0 File DVDR.cpp, Line 2977
EndDAO: Last written address was 2130319
2:57:23 PM #23 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.09a, size=46080 bytes, created 8/19/2005 6:00:00 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Advertisement
|
|
|
Moderator
|
18. July 2006 @ 17:08 |
Link to this message
|
|
Hi jrneck
Glad the drivers update got you burning again.
Now the possiblbe conflict between pcmcia card bus controller and XP
that I can be of no help with. DLinks might be so I would check with them.
This log shows a burn started and ending at 8x.
The Optodisc may be part this new problem. Poorer quality media doesn't always support the speeds they are rated. You can have inconsistency in the same spindle. So you might also want to try some of the media recommended in the above post & see if that helps.
Oh and you're welcome!
Keep us posted!
|
|
