|
|
|
Movies Skipping
|
|
|
belly2000
Inactive
|
13. July 2006 @ 08:54 |
Link to this message
|
Guys,
I posted a few days ago on DVD Newbies with burning problems, and I thought I'd resolved it but I haven't. Basically I burn via iamge, vobs, alcohol files using Nero 7, Ulead, DVDFab etc. Using all of them the movie skips for 30 seconds after 12 minutes (always the same place - on about 40 DVDs now), then the same after 30 minutes and similar every 30 minutes or so after that.
After my last post I explained I used 8X Ridisc, datawrite DVD-R etc, most of the guys said it's the media. I tried a Verbatim I had hanging around - thought I'd cracked it but I haven't - it was just that the skip was smoother and I didn't notice it. So I picked up some Taiyo TYG02 last night - still skipping same place even with these.
Any other ideas? My writer is an external LG 2164 16X, I've updated the firmware. Is there anything I can run to check. I know Nero had a DVD info tool, or anything else that I can run then do a grab and post the results here so you guys can have a look. I've also cleaned the lens with a normal lens cleaner disc. Or any other ideas of what the problem is?
Cheers in advance
|
|
Trom
Member
|
13. July 2006 @ 10:40 |
Link to this message
|
When you burn files using Nero it creates a Log file. I think when the job is finished it might ask you if you want to save the log file. Select Yes and post the log file here making sure to edit out your serial number. The serial number is normally shown at the beginning of the log file.
|
|
belly2000
Inactive
|
14. July 2006 @ 09:52 |
Link to this message
|
As requested, here is a copy of the log file:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.2.3.2
Internal Version: 7, 2, 3, 2
(Nero Express)
Recorder: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 1 TA 2 - 7.2.3.2
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVDRRW GSA-2164D>Version: 1.01 - HA 1 TA 2 - 7.2.3.2
Adapter driver: <USB 2.0> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHT2060AT atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA DVD-RAM UJ-815A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : YT2295R TJF175T 2.0B vaxscsi Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
MATSHITA DVD-RAM UJ-815A D: CDRom0
YT2295R TJF175T E: CDRom1
HL-DT-ST DVDRRW GSA-2164D F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 253MB (259300kB)
Memory in use : 75 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.7.2006
Burn DVD Image
18:32:49 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
18:32:49 #2 Text 0 File Reader.cpp, Line 124
Reader running
18:32:49 #3 Text 0 File Writer.cpp, Line 113
Writer F: HL-DT-ST DVDRRW GSA-2164D running
18:32:49 #4 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
18:32:49 #5 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2263397 (502:58.47, 4420MB)
18:32:49 #6 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
18:32:50 #7 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: HL-DT-ST DVDRRW GSA-2164D, Media type: DVD-R
Disc Manufacturer: TYG02 -
Disc Application Code: 64, Disc Physical Code: 193
18:32:50 #8 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
18:32:50 #9 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2263398 (2263398) = #2263398/502:58.48
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2263398 blocks [F: HL-DT-ST DVDRRW GSA-2164D]
--------------------------------------------------------------
18:32:50 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: HL-DT-ST DVDRRW GSA-2164D] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4635439104, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2263398 | lead-out | 1 | 0x41 | 0x00
18:32:50 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
18:32:50 #12 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
18:32:50 #13 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
18:32:50 #14 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
18:32:50 #15 Text 0 File DVDR.cpp, Line 2869
Recording mode: Sequential Recording Mode
18:32:50 #16 Text 0 File DVDR.cpp, Line 3025
Start write address at LBA 0
DVD high compatibility mode: Yes
18:32:50 #17 SPTI -1066 File SCSIPassThrough.cpp, Line 291
F: CdRom2: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 01 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0E 00 00 00 00 24
Buffer x04152600: Len x1008
18:32:50 #18 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
18:44:16 #19 Text 0 File WriterStatus.cpp, Line 116
<F: HL-DT-ST DVDRRW GSA-2164D> start writing Lead-Out at LBA 2263398 (228966h), length 0 blocks
18:44:16 #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
18:44:16 #21 Text 0 File DVDR.cpp, Line 3265
EndDAO: Last written address was 2263391
18:44:46 #22 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
