|
|
|
Nero Illegal Disc Error
|
|
|
brad38
Newbie
|
14. July 2006 @ 02:03 |
Link to this message
|
Please can someone help me with this illegal disk error!
-------------------------------------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 10/12/2001 5:32:34 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 17/12/2003 4:18:04 AM
Nero version: 6.3.1.4 (Nero Express)
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.3.1.4
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD_RW ND-2500A >Version: 1.06 - HA 1 TA 0 - 6.3.1.4
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75FRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120022A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON CD-RW SOHR-5238S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A G: CDRom0
LITE-ON CD-RW SOHR-5238S H: CDRom1
Generic DVD-ROM I: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
CmdQueuing : 1
CmdNotification: 2
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
EraseSpeed : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 625MB (640604kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
14.7.2006
Burn DVD Image
7:54:57 PM #1 Text 0 File Reader.cpp, Line 118
Reader running
7:54:57 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 110702592
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 RecDep=0x00 Start=954437:08.46 ( -150)
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 RecDep=0x00 Start=00:00.00 ( 0)
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 RecDep=0x00 Start=478:00.56 ( 2151056)
MTYP: Mediumtype = (0x4305E)
Image file name: <C:\dawsons creek images\dcs1d100.nrg>
7:54:57 PM #3 Text 0 File Burncd.cpp, Line 3188
Turn on Disc-at-once, using DVD media
7:54:57 PM #4 Text 0 File DlgWaitCD.cpp, Line 244
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2151055 (478:00.55, 4201MB)
7:54:57 PM #5 Text 0 File DlgWaitCD.cpp, Line 249
Write in overburning mode: FALSE
7:54:57 PM #6 Text 0 File DlgWaitCD.cpp, Line 2107
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
7:54:57 PM #7 Text 0 File DlgWaitCD.cpp, Line 410
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:54:57 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2151056 (2151056) = #2151056/478:0.56
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2151056 blocks [_NEC DVD_RW ND-2500A ]
--------------------------------------------------------------
7:54:57 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 982
Prepare recorder [_NEC DVD_RW ND-2500A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4405362688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2151056 | lead-out | 1 | 0x00 | 0x41
7:54:58 PM #10 Phase 24 File dlgbrnst.cpp, Line 1807
Caching of files started
7:54:58 PM #11 Text 0 File Burncd.cpp, Line 4195
Cache writing successful.
7:54:58 PM #12 Phase 25 File dlgbrnst.cpp, Line 1807
Caching of files completed
7:54:58 PM #13 Phase 36 File dlgbrnst.cpp, Line 1807
Burn process started at 2.4x (3,312 KB/s)
7:54:58 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2334
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:54:58 PM #15 Text 0 File DVDR.cpp, Line 1597
Recording mode: Sequential Recording Mode for Multisession
7:54:58 PM #16 Text 0 File Mmc.cpp, Line 19872
Set BUFE: JustLink -> ON
7:54:58 PM #17 Text 0 File DVDR.cpp, Line 1738
Start write address at LBA 0
DVD high compatibility mode: Yes
7:54:58 PM #18 Text 0 File Cdrdrv.cpp, Line 7993
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:54:58 PM #19 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x20 0xD2 0x90 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
7:54:58 PM #20 CDR -1046 File ThreadedTransferInterface.cpp, Line 1607
Illegal disc
7:54:58 PM #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1607
Could not perform start of Disc-at-once
7:54:58 PM #22 Phase 38 File dlgbrnst.cpp, Line 1807
Burn process failed at 2.4x (3,312 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 10/12/2001 5:29:42 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 23/09/2004 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 1:27:50 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Senior Member
|
14. July 2006 @ 02:18 |
Link to this message
|
Its probably the discs, looks like they are TDK manufacture.
Quote:
Disc Manufacturer: TTH02 -
Try Verbatim or Taiyo Yuden manufacture discs.
Your firmware is out of date, and updating that might help the drive burn those discs.
Quote:
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06
http://forum.rpc1.org/dl_firmware.php?download_id=1740
Looks like you can go to 1.0A as the latest for that NEC drive.
Try those things with the firmware update for the drive first, then switch to a different disc manufacture if you still get illegal disc error after firmware update.
Die CMC Mag!!!This message has been edited since posting. Last time this message was edited on 14. July 2006 @ 02:21
|
AfterDawn Addict
|
14. July 2006 @ 02:26 |
Link to this message
|
|
|
brad38
Newbie
|
14. July 2006 @ 02:28 |
Link to this message
|
|
Thanks for your quick reply,
on the subject of firmware,
This drive is actually an ND-2100a, that has been flashed up to a 2500. Will this affect my ability to update the firmware further?
|
Senior Member
|
14. July 2006 @ 02:30 |
Link to this message
|
Hi Gwen!
Its been so long, i thought that Nero version was the updated one. LOL
Guess im a bit rusty. :)
I've been working too much to spare the time to come here, so i just made the time while on my break.
I will try to pop in more often, when i can.
@brad38
If the drive has been crossflashed, you should be able to stick with the current firmware.
If you have problems, here is the firmware for the ND-2100A
http://forum.rpc1.org/dl_firmware.php?download_id=1793
I would try updating with the crossflashed firmware first, and see if that helps with the drive burning the TDK discs.
The major problem you might have with updating firmware is that you are many versions behind. If you try the latest firmware, and the update says it is only for an ND-2500A, try going progressivly up in firmware updates until you get to the latest. IE go to 1.07 or 1.09 first if 1.0A is not taking.
Die CMC Mag!!!
This message has been edited since posting. Last time this message was edited on 14. July 2006 @ 02:39
|
AfterDawn Addict
|
14. July 2006 @ 03:14 |
Link to this message
|
@brad38
Looks like your trying to copy using disc at once with Nero onto poor media. All times are within the same minute. It just never gets started. Is the disc copy protected or dirty? What other programs are you using?
|
|
brad38
Newbie
|
17. July 2006 @ 02:11 |
Link to this message
|
i have a bunch of images i am trying to burn to dvd, It works fine with an imation DVD-RW. i am sure its the disks, and i think gettin new disks would be a fair bit easier than trying to update the firmware, however i do like a challenge.
|
AfterDawn Addict
|
17. July 2006 @ 02:17 |
Link to this message
|
Have you updated your Nero to suggested version.
|
|
brad38
Newbie
|
17. July 2006 @ 02:26 |
Link to this message
|
|
i'm downloading it aat the moment. thanks heaps.
|
|
brad38
Newbie
|
17. July 2006 @ 03:02 |
Link to this message
|
UPDATE
----------------------------------
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.70, size=45568 bytes, created 10/12/2001 5:32:34 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <_NEC DVD_RW ND-2500A> Version: 1.06 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <Generic DVD-ROM >Version: 1.0 - HA 2 TA 0 - 6.6.0.18
Adapter driver: <d346prt> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800BB-75FRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST3120022A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2500A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : LITE-ON CD-RW SOHR-5238S atapi Port 1 ID 1 DMA: On
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 0 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 1 DMA: Off
CdRomPeripheral : Generic DVD-ROM 1.0 d346prt Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
_NEC DVD_RW ND-2500A G: CDRom0
LITE-ON CD-RW SOHR-5238S H: CDRom1
Generic DVD-ROM I: CDRom2
Generic DVD-ROM K: CDRom3
Generic DVD-ROM L: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047532kB)
Free physical memory: 613MB (628292kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.7.2006
Burn DVD Image
8:58:10 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
8:58:10 PM #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 0
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 307200, NextTrackFilePos = 4677054464
CUES:
0: Ctrl=0x41 Trk= 0 (0x00) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
1: Ctrl=0x61 Trk= 1 (0x01) Index=00 Start=954437:08.46 ( -150) RecDep=0x00
2: Ctrl=0x61 Trk= 1 (0x01) Index=01 Start=00:00.00 ( 0) RecDep=0x00
3: Ctrl=0x41 Trk=110 (0xAA) Index=01 Start=507:27.43 ( 2283568) RecDep=0x00
MTYP: Mediumtype = (0x4305E)
Image file name: <C:\dawsons creek images\dcs1d1.nrg>
8:58:10 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using media
8:58:10 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2283567 (507:27.42, 4460MB)
8:58:10 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:58:10 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD_RW ND-2500A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
8:58:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:58:10 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) provided
original disc pos #0 + 2283568 (2283568) = #2283568/507:27.43
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283568 blocks [_NEC DVD_RW ND-2500A]
--------------------------------------------------------------
8:58:10 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD_RW ND-2500A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4676747264, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283568 | lead-out | 1 | 0x41 | 0x00
8:58:11 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:58:11 PM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:58:11 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:58:11 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
8:58:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:58:11 PM #15 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
8:58:11 PM #16 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
8:58:11 PM #17 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
8:58:11 PM #18 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:58:11 PM #19 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xD8 0x30 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
8:58:11 PM #20 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
8:58:11 PM #21 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
8:58:11 PM #22 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.70, size=17101 bytes, created 10/12/2001 5:29:42 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 23/09/2004 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 1:27:50 AM (Adapter driver for rec)
File 'Drivers\d346prt.sys': Ver=3.46.0.0 built by: WinDDK, size=5248 bytes, created 12/03/2004 10:41:42 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
17. July 2006 @ 03:38 |
Link to this message
|
|
The only thing I can suggest is to try a different brand of disc, Verbatim or Sony( made in japan)
|
|
Advertisement
|
|
|
Senior Member
|
19. August 2006 @ 13:13 |
Link to this message
|
I see something in your drivers list that is corrupted:
Quote:
File 'Drivers\atapi.sys': Ver=?.?.?.?, size=86912 bytes, created 29/08/2002 1:27:50 AM (Adapter driver for rec)
Those ???? means that file is corrupted. Try googling for atapi.sys and download that file. Some reports state this corruption is caused by XP service pack 2 having a buggy atapi.sys file. Sometimes the program Alcohol 120% locks this file and keeps it from being updated if you were installing service pack 2.
That file is the IDE driver and could be one of your problems.
Die CMC Mag!!!
|
|
