|
|
|
Nero Write Fail
|
|
|
SBullet
Newbie
|
17. July 2006 @ 15:41 |
Link to this message
|
I've just upgraded to a new computer and reinstalled Nero and everything else. I've changed the DMA setting, upgraded the drivers, and all the other things I found on this site. Still can't burn.
Any help would be much appriciated.
Here is the inof I get from Nero:
Jim
*Edit Nero ID*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <SONY DVD RW DRU-720A> Version: JY08 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SONY DVD RW DRU-720A >Version: JY08 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD800JD-75MSA3 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DRU-720A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522316kB)
Free physical memory: 100MB (102752kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.7.2006
UDF/ISO compilation
11:50:32 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:50:33 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:50:33 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:50:33 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
11:50:33 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
11:50:33 PM #6 Text 0 File Writer.cpp, Line 122
Writer SONY DVD RW DRU-720A running
11:50:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:50:33 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:50:33 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:53:22 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2196047 (488:00.47, 4289MB)
11:53:22 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
11:53:22 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: SONY DVD RW DRU-720A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193
11:53:22 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
Disc not empty. Insert empty disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
11:53:22 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2196048 (2196048) = #2196048/488:0.48
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2196048 blocks [SONY DVD RW DRU-720A]
--------------------------------------------------------------
11:53:22 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD RW DRU-720A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4497506304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2196048 | lead-out | 1 | 0x41 | 0x00
11:53:22 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:53:22 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:53:22 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:53:22 PM #19 Phase 28 File dlgbrnst.cpp, Line 1832
Speed measurement started
11:53:22 PM #20 SCSI -1080 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x03884A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x3A
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x00 0x00 0x02 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x3A 0x00
11:53:22 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:33:54 AM #22 Text 0 File WriterStatus.cpp, Line 116
<SONY DVD RW DRU-720A > start writing Lead-Out at LBA 2196048 (218250h), lenght 0 blocks
12:33:54 AM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:33:54 AM #24 Phase 29 File dlgbrnst.cpp, Line 1781
Speed measurement completed: 1.3x (1,834 KB/s)
12:33:54 AM #25 Text 0 File Burncd.cpp, Line 4188
Can only write at 4x instead of 8x,
because speed of source data is too slow
12:33:54 AM #26 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:33:54 AM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:33:54 AM #28 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
12:33:54 AM #29 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Power-Burn -> ON , Adapt writespeed to disc : ON
12:33:54 AM #30 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
12:33:54 AM #31 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:35:03 AM #32 Text 0 File Cdrdrv.cpp, Line 1288
00:35:03.859 - SONY DVD RW DRU-720A\H0 T0 : Queue again later
12:40:33 AM #33 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 0, TA 0, LUN 0, buffer 0x0B840000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x03 0xCC 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
12:40:33 AM #34 CDR -1135 File Writer.cpp, Line 311
Write error
12:40:34 AM #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:40:34 AM #36 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:40:34 AM #37 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 248863
12:40:43 AM #38 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 2:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 4/25/2005 2:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Member
|
17. July 2006 @ 16:16 |
Link to this message
|
hi there
Quote:
Physical memory : 510MB (522316kB)
Free physical memory: 100MB (102752kB)
Memory in use : 80 %
80% is a lot of memory in use. i suggest you cut down on multitasking while burning
Quote:
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
Disc not empty. Insert empty disc.
(Medium in drive: DVD-R. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
are you sure the disc is blank? if you are what kind of discs are you using? your drive doesnt seem to be recognizing them.
This message has been edited since posting. Last time this message was edited on 17. July 2006 @ 16:16
|
|
SBullet
Newbie
|
17. July 2006 @ 16:24 |
Link to this message
|
|
First disc I put in wasn't blank...second one was. I wasn't doing anything while it was burning...
|
Member
|
17. July 2006 @ 16:34 |
Link to this message
|
|
you didnt have anything open? if u didtn i suggest you check for adware/viruses as 80% is a lot for one burn process i believe tho i could be wrong.
also, what discs are you using i had a problem where my drive wouldnt burn to my 16x TDKs but worked fine with 8x Sonys. it is a diff drive tho so might not be a problem.
anyway the general suggestions are verbatim discs or sony and maxell that are made in Japan for high quality discs.
"Religion is the opium of the masses" - Karl Marx
|
Moderator
|
17. July 2006 @ 17:47 |
Link to this message
|
Hi SBullet
As Xevlys pointed out 80% is high esp if your not multitasking. Check task manager and see what's running. Anything like aol, msn, iTunes things like that running?
Quote:
CdRomPeripheral : SONY DVD RW DRU-720A atapi Port 0 ID 0 DMA: On
DiskPeripheral : Maxtor 6B120P0 atapi Port 0 ID 1 DMA: Off
2 things going on here. The hard drive (maxtor) still shows DMA as off. That could be playing into this from the log because speed of source data is too slow
Also the burner and hard drive are on the primary ide cable - with the burner set to the master and the hard drive to slave. This can sometimes cause problems.
The burner should be on a separate ide cable.
When you upgraded did they configure it this way?
|
|
SBullet
Newbie
|
17. July 2006 @ 19:06 |
Link to this message
|
|
The system came with a cd/dvd player and I swapped it out for my burner. Then I added another drive that I use just for storage of DVD temp files and such.
I'm note sure what I can change at this point as the primary drive that come with the system doesn't use a ribbon cable and my other drive and the DVD burn both use a ribbon.
|
Moderator
|
17. July 2006 @ 19:37 |
Link to this message
|
|
Is the maxtor the storage drive? The Western Digital the primary drive?
What kind of connection does the primary drive use?
|
|
SBullet
Newbie
|
18. July 2006 @ 07:25 |
Link to this message
|
|
Yes the Maxtor is the storage drive and the WD is the primary. The primary is SATA.
The primary drive (WD SATA) Is on its own cable with an option for another.
The DVD burner and the storage drive are on one EIDE cable. I belive this is the only EIDE cable.
|
Moderator
|
18. July 2006 @ 08:15 |
Link to this message
|
Ok - make sure you have the pins/setting on the drives reflect their connection on the ide cable (master to master etc). Then get the Maxtor back in DMA mode.
Here's a guide if needed:
http://forums.afterdawn.com/thread_view.cfm/260038
Keep us posted!
|
|
SBullet
Newbie
|
18. July 2006 @ 10:30 |
Link to this message
|
|
Thanks for the help, I'll get this setup tonight and let you know how it went.
|
|
SBullet
Newbie
|
20. July 2006 @ 20:11 |
Link to this message
|
|
Finally got a few disc to burn.
Binkie, good call the problem was having that drive on the same cable. So I just put the temp files on the other drive and all is well.
Thanks, really appriciate your help.
Jim
|
|
Advertisement
|
|
|
Moderator
|
20. July 2006 @ 20:28 |
Link to this message
|
|
You're welcome SBullet
Txs for posting your results!! Glad it did the trick for ya too!
Any more problems (hopefully not) just post back!
Happy Burning!
editted to add: Did you get DMA mode turned back on for the Maxtor hard drive?
This message has been edited since posting. Last time this message was edited on 20. July 2006 @ 20:57
|
|
