|
|
|
HELP!! - Did everything that I was asked to ...yet the ERROR persists!!
|
|
|
firks123
Junior Member
|
24. July 2006 @ 14:27 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9> Version: 2.FA - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MAD DOG MD-16XDVD9 >Version: 2.FA - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA765 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA765 DVD/CDRW D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047472kB)
Free physical memory: 597MB (611944kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.7.2006
UDF/ISO compilation
5:24:32 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
5:24:32 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
5:24:32 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:24:32 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
5:24:32 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
5:24:32 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:24:32 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:24:32 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
5:24:32 PM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 640607 (142:21.32, 1251MB)
5:24:32 PM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
5:24:32 PM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193
5:24:32 PM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:24:32 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 640608 (640608) = #640608/142:21.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 640608 blocks [MAD DOG MD-16XDVD9]
--------------------------------------------------------------
5:24:32 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1311965184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
640608 | lead-out | 1 | 0x41 | 0x00
5:24:32 PM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:24:32 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
5:24:32 PM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:24:32 PM #18 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 2.4x (3,324 KB/s)
5:24:32 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:24:32 PM #20 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
5:24:32 PM #21 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
5:24:32 PM #22 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
5:24:32 PM #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:24:32 PM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x09 0xC6 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
5:24:32 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
5:24:32 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
5:24:32 PM #27 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 12/8/2004 5:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Senior Member
|
24. July 2006 @ 16:01 |
Link to this message
|
|
@ firks123,
Disc Manufacturer: CMC MA - G
Did they tell u to try different media? the media u r using are not very good,
try using Verbatims
or
Made in Japan-Sonys,FujiFilm,Maxell
or
Taiyo Yudens(Online)
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
firks123
Junior Member
|
24. July 2006 @ 16:12 |
Link to this message
|
|
hmm I was asked to use TDK earlier and this is what I bought from COMPUSA.
I thought TDK is good!!
|
Senior Member
|
24. July 2006 @ 19:13 |
Link to this message
|
|
TDK is ok media but not the best, i also think that there are different types of TDK's too.
if u go and put a blank disk in and open decrypter in ISO read mode what does ur DISK ID say
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson
|
Moderator
|
24. July 2006 @ 20:13 |
Link to this message
|
|
Hi firks123
Just to add to 300bowler's good advice. TDK uses different manufacturers - most not that good.
The one's you picked up were made by one of the biggest problem causers CMC.
They can be hit or miss when it comes to burned - try another one and do a simulation again. That may fail too.
It's also probably why you receive this error: Illegal disc
Only thing really wrong in the log.
I would try and exchange the ones you bought from CompUSA for the
one's 300bowler recommended. Good stuff.
Keep us posted.
|
|
firks123
Junior Member
|
25. July 2006 @ 11:38 |
Link to this message
|
Thanks guys ...I think the problem is deeper than the Disc quality. I ran the Nero Info tool and this is what my output looks like......
If you notice none of the DVD functionality are clicked. This makes me think that I am missing some drivers or the configuration is not right.
Any inputs??
|
|
firks123
Junior Member
|
25. July 2006 @ 11:42 |
Link to this message
|
Sorry ....the link is here ..
|
|
firks123
Junior Member
|
25. July 2006 @ 11:51 |
Link to this message
|
Sorry False Alarm.
I tried burning on a different disk and here is the log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9> Version: 2.FA - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MAD DOG MD-16XDVD9 >Version: 2.FA - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA765 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA765 DVD/CDRW D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047472kB)
Free physical memory: 491MB (503760kB)
Memory in use : 51 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.7.2006
UDF/ISO compilation
2:27:13 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
2:27:13 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
2:27:13 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:27:13 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
2:27:13 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
2:27:13 PM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9 running
2:27:13 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:27:13 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:27:13 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:27:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 640607 (142:21.32, 1251MB)
2:27:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:27:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
Disc Manufacturer: AML -
Disc Application Code: 64, Disc Physical Code: 193
2:27:14 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:27:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 640608 (640608) = #640608/142:21.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 640608 blocks [MAD DOG MD-16XDVD9]
--------------------------------------------------------------
2:27:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1311965184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
640608 | lead-out | 1 | 0x41 | 0x00
2:27:14 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:27:14 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:27:14 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:27:14 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
2:27:14 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:27:14 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
2:27:14 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
2:27:14 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
2:27:14 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:27:18 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
14:27:18.897 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later
2:27:29 PM #26 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x076B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
2:27:29 PM #27 CDR -1106 File Writer.cpp, Line 311
Power calibration error
2:27:29 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:27:30 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:27:30 PM #30 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
2:27:30 PM #31 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 12/8/2004 5:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
firks123
Junior Member
|
25. July 2006 @ 12:06 |
Link to this message
|
Also I noticed in the Nero InfoTool that under
MAD DOG MD-16XDVD9 USB Device, it just shows Autorun ON and does not show DMA on.
Might that be any issue? IF yes how do I change the setting? Pls advise.
I have a built in DVD ROM and CD RW, under which it does show both DMA on and Autorun ON.
|
Moderator
|
25. July 2006 @ 16:15 |
Link to this message
|
|
@firks123
DMA mode is for your internal drives. The mad dog is an external drive transfering through a 2.0 usb port.
This time you get this error Power calibration error
One reason for this error is media and or not up to date firmware.
Your firmware is up to date the media you tried in this is iffy - AML.
You also have this - SCSI_TASTATUS_CHKCOND which leans me more to media again. Switch the media 1st. To be safe look for 8x rated media in the brands 300bowler recommends.
The brands you have tried can be hit or miss - not always reliable.
Try the different media and keep us posted!
|
|
firks123
Junior Member
|
25. July 2006 @ 20:24 |
Link to this message
|
OK I changed the media ...bought a SONY DVD -R and tried it again. Same results ....Burn Process Failed.
Gosh I am pulling out the few hair I have left on my head!!
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 9:03:20 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9> Version: 2.FA - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA765 DVD/CDRW>Version: 1.02 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA765 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA765 DVD/CDRW D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom7
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047472kB)
Free physical memory: 446MB (457616kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.7.2006
UDF/ISO compilation
11:20:40 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:20:40 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:20:40 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:20:40 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
11:20:40 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
11:20:40 PM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9 running
11:20:40 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:20:40 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:20:40 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
11:20:40 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2012991 (447:19.66, 3931MB)
11:20:40 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
11:20:40 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193
11:20:40 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:20:40 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2012992 (2012992) = #2012992/447:19.67
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2012992 blocks [MAD DOG MD-16XDVD9]
--------------------------------------------------------------
11:20:40 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4122607616, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2012992 | lead-out | 1 | 0x41 | 0x00
11:20:40 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:20:40 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
11:20:40 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:20:40 PM #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
11:20:40 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:20:40 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
11:20:40 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
11:20:40 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
11:20:40 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:20:44 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
23:20:44.569 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later
11:21:05 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x076B0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
11:21:05 PM #27 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07E61400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00
11:21:05 PM #28 CDR -1114 File Writer.cpp, Line 311
Reset occurred
11:21:05 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:21:05 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:21:05 PM #31 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
11:21:05 PM #32 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2002 8:05:10 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 12/8/2004 5:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 5:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
25. July 2006 @ 20:39 |
Link to this message
|
Dang! Ok now we have a different error - media you using is good - made by Taiyo Yuden - but looks like the 16x rated ones throw out a different error Reset occurred .
This new error is something hanging up the drive. Try a simulation again with all programs running stopped. Look in your system tray (bottom right hand side) and make sure programs running on start up are shut down also including virus, spyware, firewall (disconnect from the internet).
Do you have another 2.0 port you can use in this pc? If you have any external devices attached - disconnect them.
have you ever been able to burn w/ this burner in this laptop (think it's a laptop) & have your tried this burner in another pc?
Hopefully we can resolve this soon (need to leave some hair:)
|
|
firks123
Junior Member
|
25. July 2006 @ 20:58 |
Link to this message
|
Thanks bud!
You're right this is a Laptop and I have AV and firewall both running on my system. I also am using a USB hub o connect to the burner, external harddrive, printer and Fax. Let me try to follow what you advised and see. Keep you posted.
|
|
firks123
Junior Member
|
25. July 2006 @ 21:10 |
Link to this message
|
Blinkie!!
Simulation Worrked and I think my celebrations were premature!!! The actual burn process itself failed and generated the following log.
Darn it man ... I am really frustrated now!! What do I do pls advise.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 9:03:20 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9> Version: 2.FA - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA765 DVD/CDRW>Version: 1.02 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA765 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA765 DVD/CDRW D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047472kB)
Free physical memory: 532MB (545396kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.7.2006
UDF/ISO compilation
12:00:59 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
12:00:59 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
12:00:59 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:00:59 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
12:00:59 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
12:00:59 AM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9 running
12:00:59 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:00:59 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
12:00:59 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
12:00:59 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 640607 (142:21.32, 1251MB)
12:00:59 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
12:00:59 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193
12:00:59 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:00:59 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 640608 (640608) = #640608/142:21.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 640608 blocks [MAD DOG MD-16XDVD9]
--------------------------------------------------------------
12:00:59 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1311965184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
640608 | lead-out | 1 | 0x41 | 0x00
12:00:59 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
12:00:59 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
12:00:59 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
12:00:59 AM #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
12:00:59 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:00:59 AM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
12:00:59 AM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
12:00:59 AM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
12:00:59 AM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:01:00 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
00:01:00.212 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later
12:01:02 AM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x075B0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:01:02 AM #27 Text 0 File Cdrdrv.cpp, Line 1288
00:01:02.976 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later
12:05:11 AM #28 Text 0 File WriterStatus.cpp, Line 116
<MAD DOG MD-16XDVD9 > start writing Lead-Out at LBA 640608 (9C660h), lenght 0 blocks
12:05:11 AM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:05:11 AM #30 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 640607
12:05:26 AM #31 Phase 33 File dlgbrnst.cpp, Line 1832
Simulation completed successfully at 4x (5,540 KB/s)
12:05:27 AM #32 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
12:05:27 AM #33 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:05:27 AM #34 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
12:05:27 AM #35 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
12:05:27 AM #36 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
12:05:27 AM #37 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: CC65F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:05:27 AM #38 Text 0 File Cdrdrv.cpp, Line 1288
00:05:27.746 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later
12:05:27 AM #39 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x075B0000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
12:05:28 AM #40 SCSI -1114 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07D81800
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x06 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x29 0x00
12:05:28 AM #41 CDR -1114 File Writer.cpp, Line 311
Reset occurred
12:05:28 AM #42 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:05:28 AM #43 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
12:05:28 AM #44 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
12:05:28 AM #45 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2002 8:05:10 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 12/8/2004 5:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 5:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
26. July 2006 @ 11:12 |
Link to this message
|
Ok - may have been a step in the right direction - simualtion worked whereas it didn't before but the actually burn still fails with the reset occured
So you disconnected the other external devices right?
Did you try another usb port?
Have you ever been able to burn w/ this drive on this laptop? If so what's changed since then. Looking like a possible driver conflict.
How about another pc - does this burner work w/ Nero on another pc?
What are you trying to burn? To see if the conflict w/ Nero trying another would be a good idea. There are some free ones depending on what you are trying to burn.
Also check your aspi. Go to NeroToolKit>InfoTool>aspi tab. See if anything shows as corrupt. If you see 'no system aspi installed' that's okay - just looking here to see if you do have any & they are working properly. One you will have is Nero's.
|
|
firks123
Junior Member
|
26. July 2006 @ 12:59 |
Link to this message
|
Man you Da Man!!!
The ASPI installed is indeed Currupted! but the system ASPI is corrupted.
What are my next steps? Pls advise.
Nero InfoTool 3.02
ASPI Information
----------------
System ASPI : ASPI installation is corrupted
WNASPI32.DLL : 4.71 (0002) 45056 bytes July 16, 2002
ASPI32.SYS : 4.71 (0002) built by: WinDDK 16512 bytes July 16, 2002
Nero ASPI : ASPI is installed and working properly
|
|
firks123
Junior Member
|
26. July 2006 @ 13:31 |
Link to this message
|
Damn ... shortlived happiness yet again!!!!!!
After restoring the ASPI ..... tried Simulation.... FAILED!! :-((
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9> Version: 2.FA - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA765 DVD/CDRW>Version: 1.02 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA765 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA765 DVD/CDRW D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047472kB)
Free physical memory: 526MB (539368kB)
Memory in use : 48 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.7.2006
UDF/ISO compilation
4:22:36 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
4:22:36 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
4:22:36 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
4:22:36 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
4:22:36 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
4:22:36 PM #6 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9 running
4:22:36 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:22:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:22:36 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
4:22:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 640607 (142:21.32, 1251MB)
4:22:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
4:22:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193
4:22:36 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:22:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 640608 (640608) = #640608/142:21.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 640608 blocks [MAD DOG MD-16XDVD9]
--------------------------------------------------------------
4:22:37 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1311965184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
640608 | lead-out | 1 | 0x41 | 0x00
4:22:37 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:22:37 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
4:22:37 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:22:37 PM #19 Phase 32 File dlgbrnst.cpp, Line 1832
Simulation started at 4x (5,540 KB/s)
4:22:37 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:22:37 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
4:22:37 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
4:22:37 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
4:22:37 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:22:37 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
16:22:37.642 - MAD DOG MD-16XDVD9\H2 T0 : Queue again later
4:22:39 PM #26 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07700000
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
4:22:39 PM #27 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07E81800
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
4:22:39 PM #28 Text 0 File Mmc.cpp, Line 19440
Writer-Buffer for MAD DOG MD-16XDVD9\H2 T0 reduced to 32768Bytes
4:22:40 PM #29 SCSI -500 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x07E40200
Status: 0x02 (0x03, SCSI_ABORTED)
HA-Status 0x10 (0x0A, SCSI_HASTAT_REQUEST_SENSE_FAILED)
TA-Status 0x00 (0x00, OK)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x26
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0xF0 0x00 0x05 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x26 0x02
4:22:40 PM #30 CDR -500 File Writer.cpp, Line 311
SCSI command aborted
MAD DOG MD-16XDVD9\H2 T0
4:22:40 PM #31 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:22:40 PM #32 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:22:40 PM #33 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
4:22:41 PM #34 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
4:22:41 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
4:22:41 PM #36 Phase 34 File dlgbrnst.cpp, Line 1832
Simulation failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 12/8/2004 5:03:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 5:59:44 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
firks123
Junior Member
|
26. July 2006 @ 13:40 |
Link to this message
|
Hi! Binkie .. here are the answers to your question..
So you disconnected the other external devices right? YES
Did you try another usb port? YES
Have you ever been able to burn w/ this drive on this laptop? YES using an Apple Mac. I have never been successful burning a DVD with this one althought I have had suvccess with CD.
If so what's changed since then. Looking like a possible driver conflict.
I got a newer computer and connected the burner and all the other devices to it pretty much the same way as the previous one. I was able to burn using the previous comp. One thing I must add is that when I connected the various external devices, I used the printer CD to install the printer and the external drive CD to install it. However I have lost the MAD DOG install CD, so never used that. However when I connected it to my ocmputer it was able to recognize. It also burns CD ...but not DVD
How about another pc - does this burner work w/ Nero on another pc?
YES
What are you trying to burn? A Personal DVD that i created using DVD Shrink
To see if the conflict w/ Nero trying another would be a good idea. There are some free ones depending on what you are trying to burn.
pls advise
Also check your aspi. Go to NeroToolKit>InfoTool>aspi tab. See if anything shows as corrupt. If you see 'no system aspi installed' that's okay - just looking here to see if you do have any & they are working properly. One you will have is Nero's.
|
Moderator
|
26. July 2006 @ 13:53 |
Link to this message
|
|
|
firks123
Junior Member
|
26. July 2006 @ 14:44 |
Link to this message
|
|
Hiya Binkie .... I downloaded the Burn4Free Sowftware and was able to successfully burn the DVD on a COMPUSA disk!! However, this disk does not play in the DVD player ...says Disk Error :-(
To fix the ASPI ..
I ran dumpASPI and then instASPI.
|
|
firks123
Junior Member
|
26. July 2006 @ 16:10 |
Link to this message
|
I created the Image file...VIDEO_TS.iso and tried burning using Image Tool. I got the following error ..
I 19:05:08 ImgBurn Version 1.3.0.0 started!
I 19:05:08 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 19:05:08 Initialising SPTI...
I 19:05:08 Searching for SCSI / ATAPI devices...
I 19:05:08 Found 1 DVD-ROM/CD-RW and 1 DVD±RW!
I 19:05:44 Operation Started!
I 19:05:44 Source File: C:\Documents and Settings\Administrator\Desktop\New Folder\VIDEO_TS.iso
I 19:05:44 Source File Sectors: 640,497 (MODE1/2048)
I 19:05:44 Source File Size: 1,311,737,856 bytes
I 19:05:44 Source File Volume Identifier: NEW_FOLDER
I 19:05:44 Source File Application Identifier: MKISOFS ISO 9660/HFS FILESYSTEM BUILDER & CDRECORD CD-R/DVD CREATOR (C) 1993 E.YOUNGDALE (C) 1997 J.PEARSON/J.SCHILLING
I 19:05:44 Source File Implementation Identifier: mkisofs
I 19:05:44 Source File UDF Revision: 1.02
I 19:05:44 Destination Device: [0:0:0] MAD DOG MD-16XDVD9 2.FA (E:) (USB)
I 19:05:44 Destination Media Type: DVD-R (Disc ID: AML) (Speeds: 2x, 4x)
I 19:05:44 Destination Media Sectors: 2,298,496
I 19:05:44 Write Mode: DVD
I 19:05:44 Write Type: DAO
I 19:05:44 Write Speed: MAX
I 19:05:44 Link Size: Auto
I 19:05:44 Test Mode: No
I 19:05:44 BURN-Proof: Enabled
I 19:05:44 Filling Buffer...
I 19:05:48 Writing LeadIn...
W 19:05:50 Failed to Write Sectors 0 - 31 - The semaphore timeout period has expired.
W 19:05:50 Retrying (1 of 20)...
W 19:05:51 Retry Failed - The semaphore timeout period has expired.
W 19:05:51 Retrying (2 of 20)...
W 19:05:51 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 19:05:51 Retrying (3 of 20)...
W 19:05:54 Retry Failed - The semaphore timeout period has expired.
W 19:05:54 Retrying (4 of 20)...
W 19:05:54 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 19:05:54 Retrying (5 of 20)...
W 19:05:55 Retry Failed - The semaphore timeout period has expired.
W 19:05:55 Retrying (6 of 20)...
W 19:05:59 Retry Failed - The semaphore timeout period has expired.
W 19:05:59 Retrying (7 of 20)...
W 19:05:59 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 19:05:59 Retrying (8 of 20)...
W 19:06:00 Retry Failed - The semaphore timeout period has expired.
W 19:06:00 Retrying (9 of 20)...
W 19:06:00 Retry Failed - The semaphore timeout period has expired.
W 19:06:00 Retrying (10 of 20)...
W 19:06:02 Retry Failed - The semaphore timeout period has expired.
W 19:06:02 Retrying (11 of 20)...
W 19:06:02 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 19:06:02 Retrying (12 of 20)...
W 19:06:03 Retry Failed - The semaphore timeout period has expired.
W 19:06:03 Retrying (13 of 20)...
W 19:06:03 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 19:06:03 Retrying (14 of 20)...
W 19:06:07 Retry Failed - The semaphore timeout period has expired.
W 19:06:07 Retrying (15 of 20)...
W 19:06:13 Retry Failed - The semaphore timeout period has expired.
W 19:06:13 Retrying (16 of 20)...
W 19:06:13 Retry Failed - The semaphore timeout period has expired.
W 19:06:13 Retrying (17 of 20)...
W 19:06:13 Retry Failed - Power On, Reset, or Bus Device Reset Occurred
W 19:06:13 Retrying (18 of 20)...
|
AfterDawn Addict
|
26. July 2006 @ 16:28 |
Link to this message
|
(You want your video to be playable for years to come,)
Try the following simple but important solutions.
1)Use a higher quality media.
Quote:
Destination Media Type: DVD-R (Disc ID: AML) (Speeds: 2x, 4x)
The media you are using AML is about as worse as you can get .
2)Use DVD+R and booktype to dvd-rom (If possible on your setup.)
Quote:
19:05:44 Write Speed: MAX
3)Burn no more than 1/2 the maximum speed of the disc.
http://www.digitalfaq.com/media/dvdmedia.htm
The following list is in preference order. The best discs are near the top of the list. The discs at
the bottom of the list are suitable only for a landfill.
Almost flawless burns with 95-100% reliable results:
PVC = Pioneer = (-R)(-RW)
MXLRG01, MXLRG02 = Maxell = (-R) ... be aware of unbranded fakes
MCC = Mitsubishi Chemicals = (-R)<-----------------VERBATIM MY CHOICE #1
TDKG02 = TDK Corp = (-R) ... be aware of unbranded fakes
TAIYOYUDEN or YUDEN = Taiyo Yuden = (-R)<--------------FUJIFILM (made in japan) MY CHOICE #2
.........
Also using +r media and booktyping to DVD-ROM,
Will increase compatibility on older stand alone players.
Possunt Quia Posse Videntur. This message has been edited since posting. Last time this message was edited on 26. July 2006 @ 16:32
|
|
firks123
Junior Member
|
27. July 2006 @ 12:36 |
Link to this message
|
Here is a logfile after I tried burning with a high quality Disk ..
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 9/10/1999 12:06:00 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <MAD DOG MD-16XDVD9> Version: 2.FA - HA 1 TA 1 - 6.6.1.4
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <MATSHITA UJDA765 DVD/CDRW>Version: 1.02 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2080AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA UJDA765 DVD/CDRW atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA UJDA765 DVD/CDRW D: CDRom0
MAD DOG MD-16XDVD9 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047472kB)
Free physical memory: 363MB (372480kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.7.2006
UDF/ISO compilation
3:32:41 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
3:32:42 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
3:32:42 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
3:32:42 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
3:32:42 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
3:32:42 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
3:32:42 PM #7 Text 0 File Writer.cpp, Line 122
Writer MAD DOG MD-16XDVD9 running
3:32:42 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:32:42 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:32:42 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
3:33:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 640607 (142:21.32, 1251MB)
3:33:17 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO
3:33:17 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: MAD DOG MD-16XDVD9, Media type: DVD-R
Disc Manufacturer: TYG03 -
Disc Application Code: 64, Disc Physical Code: 193
3:33:17 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: Unknown. Medium required by compilation: DVD R/RW, DVD+R DL.)
3:33:17 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 640608 (640608) = #640608/142:21.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 640608 blocks [MAD DOG MD-16XDVD9]
--------------------------------------------------------------
3:33:17 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [MAD DOG MD-16XDVD9] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1311965184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
640608 | lead-out | 1 | 0x41 | 0x00
3:33:17 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:33:17 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:33:17 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
3:33:17 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
3:33:17 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
3:33:17 PM #22 Phase 32 File dlgbrnst.cpp, Line 1685
Simulation started at 2x (2,770 KB/s)
3:33:17 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:33:17 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
3:33:17 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
3:33:17 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:33:21 PM #27 Text 0 File Cdrdrv.cpp, Line 1200
15:33:21.761 - E: MAD DOG MD-16XDVD9 : Queue again later
3:33:22 PM #28 SPTI -600 File SCSIPassThrough.cpp, Line 289
E: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07430000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
3:33:22 PM #29 CDR -600 File Writer.cpp, Line 311
Device not available
E: MAD DOG MD-16XDVD9
3:33:22 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:33:22 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:33:22 PM #32 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1
3:33:22 PM #33 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
E: MAD DOG MD-16XDVD9
3:33:22 PM #34 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:33:22 PM #35 Phase 34 File dlgbrnst.cpp, Line 1685
Simulation failed at 2x (2,770 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 9:07:32 AM
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 9/10/1999 12:06:00 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.22a, size=20576 bytes, created 12/8/2004 5:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
27. July 2006 @ 14:41 |
Link to this message
|
|
|
Advertisement
|
|
|
Moderator
|
27. July 2006 @ 17:28 |
Link to this message
|
|
@firks123
Ok you had 1 somewhat successful. Now you've had 2 programs giving you bascially the same error - reset occurred
Seeing if there is a driver update for the usb controller might help.
The other thing is to see what processes are running in task manager - something maybe hanging up the burner.
Post a screen shot.
|
|
