|
|
|
Continuing problems burning
|
|
|
tcp77
Newbie
|
29. July 2006 @ 20:40 |
Link to this message
|
I posted yesterday and received some help with my dvd burning application. I've taken some steps and still having some problems. Prior to last week, I was able to burn without any issues. I ran out of DVD's and went to the store to purchase new dvd's. I was getting continual errors saying that I had a disc failure. I went to purchase a whole new set of different brand dvd's and still had problems. I posted yesterday and I was told to upgrade by firmware and to update Nero. I upgraded by firmware yesterday and upgraded to Nero 7.0 today. Now, my dvd's begin to burn but fail. I've attached the log and I'm hoping someone can help. Gwendolyn was awesome yesterday and I appreciate it, but still having some problems.
Here is my log
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.3.2
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 1 TA 3 - 7.2.3.2
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.03 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DJNA-370910 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00FRA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8525B E: CDRom0
LITE-ON DVDRW SOHW-1633S F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 36MB (37576kB)
Memory in use : 85 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.7.2006
UDF/ISO compilation
9:23:33 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
9:23:33 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
9:23:33 PM #3 Text 0 File Isodoc.cpp, Line 6427
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:23:33 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
9:23:33 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
9:23:33 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
9:23:33 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: LITE-ON DVDRW SOHW-1633S running
9:23:33 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:23:34 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:23:34 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
9:23:34 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
9:23:34 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
9:23:34 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
9:23:34 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:23:34 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [F: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
9:23:34 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
9:23:34 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:23:34 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:23:34 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
9:23:34 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
9:23:34 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
9:23:34 PM #22 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
9:23:34 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:32:16 PM #24 Text 0 File WriterStatus.cpp, Line 116
<F: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286112 (22E220h), length 0 blocks
9:32:16 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:32:16 PM #26 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 6.4x (8,832 KB/s)
9:32:16 PM #27 Text 0 File Burncd.cpp, Line 4305
Can only write at 6x instead of 8x,
because speed of source data is too slow
9:32:16 PM #28 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 6x (8,310 KB/s)
9:32:17 PM #29 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:32:17 PM #30 Text 0 File DVDR.cpp, Line 2869
Recording mode: Sequential Recording Mode
9:32:17 PM #31 Text 0 File DVDR.cpp, Line 3025
Start write address at LBA 0
DVD high compatibility mode: Yes
9:32:17 PM #32 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:32:47 PM #33 Text 0 File Cdrdrv.cpp, Line 1224
21:32:47.295 - F: LITE-ON DVDRW SOHW-1633S : Queue again later
9:32:49 PM #34 SPTI -600 File SCSIPassThrough.cpp, Line 291
F: CdRom3: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04860000: Len x10000
0x01 00 02 00 8B 00 00 00 BD BA F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 4A 61 79 53 69 6C 65
0x6E 74 42 6F 62 00 00 00 00 00 00 00 00 00 00 00
9:32:49 PM #35 CDR -600 File Writer.cpp, Line 302
Device not available
F: LITE-ON DVDRW SOHW-1633S
9:32:49 PM #36 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:32:49 PM #37 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:32:49 PM #38 Text 0 File DVDR.cpp, Line 3265
EndDAO: Last written address was 31
9:35:57 PM #39 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
tcp77
Newbie
|
29. July 2006 @ 22:11 |
Link to this message
|
I also just ran the Nero clean tool and reinstalled Nero 7.0. Still having the same problem with Nero. Like I said it worked a week ago. Any help would be appreciated... Here is my new log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.3.2
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 1 TA 1 - 7.2.3.2
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.03 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DJNA-370910 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00FRA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8525B E: CDRom0
LITE-ON DVDRW SOHW-1633S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 255MB (261616kB)
Free physical memory: 81MB (83472kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.7.2006
UDF/ISO compilation
10:50:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
10:50:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
10:50:47 PM #3 Text 0 File Isodoc.cpp, Line 6427
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:50:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
10:50:47 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
10:50:47 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
10:50:47 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: LITE-ON DVDRW SOHW-1633S running
10:50:47 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:50:48 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:50:48 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
10:50:48 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
10:50:48 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
10:50:48 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
10:50:48 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:50:48 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [F: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
10:50:48 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
10:50:48 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:50:48 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:50:48 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
10:50:48 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
10:50:48 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
10:50:48 PM #22 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
10:50:48 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:59:23 PM #24 Text 0 File WriterStatus.cpp, Line 116
<F: LITE-ON DVDRW SOHW-1633S> start writing Lead-Out at LBA 2286112 (22E220h), length 0 blocks
10:59:23 PM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:59:23 PM #26 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 6.4x (8,964 KB/s)
10:59:23 PM #27 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 6x (8,310 KB/s)
10:59:23 PM #28 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:59:23 PM #29 Text 0 File DVDR.cpp, Line 2869
Recording mode: Sequential Recording Mode
10:59:23 PM #30 Text 0 File DVDR.cpp, Line 3025
Start write address at LBA 0
DVD high compatibility mode: Yes
10:59:23 PM #31 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:59:48 PM #32 Text 0 File Cdrdrv.cpp, Line 1224
22:59:48.837 - F: LITE-ON DVDRW SOHW-1633S : Queue again later
10:59:54 PM #33 SPTI -600 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x08a10000: Len x10000
0x01 00 02 00 D9 00 00 00 6E 57 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 4A 61 79 53 69 6C 65
0x6E 74 42 6F 62 00 00 00 00 00 00 00 00 00 00 00
10:59:54 PM #34 CDR -600 File Writer.cpp, Line 302
Device not available
F: LITE-ON DVDRW SOHW-1633S
10:59:54 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:59:54 PM #36 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:59:54 PM #37 Text 0 File DVDR.cpp, Line 3265
EndDAO: Last written address was 31
11:02:59 PM #38 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 6x (8,310 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
30. July 2006 @ 00:57 |
Link to this message
|
I personally do NOT recommend Nero 7.2.3.2 as it is in my opinion "buggy". My recommendation is to uninstall it, run this clean tool http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html
and then install this more stable version of Nero 7.0.8.2 from here
http://www.filehippo.com/download_nero_7_premium/?845 Nero7.2.0.3/7.2.0.3b are also "buggy"
Quote:
Physical memory : 255MB (261616kB)
Free physical memory: 36MB (37576kB)
Memory in use : 85 %
You still need to look at increasing your Ram to 512 meg
Quote:
Disc Manufacturer: RITEKF - 1
You are still using the same discs.
Quote:
Burn process failed at 6x (8,310 KB/s)
Slow burn to 4X
You could have updated to 6.6.0.18 without any $$$$ outlay
This message has been edited since posting. Last time this message was edited on 30. July 2006 @ 00:58
|
|
laddyboy
AfterDawn Addict
|
30. July 2006 @ 08:42 |
Link to this message
|
Hi.
Jumping in.
10:59:54 PM #34 CDR -600 File Writer.cpp, Line 302
Device not available
F: LITE-ON DVDRW SOHW-1633S
I think there might be a communication problem between the burner and the computer causing a problem. Change USB2 cables if you have a spare.
Also try creating an ISO file of your project and burn that with either DVD Decrypter or ImgBurn. That will tell us whether the burner is working and whether the problem concerns Nero. I've had burners in external enclosures that will not work with Nero at all yet work fine with other programs.
If you're using DVD Shrink to create a project, after selecting Backup!, in the Select Target Backup: choose the Create ISO Image File option. If you already have a folder of video files, open that folder in Shrink, click the Backup! button, and choose the Create ISO Image File option.
http://www.filehippo.com/download_dvdshrink/
http://www.filehippo.com/download_dvd_decrypter/
http://www.imgburn.com
To burn an ISO in DVD Decrypter set the Mode(menu) to ISO > Write, seelct the ISO file as the source and the DVD burner as the Destination, select the write speed, and click the hard drive icon at the bottom to start the burn.
To burn the ISO with ImgBurn, set the Mode to Write, select the ISO file as the source and the DVD burner as the destination, set th write speed, and burn.
If the above fails, try the drive on another computer system and verify it works OK there. It could just be related to the software on your computer.
Edit: Added
If you're using Shrink you need to set the Target Output Size to Custom and enter 4350 or 4400 in the MB size box to avoid burning too close to the outer edge of the disk.
Edit menu > Preferences... > Preferences tab > Target DVD size > Custom
This is the case for any authoring program as well.
This message has been edited since posting. Last time this message was edited on 30. July 2006 @ 08:45
|
|
tcp77
Newbie
|
30. July 2006 @ 16:11 |
Link to this message
|
|
Thank you both for your suggestions. I'm at work tonight, but I'll give both ideas a try and let you know what happens. I appreciate the helpful advise.
|
|
tcp77
Newbie
|
31. July 2006 @ 15:55 |
Link to this message
|
Well...some success.. I was able to get an ISO image to burn using DVD Decyrpter. I am still having Nero Issues. I've cleaned and then reinstalled the version suggested by Gwendolyn. I have also ordered an additional 256K of RAM, but have to wait. Have tried 2 different brand names of discs, and still nothing (at least not with Nero.) Here is my latest log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 7.0.8.2
Internal Version: 7, 0, 8, 2
Recorder: <LITE-ON DVDRW SOHW-1633S>Version: BS0Y - HA 1 TA 1 - 7.0.8.2
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-RW GCE-8525B >Version: 1.03 - HA 1 TA 0 - 7.0.8.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IBM-DJNA-370910 atapi Port 0 ID 0 DMA: On
DiskPeripheral : WDC WD800BB-00FRA0 atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8525B atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST CD-RW GCE-8525B E: CDRom0
LITE-ON DVDRW SOHW-1633S F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 255MB (261620kB)
Free physical memory: 95MB (98192kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
31.7.2006
UDF/ISO compilation
3:44:09 PM #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
3:44:10 PM #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
3:44:10 PM #3 Text 0 File Isodoc.cpp, Line 6423
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:44:10 PM #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
3:44:10 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
3:44:10 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
3:44:10 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: LITE-ON DVDRW SOHW-1633S running
3:44:10 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:44:10 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:44:10 PM #10 Text 0 File Burncd.cpp, Line 3353
Turn on Disc-At-Once, using DVD media
3:44:11 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
3:44:11 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
3:44:11 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVDRW SOHW-1633S, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
3:44:11 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:44:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [F: LITE-ON DVDRW SOHW-1633S]
--------------------------------------------------------------
3:44:11 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: LITE-ON DVDRW SOHW-1633S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
3:44:11 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:44:11 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:44:11 PM #19 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
3:44:11 PM #20 Text 0 File Burncd.cpp, Line 4187
Cache writing successful.
3:44:11 PM #21 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
3:44:11 PM #22 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
3:44:11 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:44:11 PM #24 Text 0 File DVDR.cpp, Line 2760
Recording mode: Sequential Recording Mode
3:44:11 PM #25 Text 0 File DVDR.cpp, Line 2916
Start write address at LBA 0
DVD high compatibility mode: Yes
3:44:11 PM #26 Text 0 File Cdrdrv.cpp, Line 8661
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
3:44:39 PM #27 Text 0 File Cdrdrv.cpp, Line 1211
15:44:39.036 - F: LITE-ON DVDRW SOHW-1633S : Queue again later
3:44:58 PM #28 SPTI -600 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x07ec0000: Len x10000
0x01 00 02 00 33 00 00 00 B9 66 F0 01 20 00 00 00
0x00 00 00 00 00 00 00 00 08 4A 61 79 53 69 6C 65
0x6E 74 42 6F 62 00 00 00 00 00 00 00 00 00 00 00
3:44:58 PM #29 CDR -600 File Writer.cpp, Line 302
Device not available
F: LITE-ON DVDRW SOHW-1633S
3:44:58 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:44:58 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:44:58 PM #32 Text 0 File DVDR.cpp, Line 3156
EndDAO: Last written address was 31
3:45:45 PM #33 SPTI -600 File SCSIPassThrough.cpp, Line 290
F: CdRom1: SCSIStatus(x00) WinError(121) NeroError(-600)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x5A 00 05 00 00 00 00 00 48 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x0347a800: Len x48
3:45:45 PM #34 CDR -1114 File WriterStatus.cpp, Line 167
Reset occurred
F: LITE-ON DVDRW SOHW-1633S
3:45:45 PM #35 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:45:46 PM #36 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
laddyboy
AfterDawn Addict
|
31. July 2006 @ 16:14 |
Link to this message
|
The problem seems to be that Nero is not communicating with the external burner. I don't know if it's a communication bridging problem, a bad cable, whatever. I've had this problem before and ended up having to put my burner in a different external enclosure to get it to work with Nero. It's actually one of the reasons I avoid using Nero. One of the larger threads here used to be problems with external enclosures and Nero. Is this an OEM external or did you put an internal burner in an external enclosure yourself?
If I were you I would just burn with DVD Decrypter or ImgBurn. You can still use Nero for conversions or other projects, just use the Image Recorder as the output device and create a Nero nrg image file. Both Decrypter and Imgburn will accept that as an ISO file to burn.
Most other authoring programs will either generate a folder of video VOB files or ISO image files. Either Folder2ISO or DVD Shrink can be used to create an ISO file from the folder of VOB files. DVD Shrink can also take a folder of VOB files as input and burn directly to DVD Decrypter (or ImgBurn).
|
|
Advertisement
|
|
|
|
tcp77
Newbie
|
1. August 2006 @ 23:20 |
Link to this message
|
I'm pretty happy that I've at least got the burner to work with DVD Decrypter, so I think I'm gonna email Nero to see if they will refund my money. Dont know if it will work but it seems to be that their software is the only one that doesn't work.
|
|
