|
|
|
Nero Burn Process Failed, but dvd still works.
|
|
|
waxycloth
Newbie
|
3. August 2006 @ 01:32 |
Link to this message
|
Hi,
I was making DVDs using Nero all the time. Suddendly the past couple of burns have ended with "burn process failed".
The first time this happened, I found out that the disk had not been finalised, and I had less the 2mb left on the disk, so I could not finalise it.
I tried to burn another disk. This one also said burn process failed. But when i looked at the disk with the Nero InfoTool it said that the dvd was fine, and it looked like it should be working fine.
I put it into a dvd player, but it dosen't recognise the disk, where as normally, with the other disks it has.
But when it put it back into the PC I am able to play the DVD again.
Does anybody know why it plays in the PC but not dvd players.
Thanks
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
3. August 2006 @ 02:23 |
Link to this message
|
Have you changed your brand of discs, or have you changed your disc format, such as gone from +R to -R or vice versa.
Also if the burn process has failed, post a Nero log, located here.
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx
|
|
waxycloth
Newbie
|
3. August 2006 @ 02:35 |
Link to this message
|
No the disk are still the same, out of the same packet.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.2.3.2
Internal Version: 7, 2, 3, 2
Recorder: <PHILIPS DVDR1628P1> Version: Q2.3 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS DVDR1628P1 >Version: Q2.3 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-75JHC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR1628P1 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVDR1628P1 D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 84MB (86568kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2006
UDF compilation
1:38:47 AM #1 Text 0 File Isodoc.cpp, Line 6427
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
1:38:47 AM #2 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
1:38:47 AM #3 Text 0 File Reader.cpp, Line 124
Reader running
1:38:47 AM #4 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
1:38:55 AM #5 Phase 41 File dlgbrnst.cpp, Line 1730
Compilation will not fit onto a blank disc
1:39:07 AM #6 Text 0 File DlgWaitCD.cpp, Line 289
Unfortunately your multisession disc is now full. The remaining
free space of 0 MB on this disc is insufficient to write your
data of 2 MB.
Therefore this multisession backup cannot be
continued.
1:39:07 AM #7 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
1:39:11 AM #8 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVDR1628P1, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
1:39:11 AM #9 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/11/2005 11:28:13 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
1C80-0000-19E5-MA2X-4004-5827-3394
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 7.0.5.6
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\NeroVision
Internal Version: 7, 2, 3, 2
Recorder: <PHILIPS DVDR1628P1> Version: Q2.3 - HA 1 TA 0 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-75JHC0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVDR1628P1 atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : SAMSUNG CD-R/RW SW-252S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVDR1628P1 D: CDRom0
SAMSUNG CD-R/RW SW-252S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 254MB (260096kB)
Free physical memory: 94MB (96760kB)
Memory in use : 62
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2006
NeroAPI
06:33:03 #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
06:33:03 #2 Text 0 File Reader.cpp, Line 124
Reader running
06:33:03 #3 Text 0 File Writer.cpp, Line 113
Writer D: PHILIPS DVDR1628P1 running
06:33:03 #4 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
06:33:04 #5 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
06:33:04 #6 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
06:33:04 #7 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3748511 (833:00.11, 7321MB)
06:33:04 #8 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO (enabled: CD)
06:33:04 #9 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: PHILIPS DVDR1628P1, Media type: DVD+R9 Double Layer
06:33:04 #10 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
06:33:04 #11 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3748512 (3748512) = #3748512/833:0.12
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3748512 blocks [D: PHILIPS DVDR1628P1]
--------------------------------------------------------------
06:33:04 #12 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [D: PHILIPS DVDR1628P1] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 7676952576, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3748512 | lead-out | 1 | 0x41 | 0x00
06:33:04 #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
06:33:04 #14 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
06:33:05 #15 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
06:33:05 #16 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
06:33:05 #17 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
06:33:05 #18 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
06:33:05 #19 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
06:33:05 #20 SPTI -1066 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x0dcf8400: Len x804
06:33:05 #21 Text 0 File DVDPlusDualLayer.cpp, Line 635
L0 Data Zone Capacity set to 2086912 (1FD800h, 4076MB) -> OK, confirmed setting
06:33:05 #22 CDR -1205 File DVDPlusDualLayer.cpp, Line 662
Burning Layer 1
06:33:05 #23 Text 0 File DVDPlusDualLayer.cpp, Line 672
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
06:33:05 #24 SPTI -1066 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x0dcf8400: Len x804
06:33:05 #25 Text 0 File DVDR.cpp, Line 6736
Drive: PHILIPS DVDR1628P1
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
06:33:05 #26 CDR -1207 File DVDR.cpp, Line 5871
Book Type automatically set to: DVD-ROM
06:33:05 #27 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
06:56:25 #28 SPTI -1135 File SCSIPassThrough.cpp, Line 291
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 1E C8 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 12 00 00 00 00 0C
Buffer x02f10000: Len x10000
0x00 00 01 BA 44 D6 FC EE A4 41 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 00 28 CA 49 E0 61 58 70 0A 43
0x53 CF 1F 00 3E 01 D9 48 21 A7 13 76 02 E1 0C C1
06:56:25 #29 CDR -1135 File Writer.cpp, Line 302
Write error
D: PHILIPS DVDR1628P1
06:56:25 #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
06:56:25 #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
06:57:23 #32 Text 0 File DVDR.cpp, Line 6736
Drive: PHILIPS DVDR1628P1
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
06:57:23 #33 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 23:28:13 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
AfterDawn Addict
|
3. August 2006 @ 02:50 |
Link to this message
|
So that I could comment on 7.2.3.2b, I tried it to burn 3 AVI flies which I had successfully burned using version 7.0.8.2, sadly each burn was unsatisfactory so I reverted to 7.0.8.2, tried them again with success?my conclusion..7.2.3.2b was a failure when it comes to burn AVI files.
I did the following, uninstalled 7.2.3.2b, ran this clean tool
http://ww2.nero.com/nero7/enu/Nero7_CleanTool.html and then installed 7.0.8.2 from here
http://www.filehippo.com/download_nero_7_premium/?845
Quote:
Physical memory : 254MB (260096kB)
Free physical memory: 84MB (86568kB)
Memory in use : 66
It is recommended to have a minimum of 512meg RAM for burning, I would consider adding a further 256meg.
Quote:
====== *** Nero Burning ROM, History File *** ======
1C80-0000-19E5-MA2X-4004-xxxx xxxx
Edit out your serial number.
Quote:
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Not top quality discs, try Verbatim or Sony (made in japan)
Quote:
CdRomPeripheral : PHILIPS DVDR1628P1 atapi Port 1 ID 0 DMA: Off
In your second log your DMA is off, it needs to be on, heres aguide to turn on
http://forums.afterdawn.com/thread_view.cfm/260038
|
|
Advertisement
|
|
|
|
waxycloth
Newbie
|
3. August 2006 @ 16:22 |
Link to this message
|
|
Thanks for the help. I will try this out.
|
|
