|
|
|
Nero cannot burn to Sony 16X DVD-R
|
|
|
westside1
Newbie
|
3. August 2006 @ 05:32 |
Link to this message
|
LiteOn 1693S, Nero 6.6.1.4, NeroVExpress 3.1.0.25 (all latest)
I've been burning to Fuji 8X DVD-R for about a year with no problems, then bought some Sony 16X DVD-R and it did work the first 2 times out of 4 then failed several attempts later with error messages of
Invalid field in command
Could not perform fixation
Burn process failed.
then I upgraded firmware on Liteon from KS04 to KSOB but getting
"drive not ready"
"could not perform Endtrack"
then upgraded to NVE 3.1.0.25 and got
"PMA update failure" in addition to the other msgs
then applied SMCPatch.exe from Nero after googling this issue.
then got "reset occurred" after an attempt. The caching is always fine , just that the drive cannot burn..
Media should not be an issue, it is Sony 16X . I have recorded fine on my standalone panasonic dvd recorder.
any ideas? I'll post the log if I can find it.
This message has been edited since posting. Last time this message was edited on 3. August 2006 @ 05:35
|
|
Advertisement
|
|
|
|
|
laddyboy
AfterDawn Addict
|
3. August 2006 @ 06:06 |
Link to this message
|
Hi:
The History log is in this path:
C:\ > Program Files > Ahead > Nero > NeroHistory
The file/log is divided into sections, one for each of the last several uses. Each section begins thusly:
====== *** Nero-Burning Rom, History File *** ======
possibly your name
your program serial number
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004
Be sure to omit your name and serial number before posting.
Posting the last section if it deals with this problem will suffice.
Check to see whether your system's DMA (Direct Memory Access) transfer mode is on using the following guide:
http://home.comcast.net/~bbmayo/checking%20DMA.pdf
Nero version 6.6.1.4 isn't the best version. It has some issues of its own. We recommend using version 6.6.0.18. To downgrade, first write down your program serial number and then download the Nero 6 Clean Tool and run it to uninstall the current version of Nero:
http://ww2.nero.com/nero6/us/Nero_6_CleanTool.html
Version 6.6.0.18 is available here:
Package 1: http://httpdl1.usw.nero.com/software/Nero6/Nero-6.6.0.18_no_yt.exe
Package 2: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
The errors you note are very common when the burner and the media do not like one another. It could also be a problem with the burner or a problem with Nero, or a few other things.
To eliminate the burner as the cause, if you are using NeroVision Express, choose the Image Recorder as the "burning" device and create an ISO image file (Nero calls it an nrg file--same difference). Then try burning that created ISO file with DVD Decrypter or ImgBurn (both free). Also use different media than the Sony 16X.
http://www.imgburn.com/
http://www.filehippo.com/download_dvd_decrypter/
If creating the ISO and burning as described above work, the problem then likely rests with the media or Nero.
|
|
westside1
Newbie
|
3. August 2006 @ 06:30 |
Link to this message
|
thanks laddy for the detailed and helpful answer. found the log as you stated...
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2002 9:03:20 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <LITE-ON DVDRW SOHW-1693S>Version: KS0B - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y060P0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : FUJITSU MPD3043AT atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SOHW-1693S atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SOHW-1693S D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 410MB (420728kB)
Memory in use : 19
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2006
===== Disc-Copy over image - 1st step : Copy to image ...
7:25:28 AM #1 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:25:28 AM #2 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:25:28 AM #3 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 192KB of Memory
7:25:28 AM #4 Text 0 File Reader.cpp, Line 124
Reader running
7:25:28 AM #5 Text 0 File Writer.cpp, Line 122
Writer Image Recorder running
7:25:28 AM #6 Text 0 File DVDCopy.cpp, Line 292
DVD Track-Information from source disc:
Media Type: DVD-R
S01 T01 Con 0x14 Start 0 Len 2544 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T02 Con 0x14 Start 2560 Len 240 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T03 Con 0x14 Start 2816 Len 1759408 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T04 Con 0x14 Start 1762240 Len 48 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
S01 T05 Con 0x14 Start 1762304 Len 16 (gap 16) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
7:25:28 AM #7 Text 0 File DVDCopy.cpp, Line 405
Max -1 tracks of 5 allowed to copy
1: 0 - 2544 = 2544, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
2: 2560 - 2800 = 240, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
3: 2816 - 1762224 = 1759408, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
4: 1762240 - 1762288 = 48, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
5: 1762304 - 1762320 = 16, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
7:25:29 AM #8 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using DVD-R/RW media
7:25:29 AM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2621439 (582:32.39, 5119MB)
Last address to be written: 1762319 (391:37.44, 3442MB)
7:25:29 AM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
7:25:29 AM #11 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:25:29 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 2560 (2560) = #2560/0:34.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2560 blocks [Image Recorder]
1: TRM_DATA_MODE1 (2 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #2560 + 256 (256) = #2816/0:37.41
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 256 blocks [Image Recorder]
2: TRM_DATA_MODE1 (3 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #2816 + 1759424 (1759424) = #1762240/391:36.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1759424 blocks [Image Recorder]
3: TRM_DATA_MODE1 (4 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #1762240 + 64 (64) = #1762304/391:37.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 64 blocks [Image Recorder]
4: TRM_DATA_MODE1 (5 - Data (mode 1))
2 indices, index0 (0) not provided
original disc pos #1762304 + 16 (16) = #1762320/391:37.45
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [Image Recorder]
--------------------------------------------------------------
7:25:29 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Image Recorder] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5242880, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 5242880 5242880 5767168, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 5767168 5767168 3609067520, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 3609067520 3609067520 3609198592, ISRC ""
5: TRM_DATA_MODE1, 2048/0x00, FilePos 3609198592 3609198592 3609231360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2560 | 2 | 0 | 0x41 | 0x00
2560 | 2 | 1 | 0x41 | 0x00
2816 | 3 | 0 | 0x41 | 0x00
2816 | 3 | 1 | 0x41 | 0x00
1762240 | 4 | 0 | 0x41 | 0x00
1762240 | 4 | 1 | 0x41 | 0x00
1762304 | 5 | 0 | 0x41 | 0x00
1762304 | 5 | 1 | 0x41 | 0x00
1762320 | lead-out | 1 | 0x41 | 0x00
7:25:29 AM #14 Phase 120 File dlgbrnst.cpp, Line 1685
Creating the image for burning
7:25:29 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:25:31 AM #16 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:25:31 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 1 (not relocatable, no disc pos, no patch infos, orig at #2560): write at #2560
7:25:31 AM #18 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:25:31 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 2 (not relocatable, no disc pos, no patch infos, orig at #2816): write at #2816
7:33:38 AM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:33:39 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 3 (not relocatable, no disc pos, no patch infos, orig at #1762240): write at #1762240
7:33:40 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:33:40 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 4 (not relocatable, no disc pos, no patch infos, orig at #1762304): write at #1762304
7:33:40 AM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:33:40 AM #25 Phase 121 File dlgbrnst.cpp, Line 1685
Creating Image completed successfully
===== Disc-Copy over image - 2nd step : Burn the image ...
7:34:10 AM #1 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 72704KB of Memory
7:34:10 AM #2 Text 0 File Reader.cpp, Line 124
Reader running
7:34:10 AM #3 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1693S running
7:34:10 AM #4 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as TAO.
MTYP: Mediumtype = DVD-R/RW (0x6)
Image file name: <C:\Documents and Settings\joe\My Documents\TempImage.nrg>
7:34:11 AM #5 Text 0 File Burncd.cpp, Line 3305
Turn on Track-At-Once, using DVD-R/RW media
7:34:24 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1762319 (391:37.44, 3442MB)
7:34:24 AM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
7:34:24 AM #8 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: LITE-ON DVDRW SOHW-1693S, Media type: DVD-R
Disc Manufacturer: SONY16 - D1
Disc Application Code: 64, Disc Physical Code: 193
7:34:24 AM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:34:24 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2560 (2560) = #2560/0:34.10
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2544 blocks [LITE-ON DVDRW SOHW-1693S]
1: TRM_DATA_MODE1 (2 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2560 + 256 (256) = #2816/0:37.41
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 240 blocks [LITE-ON DVDRW SOHW-1693S]
2: TRM_DATA_MODE1 (3 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #2816 + 1759424 (1759424) = #1762240/391:36.40
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1759408 blocks [LITE-ON DVDRW SOHW-1693S]
3: TRM_DATA_MODE1 (4 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #1762240 + 64 (64) = #1762304/391:37.29
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 48 blocks [LITE-ON DVDRW SOHW-1693S]
4: TRM_DATA_MODE1 (5 - DVD-ROM)
2 indices, index0 (0) not provided
original disc pos #1762304 + 16 (16) = #1762320/391:37.45
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 16 blocks [LITE-ON DVDRW SOHW-1693S]
--------------------------------------------------------------
7:34:24 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [LITE-ON DVDRW SOHW-1693S] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 5:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5242880, ISRC ""
2: TRM_DATA_MODE1, 2048/0x00, FilePos 5242880 5242880 5767168, ISRC ""
3: TRM_DATA_MODE1, 2048/0x00, FilePos 5767168 5767168 3609067520, ISRC ""
4: TRM_DATA_MODE1, 2048/0x00, FilePos 3609067520 3609067520 3609198592, ISRC ""
5: TRM_DATA_MODE1, 2048/0x00, FilePos 3609198592 3609198592 3609231360, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2560 | 2 | 0 | 0x41 | 0x00
2560 | 2 | 1 | 0x41 | 0x00
2816 | 3 | 0 | 0x41 | 0x00
2816 | 3 | 1 | 0x41 | 0x00
1762240 | 4 | 0 | 0x41 | 0x00
1762240 | 4 | 1 | 0x41 | 0x00
1762304 | 5 | 0 | 0x41 | 0x00
1762304 | 5 | 1 | 0x41 | 0x00
1762320 | lead-out | 1 | 0x41 | 0x00
7:34:24 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 16 run-out blocks from end of track 1. Length: 2560 -> 2544.
7:34:24 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 16 run-out blocks from end of track 2. Length: 256 -> 240.
7:34:24 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 16 run-out blocks from end of track 3. Length: 1759424 -> 1759408.
7:34:24 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1127
Removed 16 run-out blocks from end of track 4. Length: 64 -> 48.
7:34:24 AM #16 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:34:24 AM #17 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:34:24 AM #18 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
7:34:24 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:34:24 AM #20 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode for Multisession
7:34:24 AM #21 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: No
7:34:24 AM #22 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:36:18 AM #23 SPTI -1114 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 20 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x030a0000: Len x10000
0x01 00 02 00 20 00 00 00 28 E4 F0 01 20 00 00 00
0x01 00 00 00 00 00 00 00 08 44 56 44 5F 56 49 44
0x45 4F 5F 52 45 43 4F 52 44 45 52 00 00 00 00 00
7:36:18 AM #24 CDR -1114 File Writer.cpp, Line 311
Reset occurred
D: LITE-ON DVDRW SOHW-1693S
7:36:18 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:36:18 AM #26 SPTI -1066 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x52 01 00 00 00 00 00 00 1C 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
Buffer x02e05400: Len x1c
7:36:18 AM #27 Text 0 File DVDMinusRW.cpp, Line 641
EndTrack 0: Last written address was 31
7:36:18 AM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 F4 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
7:36:18 AM #29 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
D: LITE-ON DVDRW SOHW-1693S
7:36:18 AM #30 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
7:36:18 AM #31 Text 0 File WriterStatus.cpp, Line 258
falling back to disc fixation
7:36:18 AM #32 SPTI -1066 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x5B 01 00 00 00 8C 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24
7:36:18 AM #33 CDR -1066 File WriterStatus.cpp, Line 249
Invalid field in command
D: LITE-ON DVDRW SOHW-1693S
7:36:18 AM #34 TRANSFER -19 File WriterStatus.cpp, Line 249
Could not perform Fixation
7:36:18 AM #35 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2002 8:05:10 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 11/17/2005 11:19:28 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 3, size=92928 bytes, created 8/27/2004 10:02:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 3, size=28672 bytes, created 8/27/2004 10:02:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 3, size=7680 bytes, created 8/27/2004 10:04:16 AM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 3. August 2006 @ 07:06
|
|
laddyboy
AfterDawn Addict
|
3. August 2006 @ 07:17 |
Link to this message
|
Here are some other problems I note.
Burn process started at 16x (22,160 KB/s)
Try burning at 8X. A good rule of thumb is to limit your burn speed to half or less the rated speed of the media to ensure a good quality burn.
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 3, size=92928 bytes, created 8/27/2004 10:02:30 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 3, size=28672 bytes, created 8/27/2004 10:02:46 AM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 3, size=7680 bytes, created 8/27/2004 10:04:16 AM (InCD4 driver for win NT/2K/XP)
InCD can be a real troublemaker at times. Unless you have a compelling need to use it, run the NeroInCD Clean Tool to uninstall it.
http://ww2.nero.com/nero6/us/InCD_CleanTool.html
Procedure to follow:
Uninstall Nero InCD.
Slow the burn speed down to 8X and try that.
If that doesn't work, use your Nero or whatever programs you use to output the project as an ISO file (nrg file in Nero speak). Burn that as described above in the other post with DVD Decrypter or ImgBurn, both of which I consider better burners than Nero anyway..
Also consider downgrading to version 6.6.0.18.
Edit: typos
This message has been edited since posting. Last time this message was edited on 3. August 2006 @ 07:18
|
|
westside1
Newbie
|
3. August 2006 @ 14:13 |
Link to this message
|
thanks laddy... My fault, I also tried it at 6X and it had failed on the attempt prior to the one shown in the log. I am going to go back to Fuji 8X DVD-R and see if it was just a matter of Liteon just not liking Sony for some reason.
|
|
Advertisement
|
|
|
AfterDawn Addict
|
3. August 2006 @ 14:24 |
Link to this message
|
Quote:
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
I suggest you do as laddyboy suggested, remove 6.6.1.4 and revert to 6.6.0.18 (after running clean tool)
|
|
