|
|
|
Problem with Samsung DVD Writer . Plz Help!!!!
|
|
|
eakzone
Newbie
|
4. August 2006 @ 00:55 |
Link to this message
|
hi guys
Im using TSSTcorp CD/DVDW Samsung SH-W162Z Writemaster(Firmware TS01) which i purchased aboout 2 months ago. I was using it without any problem and it was burning the DVDs upto the expectation. It took around 8-9 minutes to burn 4.7GB DVD. But yesterday as I finished burning the DVD on DVD-R|8x within 10 minutes as i tried to burn the next dvd it took 30 minutes. I was really surprised that how come it was taking this much of time. The blinking of the writer's green light usually blinks according to the copying speed but when it took 30 minutes to burn the light was very suspicious. It was going like blink blink stopped for a mili second then blink. Im sorry but this is how I can put my matter forward to you. My hardrive is having space of 18GB I think that wont be the problem.
Couple of hours later I tried to burn a Data CD on Sony CD-RW|4x and to make matter even worse it took 22 minutes to burn a Data CD. Im using Sony and Imation DVDs and CDs (DVD+-R 8x,16x)(DVD+RW 4x)with no problem at all. My Nero version is 6.6.0.15.
Can anyone guide me about what could be the problem. Is it with my DVD Writer.
-----Nero LOG-----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 63MB (64576kB)
Memory in use : 75
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.7.2006
CD-ROM (ISO)
5:03:18 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:03:18 PM #2 Text 0 File Burncd.cpp, Line 2946
TSSTcorp CD/DVDW SH-W162Z
Super Link activated
5:03:19 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
5:03:19 PM #4 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
5:03:19 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:03:19 PM #6 Text 0 File Burncd.cpp, Line 3231
Turn on Track-At-Once, using CD-R/RW media
5:03:20 PM #7 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 338679 ( 75:17.54)
5:03:20 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
5:03:20 PM #9 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z;
CDR code: 00 97 26 66; OSJ entry from: CMC Magnetics Corporation
ATIP Data:
Special Info [hex] 1: D0 00 98, 2: 61 1A 42 (LI 97:26.66), 3: 4F 3B 47 (LO 79:59.71)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)
5:03:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:03:20 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 338680 (338680) = #338680/75:15.55
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 338678 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
5:03:20 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 693923840, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
338680 | lead-out | 1 | 0x41 | 0x00
5:03:20 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 338680 -> 338678.
5:03:22 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:03:29 PM #15 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
5:03:29 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:03:29 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7,200 KB/s)
5:03:32 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:03:32 PM #19 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
5:05:59 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:06:09 PM #21 Text 0 File Mmc.cpp, Line 16275
<TSSTcorpCD/DVDW SH-W162Z> start Close Session
5:06:36 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 48x (7,200 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 52MB (54132kB)
Memory in use : 79
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
18.7.2006
CD-ROM (ISO)
7:19:09 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:19:09 PM #2 Text 0 File Burncd.cpp, Line 2946
TSSTcorp CD/DVDW SH-W162Z
Super Link activated
7:19:10 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
7:19:10 PM #4 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
7:19:10 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:19:10 PM #6 Text 0 File Burncd.cpp, Line 3231
Turn on Track-At-Once, using CD-R/RW media
7:19:10 PM #7 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 335974 ( 74:41.49)
Last address to be written: 59578 ( 13:16.28)
7:19:10 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
7:19:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z;
CDRW code: 00 97 22 60; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 16 3C (LI 97:22.60), 3: 4A 29 32 (LO 74:41.50)
Additional Info [hex] 1: 02 3A A0, 2: 5A A6 14, 3: 00 80 80 (invalid)
7:19:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:19:10 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 59579 (59579) = #59579/13:14.29
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 59577 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
7:19:10 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 122324992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
59579 | lead-out | 1 | 0x41 | 0x00
7:19:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 59579 -> 59577.
7:19:10 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:19:11 PM #15 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
7:19:11 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:19:11 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
7:19:11 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:19:11 PM #19 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
7:22:43 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:22:49 PM #21 Text 0 File Mmc.cpp, Line 16275
<TSSTcorpCD/DVDW SH-W162Z> start Close Session
7:24:14 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (600 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 39MB (40812kB)
Memory in use : 84
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.7.2006
CD-ROM (ISO)
5:12:48 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:12:48 PM #2 Text 0 File Burncd.cpp, Line 2946
TSSTcorp CD/DVDW SH-W162Z
Super Link activated
5:12:50 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
5:12:50 PM #4 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
5:12:50 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
5:12:50 PM #6 Text 0 File Burncd.cpp, Line 3231
Turn on Track-At-Once, using CD-R/RW media
5:12:51 PM #7 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 358025 ( 79:35.50)
5:12:51 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
5:12:51 PM #9 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z;
CDRW code: 00 97 22 60; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 16 3C (LI 97:22.60), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 3A A0, 2: 5A A6 14, 3: 00 80 80 (invalid)
5:12:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:12:51 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358026 (358026) = #358026/79:33.51
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358024 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
5:12:51 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 733544448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
358026 | lead-out | 1 | 0x41 | 0x00
5:12:51 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 358026 -> 358024.
5:12:52 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:12:52 PM #15 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
5:12:52 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:12:52 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
5:12:54 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:12:54 PM #19 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
5:33:08 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:33:14 PM #21 Text 0 File Mmc.cpp, Line 16275
<TSSTcorpCD/DVDW SH-W162Z> start Close Session
5:34:27 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (600 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 49MB (50908kB)
Memory in use : 80
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.8.2006
CD-ROM (ISO)
1:28:37 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:28:37 PM #2 Text 0 File Burncd.cpp, Line 2946
TSSTcorp CD/DVDW SH-W162Z
Super Link activated
1:28:37 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
1:28:37 PM #4 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
1:28:37 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:28:38 PM #6 Text 0 File Burncd.cpp, Line 3231
Turn on Track-At-Once, using CD-R/RW media
1:28:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 318311 ( 70:46.11)
1:28:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
1:28:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z;
CDRW code: 00 97 22 60; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 16 3C (LI 97:22.60), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 3A A0, 2: 5A A6 14, 3: 00 80 80 (invalid)
1:28:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:28:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 318312 (318312) = #318312/70:44.12
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 318310 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
1:28:38 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 652210176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
318312 | lead-out | 1 | 0x41 | 0x00
1:28:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 318312 -> 318310.
1:28:39 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:28:39 PM #15 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
1:28:39 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:28:39 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
1:28:39 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:28:39 PM #19 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
1:46:32 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:46:38 PM #21 Text 0 File Mmc.cpp, Line 16275
<TSSTcorpCD/DVDW SH-W162Z> start Close Session
1:48:06 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (600 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 90MB (92240kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2006
UDF/ISO compilation
11:01:22 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
11:01:22 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
11:01:22 AM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:01:22 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
11:01:23 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
11:01:23 AM #6 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
11:01:23 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:01:23 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
11:01:23 AM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
11:01:23 AM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
11:01:23 AM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
11:01:23 AM #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
11:01:23 AM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:01:23 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
11:01:23 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
11:01:24 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
11:01:24 AM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
11:01:24 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
11:01:24 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
11:01:24 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:01:24 AM #21 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
11:01:24 AM #22 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
11:01:24 AM #23 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
11:01:24 AM #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:01:40 AM #25 Text 0 File Cdrdrv.cpp, Line 1288
11:01:40.625 - TSSTcorp CD/DVDW SH-W162Z\H1 T1 : Queue again later
11:09:42 AM #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162Z> start writing Lead-Out at LBA 2286112 (22E220h), lenght 0 blocks
11:09:42 AM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:09:42 AM #28 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 2286111
11:09:58 AM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 42MB (43028kB)
Memory in use : 83
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2006
UDF/ISO compilation
4:22:19 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
4:22:19 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
4:22:19 PM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
4:22:19 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
4:22:20 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
4:22:20 PM #6 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
4:22:20 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:22:20 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:22:20 PM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
4:22:20 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286111 (508:01.36, 4465MB)
4:22:20 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
4:22:20 PM #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
4:22:20 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:22:20 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286112 (2286112) = #2286112/508:1.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286112 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
4:22:20 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681957376, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286112 | lead-out | 1 | 0x41 | 0x00
4:22:21 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:22:21 PM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
4:22:21 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:22:21 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
4:22:21 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:22:21 PM #21 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
4:22:21 PM #22 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
4:22:21 PM #23 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
4:22:21 PM #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:22:36 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
16:22:36.410 - TSSTcorp CD/DVDW SH-W162Z\H1 T1 : Queue again later
4:33:27 PM #26 Phase 40 File dlgbrnst.cpp, Line 1519
Aborted by user
4:33:28 PM #27 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 463359
4:34:00 PM #28 Phase 39 File dlgbrnst.cpp, Line 1832
Burn process aborted
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 87MB (89920kB)
Memory in use : 65
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2006
UDF/ISO compilation
7:40:20 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
7:40:21 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
7:40:21 PM #3 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:40:21 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
7:40:21 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
7:40:21 PM #6 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
7:40:21 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:40:21 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:40:21 PM #9 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
7:40:21 PM #10 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1458063 (324:00.63, 2847MB)
7:40:21 PM #11 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
7:40:21 PM #12 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
7:40:21 PM #13 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:40:21 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1458064 (1458064) = #1458064/324:0.64
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1458064 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
7:40:21 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2986115072, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1458064 | lead-out | 1 | 0x41 | 0x00
7:40:22 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:40:22 PM #17 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
7:40:22 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:40:22 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
7:40:22 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:40:22 PM #21 Text 0 File DVDR.cpp, Line 2340
Recording mode: Sequential Recording Mode
7:40:22 PM #22 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
7:40:22 PM #23 Text 0 File DVDR.cpp, Line 2494
Start write address at LBA 0
DVD high compatibility mode: Yes
7:40:22 PM #24 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 00 00 00 00 00 .0..............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:40:40 PM #25 Text 0 File Cdrdrv.cpp, Line 1288
19:40:40.843 - TSSTcorp CD/DVDW SH-W162Z\H1 T1 : Queue again later
8:13:15 PM #26 Text 0 File WriterStatus.cpp, Line 116
<TSSTcorp CD/DVDW SH-W162Z> start writing Lead-Out at LBA 1458064 (163F90h), lenght 0 blocks
8:13:15 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
8:13:15 PM #28 Text 0 File DVDR.cpp, Line 2732
EndDAO: Last written address was 1458063
8:13:39 PM #29 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 8:35:32 PM
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15e
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162Z>Version: TS01 - HA 1 TA 1 - 6.6.0.15
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <SAMSUNG DVD-ROM SD-616Q >Version: F403 - HA 1 TA 0 - 6.6.0.15
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : MAXTOR 6L040J2 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616Q atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162Z atapi Port 1 ID 1 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616Q G: CDRom0
TSSTcorp CD/DVDW SH-W162Z H: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 255MB (261408kB)
Free physical memory: 83MB (85776kB)
Memory in use : 67
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.8.2006
CD-ROM (ISO)
8:58:57 PM #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
8:58:57 PM #2 Text 0 File Burncd.cpp, Line 2946
TSSTcorp CD/DVDW SH-W162Z
Super Link activated
8:58:58 PM #3 Text 0 File Reader.cpp, Line 127
Reader running
8:58:58 PM #4 Text 0 File Writer.cpp, Line 122
Writer TSSTcorp CD/DVDW SH-W162Z running
8:58:58 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:58:58 PM #6 Text 0 File Burncd.cpp, Line 3231
Turn on Track-At-Once, using CD-R/RW media
8:58:58 PM #7 Text 0 File DlgWaitCD.cpp, Line 267
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 344530 ( 76:35.55)
8:58:58 PM #8 Text 0 File DlgWaitCD.cpp, Line 279
Write in overburning mode: NO (enabled: CD)
8:58:58 PM #9 Text 0 File DlgWaitCD.cpp, Line 2457
Recorder: TSSTcorp CD/DVDW SH-W162Z;
CDRW code: 00 97 22 60; OSJ entry from: Daxon Technology, Inc.
ATIP Data:
Special Info [hex] 1: D1 00 C6, 2: 61 16 3C (LI 97:22.60), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 02 3A A0, 2: 5A A6 14, 3: 00 80 80 (invalid)
8:58:58 PM #10 Text 0 File DlgWaitCD.cpp, Line 445
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:58:58 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 344531 (344531) = #344531/76:33.56
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 344529 blocks [TSSTcorp CD/DVDW SH-W162Z]
--------------------------------------------------------------
8:58:58 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [TSSTcorp CD/DVDW SH-W162Z] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 705906688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
344531 | lead-out | 1 | 0x41 | 0x00
8:58:58 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1111
Removed 2 run-out blocks from end of track 1. Length: 344531 -> 344529.
8:58:59 PM #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:59:01 PM #15 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
8:59:01 PM #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:59:01 PM #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (600 KB/s)
8:59:01 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:59:01 PM #19 Text 0 File Mmc.cpp, Line 21627
Set BUFE: Super Link -> ON
9:18:33 PM #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:18:39 PM #21 Text 0 File Mmc.cpp, Line 16275
<TSSTcorpCD/DVDW SH-W162Z> start Close Session
9:20:07 PM #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (600 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 6/2/2006 2:11:08 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 9:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 4. August 2006 @ 01:33
|
|
Advertisement
|
 |
|
|
|
david66
Senior Member
|
4. August 2006 @ 06:42 |
Link to this message
|
|
Two things you need more than 18gb of hard drive space also your burner has slipped into PIO Mode it should be in DMA mode this will cause slow burning open up device manager and deleate the secondary IDE controller then reboot your computer windows will reinstall the controller and the burner will go into the DMA Mode
|
|
eakzone
Newbie
|
4. August 2006 @ 07:15 |
Link to this message
|
|
thanks David for the reply.
but can u help me out from where i can delete the secondary IDE controller. Im not good at it.
|
AfterDawn Addict
|
4. August 2006 @ 07:39 |
Link to this message
|
You might also try pulling the Samsung reader and installing the TSSTcorp as master. Use Nero InfoTool to make sure DMA is enabled and ASPI is correctly installed. If you still experience problems, especially if Windows kicks off DMA again, I'd contact the manufacturer seeing as it's only 2 months old. It's best to stick to the major brands as there is always more info/troubleshooting advice available.
This message has been edited since posting. Last time this message was edited on 4. August 2006 @ 07:43
|
|
eakzone
Newbie
|
4. August 2006 @ 08:00 |
Link to this message
|
|
MysticE by going into Device Manager, selected IDE ATA/ATAPI Controllers, selected Primary IDE Channel, Properties, Advanced Settings and then setting both at 'DMA if Available'. doing the same in the Secondary IDE Channel. restarted my pc and went back to the device manager it was showing 'DMA if Available' for both channels. do you think that sorted the problem.
|
AfterDawn Addict
|
4. August 2006 @ 12:51 |
Link to this message
|
You have to look at 'Current Transfer Mode' to see what it's at. Usually clicking in Device Manager doesn't help. XP probably had some read problems with the drive and kicked it down.
You should have Nero InfoTool, look in Nero Tool Kit. Check 'Configuration' to see if it's on. Check 'ASPI' and see if it days installed properly.
http://forum.digital-digest.com/showthread.php?t=61905
|
|
eakzone
Newbie
|
5. August 2006 @ 00:08 |
Link to this message
|
Like you said MysticE I looked in Nero InfoTool/configuration all DMAs are on. In ASPI there are 2 drop down options System ASPI(shows yellow bar: ASPI is not intalled) & Nero ASPI(ASPI installed & working properly)
Here is the information after going to Device Manager
Primary Idle Channel
Device 0
Transfer Mode: DMA if Available
Current Transfer Mode: Ultra DMA Mode 5
Device 1
Device Type: Auto Detection
Transfer Mode: DMA if Available
Current Transfer Mode: Not Applicable
What does Not Applicable means?
Secondary Idle Channel
Device 0
Transfer Mode: DMA if Available
Current Transfer Mode: Ultra DMA Mode 2
Device 1
Transfer Mode: DMA if Available
Current Transfer Mode: Ultra DMA Mode 2
If I unistall the Primary Idle Channel driver will I lose my data on the ahrd drive?
This message has been edited since posting. Last time this message was edited on 5. August 2006 @ 00:43
|
AfterDawn Addict
|
5. August 2006 @ 07:25 |
Link to this message
|
|
Everything looks fine, I assume you have only one HD?
>>Primary Idle Channel
Device 0
Transfer Mode: DMA if Available
Current Transfer Mode: Ultra DMA Mode 5
Your opticals are:
>>Secondary Idle Channel
Device 0
Transfer Mode: DMA if Available
Current Transfer Mode: Ultra DMA Mode 2
Device 1
Transfer Mode: DMA if Available
Current Transfer Mode: Ultra DMA Mode 2
There is no reason to touch the Primary IDE channel.
Usually folks uninstall the secondary channel to re-enable DMA on their opticals but yours is correct. Try this, in Device Manager, right click on TSSTcorp CD/DVDW (instead of the IDE channel), and click "Uninstall". After it uninstalls, reboot, and let Windows detect new hardware and reinstall it. Maybe that will do it.
As a side note I prefer to have my burner as Master (which is recommended by some manufacturers) and my reader as the Slave.
|
|
eakzone
Newbie
|
5. August 2006 @ 09:41 |
Link to this message
|
|
do u think if by changing the writer to master that would solve the problem and will it ever change to PIO again?
|
|
david66
Senior Member
|
5. August 2006 @ 17:39 |
Link to this message
|
|
your drive should be master on seconday controller when a drive has trouble reading a disc it will go into PIO Mode
|
AfterDawn Addict
|
5. August 2006 @ 18:38 |
Link to this message
|
|
|
|
eakzone
Newbie
|
6. August 2006 @ 10:56 |
Link to this message
|
|
what is multisession?
how can I disable it???
|
|
david66
Senior Member
|
6. August 2006 @ 11:12 |
Link to this message
|
|
When you write data to a disc you have the option of closing the disc and no more data can be writen on the disc multisession allows you to add data to a disc and then more data at a later time
|
|
Advertisement
|
|
|
|
eakzone
Newbie
|
6. August 2006 @ 11:35 |
Link to this message
|
|
by disabling it would that help in reducing the burning ot writing time
This message has been edited since posting. Last time this message was edited on 6. August 2006 @ 11:46
|
|
