|
western digital
|
|
|
bojan087
Member
|
21. August 2006 @ 10:09 |
Link to this message
|
|
hey guys i just got a western digital serial ATA hard drive from my sister, its 160gb and when i connected the cables to the motherboard it told me it couldnt recognise the h/d
|
|
Advertisement
|
|
|
|
|
The_Fiend
Suspended permanently
|
21. August 2006 @ 10:21 |
Link to this message
|
|
Try downloading the newest SATA/RAID drivers for your mobo.
irc://arcor.de.eu.dal.net/wasted_hate
Wanna tell me off, go ahead.
I dare ya !
|
|
bojan087
Member
|
21. August 2006 @ 10:22 |
Link to this message
|
|
how can i when i cant even install windows on it? i could put it on another drive???
|
|
bojan087
Member
|
21. August 2006 @ 10:57 |
Link to this message
|
|
i just went into the add hardware wizard and it told me VIA SATA RAID Controller that this device cannot start (Code 10)? what does that mean
|
|
The_Fiend
Suspended permanently
|
21. August 2006 @ 11:10 |
Link to this message
|
|
Well, how was i to know you had no other HD, or an OS for that matter?
You hadn't exactly suppled much information on what kind of system you have..
As for that error code, it means it needs a driver...
Try google for "sata error code 10" without the quotation marks, you'll see what i mean...
irc://arcor.de.eu.dal.net/wasted_hate
Wanna tell me off, go ahead.
I dare ya !
|
|
bojan087
Member
|
21. August 2006 @ 11:57 |
Link to this message
|
|
i have another h/d that i am able to get online with, do u mean like install the upgrades on a floppy than boot with the floppy on the new h/d?
|
|
bojan087
Member
|
21. August 2006 @ 13:06 |
Link to this message
|
|
i have an AsRock P4V88 motherboard if that helps
|
Senior Member
|
21. August 2006 @ 13:21 |
Link to this message
|
I typed that board name into google and got their homepage.
I clicked the link for support, then chose the drivers catagory but it had a choice for board specs also to learn more about what you are using. There are SATA drivers on that page. If you are missing them you may want to upgrade BIOS conviently on same page.
http://www.asrock.com/support/download.asp?Model=P4V88%2b
This message has been edited since posting. Last time this message was edited on 21. August 2006 @ 13:24
|
|
bojan087
Member
|
21. August 2006 @ 13:42 |
Link to this message
|
|
alright thanx, ima go switch hd's right now and try them and see how they work out
|
Senior Member
|
21. August 2006 @ 13:46 |
Link to this message
|
|
No problems, just post back so we know if this helps.
|
|
bojan087
Member
|
22. August 2006 @ 11:52 |
Link to this message
|
|
when i type in the asrflash p4v88 p1.70 on the prompt screen, i get this like command section and it wasnts me to type something "A:\>_" and i duno what to say, they gave me an option but everytime i try it tells me command invalid, heres an example of whats on the screen at this time
Usage : AMITFLASH ROM_FILE /<COMMAND1>
____________________________________________________
H : Help
B : enable boot block programming
-B : disable boot block programming
C : Load CMOS defaults
G : GPNV data area reserving
N : To force NVRAM programming
Q : Update BIOS without any message
-<Options> : Disable Flags
S<File_Name> : TO save Flash ROM data into file AND quit.
__________________________________________________
A:\>_ ****now this is the part where im stuck, i dont know what command to put in there, anyhelp would be great
|
|
bojan087
Member
|
23. August 2006 @ 12:13 |
Link to this message
|
|
anybody please??????
|
Senior Member
|
23. August 2006 @ 12:28 |
Link to this message
|
|
That is the BIOS update, did you want to do the hard drive first, or that?
If you want the BIOS too, this is a floppy disc the file is on right? Can you just press Q to update? If the system works and you have a floppy disc, you should be able to setup your computer to boot from it and it should take care of itself. Never used Asrock BIOS so not totally sure how its setup. I'd say try to load that driver for SATA as the fiend suggested first (SATA driver ver:3.00b)
|
|
bojan087
Member
|
23. August 2006 @ 12:31 |
Link to this message
|
|
when i type in Q and push enter it tells me its a unknown command, but to be honest ih avent tried re/installing the harddrive ever since i did that because i thought that i didnt finish going through the update since i didnt do that command where i posted earlier, but i'll try it, im in the library right now, i'll keep u guys updated either tonight or tomorrow hopefully
|
Senior Member
|
23. August 2006 @ 12:39 |
Link to this message
|
|
So you did load the SATA driver first, you just wanted to do BIOS too?
If you loaded the driver, put the drive in and check.
If not, load driver first and put the drive in. If nogo, let us know the error prompts.
|
|
bojan087
Member
|
23. August 2006 @ 16:07 |
Link to this message
|
|
okay so today i tried a combination of things. the first thing i did was to load the card drive with the xp cd in the cd rom, and nothing happened told me to push f3 to restart my computer, than i tried to put in the floppy with the hard drive still connected with no cd, and i got to that same screen above with all those options and still nothing, than i tried a combination of the floppy/sata h/d / the xp cd and still nothing all the same stuff kept on comming up, it keeps on telling me that it cannot recognize a hard drive in the computer. so i was thinking if i should maybe set up a jumper somewhere either on the 1/2 or 5/6 i believe, cuz it has a little memo on the harddrive that if i have the jumper on it that it enables something and something else, dont have the hard drive with me at the moment, one of them was about some speed. so im running out of options here, and if i dont figure it out by the end of this week ima take the computer to a computer shop and have them take a look at it, sry for along post, thanks for those who are currently helping me out, really appriciate the time and effort
|
|
bojan087
Member
|
24. August 2006 @ 11:08 |
Link to this message
|
|
anybody?
|
|
bojan087
Member
|
24. August 2006 @ 13:59 |
Link to this message
|
|
okay so i was reading my motherboards manual, and i found out that i only needed the cd for the mother board to be able to install it, but at the end of it it told me that the mother board will load the bios on the empty floppy disk to be able to make it work, and all i needed to do was restart and install xp, but when i do that with the diskette in it tells me NTLDR is missing, so i restart the computer without a floppy disk and i still get the same problem as before, when i hit ENTER to install the xp cd, it tells me to push f3 because it cant fina a harddrive
|
|
Advertisement
|
|
|
|
bojan087
Member
|
25. August 2006 @ 14:03 |
Link to this message
|
|
isnt this the place were people help others with computer help? somebody has to know the answer to my problems...
|
