|
|
|
DVD-R Error on burn, but the DVD+R work.
|
|
|
TJBA
Newbie
|
6. October 2006 @ 00:28 |
Link to this message
|
I've used the cheapest DVD-R to burn in the past with no problem. I bought a new pack recently and it has been a nightmare ever since. I've tried three different brands of different quality on the DVD-R and no luck. The cheap DVD+R work fine.
I have updated drivers, made sure the DMA is on, updated firmware, and stood on my head.
Here's the log and any advice would be much appreciated.
Project type: Main Movie to DVD
Target size: DVD5 (2282925)
01:00:13 File LangStreamPatcher.cpp, Line 56
Command table patching started...
01:00:13 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: TDK DVDRW0404N
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Tom\My Documents\DVD (31651274752 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: true
01:00:31 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [5900 vobus] 3194.30MB -> 2133.87MB [R 0.46]
Video: 1906.84MB, extra: 227.03MB
Audio: 4 streams
0. 0. Dolby Digital 5.1-ch English 142.14MB [enabled]
1. 1. Dolby Digital 2-ch English 71.07MB [enabled]
2. 2. Dolby Digital 2-ch French 71.07MB [disabled]
3. 3. Dolby Digital 2-ch Spanish 71.07MB [disabled]
Subpicture: 3 streams
0. 0. English 2.30MB [enabled]
1. 1. French 2.45MB [disabled]
2. 2. Spanish 2.25MB [disabled]
VTS_02 Title Vobs [6528 vobus] 3409.24MB -> 2324.80MB [R 0.46]
Video: 2073.13MB, extra: 251.67MB
Audio: 4 streams
0. 0. Dolby Digital 5.1-ch English 157.26MB [enabled]
1. 1. Dolby Digital 2-ch English 78.63MB [enabled]
2. 2. Dolby Digital 2-ch French 78.63MB [disabled]
3. 3. Dolby Digital 2-ch Spanish 78.63MB [disabled]
Subpicture: 3 streams
0. 0. English 3.03MB [enabled]
1. 1. French 3.02MB [disabled]
2. 2. Spanish 2.94MB [disabled]
01:00:31 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
01:00:31 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
01:00:31 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286463 sectors (2298496)
01:00:32 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286463 sectors (2282925 required)
01:00:32 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.75MB (4465.75MB obtained)
01:00:32 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
01:00:34 File NeroRecorder.cpp, Line 448
Burn failed (3)
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.11
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1712 D: CDRom0
TDK DVDRW0404N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 217MB (222516kB)
Memory in use : 57
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
6.10.2006
NeroAPI
1:00:32 AM #1 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
1:00:32 AM #2 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
1:00:32 AM #3 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193
1:00:32 AM #4 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:00:32 AM #5 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode for Multisession
1:00:32 AM #6 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
1:00:32 AM #7 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: No
1:00:32 AM #8 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:00:32 AM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1005
Estimated filesystem size: 544
1:00:32 AM #10 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
1:00:34 AM #11 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x02 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
1:00:34 AM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 679
Error reserving fragment (0)
1:00:34 AM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
Disc info:
Partitions: 0
1:00:34 AM #14 Text 0 File BurnAtOnceRecorder.cpp, Line 1859
Error reserving start segment
1:00:34 AM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
Disc info:
Partitions: 0
1:00:34 AM #16 Phase 179 File APIProgress.cpp, Line 276
Writing file to disc failed
1:00:34 AM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 3629
Disc info:
Partitions: 0
1:00:36 AM #18 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 3/26/2003 11:20:16 AM
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
01:00:36 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
This message has been edited since posting. Last time this message was edited on 7. October 2006 @ 00:01
|
|
Advertisement
|
 |
|
|
AfterDawn Addict
|
6. October 2006 @ 04:26 |
Link to this message
|
first off edit out your serial # ....... you have it listed in 2 areas..... it starts with 1A20-****-****, hit the icon on the top of your reply that looks like a pen on paper!
3 things I noticed.....your memmory is very low.... do not multitask and better yet add more RAM! That would make a big difference!
Your media sucks, dude. Keep using the cheap stuff and sooner or later you will get caught either having trouble burning because of the inconsistancy of quality media or the burned stuff that you had success with will eventually be unreadable by your players because it's the cheap crap! sooooo you're choice.... and last but not least is that you are using version 6.6.0.18, which is the bug free and stable version of Nero 6.... which is what I use. But, why does it have this: Quote:
Using interface version: 6.6.0.11
I would save my serial #, then uninstall Nero, then use the cleaning tools:
http://ww2.nero.com/nero6/eng/Clean_Tools.html
then reinstall Nero 6.6.0.18, both packages:
first: http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
second: http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
and do not install InCD as that will cause conflict in DVD burning!
This message has been edited since posting. Last time this message was edited on 6. October 2006 @ 04:27
|
|
TJBA
Newbie
|
7. October 2006 @ 01:09 |
Link to this message
|
Thank you IHoe for you wisdom and support. Hopefully, my ignorance will not have allowed my serial number to be pirated by the masses.
I used cheap media for backing up movies that my kids use and thrash. I thought I was saving a couple of dollars for media that I knew would not last.
I have followed all of your instructions for cleaning and reloading, but I am still suffering from the same problem. As of late, I thought that I was using a higher quality media that should work, but to no avail. I can still burn with a DVD+R disc, but the DVD-R does not like it's master.
Any thoughts or ideas are much appreciated.
|
AfterDawn Addict
|
7. October 2006 @ 01:37 |
Link to this message
|
My only thoughts on this are that older burners do not have the capacity to handle the newer discs that are now being produced...I dont know how old your burner is but it's an idea.
Quote:
File 'Drivers\CDRALW2K.SYS': Ver=5.3.5.10, size=23436 bytes, created 3/26/2003 11:20:16 AM
You have Roxio installed, it clashes with Nero, to remove, run this zapper http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
|
AfterDawn Addict
|
7. October 2006 @ 03:54 |
Link to this message
|
|
that burner must be old because the latest firmware update is 2 yrs old now! soooooooo Gwendolin is correct about the newer media out there! I bet it would write with 4x media if you can find them now.
|
|
TJBA
Newbie
|
8. October 2006 @ 14:05 |
Link to this message
|
I wanted to say thank you for the advise. Since reloading Nero and removing various programs, I am not getting a different error message. I thought you might be interested in reading the new log to see if you have any other ideas. Any thoughts are greatly appreciated.
Project type: Main Movie to DVD
Target size: DVD5 (2282925)
14:13:13 File LangStreamPatcher.cpp, Line 56
Command table patching started...
14:13:13 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: TDK DVDRW0404N
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Tom\My Documents\Nero Recode (35482841088 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: false
Compress Adaptive: false
14:13:28 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VTS_01 Title Vobs [5900 vobus] 3194.30MB -> 2133.87MB [R 0.46]
Video: 1906.84MB, extra: 227.03MB
Audio: 4 streams
0. 0. Dolby Digital 5.1-ch English 142.14MB [enabled]
1. 1. Dolby Digital 2-ch English 71.07MB [enabled]
2. 2. Dolby Digital 2-ch French 71.07MB [disabled]
3. 3. Dolby Digital 2-ch Spanish 71.07MB [disabled]
Subpicture: 3 streams
0. 0. English 2.30MB [enabled]
1. 1. French 2.45MB [disabled]
2. 2. Spanish 2.25MB [disabled]
VTS_02 Title Vobs [6528 vobus] 3409.24MB -> 2324.80MB [R 0.46]
Video: 2073.13MB, extra: 251.67MB
Audio: 4 streams
0. 0. Dolby Digital 5.1-ch English 157.26MB [enabled]
1. 1. Dolby Digital 2-ch English 78.63MB [enabled]
2. 2. Dolby Digital 2-ch French 78.63MB [disabled]
3. 3. Dolby Digital 2-ch Spanish 78.63MB [disabled]
Subpicture: 3 streams
0. 0. English 3.03MB [enabled]
1. 1. French 3.02MB [disabled]
2. 2. Spanish 2.94MB [disabled]
14:13:28 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
14:13:28 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD-R
14:13:29 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2286463 sectors (2298496)
14:13:29 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2286463 sectors (2282925 required)
14:13:29 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4465.75MB (4465.75MB obtained)
14:13:29 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
14:16:25 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_2.VOB
14:19:08 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 3194.30MB -> Expected 2137.31MB -> Output 2137.30MB
Finished error -0.00MB
Ratio encoded = 5898
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 227.03MB
Source video size = 2820.43MB
Pictures Modified [I 5446] [P 2140] [B 47710]
14:19:08 File NeroRecorder.cpp, Line 593
Added extra file VTS_01_3.VOB
14:21:49 File NeroRecorder.cpp, Line 593
Added extra file VTS_02_2.VOB
14:24:04 File NeroRecorder.cpp, Line 593
Added extra file VTS_02_3.VOB
14:24:27 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Title Vobs
VTS_02 Title Vobs:
Original 3409.24MB -> Expected 2328.27MB -> Output 2328.27MB
Finished error -0.00MB
Ratio encoded = 6527
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 251.67MB
Source video size = 2994.35MB
Pictures Modified [I 6354] [P 3045] [B 52707]
14:24:29 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (4465.75MB)
14:24:29 File NeroRecorderBase.cpp, Line 1096
Burning 12 files with total size of 4682674176 bytes on hard disk
14:24:29 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 18e
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST380011A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1712 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TDK DVDRW0404N atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-M1712 D: CDRom0
TDK DVDRW0404N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522988kB)
Free physical memory: 182MB (186952kB)
Memory in use : 64
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.10.2006
NeroAPI
2:24:29 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:24:30 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:24:30 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:24:30 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
2:24:30 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:24:30 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:24:30 PM #7 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:24:30 PM #8 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2287007 (508:13.32, 4466MB)
2:24:30 PM #9 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
2:24:30 PM #10 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: Prodis - cF02
Disc Application Code: 64, Disc Physical Code: 193
2:24:30 PM #11 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:24:30 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2287008 (2287008) = #2287008/508:13.33
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2287008 blocks [TDK DVDRW0404N]
--------------------------------------------------------------
2:24:30 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [TDK DVDRW0404N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4683792384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2287008 | lead-out | 1 | 0x41 | 0x00
2:24:30 PM #14 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:24:30 PM #15 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:24:30 PM #16 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:24:30 PM #17 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
2:24:30 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:24:30 PM #19 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
2:24:30 PM #20 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON
2:24:30 PM #21 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
2:24:30 PM #22 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:24:30 PM #23 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0xE5 0xA0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
2:24:30 PM #24 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
2:24:30 PM #25 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
2:24:30 PM #26 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
14:24:32 File NeroRecorderBase.cpp, Line 906
Burn failed (3)
14:24:32 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
AfterDawn Addict
|
8. October 2006 @ 14:18 |
Link to this message
|
Quote:
Disc Manufacturer: Prodis - cF02
These are poor quality discs, try Verbatim or Sony (made in japan}
|
|
Advertisement
|
|
|
AfterDawn Addict
|
8. October 2006 @ 14:51 |
Link to this message
|
Quote:
2:24:30 PM #24 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc[
it just doesn't like your disk...... Gwendolin is correct! Verbatim is the only Made In Taiwan disk that I would use, but I use Made in Japan disks mostly! make sure you look on the lable of the spindle or box and it say MIJ!
|
|
