illegal disc problem with burning DVD

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Monday 2.3.2026 / 07:28

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > illegal disc problem with burning dvd

Browse by topic

Forums

Start a new thread

illegal disc problem with burning DVD

Jump to:

Posted

Message

abdgismo

Newbie

10. October 2006 @ 05:30

Link to this message

Hello guys

I have some problems when I burn memorex DVD with Nero. It says illegal disc and could not perform start of Disc-at-once.

Thx alot for your helps.

There is log file.
-------------------

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 302MB (309612kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
13:43:45 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

13:43:45 #2 Text 0 File Reader.cpp, Line 127
Reader running

13:43:45 #3 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD_RW ND-2510A running

13:43:46 #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

13:43:46 #5 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

13:43:46 #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2143823 (476:24.23, 4187MB)

13:43:46 #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

13:43:46 #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: RITEKG - 05
Disc Application Code: 64, Disc Physical Code: 193

13:43:46 #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

13:43:46 #10 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2143824 (2143824) = #2143824/476:24.24
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2143824 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

13:43:48 #11 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4390551552, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2143824 | lead-out | 1 | 0x00 | 0x41

13:43:49 #12 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

13:43:49 #13 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

13:43:49 #14 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

13:43:49 #15 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 4x (5.540 KB/s)

13:43:49 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

13:43:50 #17 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 13:18,906 (798906ms) -> OK

13:43:50 #18 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

13:43:50 #19 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

13:43:50 #20 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

13:43:50 #21 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 30 01 02 04 06 00 00 - 00 08 00 00 00 00 00 00 .0..............
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

13:43:50 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

13:43:50 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

13:43:50 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

13:43:53 #25 Text 0 File Cdrdrv.cpp, Line 1284
13:43:53.495 - _NEC DVD_RW ND-2510A\H2 T0 : Queue again later

14:58:55 #26 Text 0 File WriterStatus.cpp, Line 116
<_NEC DVD_RW ND-2510A > start writing Lead-Out at LBA 2143824 (20B650h), lenght 0 blocks

14:58:55 #27 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

14:58:55 #28 Text 0 File DVDR.cpp, Line 2410
EndDAO: Last written address was 2143823

14:59:12 #29 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

14:59:12 #30 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

14:59:12 #31 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

14:59:13 #32 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

14:59:13 #33 Phase 37 File dlgbrnst.cpp, Line 1853
Burn process completed successfully at 4x (5.540 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 329MB (336896kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:02:12 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:02:12 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:02:12 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:02:12 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:02:13 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:02:13 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:02:13 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:02:13 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:02:13 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:02:15 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:02:15 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:02:16 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:02:16 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:02:16 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3.324 KB/s)

15:02:16 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:02:16 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 16:44,634 (1004634ms) -> OK

15:02:16 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

15:02:16 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:02:16 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:02:16 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:02:16 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:02:16 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:02:16 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:02:16 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:02:16 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:02:16 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:02:16 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:02:16 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 300MB (307336kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:12:42 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:12:42 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:12:42 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:12:42 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:12:43 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:12:43 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:12:43 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:12:43 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:12:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:12:44 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:12:45 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:12:45 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:12:45 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:12:45 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3.324 KB/s)

15:12:45 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:12:45 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 16:44,634 (1004634ms) -> OK

15:12:45 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

15:12:45 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:12:45 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:12:45 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:12:45 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:12:45 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:12:45 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:12:45 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:12:45 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:12:45 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:12:45 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:12:45 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 298MB (305500kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:13:40 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:13:40 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:13:40 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:13:40 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:13:41 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:13:41 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:13:41 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:13:41 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:13:41 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:13:42 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:13:42 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:13:42 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:13:42 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:13:42 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 1x (1.385 KB/s)

15:13:43 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:13:43 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 40:04,122 (2404122ms) -> OK

15:13:43 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

15:13:43 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:13:43 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:13:43 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:13:43 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:13:43 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:13:43 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:13:43 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:13:43 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:13:43 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:13:43 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:13:43 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 1x (1.385 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 274MB (281520kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:27:15 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:27:15 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:27:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:27:15 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:27:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:27:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:27:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:27:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:27:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:27:17 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:27:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:27:18 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:27:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:27:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3.324 KB/s)

15:27:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:27:18 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 16:44,634 (1004634ms) -> OK

15:27:18 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

15:27:18 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:27:18 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:27:18 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:27:18 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:27:18 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:27:18 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:27:18 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:27:18 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:27:18 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:27:18 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:27:18 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 266MB (273084kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:30:15 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:30:15 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:30:15 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:30:15 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:30:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:30:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:30:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:30:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:30:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:30:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:30:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:30:18 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:30:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:30:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3.324 KB/s)

15:30:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:30:19 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 16:44,634 (1004634ms) -> OK

15:30:19 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

15:30:19 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:30:19 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:30:19 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:30:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:30:19 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:30:19 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:30:19 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:30:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:30:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:30:19 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:30:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 242MB (248120kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:42:07 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:42:07 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:42:07 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:42:07 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:42:08 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:42:08 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:42:08 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:42:08 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:42:08 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:42:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:42:12 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:42:12 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:42:12 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:42:12 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3.324 KB/s)

15:42:12 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:42:12 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 16:44,634 (1004634ms) -> OK

15:42:12 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode for Multisession

15:42:12 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:42:12 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:42:12 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:42:12 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:42:12 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:42:12 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:42:12 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:42:12 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:42:12 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:42:12 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:42:12 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 269MB (275568kB)
Memory in use : 47 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:43:18 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:43:18 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:43:18 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:43:18 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:43:18 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:43:18 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:43:18 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:43:18 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:43:18 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:43:30 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:43:30 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:43:30 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:43:30 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:43:30 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 1x (1.385 KB/s)

15:43:30 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:43:30 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 40:04,122 (2404122ms) -> OK

15:43:30 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode for Multisession

15:43:30 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:43:30 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:43:30 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:43:30 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:43:30 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:43:30 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:43:30 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:43:30 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:43:30 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:43:30 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:43:30 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 1x (1.385 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 252MB (258088kB)
Memory in use : 50 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
15:49:16 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

15:49:16 #2 Text 0 File Reader.cpp, Line 127
Reader running

15:49:16 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

15:49:16 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

15:49:16 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

15:49:16 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

15:49:16 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

15:49:16 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

15:49:16 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

15:49:18 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

15:49:18 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

15:49:18 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

15:49:18 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

15:49:18 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3.324 KB/s)

15:49:18 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

15:49:18 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 16:44,634 (1004634ms) -> OK

15:49:19 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

15:49:19 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

15:49:19 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

15:49:19 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

15:49:19 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

15:49:19 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:49:19 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

15:49:19 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

15:49:19 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

15:49:19 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

15:49:19 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

15:49:19 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
.
.
1A23-0009-0030-2315-8317-2811

Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 28.07.2004 16:51:12
Nero version: 6.6.0.1 (Nero Express)
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST CD-ROM GCR-8520B>Version: 1.00 - HA 1 TA 0 - 6.6.0.1
Adapter driver: <IdeChnDr> HA 1

=== Scsi-Device-Map ===
DiskPeripheral : ST340824A IdeChnDr Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-ROM GCR-8520B IdeChnDr Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST CD-ROM GCR-8520 D: CDRom0
HL-DT-ST CD-RW GCE-8160B E: CDRom1
_NEC DVD_RW ND-2510A F: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523744kB)
Free physical memory: 217MB (222784kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

10.10.2006
ISO compilation
16:11:59 #1 Text 0 File Isodoc.cpp, Line 6165
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

16:11:59 #2 Text 0 File Reader.cpp, Line 127
Reader running

16:11:59 #3 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)

16:11:59 #4 Text 0 File Burncd.cpp, Line 3117
Turn on Disc-at-once, using DVD media

16:12:00 #5 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1606095 (356:54.45, 3136MB)

16:12:00 #6 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)

16:12:00 #7 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AM3
Disc Application Code: 64, Disc Physical Code: 193

16:12:00 #8 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================

16:12:00 #9 Text 0 File ThreadedTransferInterface.cpp, Line 844
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1606096 (1606096) = #1606096/356:54.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1606096 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------

16:12:01 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1047
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3289284608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1606096 | lead-out | 1 | 0x00 | 0x41

16:12:01 #11 Phase 24 File dlgbrnst.cpp, Line 1853
Caching of files started

16:12:01 #12 Text 0 File Burncd.cpp, Line 4003
Cache writing successful.

16:12:01 #13 Phase 25 File dlgbrnst.cpp, Line 1853
Caching of files completed

16:12:01 #14 Phase 36 File dlgbrnst.cpp, Line 1853
Burn process started at 2.4x (3.324 KB/s)

16:12:01 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2497
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

16:12:01 #16 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 16:44,634 (1004634ms) -> OK

16:12:01 #17 Text 0 File DVDR.cpp, Line 2027
Recording mode: Sequential Recording Mode

16:12:02 #18 Text 0 File Mmc.cpp, Line 20673
Set BUFE: Buffer underrun protection -> ON

16:12:02 #19 Text 0 File DVDR.cpp, Line 2168
Start write address at LBA 0
DVD high compatibility mode: Yes

16:12:02 #20 Text 0 File Cdrdrv.cpp, Line 8281
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................

16:12:02 #21 SCSI -1046 File Cdrdrv.cpp, Line 1178
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x18 0x81 0xD0 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05

16:12:02 #22 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

16:12:02 #23 Text 0 File DVDR.cpp, Line 5656
Book Type counter: 500, Book Type selected in EEPROM, command version 1

16:12:02 #24 Text 0 File DVDR.cpp, Line 4877
Drive: _NEC DVD_RW ND-2510A
Book Type request: DVD-ROM
Book Type setting not supported for the loaded disc type

16:12:02 #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1702
Illegal disc

16:12:02 #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1702
Could not perform start of Disc-at-once

16:12:02 #27 Text 0 File dlgbrnst.cpp, Line 1711
Set remaining time: 0:00,000 (0ms) -> OK

16:12:02 #28 Phase 38 File dlgbrnst.cpp, Line 1853
Burn process failed at 2.4x (3.324 KB/s)

Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.03.32a, size=20640 bytes, created 17.11.2005 19:19:28 (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)
File 'Drivers\IdeChnDr.sys': Ver=2.2.0.2126, 04/10/2002, size=93594 bytes, created 14.08.2002 01:00:00 (Adapter driver for src)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[ + quote]

arniebear

AfterDawn Addict

10. October 2006 @ 07:16

Link to this message

The firmware on your burner is out of date, go to the NEC site and get the latest and flash your burner, this should help you with media recognition. Read the directions for flashing.

http://support.necam.com/Optical/downloads/FlashFirmware/

Also multi-posting is against forum rules, I will ask that your other thread be closed.

http://forums.afterdawn.com/thread_view.cfm/405175

[ + quote]

matt72

Senior Member

10. October 2006 @ 07:47

Link to this message

Hi,

In addition to what arniebear stated:

Quote:
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.05 - HA 2 TA 0 - 6.6.0.1

You are a few versions behind on Nero 6. Before installing use this link http://ww2.nero.com/nero6/en/Clean_Tools.html
Run the clean tool to completely remove your current version of Nero, reboot and use the links below to get the known stable version of Nero.

http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe

Package 2
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe

Quote:
File 'Drivers\InCDfs.SYS': Ver=4, 3, 0, 5, size=93440 bytes, created 13.09.2004 11:54:06 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 0, 5, size=28672 bytes, created 13.09.2004 11:54:46 (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 0, 5, size=7680 bytes, created 13.09.2004 11:58:10 (InCD4 driver for win NT/2K/XP)

http://www.nero.com/nero6/enu/InCD_CleanTool.html incd is a packet writing software..use the above link to get the cleantool for incd and remove it from your system.

Quote:
Disc Manufacturer: CMC MA - G. AM3

This media is poorly manufatured I as well as others here would recommend using verbatims or sony (label needs to say made in Japan NOT Taiwan)

Quote:
CdRomPeripheral : HL-DT-ST CD-RW GCE-8160B IdeChnDr Port 1 ID 1 DMA: Off

DMA should be on use the below link to enable it:

http://www.burstcopy.com/dma/xp/

Quote:
1A23-0xx9-0030-xxxx-83xx-28xx

your serial number needs to be edited out before someone steals it (use the notepad to edit your post and remove your serial which appears several times thru-out your log)

[ + quote]

to burn or not to burn that is the question

need help w/ media read this http://forums.afterdawn.com/thread_view.cfm/155431

arniebear

AfterDawn Addict

10. October 2006 @ 07:54

Link to this message

Also, try burning at 4x at least, burning to slow is as bad as to fast and with today's media 4x is the slowest you need to go.

[ + quote]

Start a new thread

afterdawn.com > forums > software specific discussion > nero discussion > illegal disc problem with burning dvd


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.