|
|
|
Nero write Error!!! PLease Help
|
|
|
kumar50
Newbie
|
12. October 2006 @ 10:10 |
Link to this message
|
|
I bought my DVD writer about 6 months back and have burnt abt a 100 dvds till date but last week all of a sudden all the dvds i burn started giving me write errors. they were getting stuck at some point or other or they were burning properly but showing read errors during the verifying process. i have a TSST corp DVDw SH-W162C writer and i recently updated my firmware to the latest version and i think that is where the prob started but ever since then i have tried using every firmware before the current one but with same results. i have also tried reformatting my hard drive but it did not help i also did the ide drive uninstall thing to turn the pio to dma mode. PLease help cuz i have some data i have been downloading for the past 9 months and I DONT want to lose it.
Thanks
|
|
Advertisement
|
|
|
|
Senior Member
|
12. October 2006 @ 11:03 |
Link to this message
|
Hi there,
Please provide us a Nero burn log, there's lots of information / clues in there for others to see.
VSO Software Golden Membership Proud Owner / VSO Software Beta Tester
|
|
kumar50
Newbie
|
12. October 2006 @ 23:53 |
Link to this message
|
Ramamurthy
1C80-0000-19E5-MA2X-4005-2153-****
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS01 - HA 1 TA 1 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CDRW/DVD SM-348B>Version: T512 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-348B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162C atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CDRW/DVD SM-348B E: CDRom0
TSSTcorp CD/DVDW SH-W162C F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 254MB (260912kB)
Free physical memory: 83MB (85476kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.10.2006
ISO compilation
1:04:44 PM #1 Text 0 File Isodoc.cpp, Line 6510
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:04:44 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 39936KB of Memory
1:04:44 PM #3 Text 0 File Reader.cpp, Line 126
Reader running
1:04:44 PM #4 Text 0 File Writer.cpp, Line 123
Writer F: TSSTcorp CD/DVDW SH-W162C running
1:04:44 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
1:04:44 PM #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
1:04:45 PM #7 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2162655 (480:35.30, 4223MB)
1:04:45 PM #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO
1:04:45 PM #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD-R
Disc Manufacturer: Dvsn-8 - 0
Disc Application Code: 64, Disc Physical Code: 193
1:04:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:04:45 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2162656 (2162656) = #2162656/480:35.31
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2162656 blocks [F: TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------
1:04:45 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [F: TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4429119488, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2162656 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2162656 | 0 | 0x00
2162656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1:04:45 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:04:45 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
1:04:45 PM #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
1:04:45 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
1:04:45 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
1:04:45 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:04:45 PM #19 Text 0 File DVDR.cpp, Line 2969
Recording mode: Sequential Recording Mode
1:04:45 PM #20 Text 0 File DVDR.cpp, Line 3125
Start write address at LBA 0
DVD high compatibility mode: Yes
1:04:45 PM #21 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:05:06 PM #22 Text 0 File Cdrdrv.cpp, Line 1290
13:05:06.375 - F: TSSTcorp CD/DVDW SH-W162C : Queue again later
1:17:15 PM #23 SPTI -1114 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 04 82 00 00 00 20 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x08fb0000: Len x10000
0x61 EA AB 98 F0 23 B9 1F 0E 56 A7 B8 41 54 7B 61
0x07 29 D0 29 95 8D 4C 94 3C D4 73 BD 63 DE 06 C2
0x0B 49 A0 B1 02 24 23 F1 19 F2 48 E4 BB D7 81 BA
1:17:15 PM #24 CDR -1114 File Writer.cpp, Line 312
Reset occurred
F: TSSTcorp CD/DVDW SH-W162C
1:17:15 PM #25 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:17:15 PM #26 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
1:17:16 PM #27 Text 0 File DVDR.cpp, Line 3341
EndDAO: Last written address was 295423
1:17:16 PM #28 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
BTW This is a new kind of error that has occured.
|
AfterDawn Addict
|
13. October 2006 @ 04:21 |
Link to this message
|
you should never keep flashing your drive, changing from newer firmware versions to older firmware version and visa versa..... you may have hurt your drive! Your current firmware is too old .... I would do a last firmware upgrade to the latest firmware: TS11, and do not flash firmware again!
Firmware for your burner as that sets new write strategies for new media thats out..
Firmware is programming that is inserted into a programmable memory area of your drive, thus becoming a permanent part of a drive. This 'software' is called firmware and can be updated with a firmware flasher. Every company has its own methods to allow you to do a firmware upgrade. A firmware upgrade can add new functionality to your drive. Also bug fixes and improvements are done by firmware upgrades. To find you firmware go to your burner homepage and find the firmware for you make and model.
Quote:
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
this should not be all zeros! you drive/Nero is not recognizing your media properly
Quote:
Disc Manufacturer: Dvsn-8 - 0
don't know and never seen this media id before! this could be the problem here!
Quote:
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
this shows there is something definately wrong with your drive! maybe that's why it can't read or recognize your media... suspect that with all the firmware flashing: Quote:
i recently updated my firmware to the latest version and i think that is where the prob started but ever since then i have tried using every firmware before the current one but with same results
this may have damaged your drive!
|
|
kumar50
Newbie
|
13. October 2006 @ 07:33 |
Link to this message
|
i got a different error this time when i burnt a dvd. although sometimes i am able to burn DVD-RWs bit no DVD-Rs. This is the log for the 2nd one
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'D:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.5.1.1
Internal Version: 7, 5, 1, 1
(Nero Express)
Recorder: <TSSTcorp CD/DVDW SH-W162C>Version: TS01 - HA 1 TA 1 - 7.5.1.1
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CDRW/DVD SM-348B>Version: T512 - HA 1 TA 0 - 7.5.1.1
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST340016A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CDRW/DVD SM-348B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TSSTcorp CD/DVDW SH-W162C atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CDRW/DVD SM-348B E: CDRom0
TSSTcorp CD/DVDW SH-W162C F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 254MB (260912kB)
Free physical memory: 88MB (90464kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
13.10.2006
ISO compilation
1:39:43 PM #1 Text 0 File Isodoc.cpp, Line 6510
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
1:39:43 PM #2 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 39936KB of Memory
1:39:43 PM #3 Text 0 File Reader.cpp, Line 126
Reader running
1:39:43 PM #4 Text 0 File Writer.cpp, Line 123
Writer F: TSSTcorp CD/DVDW SH-W162C running
1:39:43 PM #5 ISO9660GEN -11 File Geniso.cpp, Line 3313
First writeable address = 0 (0x00000000)
1:39:43 PM #6 Text 0 File Burncd.cpp, Line 3443
Turn on Disc-At-Once, using DVD media
1:39:43 PM #7 Text 0 File DlgWaitCD.cpp, Line 300
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2162655 (480:35.30, 4223MB)
1:39:43 PM #8 Text 0 File DlgWaitCD.cpp, Line 312
Write in overburning mode: NO
1:39:43 PM #9 Text 0 File DlgWaitCD.cpp, Line 2851
Recorder: TSSTcorp CD/DVDW SH-W162C, Media type: DVD+RW
Disc Manufacturer ID: MBIPG101, Media Type ID: W04, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 1
1:39:43 PM #10 Text 0 File DlgWaitCD.cpp, Line 484
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:39:43 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 863
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2162656 (2162656) = #2162656/480:35.31
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2162656 blocks [F: TSSTcorp CD/DVDW SH-W162C]
--------------------------------------------------------------
1:39:44 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1079
Prepare recorder [F: TSSTcorp CD/DVDW SH-W162C] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4429119488, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2162656 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2162656 | 0 | 0x00
2162656 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
1:39:44 PM #13 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:39:44 PM #14 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
1:39:44 PM #15 Text 0 File Burncd.cpp, Line 4274
Cache writing successful.
1:39:44 PM #16 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
1:39:44 PM #17 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5,540 KB/s)
1:39:44 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2746
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:39:44 PM #19 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:39:44 PM #20 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:39:44 PM #21 Text 0 File Cdrdrv.cpp, Line 9215
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+RW (9), Part Version: 1.1x (2)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 1 h
Disc Manufacturer ID: MBIPG101
Media type ID: W04
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 57
Media Specific [16..63]:
00 00 01 4D 42 49 50 47 - 31 30 31 57 30 34 00 39 ...MBIPG101W04.9
23 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 #...............
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
1:39:44 PM #22 Text 0 File DVDR.cpp, Line 7889
Drive: TSSTcorp CD/DVDW SH-W162C
Book Type request [TSST]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
1:39:44 PM #23 CDR -1207 File DVDR.cpp, Line 6022
Book Type automatically set to: DVD-ROM
1:39:44 PM #24 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: No
1:53:03 PM #25 Text 0 File WriterStatus.cpp, Line 116
<F: TSSTcorp CD/DVDW SH-W162C> start writing Lead-Out at LBA 2162656 (20FFE0h), length 0 blocks
1:53:03 PM #26 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
1:53:04 PM #27 Phase 37 File dlgbrnst.cpp, Line 1730
Burn process completed successfully at 4x (5,540 KB/s)
1:53:04 PM #28 Phase 78 File dlgbrnst.cpp, Line 1730
Data verification started
2:07:50 PM #29 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 A4 B0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:08:28 PM #30 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 BD 90 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:08:28 PM #31 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1615024 to 1615039
2:08:44 PM #32 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 BF 00 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:08:44 PM #33 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1621392 to 1621407
2:09:08 PM #34 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 C0 30 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:09:08 PM #35 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1621760 to 1621775
2:09:35 PM #36 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 D2 A0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:09:35 PM #37 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1622064 to 1622079
2:09:48 PM #38 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 D2 E0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:09:48 PM #39 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1626784 to 1626799
2:10:06 PM #40 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 D3 D0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:10:06 PM #41 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1626848 to 1626863
2:10:22 PM #42 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 D5 80 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:10:22 PM #43 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1627088 to 1627103
2:10:46 PM #44 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 18 D8 60 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:10:46 PM #45 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1627520 to 1627535
2:12:00 PM #46 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 1A 00 50 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:12:00 PM #47 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1628256 to 1628271
2:12:40 PM #48 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 1A 1F D0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:12:40 PM #49 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1704016 to 1704031
2:12:58 PM #50 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 1A 27 A0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:12:58 PM #51 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1712080 to 1712095
2:13:34 PM #52 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 1A 2F B0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:13:34 PM #53 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1714080 to 1714095
2:13:47 PM #54 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 1A 2F F0 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:13:47 PM #55 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1716144 to 1716159
2:14:00 PM #56 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 1A 30 30 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:14:00 PM #57 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1716208 to 1716223
2:14:07 PM #58 Phase 40 File dlgbrnst.cpp, Line 1417
Aborted by user
2:14:13 PM #59 SPTI -1 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x3E
Sense Qual: 0x02
CDB Data: 0x28 00 00 1A 30 70 00 00 10 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 3E 02
Buffer x05fc1c00: Len x8000
2:14:13 PM #60 SectorVerify 20 File Cdrdrv.cpp, Line 10404
Read errors from sector 1716272 to 1716287
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
13. October 2006 @ 12:14 |
Link to this message
|
|
you are using crappy media! Moser Baer is made in India and it's crap! Stick with the disks Made In Japan. You'll have less errors if you stick with the MIJ rule. Verbatim is the only exception because they are top notch media and made in Taiwan/Singapore. Taiyo Yuden, Sony, Maxell, Fuji and other brands are MIJ.... read the lable on the box or the spindle and make sure it is MIJ and you can't go wrong!
You have 256MB of Ram which is the very minimum ...... do not multi task, go on the internet, shut down all unnessissary back ground programs, even shut your anti virus down while you burn! Or installing more RAM would be nice! And will help with the errors you are getting!
you still didn't update your firmware for the TSSTcorp CD/DVDW SH-W162C to TS11. sooooooo this is my advise to you.....
1. update your firmware
2. use better media
3. install more RAM or do not mutitask, etc.
4. I would also have your drive checked out because of the KEY_HARDWARE_ERROR you are getting!
do this or don't and keep getting errors!
|
|
Advertisement
|
|
|
Moderator
|
24. October 2006 @ 01:43 |
Link to this message
|
closed as problem has now spread here - http://forums.afterdawn.com/thread_view.cfm/411265
as advised by hursty in that new one, you should follow the advice kindly given, it could be the difference between you burning successfully again and your warranty running out
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
