Burning A DVD used to take 8 min, now takes more than that

Advertise at AfterDawn.com

Link to us!

Private messages

Compose a private message

List of all updated threads

Threads without replies

Search messages

Wednesday 4.3.2026 / 09:51

Search AfterDawn Forums:

afterdawn.com > forums > software specific discussion > nero discussion > burning a dvd used to take 8 min, now takes more than that

Browse by topic

Forums

Start a new thread

Burning A DVD used to take 8 min, now takes more than that

Jump to:

Posted

Message

bharatgr8

Newbie

30. October 2006 @ 08:38

Link to this message

Hello guys,
My DVD burner is in DMA mode..Even then my DVD writer takes a lot of time to burn a DVD of Speed 8x.Note that my DVD writer is SLAVE and i got one DVD ROM also which is in MASTER.So is this gotta do anything?
Surprisingly, my hard disk has DMA turned off.
So do u guys think my harddisk not being in DMA mode has anything to do with the performance of DVD writing.
Moreover,i find my system very slow these days.And it hangs frequently.So i doubt that the harddisk is creating the scene here.
Wat do u suggest me to do?

[ + quote]

nasayin

Senior Member

30. October 2006 @ 09:38

Link to this message

You have to turn your hard disk DMA on.

[ + quote]

nasayin

bharatgr8

Newbie

30. October 2006 @ 17:25

Link to this message

But the problem is that i m unable to turn my hard disk into DMA mode using device manager bcoz there was no selection menu for DMA and PIO modes.It was in NOT APPLICABLE mode.With the help of Nero INFO TOOL,I found the channel in which my harddisk exists and i uninstalled it in DEVICE MANAGER and i rebooted the system.
But again, it was back to NOT APPLICABLE mode

[ + quote]

attar

AfterDawn Addict

31. October 2006 @ 04:12

Link to this message

Assuming that the hard drive is device 0 on the primary, do the advanced settings show it as being auto detected?
If not , it can be changed in the PC bios (press 'del' at boot up).

[ + quote]

nasayin

Senior Member

31. October 2006 @ 11:10

Link to this message

@bharatgr8

Post your Nero log file please.

[ + quote]

nasayin

bharatgr8

Newbie

31. October 2006 @ 20:18

Link to this message

pls tell me the procedure to get the LOG file.
i donno anything abt the whereabouts of LOG file of Nero.How do u generate it?

[ + quote]

gwendolin

AfterDawn Addict

31. October 2006 @ 20:24

Link to this message

Nero history logs are located here

Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt

Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory.tx

[ + quote]

guide by ScubaPete http://www.dvdplusvideo.com/tutorial007.html Nero guide by alkohol http://www.dvdplusvideo.com/Guides/alkohol_guide3.html

New RipIt4Me + DVD Shrink + ImgBurn guid <==== Rip any DVDs http://forums.afterdawn.com/thread_view.cfm/422740 Guides by bbmayo..... http://webpages.charter.net/bacitup/

bharatgr8

Newbie

1. November 2006 @ 16:12

Link to this message

Hi...
this is the log file of my Nero 6 ultra edition
--------------------------------------------------------------------
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 505MB (517632kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.9.2006
CD-ROM (ISO)
4:03:49 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:03:49 PM #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

4:03:49 PM #3 Text 0 File Reader.cpp, Line 126
Reader running

4:03:49 PM #4 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

4:03:49 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:03:49 PM #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media

4:03:51 PM #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 350571 ( 77:56.21)

4:03:51 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

4:03:51 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:03:51 PM #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

4:03:51 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 350572 (350572) = #350572/77:54.22
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 350570 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

4:03:51 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 718278656, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
350572 | lead-out | 1 | 0x00 | 0x41

4:03:51 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 350572 -> 350570.

4:03:51 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

4:03:51 PM #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

4:03:51 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

4:03:51 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

4:03:51 PM #18 Phase 92 File dlgbrnst.cpp, Line 1855
Recording quality may be affected by not using JustSpeed option

4:03:51 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:03:51 PM #20 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , Generic write control : OFF

4:07:53 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:07:56 PM #22 Text 0 File Mmc.cpp, Line 15480
<IOMEGA DVDRW12448IND-B > start Close Session

4:08:10 PM #23 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 502MB (514244kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.9.2006
CD-ROM (ISO)
4:15:30 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:15:30 PM #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

4:15:30 PM #3 Text 0 File Reader.cpp, Line 126
Reader running

4:15:30 PM #4 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

4:15:30 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:15:30 PM #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media

4:15:31 PM #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 355847 ( 79:06.47)

4:15:31 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

4:15:31 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:15:31 PM #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

4:15:31 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 355848 (355848) = #355848/79:4.48
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 355846 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

4:15:31 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 729083904, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
355848 | lead-out | 1 | 0x00 | 0x41

4:15:31 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 355848 -> 355846.

4:15:31 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

4:15:31 PM #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

4:15:31 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

4:15:31 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

4:15:31 PM #18 Phase 92 File dlgbrnst.cpp, Line 1855
Recording quality may be affected by not using JustSpeed option

4:15:31 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:15:32 PM #20 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , Generic write control : OFF

4:19:41 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:19:43 PM #22 Text 0 File Mmc.cpp, Line 15480
<IOMEGA DVDRW12448IND-B > start Close Session

4:19:57 PM #23 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 486MB (498116kB)
Memory in use : 36 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.9.2006
Video CD
4:35:44 PM #1 Text 0 File VCDDoc.cpp, Line 1481
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

4:35:44 PM #2 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:35:44 PM #3 Text 0 File VCDDoc.cpp, Line 2774
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------

4:35:44 PM #4 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

4:35:45 PM #5 Text 0 File Reader.cpp, Line 126
Reader running

4:35:45 PM #6 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

4:35:45 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:35:45 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:35:45 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using CD-R/RW media

4:35:45 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 239967 ( 53:21.42)

4:35:45 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

4:35:45 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:35:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:35:45 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1311 (1311) = #1311/0:17.36
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 1311 blocks [IOMEGA DVDRW12448IND-B ]
1: TRM_DATA_MODE2_2336 (AVSEQ01)
2 indices, index0 (150) not provided
original disc pos #0 + 238507 (238507) = #238507/53:0.7
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 238507 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

4:35:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 3412896, ISRC ""
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 3412896 3763296 560915648, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1311 | 2 | 0 | 0x00 | 0x41
1461 | 2 | 1 | 0x00 | 0x41
239968 | lead-out | 1 | 0x00 | 0x41

4:35:45 PM #16 Phase 73 File dlgbrnst.cpp, Line 1855
Preparing items

4:35:46 PM #17 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

4:35:46 PM #18 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

4:35:46 PM #19 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

4:35:46 PM #20 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

4:35:46 PM #21 Phase 92 File dlgbrnst.cpp, Line 1855
Recording quality may be affected by not using JustSpeed option

4:35:46 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:35:46 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1461

4:35:46 PM #24 Text 0 File Mmc.cpp, Line 16040
StartDAO : CD-Text - Off

4:35:46 PM #25 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , Generic write control : OFF

4:35:46 PM #26 Text 0 File Mmc.cpp, Line 16327
CueData, Len=48
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 02 00 20 00 00 13 24
41 02 01 20 00 00 15 24
41 aa 01 24 00 35 15 2b

4:38:40 PM #27 Text 0 File WriterStatus.cpp, Line 115
<IOMEGA DVDRW12448IND-B > start writing Lead-Out at LBA 239968 (3A960h), lenght 0 blocks

4:38:44 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:38:44 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

4:38:44 PM #30 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 468MB (479824kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.9.2006
Video CD
4:43:15 PM #1 Text 0 File VCDDoc.cpp, Line 1481
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

4:43:15 PM #2 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:43:15 PM #3 Text 0 File VCDDoc.cpp, Line 2774
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------

4:43:15 PM #4 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

4:43:16 PM #5 Text 0 File Reader.cpp, Line 126
Reader running

4:43:16 PM #6 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

4:43:16 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:43:16 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:43:16 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using CD-R/RW media

4:43:16 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 208988 ( 46:28.38)

4:43:16 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

4:43:16 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:43:16 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:43:16 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1310 (1310) = #1310/0:17.35
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 1310 blocks [IOMEGA DVDRW12448IND-B ]
1: TRM_DATA_MODE2_2336 (AVSEQ02)
2 indices, index0 (150) not provided
original disc pos #0 + 207529 (207529) = #207529/46:7.4
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 207529 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

4:43:16 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 3410560, ISRC ""
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 3410560 3760960 488548704, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1310 | 2 | 0 | 0x00 | 0x41
1460 | 2 | 1 | 0x00 | 0x41
208989 | lead-out | 1 | 0x00 | 0x41

4:43:16 PM #16 Phase 73 File dlgbrnst.cpp, Line 1855
Preparing items

4:43:16 PM #17 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

4:43:16 PM #18 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

4:43:16 PM #19 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

4:43:16 PM #20 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

4:43:16 PM #21 Phase 92 File dlgbrnst.cpp, Line 1855
Recording quality may be affected by not using JustSpeed option

4:43:16 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:43:16 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1460

4:43:16 PM #24 Text 0 File Mmc.cpp, Line 16040
StartDAO : CD-Text - Off

4:43:16 PM #25 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , Generic write control : OFF

4:43:16 PM #26 Text 0 File Mmc.cpp, Line 16327
CueData, Len=48
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 02 00 20 00 00 13 23
41 02 01 20 00 00 15 23
41 aa 01 24 00 2e 1c 27

4:45:28 PM #27 Text 0 File WriterStatus.cpp, Line 115
<IOMEGA DVDRW12448IND-B > start writing Lead-Out at LBA 208989 (3305Dh), lenght 0 blocks

4:45:32 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:45:32 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

4:45:32 PM #30 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 473MB (484824kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

17.9.2006
Video CD
4:50:17 PM #1 Text 0 File VCDDoc.cpp, Line 1481
VideoCD document burn settings
------------------------------------------
Compilation type : VCD
Menu : Enable
Picture in separate folder : TRUE
Folder name :PICTURES
Use CD-I : TRUE
CD-I configuration : CONTROLS=ALL

CURCOL=YELLOW

PSDCURCOL=RED

PSDCURSHAPE=ARROW

CENTRTRACK=2

AUTOPLAY=AUTO_ON

DUALCHAN=DUAL_ON

TIMECODE_X=64

TIMECODE_Y=100

LOTID_X=64

LOTID_Y=64

ALBUM=STANDARD
Encoding bitrate mode : User defined (kb/s)

4:50:17 PM #2 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 2 / XA
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

4:50:17 PM #3 Text 0 File VCDDoc.cpp, Line 2774
VCD options:
-----------------------------------------------------
Create standard compliant CD: YES
Encoding resolution: PAL
-----------------------------------------------------

4:50:17 PM #4 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

4:50:17 PM #5 Text 0 File Reader.cpp, Line 126
Reader running

4:50:17 PM #6 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

4:50:17 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:50:17 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

4:50:17 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using CD-R/RW media

4:50:17 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 260076 ( 57:49.51)

4:50:17 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

4:50:17 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

4:50:17 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

4:50:17 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE2_2336 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 1312 (1312) = #1312/0:17.37
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 1312 blocks [IOMEGA DVDRW12448IND-B ]
1: TRM_DATA_MODE2_2336 (AVSEQ03)
2 indices, index0 (150) not provided
original disc pos #0 + 258615 (258615) = #258615/57:28.15
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE2_2336, 2336, config 0, wanted index0 0 blocks, length 258615 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

4:50:18 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x20; Session Closed, disc fixated
Tracks 1 to 2:
1: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 0 350400 3415232, ISRC ""
2: TRM_DATA_MODE2_2336, 2336/0x00, FilePos 3415232 3765632 607890272, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
1312 | 2 | 0 | 0x00 | 0x41
1462 | 2 | 1 | 0x00 | 0x41
260077 | lead-out | 1 | 0x00 | 0x41

4:50:18 PM #16 Phase 73 File dlgbrnst.cpp, Line 1855
Preparing items

4:50:18 PM #17 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

4:50:18 PM #18 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

4:50:18 PM #19 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

4:50:18 PM #20 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

4:50:18 PM #21 Phase 92 File dlgbrnst.cpp, Line 1855
Recording quality may be affected by not using JustSpeed option

4:50:18 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

4:50:18 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 1 (relocatable, no disc pos, no patch infos, orig at #0): write at #1462

4:50:18 PM #24 Text 0 File Mmc.cpp, Line 16040
StartDAO : CD-Text - Off

4:50:18 PM #25 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , Generic write control : OFF

4:50:18 PM #26 Text 0 File Mmc.cpp, Line 16327
CueData, Len=48
41 00 00 24 00 00 00 00
41 01 00 20 00 00 00 00
41 01 01 20 00 00 02 00
41 02 00 20 00 00 13 25
41 02 01 20 00 00 15 25
41 aa 01 24 00 39 31 34

4:53:11 PM #27 Text 0 File WriterStatus.cpp, Line 115
<IOMEGA DVDRW12448IND-B > start writing Lead-Out at LBA 260077 (3F7EDh), lenght 0 blocks

4:53:15 PM #28 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

4:53:15 PM #29 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

4:53:15 PM #30 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 418MB (428660kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

24.9.2006
CD-ROM (ISO)
6:13:09 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:13:09 PM #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

6:13:09 PM #3 Text 0 File Reader.cpp, Line 126
Reader running

6:13:09 PM #4 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

6:13:09 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:13:09 PM #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media

6:13:09 PM #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 599 ( 0:09.74)

6:13:09 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

6:13:09 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

6:13:09 PM #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:13:09 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 600 (600) = #600/0:8.0
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 598 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

6:13:09 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 1536000, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
600 | lead-out | 1 | 0x00 | 0x41

6:13:09 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 600 -> 598.

6:13:10 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

6:13:10 PM #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

6:13:10 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

6:13:10 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

6:13:10 PM #18 Phase 92 File dlgbrnst.cpp, Line 1855
Recording quality may be affected by not using JustSpeed option

6:13:10 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:13:10 PM #20 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , Generic write control : OFF

6:13:27 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

6:13:28 PM #22 Text 0 File Mmc.cpp, Line 15480
<IOMEGA DVDRW12448IND-B > start Close Session

6:13:45 PM #23 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 411MB (420888kB)
Memory in use : 46 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

8.10.2006
CD-ROM (ISO)
1:20:03 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

1:20:03 PM #2 Phase 90 File dlgbrnst.cpp, Line 1855
Buffer Underrun Protection activated

1:20:03 PM #3 Text 0 File Reader.cpp, Line 126
Reader running

1:20:03 PM #4 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

1:20:03 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:20:03 PM #6 Text 0 File Burncd.cpp, Line 3152
Turn on Track-at-once, using CD-R/RW media

1:20:05 PM #7 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 349320 ( 77:39.45)

1:20:05 PM #8 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

1:20:05 PM #9 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B;
CDR code: 00 97 17 06; OSJ entry from: Moser Baer India Limited
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 11 06 (LI 97:17.06), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 80 (invalid), 2: 00 80 00 (invalid), 3: 00 80 80 (invalid)

1:20:05 PM #10 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert the disc to write to.
(Medium in drive: CD-R. Medium required by compilation: CD-R/RW.)

1:20:05 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 349321 (349321) = #349321/77:37.46
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 349319 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

1:20:06 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 715716608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
349321 | lead-out | 1 | 0x00 | 0x41

1:20:06 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 1. Length: 349321 -> 349319.

1:20:06 PM #14 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

1:20:06 PM #15 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

1:20:06 PM #16 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

1:20:06 PM #17 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 48x (7,200 KB/s)

1:20:06 PM #18 Phase 92 File dlgbrnst.cpp, Line 1855
Recording quality may be affected by not using JustSpeed option

1:20:06 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

1:20:06 PM #20 Text 0 File Mmc.cpp, Line 20660
Set BUFE: supported -> ON , Generic write control : OFF

1:24:10 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

1:24:13 PM #22 Text 0 File Mmc.cpp, Line 15480
<IOMEGA DVDRW12448IND-B > start Close Session

1:24:27 PM #23 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 48x (7,200 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 519MB (531692kB)
Memory in use : 32 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.10.2006
ISO compilation
6:40:44 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

6:40:44 PM #2 Text 0 File Reader.cpp, Line 126
Reader running

6:40:44 PM #3 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

6:40:44 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

6:40:44 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

6:40:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2253231 (500:43.06, 4400MB)

6:40:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

6:40:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

6:40:44 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

6:40:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2253232 (2253232) = #2253232/500:43.7
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2253232 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

6:40:50 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4614619136, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2253232 | lead-out | 1 | 0x00 | 0x41

6:40:51 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

6:40:51 PM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

6:40:51 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

6:40:51 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)

6:40:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

6:40:51 PM #17 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

6:40:51 PM #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 7:05,398 (425398ms) -> OK

6:40:51 PM #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

7:05:56 PM #20 Text 0 File WriterStatus.cpp, Line 115
<IOMEGA DVDRW12448IND-B > start writing Lead-Out at LBA 2253232 (2261B0h), lenght 0 blocks

7:05:56 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:06:37 PM #22 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:06:37 PM #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:06:37 PM #24 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 2 ID 0 DMA: Off
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 450MB (461056kB)
Memory in use : 41 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

15.10.2006
ISO compilation
7:22:08 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

7:22:08 PM #2 Text 0 File Reader.cpp, Line 126
Reader running

7:22:08 PM #3 Text 0 File Writer.cpp, Line 124
Writer IOMEGA DVDRW12448IND-B running

7:22:08 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

7:22:08 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

7:22:08 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2204927 (489:59.02, 4306MB)

7:22:08 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

7:22:08 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

7:22:08 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================

7:22:08 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2204928 (2204928) = #2204928/489:59.3
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2204928 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

7:22:12 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [IOMEGA DVDRW12448IND-B ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4515692544, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2204928 | lead-out | 1 | 0x00 | 0x41

7:22:12 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started

7:22:12 PM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.

7:22:12 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed

7:22:12 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)

7:22:12 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0

7:22:12 PM #17 Text 0 File Cdrdrv.cpp, Line 8230
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: MBIPG101
Media type ID: R04
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 4D 42 49 50 47 - 31 30 31 52 30 34 01 38 ...MBIPG101R04.8
23 54 37 12 02 42 6E 02 - A8 6B 15 15 0B 0B 08 08 #T7..Bn..k......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................

7:22:12 PM #18 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 6:56,679 (416679ms) -> OK

7:22:12 PM #19 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes

7:46:51 PM #20 Text 0 File WriterStatus.cpp, Line 115
<IOMEGA DVDRW12448IND-B > start writing Lead-Out at LBA 2204928 (21A500h), lenght 0 blocks

7:46:51 PM #21 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion

7:47:17 PM #22 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:47:17 PM #23 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK

7:47:17 PM #24 Phase 37 File dlgbrnst.cpp, Line 1855
Burn process completed successfully at 8x (11,080 KB/s)

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======
Sandeep Kasamsetty
RK Industries
1A23-0009-1030-1538-8523-4849

Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 21-12-2003 8:57:00 AM
ahead WinASPI: File 'C:\Program Files\Nero\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 22-07-2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <IOMEGA DVDRW12448IND-B> Version: TOSB - HA 3 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HL-DT-ST DVD-ROM GDR8163B>Version: 0L23 - HA 0 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 0

=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 1 DMA: Off
DiskPeripheral : ST3160023AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : IOMEGA DVDRW12448IND-B atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FvF-Inc CDDVD-2003-200x 0800 FVDSCSI Port 4 ID 0 DMA: Off

=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 J: CDRom0
IOMEGA DVDRW12448IND-B L: CDRom1
FvF-Inc CDDVD-2003-200x M: CDRom2
=======================

AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785128kB)
Free physical memory: 492MB (504628kB)
Memory in use : 35 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)

16.10.2006
ISO compilation
1:17:25 AM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : TRUE
Write : FALSE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE

1:17:25 AM #2 Text 0 File Reader.cpp, Line 126
Reader running

1:17:25 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)

1:17:25 AM #4 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media

1:18:05 AM #5 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2150495 (477:53.20, 4200MB)

1:18:05 AM #6 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD DVD)

1:18:05 AM #7 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: IOMEGA DVDRW12448IND-B, Media type: DVD+R
Disc Manufacturer ID: MBIPG101, Media Type ID: R04, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 3

1:18:05 AM #8 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: Unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW.)

1:18:05 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2150496 (2150496) = #2150496/477:53.21
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2150496 blocks [IOMEGA DVDRW12448IND-B ]
--------------------------------------------------------------

1:18:08 AM #10 Phase 40 File dlgbrnst.cpp, Line 1855
Aborted by user

Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 21-12-2003 8:57:00 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 03-08-2004 10:59:44 PM (Adapter driver for rec)

Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)

====== *** Nero-Burning Rom, History File *** ======

[ + quote]

bharatgr8

Newbie

1. November 2006 @ 16:13

Link to this message

[ + quote]

attar

AfterDawn Addict

2. November 2006 @ 13:59

Link to this message

I don't think 'Not Applicable' is a 'mode'.
It means that there is no device.
I asked earlier if you had checked the bios to see if your devices were listed and set for auto detect.
Also, is your hard drive one of the newer 'Sata' types.
Perhaps there is a reference in your bios?

BTW your Nero serial (begins 1A23) should be edited out of your posts, for security.

[ + quote]

This message has been edited since posting. Last time this message was edited on 2. November 2006 @ 14:01

bharatgr8

Newbie

2. November 2006 @ 21:37

Link to this message

yah..i bought the 160gb SATA harddisk about 2-3 yrs back.
How do i check in BIOS whether my devices are in AUTO DETECT mode or not?
Pls lemme know.I m getting tired of this problem.
I m unable 2 write DVDs properly.
Some fail burning.Some take 20-30min for burning a single DVD of 4.5gb.
Anyways pls lemme know on How do i check in BIOS whether my devices are in AUTO DETECT mode or not?

[ + quote]

attar

AfterDawn Addict

3. November 2006 @ 01:19

Link to this message

Since you have had this HD for a number of years and everything worked before, there would be no reason that the bios settings have changed.
I assume you have made sure that your PC is virus free (you did say that your system seems to be slow) and you have defragged the drive.

When your machine boots up, a brief message should be displayed.The message indicates the key to press.
Depending on your make of motherboard (this example is for Asus) as you boot-up tap the 'del' key.
Various tabs are displayed, selecting them gives various settings for hardware etc.
Look for the screen that shows your hard drive and check to see if the autodetect option is offered.
Don't make changes to anything you are not comfortable with.

[ + quote]

Start a new thread

afterdawn.com > forums > software specific discussion > nero discussion > burning a dvd used to take 8 min, now takes more than that


		User name	Password

		Not registered yet? Register here. Lost your password? Click here.