|
slave hdd/new
|
|
|
bojan087
Member
|
10. November 2006 @ 11:20 |
Link to this message
|
|
i just received my western digital hd from newegg 160gb, i changed the jumpers in the back to master, and the new hd to slave, and started my computer, and went to my computer and it only had my previous drive C:\, i went into add hardware and found the 160gb hd and it told me its working properly, so i went into the device manager, and it told me it was running fine. so i restarted my computer and went into the bios and found the harddrive there also, but yet when i go into my computer it doesnt show up. now my question is do i have to fdisk it? or what am i suppose to do. im afraid to fdisk under the cmos because i dont want to format my original harddrive. thanx in andanve
|
|
Advertisement
|
 |
|
|
Senior Member
|
10. November 2006 @ 12:10 |
Link to this message
|
|
yes you do, it's still raw data and needs to be formatted.
|
|
bojan087
Member
|
10. November 2006 @ 12:12 |
Link to this message
|
|
how do i format it, i just went into the administrative tools and am formatting it right now "i think" but its taking a really long time to format, and its telling me i can only format 21.05 GB NTFS and 128.00gb Formatting under Disk 1, but is there anyway i can combine the 21.05 with the 128.00gb? because they're under the same disk 1?
|
Senior Member
|
10. November 2006 @ 12:27 |
Link to this message
|
|
update to xp sp2
|
|
bojan087
Member
|
12. November 2006 @ 15:46 |
Link to this message
|
|
okay so after the formating the harddrive as a slave drive i put it as a master drive and tried to install win xp pro on it. when i booted the computer "before installation of cd" it told me that there were no operating systems. i used this cd before to format/re-install harddrives. Im guessing i need to format it again, but i dont know how to fdisk the harddrive because i cant get to the command prompt. anyhelp would be great
|
|
bojan087
Member
|
13. November 2006 @ 19:21 |
Link to this message
|
|
anybodys help on this one? i'll try a different xp cd tomorrow, but things should work properly if i set the jumper to master/single, and plug it in with ide cables and power cable. the xp cd should take care of all the rest of the formating and installings right?
|
Senior Member
|
13. November 2006 @ 23:56 |
Link to this message
|
|
sorry mate bf2142 is taking over my life a bit.
if you just set it to boot from cd(in the bios), and them start the install it will format it before it installs xp.
|
|
bojan087
Member
|
14. November 2006 @ 13:09 |
Link to this message
|
|
i did i have my cd rom set to 1st priority and the harddrive second in my bios but when i f10 save and exit and restarts my computer i get the same thing "Reboot and select proper boot device or inster boot media in selected boot device and press a key" i get that everysingle time no matter what i do, im gonna try to install my mother board first or other cd's that i find could help. i set the cd rom as master, and the harddrive on the far right just the way it came, ::::[:]
|
Senior Member
|
14. November 2006 @ 14:49 |
Link to this message
|
|
you dont need to change the jumpers just the priority in the bios
have you tried pressing any key just to see if it works?
yes? ok daft question, is it possible that your disk is damaged?
or the disk drive is faulty?
|
|
bojan087
Member
|
14. November 2006 @ 14:54 |
Link to this message
|
|
i had my sister get me a 160 sata harddrive before this one and my skl told me that it was faulty, so she returned it and i got this one from newegg.com. im pretty sure its not the hard drive that is physically damaged. so that is where i am stuck. under bios it has cd/dvd as a drive. i tried swithching them between my cd rom and my dvd rom but neither one gave me anything different. in bios is wasnt specific on what brand or w/e it was
|
Senior Member
|
14. November 2006 @ 15:00 |
Link to this message
|
|
not the hard disk has a a fault, the cd itself could be scratched, or the rom drive might have the fault.
if you have more than one cd/dvd drive have you tried both?
hold on xp sp1 doesnt have support for sata drives you need to get the driver from your mobo makers website for it.
This message has been edited since posting. Last time this message was edited on 14. November 2006 @ 15:01
|
|
bojan087
Member
|
14. November 2006 @ 17:32 |
Link to this message
|
|
yea thats what i realized at the end after doing reaserch, and thats how i realized that the sata harddrive was faulty, but i'd say different about this new ide hard drive. so what should i do? i tried almost everything i believe. my only option left is i think to get a new win xp cd
|
|
ddp
Moderator
|
14. November 2006 @ 18:00 |
Link to this message
|
|
the c:drive, is that a western digital?
|
|
bojan087
Member
|
14. November 2006 @ 18:02 |
Link to this message
|
|
yes, the only drive in the comptuer
|
|
ddp
Moderator
|
14. November 2006 @ 18:09 |
Link to this message
|
|
take the jumper off the hd & see if the bios sees the drive. wd drives are not to be jumpered master if only drive on cable.
|
|
bojan087
Member
|
14. November 2006 @ 18:18 |
Link to this message
|
|
Take off jumper, power cable on hdd, ide cable is on motherboard and the middle connection is on hdd, go into bios and boot device priority, 1st boot device [cd/dvd] 2nd boot device [HDD:PM-WDC WD1600J] im taking it thats the harddrive, and 3rd boot drvice [disabled]. under hard disk drives it has 1st Drive [HDD:PM-WDC WD1600J] and thats all thats in that section
|
|
ddp
Moderator
|
14. November 2006 @ 18:23 |
Link to this message
|
|
that is it. now boot off your xp cd to partition & format the hd so can load xp onto hd.
|
|
bojan087
Member
|
14. November 2006 @ 18:26 |
Link to this message
|
|
i still get the same message "reboot and select proper boot device or inster boot media in selected boot device and press a key" this is frustrating
|
|
ddp
Moderator
|
14. November 2006 @ 18:28 |
Link to this message
|
|
did you partition & format the hd 1st?
|
|
bojan087
Member
|
14. November 2006 @ 18:30 |
Link to this message
|
|
thats what im trying to do, because the computers recognizes it, and i've been told that i only need to insert the xp cd in the cd rom and that the xp cd will format the drive by its self, and i dont know how to get to a cmos for a fdisk or any of that sort
|
|
ddp
Moderator
|
14. November 2006 @ 18:33 |
Link to this message
|
|
fdisk is part of dos & has nothing to do with the cmos. do you or can you get a win98 or winme bootdisk & do you have a floppy drive?
|
|
bojan087
Member
|
14. November 2006 @ 18:35 |
Link to this message
|
|
i have a win 98 SE version and yes i can get a floppy drive in here, i just dont use it
|
|
ddp
Moderator
|
14. November 2006 @ 18:49 |
Link to this message
|
|
change the boot sequence to floppy, cdrom than hd. boot off the win98 boot disk & select no rom support. at the a:prompt, type fdisk & say yes to large drive. select 1 to create partition & yes to whole drive. at present don't worry if doesn't show proper size as problem is with win98. reboot & go thru same proceedure as before about no rom support. at a:prompt type format c: enter & say yes to format. don't worry about size till finished format as it should show proper size than. i did that on my 160gig wd hd but partitioned it as a 40 for windows & 120 for data.
|
|
bojan087
Member
|
14. November 2006 @ 18:56 |
Link to this message
|
|
ok i did the boot sequence first, floppy 1st, cd/dvd 2nd, hdd 3rd, insterted win 98, restarted, and got the same message error "reboot and select proper boot device..." after that i took out the hard drive totally so there would be no hard drives in teh computer and i got the same screen as before with the reboot and select proper boot device... now im not sure if its because its not formated or what, cuz under bios it told me that it had a 160gb hd. Edit: i also get the same message with my other 2 hard drives
This message has been edited since posting. Last time this message was edited on 14. November 2006 @ 18:57
|
|
Advertisement
|
|
|
|
ddp
Moderator
|
14. November 2006 @ 18:59 |
Link to this message
|
|
when it said 160gig hd, that was after you disconnected the wd?
|
