|
|
|
first fixation error, now 100% cpu usage, can't burn
|
|
Newbie
|
11. November 2006 @ 13:31 |
Link to this message
|
|
I have read forums for 2 days, I can't seem to find a direct answer, so maybe some nice person will help!
I have used dvdfab with dvdshrink for almost a year, burned about 150 staples dvds, NO problem (yes, I know, they are cheap, but they worked). Also, not knowing, I've ALWAYS ran programs in the background with no problem (office, internet explorer, etc.)
I started getting errors (probably based on the new copyright stuff, so I followed afterdawn advice and got rip4you/dvddecrypter/shrinkdvd, and quit running programs in the background. What a charm!!
Well, a few dvd's later, i started getting failed burns--would burn to 100% done, then the final step I'd get "fixation errors", I couldn't burn anything, so I followed advice posted and bought verbatim media. My first dvd burned fine. BUT my next attempt my cpu started bogging down to 100% usage, even opening task mgr took forever. After about 2 hours, it finally said it burned my dvd on the verbatim, but the finished disk was not usable/readable.
For the heck of it I tried using dvdfab, which had never used 100% cpu before and now IT was using up that also, so any dvd program I use COMPLETELY bogs down my computer, how can I stop this?? I don't know if I have the "fixation" error anymore because I don't have the patience to spend 3 hours doing one disc.
I have a lite-on dvd burner 16x, I'm semi-computer literate, heck, I've figured this much out, but honestly don't have anyone to help me! I can try to print logs if that helps, I really tried to read through all the posts, but couldn't find a real answer. thanks!
someonethatsit
|
|
Advertisement
|
 |
|
|
Moderator
|
11. November 2006 @ 14:36 |
Link to this message
|
Hi someoneth
Here's some suggestions that may help the cpu usage.
Keep on the the pc maintenace bit.
Weekly do a disc defrag, anti virus and spyware scans, run a registry cleaner like ccleaner. Use the cleaner and issues options.
Check and make sure all drives are in DMA mode - DMA should also be listed under 'current transfer mode'. Here's a guide:
http://forums.afterdawn.com/thread_view.cfm/260038
Have Nero? If you're autoburning w/ Shrink and not picking decrypter to burn then you should have a log that can help.
Post the last log. They are usually separated by something like
this: ========****Nero BurningRom History****========
You can find them here:
Nero 6 - program files>ahead>nero>nerohistory
Nero 7 - program files>nero>nero 7>core>nerohistory
Just be sure to edit out the serial # - usually begin w/ 1A,1C or 5C.
|
Newbie
|
11. November 2006 @ 17:23 |
Link to this message
|
I regularly defrag, virus, and spyware scan, i just looked at the dmi thing, both drivers have both "dma if available", the primary device 0 has ultra dma mode 5, but device 1 has "not applicable" under current transfer mode. For the secondary, has both dma if available, but "current transfer mode" for device 0 is pio mode and device 1 is ultra dma mode 4. The link you sent said just to uninstall if the "transfer mode" was pio, not the current transfer mode, did I read that right because it looked like you were telling me that everything should say dma??
Also, I did finally let ripit4me run from start to finish with monster house, it said it burned successfully, but again, my computer AND my dvd player won't play it. The computer at least recognizes it is a dvd and starts to open power dvd, but nothing will happen from there. Why does it say it burns successfully if nothing will read it
here is the last log that I just did where the disc finished "successfullly" but did not work (thanks, your instructions are very detailed--except if I should still uninstall those 2 devices because everything doesn't say dma:
[11.11.2006]------------------------------------
12:02:14 Robot error messages from:
====== *** NeroAPI, History File *** ======
## removed ##*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero API version: 6.3.1.26
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS05 - HA 1 TA 1 - 6.3.1.26
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080M0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 D: CDRom0
LITE-ON DVDRW SOHW-1673S E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 286MB (293196kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.11.2006
NeroAPI
7:38:27 PM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
7:38:27 PM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
7:38:27 PM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
7:38:28 PM #4 Text 0 File Reader.cpp, Line 126
Reader running
7:38:28 PM #5 Text 0 File Writer.cpp, Line 124
Writer LITE-ON DVDRW SOHW-1673S running
7:38:28 PM #6 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
7:38:28 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
7:38:28 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
7:38:28 PM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media
7:38:29 PM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286175 (508:02.25, 4465MB)
7:38:29 PM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
7:38:29 PM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
7:38:29 PM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:38:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2286176 (2286176) = #2286176/508:2.26
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286176 blocks [LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------
7:38:29 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682088448, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2286176 | lead-out | 1 | 0x00 | 0x41
7:38:33 PM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
7:38:33 PM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
7:38:33 PM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
7:38:33 PM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 16x (22,160 KB/s)
7:38:33 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:38:33 PM #21 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
7:38:33 PM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
7:44:38 PM #23 Text 0 File WriterStatus.cpp, Line 115
<LITE-ON DVDRW SOHW-1673S> start writing Lead-Out at LBA 2286176 (22E260h), lenght 0 blocks
7:44:38 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
7:45:51 PM #25 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 16x (22,160 KB/s)
7:45:52 PM #26 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
7:45:52 PM #27 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 12:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[11.11.2006]------------------------------------
19:38:27 Robot error messages from:
====== *** NeroAPI, History File *** ======
someonethatsit
|
Newbie
|
11. November 2006 @ 18:27 |
Link to this message
|
i went through nero's tool and neither one had dma, so I uninstalled both and now they looked fine, everything said dma (except the primary device 1 still said not applicable for current transfer--dont' know if that is a problem)
Anyway, I tried burning the files again (just opened up DVD Shrink and opened the file folder of a different movie that I also never got to burn, it said successfully burned, but again, my computer and dvd player cannot recognize and play it! I've also uninstalled and reinstalled all programs earlier today before I posted (nero/ripit4me/dvddecrypter/dvdshrink)
should i just give up and reformat my harddrive and start from scratch!!!
someonethatsit
|
Moderator
|
11. November 2006 @ 19:41 |
Link to this message
|
Hang tight on the reformat :)
Device 1 on the Primary showing not applicable is ok. No drive is attached to that port so nothing to report on.
You now have the one that was in PIO back in DMA as NeroToolKit reported so you're ok there too. That was helping the pc bog down.
When checking DMA mode look and have both 'transfer mode' - 'DMA available' and - 'Current Transfer Mode' Ultra DMA and a #'
Update the firmware on the LiteOn - you're a bit behind. The latest is JSOD:
http://www.liteonamericas.com/twnmain/DO...re/DR16JS0D.zip
Burn process completed successfully at 16x
You're using good media but let's burn these at 8x speed. Players can be very picky.
Nero API version: 6.3.1.26
Bit behind on Nero too - use this version - 6.6.0.18:
Package 1
http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
Package 2 (recode & vision)
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
With the updated Nero - Nero may automatically booktype these +R's to DVD-Rom which makes the player thinks it's a DVD-Rom - gives more compatability. Your drive supports this.
To see if it will go to Burning Rom (may need to have a blank disc in the drive) then choose recorder. There will be a options buttons - click it on and see if booktyping/bitsetting is there. If it is pick automatic.
I have a LiteOn a few models back from yours and I didn't have these options. I had to booktype thru NeroToolKit>CD-DVD Speed under bitsetting for every +R disc.
Now my new LiteOn - Nero does the automatic booktype to DVD-Rom.
When using Shrink look under the burn settings tab once you clicked backup. Shrink also has an option to check to booktype to DVD-Rom.
Now let's give all this a go & let us know!
|
Moderator
|
12. November 2006 @ 06:46 |
Link to this message
|
thread teleported to Nero forum
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Newbie
|
12. November 2006 @ 07:27 |
Link to this message
|
Ok, I did EVERYTHING you said, including the ccleaner, except try changing to 8x instead of 16x, I wasn't real sure how to do that. Also, If I read your post right, it said it was ok to leave the "book" whatever it was to say dvd- even though these are dvd+'s?? I didn't mess with that since it was ready to burn
Anyway, running dvddecrypter with ripit4me still runs at 100%, however, once I get to dvdshrink, it ran between 50-100 (looked like a heartbeat monitor spiking up and down every few seconds), Nero burned at an average of 10%. It "seemed" to burn fine, said it was successful, but again, NOT playable in either computer dvd player or my tv dvd player
First question, does dvddecrypter run that slow? or is that still a problem?
I would guess maybe there is something wrong with my dvd burner, but that doesn't explain all the slowness
And I guess the main question, why aren't the disks recognizable/playable? (sometimes when I put them in the computer dvd player, they will actually have the label "monster house" or whatever on the directory, but this last time, my computer won't even recognize there is a disk in the drive!
What else can I be doing wrong? I'm going to put in an old disk I know has burned in the past and try using just dvdshrink like the old days and see if it will burn properly.
Here is the log from the last unsuccessful "successfully burned" dvd!
(it might show where I stuck a cheapy staples disk in first, just as an experiment, but it wouldn't even pick up the disk as being in there, it did pick up the verbatim right away though!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <LITE-ON DVDRW SOHW-1673S>Version: JS0D - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080M0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SOHW-1673S atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B D: CDRom0
LITE-ON DVDRW SOHW-1673S E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 502MB (514124kB)
Free physical memory: 225MB (230840kB)
Memory in use : 55
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.11.2006
NeroAPI
9:45:16 AM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
9:45:16 AM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
9:45:16 AM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
9:45:17 AM #4 Text 0 File Reader.cpp, Line 127
Reader running
9:45:17 AM #5 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SOHW-1673S running
9:45:17 AM #6 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
9:45:17 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:45:18 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
9:45:18 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
9:48:35 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2219711 (493:16.11, 4335MB)
9:48:35 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
9:48:35 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SOHW-1673S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
9:48:35 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Insert empty disc to write to.
(Medium in drive: unknown. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD+R DL.)
9:48:35 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2219712 (2219712) = #2219712/493:16.12
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2219712 blocks [LITE-ON DVDRW SOHW-1673S]
--------------------------------------------------------------
9:48:35 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SOHW-1673S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4545970176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2219712 | lead-out | 1 | 0x41 | 0x00
9:48:35 AM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
9:48:35 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
9:48:35 AM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
9:48:35 AM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 16x (22,160 KB/s)
9:48:35 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:48:35 AM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
9:48:35 AM #22 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SOHW-1673S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0
9:48:35 AM #23 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
9:48:35 AM #24 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
9:54:33 AM #25 Text 0 File WriterStatus.cpp, Line 116
<LITE-ON DVDRW SOHW-1673S> start writing Lead-Out at LBA 2219712 (21DEC0h), lenght 0 blocks
9:54:33 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:54:45 AM #27 Text 0 File DVDR.cpp, Line 5876
Drive: LITE-ON DVDRW SOHW-1673S
Book Type request [LO], rev 3: DVD+R
Changing the Book Type was finished successfully, return code 0
9:54:45 AM #28 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 16x (22,160 KB/s)
9:54:46 AM #29 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
9:54:46 AM #30 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 12:07:32 PM
File 'Drivers\PXHELP20.SYS': Ver=2.03.16a, size=20576 bytes, created 8/2/2004 12:03:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
someonethatsit
|
Newbie
|
12. November 2006 @ 07:40 |
Link to this message
|
|
I just noticed the secondary changed itself back to pio for device 0, I swear I did not go in and change it!!! Is that normal to switch by itself? I just went in and uninstalled and reinstalled it like yesterday.
thanks again for all your help
someonethatsit
|
Newbie
|
12. November 2006 @ 08:06 |
Link to this message
|
|
ok forget reformatting, i'm ready to throw the computer out the window, in my last post, from the prior post, I realized the dma had switched back to current being pio, so I've followed the directions and uninstalled it twice reinstalled it and BOTH times it comes back with PIO Only and PIO Mode for both device 0 & 1 on the secondary, how do I get it to be dma again???!!! The primary seems to stay ok.
Also, I tried burning a "test" of an old scooby doo dvd that i've had for 2 years with just dvdshrink since I knew that worked at one time, it was encoding at 100% again, maybe that is due to the pio thing being messed up, so I just ended it until I can figure out how to get back to dma again.
someonethatsit
|
|
laddyboy
AfterDawn Addict
|
12. November 2006 @ 08:17 |
Link to this message
|
Hi.
You're still burning at 16X. Change the write speed to 8X or 4X. I'd try 4X to be safe.
It also appears there are a couple of versions of Nero mixed on our system. Did you run the Nero 6 Clean Tool before changing versions?
Drives will slip back into PIO mode from DMA mode if there are comm problems on the bus. It was your DVD reader (ROM) that slipped back into PIO mode, not your burner.
|
Newbie
|
12. November 2006 @ 08:18 |
Link to this message
|
|
ok, i did get the dma's back everywhere, and dvdshrink is running between 25-50%, much better than 100, scooby is about 1/2way encoded, so we'll see how that goes! Just wanted to let you know to ignore the dma/pio problem!
someonethatsit
|
Newbie
|
12. November 2006 @ 08:53 |
Link to this message
|
laddyboy, question on the Nero . . .
this is what binkie7 put:
Nero API version: 6.3.1.26
Bit behind on Nero too - use this version - 6.6.0.18:
Package 1
http://httpdl1.usw.nero.com/software/Ner....0.18_no_yt.exe
Package 2 (recode & vision)
http://httpdl1.usw.nero.com/software/Nero6/NVE-3.1.0.21_no_yt.exe
I downloaded & installed BOTH of these was that wrong??!! Also, no I did not use a "nero 6 clean tool" I did not know to do that.
I did finish the test run of burning my old scooby do (I left it at 16x and even used a staples dvd and it burned fine and is playable) I guess that is good news that my burner is not bad,
first- is there something different i need to do with Nero since i didn't run the clean tool (and where do i get the clean tool) and should I have only installed one of those two updates??
second- i'll try doing monster house with rip4me/dvddecrpyter at 4x if i can figure where to change the speed! thanks again for all your help and patience. I feel like I'm learning at least!
someonethatsit
|
Moderator
|
12. November 2006 @ 10:59 |
Link to this message
|
Hi someoneth
Your fine on the Nero - you now have the 6.6.0.18 version using the user interface of version 6.3.1.4.
If your reading from the dvd-rom drive when it's in PIO mode that would account for the high CPU usage.
When you use RipIt4Me you can change the burn speed when it gets to Shrink. Once you click 'back up' pick your drive under 'target device' then click on the 'burn settings' tab. You can change the speed there.
No problem on the help :)
Keep us posted!
|
Newbie
|
12. November 2006 @ 12:19 |
Link to this message
|
|
I have a usable Monster House copy! I did two things different this time.
I ran rip4me the wizard mode instead of 1click or whatever it is called, and did set the burn speed lower.
I do have one more question though
on shrinkdvd when I change the burn speed my options are as follows:
maximum
1.0x (1385kb's)
2.0x (2770kb's)
2.4x (3324kb's) (not a typo, option 3 says 2--unless those aren't numbering options before the x number)
that is exactly what the drop down menu reads. I picked the last one, but what the heck do the others mean with 0x?? and since I have a 16x burner, why doesn't it give me a ooption for doing an 8x burn?
I'm keeping my fingers crossed this is fixed, I REALLY appreciate your help! (and my kids do too!!)
someonethatsit
|
Moderator
|
12. November 2006 @ 13:20 |
Link to this message
|
Yea - good deal :)
The listings you have under burn speed are the different burn speeds -even the ones listed like 1.0 - just means 1x.
2 reasons you would have only these options is - 1) you don't have a blank in the drive or 2) you are reading & writing from the same drive.
Some drives will only list the supported write speeds of the source disc and max.
So for option 1 put the blank in 1st when you start RipIt4Me. For option 2 you can just have Shrink save to a hard drive folder. When done you can use Express in Nero and add the video_ts then burn. Your burn speeds to pick from will be listed on the last screen.
|
Newbie
|
13. November 2006 @ 05:29 |
Link to this message
|
one more question, although i haven't watched the new monster inc from start to finish, it does look like it works (on my dvd player only though), BUT it does NOT work on either dvd drive on my computer, it starts to load up, but then freezes up, i've tried it in two different programs to run (windows media player and power dvd), i read on a post that you can "check your new disk" in Nero, when i try this, it realizes there is a disk in there, but it doesn't run the check for good/bad, it just locks up.
Is there something i'm still not doing right? or should i just give up and be happy it will at least play on my tv??
thanks again!
someonethatsit
|
Moderator
|
13. November 2006 @ 14:49 |
Link to this message
|
|
Hi someoneth
No that really shouldn't happen - the burner at least should recognize the media it burned or a blank and the media id on it.
Your using good media too.
Then you have the one drive reverting back to pio mode. Something could be up with the ide cable but I don't think that would case the disc not being recognized in the burner.
Do you have another pc you can try this burner in?
Another cheap option may be to use a dvd lens cleaner on them or blow some canned air in them. Dust can build up on the lens and cause problems.
|
Newbie
|
13. November 2006 @ 16:18 |
Link to this message
|
|
I'm sure cleaning would be a good idea, we live in the desert, very dusty!!
what is a good type of lens cleaner? i've seen disks in stores that you put that cleaner fluid on and spin, is that what you recommend? (Not to sound dumb, but I'm not really even sure where the lens is in the dvd drive!!
Thanks again for all your help! (no, I don't have another pc with a burner)
someonethatsit
|
|
Advertisement
|
|
|
Moderator
|
13. November 2006 @ 16:39 |
Link to this message
|
I just use the ones that have a small soft brush on the dvd - you can pick them up at like Best Buy, Office Depot, Staples etc.
Good for dvd players too even if it's doesn't help the drive.
Give it a whirl - may help.
The dvd rom not reading (almost forgot) may need a firmware update to to help read these. This drive come with the pc? Who's the manufacturer of the pc?
You can check which version you have in Nero. Go to ToolKit>InfoTool. Pick the DVD-Rom drive in the drop down. Then click on the drive tab. There's a field there that lists the firmware version.
|
|
