|
|
|
Burning Problems
|
|
|
tydytao
Newbie
|
9. December 2006 @ 11:37 |
Link to this message
|
Hey everyone,
Every disk im burning right now, shows up like this:
http://img19.imageshack.us/img19/7241/rawrtg4.jpg
There is that little circle line there, and the DVD is at least 3g. When I try to play it, it freezes up. Does anybody know if this is a program problem, Burner hardware problem, or the DVD Disk itself? This just started happening when i switched to a new spindle of DVDs, but 1 out of 4 or so would work. [/url]
This message has been edited since posting. Last time this message was edited on 9. December 2006 @ 14:12
|
|
Advertisement
|
 |
|
|
Moderator
|
9. December 2006 @ 12:37 |
Link to this message
|
|
Hi tydytao
Might just be the discs themselves. Which brand are you using like Sony +R 16x?
To rule out the burner a couple of things to try:
°If you have another burner - try that one and see if you have the same problem.
°Try another brand of media - like Verbatim or made in Japan Sony, Fuji or Maxell.
|
|
tydytao
Newbie
|
9. December 2006 @ 13:05 |
Link to this message
|
|
Hello Binkie,
This is a WINDATA DVD. The spindle i used before was also Windata, but the top of it wasnt the same.
I dont have another burner, nor any other disks ATM. I wanted to find out what it can be before i go out and buy something.
Thank you for the help.
|
Moderator
|
9. December 2006 @ 14:57 |
Link to this message
|
|
Not a problem there tydytao
Windata uses different manufacturers some good some bad so this batch may be made by one of the iffy manufacturers.
Can be hit or miss on who you get so try the ones listed above.
|
|
tydytao
Newbie
|
9. December 2006 @ 15:13 |
Link to this message
|
|
Alright I will try a new DVD. Thank you
|
|
tydytao
Newbie
|
16. December 2006 @ 12:36 |
Link to this message
|
hello again,
I just tried burning something else, after a couple days, and this error message turned up. is this related to my problem or is it something else?
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <_NEC DVD+RW ND-1100A> Version: 1.90 - HA 1 TA 1 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 2 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 2 ID 1 DMA: On
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 3 ID 0 DMA: On
DiskPeripheral : ST3160023A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FK2731M UYC185I 2.0B vaxscsi Port 4 ID 0 DMA: Off
CdRomPeripheral : GE3049V AYF305C 1.0 dtscsi Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T E: CDRom0
_NEC DVD+RW ND-1100A F: CDRom1
FK2731M UYC185I G: CDRom2
GE3049V AYF305C I: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046956kB)
Free physical memory: 576MB (590428kB)
Memory in use : 43 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.12.2006
NeroAPI
3:11:50 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
3:11:50 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
3:11:50 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
3:11:50 PM #4 SPTI -1065 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03cc9e00: Len x6
3:11:50 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
3:11:50 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
3:11:50 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: _NEC DVD+RW ND-1100A running
3:11:50 PM #8 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
3:11:50 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:11:50 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
3:11:50 PM #11 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
3:11:51 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
3:11:51 PM #13 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
3:11:51 PM #14 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+R
3:11:51 PM #15 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:11:51 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [F: _NEC DVD+RW ND-1100A]
--------------------------------------------------------------
3:11:51 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: _NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
3:11:51 PM #18 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
3:11:51 PM #19 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
3:11:51 PM #20 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
3:11:51 PM #21 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
3:11:51 PM #22 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
3:11:51 PM #23 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
3:11:51 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:11:51 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x03cd4600: Len x804
3:11:51 PM #26 SPTI -1065 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03cc9e00: Len x6
3:11:51 PM #27 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
3:17:50 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 08 55 A0 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x00bc0000: Len x10000
0x00 00 01 BA 44 37 AC D0 DC 6B 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 7B 48 07 D1 D7 41 F6 BA 85
0x8B 3E D2 88 6D 4D 30 F0 91 32 9B 2F C4 71 04 EB
3:17:50 PM #29 CDR -1135 File Writer.cpp, Line 302
Write error
F: _NEC DVD+RW ND-1100A
3:17:50 PM #30 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:17:50 PM #31 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
3:17:51 PM #32 SPTI -1135 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
3:17:51 PM #33 SPTI -1176 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
3:17:51 PM #34 SPTI -1065 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x03cc9e00: Len x6
3:17:51 PM #35 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
F: _NEC DVD+RW ND-1100A
3:17:51 PM #36 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
3:17:51 PM #37 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
3:17:51 PM #38 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
3:17:51 PM #39 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/19/2005 5:00:00 PM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 2:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 22. December 2006 @ 13:02
|
Moderator
|
16. December 2006 @ 13:19 |
Link to this message
|
Hi tydytao
May be related. Your NEC is an older one but it can use a firmware update so let's try that 1st. The latest is 1.93.
The log only show the media as +R - still using the Windata or which ones are you using?
Nero API version: 7.2.3.2
Nero can use an update too - the latest is 7.5.0.9a.
May or may not help this issue but 7.5.0.9a is a better version.
File 'Drivers\CDRALW2K.SYS
Nero and Roxio don't always play well so if the above fails may want to uninstall it and run the zap tool.
Give that a go and keep us posted.
|
|
tydytao
Newbie
|
16. December 2006 @ 13:38 |
Link to this message
|
I'm still using the same media. I'll update the Nero version. Thanks. I also ran the Roxio Zap. It's been uninstalled for a while.
Thanks, i'll post back after i try more burnings.
Hi tydytao
The log only show the media as +R - still using the Windata or which ones are you using?
Nero API version: 7.2.3.2
Nero can use an update too - the latest is 7.5.0.9a.
May or may not help this issue but 7.5.0.9a is a better version.
File 'Drivers\CDRALW2K.SYS
Nero and Roxio don't always play well so if the above fails may want to uninstall it and run the zap tool.
Give that a go and keep us posted.
|
Moderator
|
16. December 2006 @ 13:48 |
Link to this message
|
|
Ok - since it's been uninstalled then the zap tool should just rid of that Roxio driver shown in the log.
Let's us know how it goes.
edit to add: Update the firmware for the burner too.
This message has been edited since posting. Last time this message was edited on 16. December 2006 @ 13:49
|
|
tydytao
Newbie
|
17. December 2006 @ 09:09 |
Link to this message
|
Alright I just tried a different media, the only other one i have. It's a Hypermedia DVD+RW
It looks like the same type of error comming up:
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <_NEC DVD+RW ND-1100A> Version: 1.93 - HA 1 TA 1 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 2 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-1100A atapi Port 2 ID 1 DMA: On
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 3 ID 0 DMA: On
DiskPeripheral : ST3160023A atapi Port 3 ID 1 DMA: On
CdRomPeripheral : FK2731M UYC185I 2.0B vaxscsi Port 4 ID 0 DMA: Off
CdRomPeripheral : GE3049V AYF305C 1.0 dtscsi Port 5 ID 0 DMA: Off
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T E: CDRom0
_NEC DVD+RW ND-1100A F: CDRom1
FK2731M UYC185I G: CDRom2
GE3049V AYF305C I: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046956kB)
Free physical memory: 518MB (531352kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.12.2006
NeroAPI
1:56:29 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
1:56:29 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
1:56:29 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
1:56:30 PM #4 SPTI -1065 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 00 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04f29e00: Len x6
1:56:30 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
1:56:30 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
1:56:30 PM #7 Text 0 File Writer.cpp, Line 113
Writer F: _NEC DVD+RW ND-1100A running
1:56:30 PM #8 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
1:56:30 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:56:30 PM #10 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:56:30 PM #11 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
1:56:30 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
1:56:30 PM #13 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
1:56:30 PM #14 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: _NEC DVD+RW ND-1100A, Media type: DVD+RW
1:56:30 PM #15 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:56:30 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [F: _NEC DVD+RW ND-1100A]
--------------------------------------------------------------
1:56:30 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: _NEC DVD+RW ND-1100A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
1:56:30 PM #18 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:56:30 PM #19 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:56:30 PM #20 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
1:56:30 PM #21 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
1:56:30 PM #22 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
1:56:30 PM #23 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
1:56:30 PM #24 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:56:30 PM #25 SPTI -1066 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x04f34600: Len x804
1:56:30 PM #26 SPTI -1065 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 00 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04f29e00: Len x6
1:56:30 PM #27 Phase 98 File APIProgress.cpp, Line 278
Start formatting disc before burning
1:57:14 PM #28 Phase 100 File APIProgress.cpp, Line 278
Formatting disc was successful
1:57:17 PM #29 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
2:03:00 PM #30 SPTI -500 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 08 3F 40 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x00c80000: Len x10000
0x00 00 01 BA 44 35 9E 17 8C 13 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 18 01 62 1D F7 01 CB 66 73
0x86 8D 03 B2 0B C0 24 41 FD 2A C3 80 ED 94 5F C8
2:03:17 PM #31 SPTI -500 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x00) WinError(1117) NeroError(-500)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 08 3F 40 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x04fd6000: Len x10000
0x00 00 01 BA 44 35 9E 17 8C 13 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 18 01 62 1D F7 01 CB 66 73
0x86 8D 03 B2 0B C0 24 41 FD 2A C3 80 ED 94 5F C8
2:03:17 PM #32 Text 0 File MMC.cpp, Line 19747
Writer-Buffer for F: _NEC DVD+RW ND-1100A reduced to 32768Bytes
2:03:17 PM #33 SPTI -1114 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1114)
Sense Key: 0x06 (KEY_UNIT_ATTENTION)
Sense Code: 0x29
Sense Qual: 0x00
CDB Data: 0x2A 00 00 08 3F 40 00 00 10 00 00 00
Sense Area: 0x70 00 06 00 00 00 00 0A 00 00 00 00 29
Buffer x04fb5200: Len x8000
0x00 00 01 BA 44 35 9E 17 8C 13 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 18 01 62 1D F7 01 CB 66 73
0x86 8D 03 B2 0B C0 24 41 FD 2A C3 80 ED 94 5F C8
2:03:17 PM #34 CDR -1114 File Writer.cpp, Line 302
Reset occurred
F: _NEC DVD+RW ND-1100A
2:03:17 PM #35 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:03:17 PM #36 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
2:03:17 PM #37 Text 0 File DVDPlusRW.cpp, Line 875
Media-Format will be stopped after burning
2:03:17 PM #38 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
2:04:12 PM #39 SPTI -1065 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 00 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x04f29e00: Len x6
2:04:12 PM #40 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
2:04:12 PM #41 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:04:12 PM #42 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 2:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Is media still a possibility of the problem? Or is it more torwards my Drive now?
|
Moderator
|
17. December 2006 @ 12:15 |
Link to this message
|
Well neither Kypermedia or Windata are great but combined w/ this being an older burner - only supports +R at 4x & +RW at 2.4x I'd get a new one. Good ones are so much cheaper now.
Newer drives support all format like +/- R/RW and -/+ R Dual Layer going to a max burn speed of 18x depending on the format.
In this new log you're also getting this - Reset occurred & KEY_UNIT_ATTENTION o it's probably on it's last legs and might just be the reason you have those rings in the ones that did burn.
At some point update Nero to the latest version. But 1st do a clean install - looks like you still have some of Nero 6 left Using interface version: 6.3.1.4
Uninstall Nero, run the Clean Tool. Reboot.
Now run a registry cleaner like the free ccleaner. Use the issues and cleaner options.
Reinstall Nero.
Until you get another drive may want to also give ImgBurn a try. It's free.
To burn these dvd's use the build mode and add the files or video_ts folder.
|
|
tydytao
Newbie
|
17. December 2006 @ 12:18 |
Link to this message
|
|
Alright ill try ImgBurn. Do you have any suggestions for a new burner?
|
Moderator
|
17. December 2006 @ 12:33 |
Link to this message
|
|
Good burners would be LiteOn, Plextor (most expensive), Pioneer or another NEC.
If you're in the US check out newegg.com - all but the Plextor can be had for around $30-$35.
|
|
tydytao
Newbie
|
17. December 2006 @ 12:43 |
Link to this message
|
|
alright, thank you
|
Moderator
|
17. December 2006 @ 12:50 |
Link to this message
|
|
Not a problem tydytao
Keep us posted or if you need some more help picking out a drive just let us know!
|
AfterDawn Addict
|
17. December 2006 @ 13:16 |
Link to this message
|
|
And MOST of all get yourself some decent media. Taiyo Yudens , Verbatims, Made in Japan Sonys, Maxells.
|
|
tydytao
Newbie
|
17. December 2006 @ 14:18 |
Link to this message
|
|
alright garmoon. I'm a little on the poor side, so i stay away from the expensive brands
Binkie-i'm looking torwards LiteOn. What's the difference between lightscribe drives and non lightscribe drives?
|
Moderator
|
17. December 2006 @ 14:29 |
Link to this message
|
|
Actually tydytao the good stuff is just as much as the bad stuff :)
Best Buy has Verbatim on sale 50 for 12.99. But for your current burner I wouldn't use them cause they're usually 16x and may be hit or miss on your burner. A new one different story.
LighScribe just means it will etch a picture/image on lightscribe media which is more then 'regular' media. I have it on 1 drive but have never used it. I prefer the inkjet printable discs that I use an Epson to on.
Which model #'s were you looking at?
|
|
tydytao
Newbie
|
17. December 2006 @ 15:30 |
Link to this message
|
|
Hmm really. Ive never seen much DVDs 50 for 12.99. I'll give it a look, thanks.
I was looking at SOHW-1673SU EZ Dub and the LH-20A1H. I'm more torwards the LH-20A1H
Do internal drives work better than external drive or vice versa?
|
Moderator
|
17. December 2006 @ 16:16 |
Link to this message
|
|
Internal and external are about the same. Just have more flexiblity like moving the external to a different pc.
Wow- now that's the 1st I've seen an 20x burner! Personally I would look at 18x or 16x ones - 20x is brand new to the market and may still need a little work. I could be off base her though.
Yeah on the media just check the weekly sales - usually something good on sale for good prices. I buy most of media online Taiyo Yuden (best) from supermediastore.com but when the Verbatim's go on sale pick up a pack of those 2.
|
|
tydytao
Newbie
|
22. December 2006 @ 11:38 |
Link to this message
|
Hello Binky
I got that 20x LiteOn. Just tried burning something, and this is the result:
Quote:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Nero\Nero 7\Core\
Application: ahead\Nero - Burning Rom
Internal Version: 7, 2, 3, 2
Recorder: <LITE-ON DVDRW LH-20A1H> Version: LL05 - HA 1 TA 1 - 7.2.3.2
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG DVD-ROM SD-616T atapi Port 2 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-20A1H atapi Port 2 ID 1 DMA: On
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 3 ID 0 DMA: Off
DiskPeripheral : ST3160023A atapi Port 3 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616T E: CDRom0
LITE-ON DVDRW LH-20A1H F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1022MB (1046956kB)
Free physical memory: 362MB (371260kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
22.12.2006
NeroAPI
4:27:41 PM #1 Phase 112 File APIProgress.cpp, Line 278
DVD-Video files reallocation started
4:27:41 PM #2 Phase 114 File APIProgress.cpp, Line 278
DVD-Video files reallocation completed (no file modified)
4:27:41 PM #3 Phase 111 File APIProgress.cpp, Line 278
DVD-Video files sorted
4:27:43 PM #4 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
4:27:43 PM #5 Text 0 File Reader.cpp, Line 124
Reader running
4:27:43 PM #6 Text 0 File Writer.cpp, Line 113
Writer F: LITE-ON DVDRW LH-20A1H running
4:27:43 PM #7 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
4:27:43 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:27:43 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
4:27:43 PM #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
4:27:44 PM #11 Text 0 File DlgWaitCD.cpp, Line 289
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286127 (508:01.52, 4465MB)
4:27:44 PM #12 Text 0 File DlgWaitCD.cpp, Line 301
Write in overburning mode: NO
4:27:45 PM #13 Text 0 File DlgWaitCD.cpp, Line 2715
Recorder: LITE-ON DVDRW LH-20A1H, Media type: DVD+R
Disc Manufacturer ID: AML, Media Type ID: 002, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
4:27:45 PM #14 Text 0 File DlgWaitCD.cpp, Line 473
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:27:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286128 (2286128) = #2286128/508:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286128 blocks [F: LITE-ON DVDRW LH-20A1H]
--------------------------------------------------------------
4:27:45 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [F: LITE-ON DVDRW LH-20A1H] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681990144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286128 | lead-out | 1 | 0x41 | 0x00
4:27:45 PM #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
4:27:45 PM #18 Text 0 File SCSIPassThrough.cpp, Line 84
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
4:27:45 PM #19 Phase 24 File APIProgress.cpp, Line 278
Caching of files started
4:27:45 PM #20 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
4:27:45 PM #21 Phase 25 File APIProgress.cpp, Line 278
Caching of files completed
4:27:45 PM #22 Phase 36 File APIProgress.cpp, Line 278
Burn process started at 2.4x (3,324 KB/s)
4:27:46 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:27:46 PM #24 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: AML.....
Media type ID: 002
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 41 4D 4C 00 00 - 00 00 00 30 30 32 00 38 ...AML.....002.8
23 54 37 10 02 4E 72 02 - 8C 63 16 16 0B 0B 0A 0A #T7..Nr..c......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
4:27:46 PM #25 Text 0 File DVDPlusRW.cpp, Line 650
Start write address at LBA 0
DVD high compatibility mode: Yes
4:28:45 PM #26 SPTI -1106 File SCSIPassThrough.cpp, Line 291
F: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x00fb0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
4:28:45 PM #27 CDR -1106 File Writer.cpp, Line 302
Power calibration error
F: LITE-ON DVDRW LH-20A1H
4:28:45 PM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:28:46 PM #29 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:28:46 PM #30 Phase 127 File APIProgress.cpp, Line 278
Generating DVD high compatibility borders
4:28:46 PM #31 Phase 129 File APIProgress.cpp, Line 278
Generating DVD borders completed successfully
4:28:46 PM #32 Phase 38 File APIProgress.cpp, Line 278
Burn process failed at 2.4x (3,324 KB/s)
4:28:46 PM #33 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
4:28:46 PM #34 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/5/2002 2:16:52 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/24/2006 10:47:00 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
I'm guessing it's media problem? Still the same one.
This message has been edited since posting. Last time this message was edited on 22. December 2006 @ 13:00
|
Moderator
|
22. December 2006 @ 12:36 |
Link to this message
|
Hey tydytao
Let's edit out the serial # at the top of the log - begins w/ 1C. Don't need someone else using it.
Maybe a media problem - the media id is now in the log. The Windata you are using made by AML - not the best at all.
But you also have a power calibration error. Media and/or firmware can be a cause. The media is poor and the firmware is current.
When you installed the drive - is it on it's own power connection?
Not split or sharing with something else? (another reason for a power calibration error - shared power connection).
Nero API version: 7.2.3.2
Using interface version: 6.3.1.4
Do the clean install of Nero now too. See post above for links.
Since this is a newer drive Nero doesn't fully it - you see this in the log Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
A Nero update may help this.
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 3 ID 0 DMA: Off
One of your hard drives need DMA mode turned back on. Here's a guide.
Give those a go and let us know.
|
|
tydytao
Newbie
|
22. December 2006 @ 12:46 |
Link to this message
|
Hi binkie,
That's weird. Following the guide, all DMA is turned on. Would it being off cause problems?
The drive is sharing power, with another DVD-ROM drive. Should I remove it?
Yea sorry, I keep forgetting about the new Nero installation.
I realized I had the serial number up after i posted. I wanted to remove it, but I dont have the option of editing my posts. Sorry, I'll remember next time
|
Moderator
|
22. December 2006 @ 13:00 |
Link to this message
|
You should have the option to edit the post - look to the right and you should see this 
If you're transferring data/files etc from that hard drive - yes it could - different transfer rate. The hard drive was in the much slower PIO mode.
Yep you need to stop the power sharing :). Each drive should be on it's own connection to power supply. That may just be the main cause for this burn failure.
Have any extras you can use?
|
|
Advertisement
|
|
|
|
tydytao
Newbie
|
22. December 2006 @ 13:02 |
Link to this message
|
alright ill take the power share off when i finish updating Nero
you have any idea what DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 3 ID 0 is?
|
|
