|
|
|
Nero Express 6 Error
|
|
|
dbkid13
Newbie
|
15. December 2006 @ 18:14 |
Link to this message
|
Hey guys,
I have burned about 500 Dvd's with my benq1620 dvd burner. However recentley I have began getting a lot of coasters. The dvd's get between 10-50% done and then error. I have tried using 3 different programs (Nero, DVD Shrink, and sonic), two different media (Verbatium and Arita) and 3 speeds 4x, 8x, and 16x. All combinations lead to the same performance. My computer is a 2.0 GHZ Pentium 4 with 512 Mb ram. If you have any other questions please ask. I have been battling this for nearly 25 discs. I FEAR MY BURNER IS DYING. Thanks and here is my error log.
Snow
Realistic
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 5:33:44 PM
Nero version: 6.3.1.25 (Nero Express)
Recorder: <BENQ DVD DD DW1620> Version: B7U9 - HA 1 TA 0 - 6.3.1.25
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI GD-2000 >Version: 0056 - HA 1 TA 1 - 6.3.1.25
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST330013A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HITACHI GD-2000 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
HITACHI GD-2000 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522712kB)
Free physical memory: 233MB (239560kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.12.2006
ISO compilation
10:59:26 PM #1 Text 0 File Isodoc.cpp, Line 6083
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:59:26 PM #2 Text 0 File Reader.cpp, Line 126
Reader running
10:59:26 PM #3 Text 0 File Writer.cpp, Line 124
Writer BENQ DVD DD DW1620 running
10:59:26 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
10:59:26 PM #5 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-at-once, using DVD media
10:59:27 PM #6 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2285791 (507:57.16, 4464MB)
10:59:27 PM #7 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO (enabled: CD)
10:59:27 PM #8 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: BENQ DVD DD DW1620, Media type: DVD+R
10:59:27 PM #9 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:59:27 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2285792 (2285792) = #2285792/507:57.17
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2285792 blocks [BENQ DVD DD DW1620 ]
--------------------------------------------------------------
10:59:27 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [BENQ DVD DD DW1620 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681302016, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2285792 | lead-out | 1 | 0x00 | 0x41
10:59:27 PM #12 Phase 24 File dlgbrnst.cpp, Line 1855
Caching of files started
10:59:27 PM #13 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
10:59:27 PM #14 Phase 25 File dlgbrnst.cpp, Line 1855
Caching of files completed
10:59:27 PM #15 Phase 36 File dlgbrnst.cpp, Line 1855
Burn process started at 8x (11,080 KB/s)
10:59:27 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:59:27 PM #17 SCSI -1066 File Cdrdrv.cpp, Line 1191
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x030C5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
10:59:27 PM #18 CDR -1207 File DVDR.cpp, Line 4509
Book Type automatically set to: DVD-ROM
10:59:27 PM #19 Text 0 File DVDR.cpp, Line 5297
Drive: BENQ DVD DD DW1620
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
10:59:27 PM #20 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 7:11,275 (431275ms) -> OK
10:59:27 PM #21 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
11:02:15 PM #22 SCSI -1135 File Cdrdrv.cpp, Line 1445
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0A0B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x02 0xDA 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
11:02:15 PM #23 CDR -1135 File Writer.cpp, Line 304
Write error
11:02:15 PM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
11:02:15 PM #25 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
11:02:18 PM #26 Phase 127 File dlgbrnst.cpp, Line 1855
Generating DVD high compatibility borders
11:03:09 PM #27 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
11:03:09 PM #28 Phase 129 File dlgbrnst.cpp, Line 1855
Generating DVD borders completed successfully
11:03:09 PM #29 Text 0 File DVDR.cpp, Line 5297
Drive: BENQ DVD DD DW1620
Book Type request: DVD-ROM
Changing the Book Type was finished successfully, return code 0
11:03:09 PM #30 Text 0 File dlgbrnst.cpp, Line 1713
Set remaining time: 0:00,000 (0ms) -> OK
11:03:09 PM #31 Phase 38 File dlgbrnst.cpp, Line 1855
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
Moderator
|
15. December 2006 @ 18:34 |
Link to this message
|
Hi dbkid13
Here's 2 suggestions for you:
Recorder: <BENQ DVD DD DW1620> Version: B7U9
Update your firmware to the latest one -
B7W9
Right now all that's showing in the log is Media type: DVD+R . No media info listed. Firmware update may help this.
Nero version: 6.3.1.25
Update Nero to 6.6.0.18.
Package 1
Package 2 (recode, vision)
Give those a go and let us know.
|
|
dbkid13
Newbie
|
15. December 2006 @ 18:48 |
Link to this message
|
Thanks for the quick update, downloaded and installed the firmware and now downloading the Nero stuff. I have dsl so it will be a while. I will give an update as soon as I get there.
I downloaded version 6.6.1.4 before you posted, is there a difference between that and 6.6.0.18, or is the one just a little newer.
Sam
This message has been edited since posting. Last time this message was edited on 15. December 2006 @ 18:51
|
Moderator
|
15. December 2006 @ 19:01 |
Link to this message
|
|
Go with 6.6.0.18 - it's the last version of 6 that autoburns w/ Shrink.
Shrink doesn't have it's own burn engine so it's uses Nero's.
So if you install 6.6.1.4 and use Shrink picking your burner under 'select backup target' you'll get a 'cannot connect to trf' error.
|
|
dbkid13
Newbie
|
15. December 2006 @ 19:32 |
Link to this message
|
Installed both Nero updates (downloading older one now) and firm ware. Now the dvd burnder got 95% of the way throught the movie started making some weird noises and gave me this.
Snow
Realistic
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 0 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HITACHI GD-2000 >Version: 0056 - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST330013A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HITACHI GD-2000 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
HITACHI GD-2000 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522712kB)
Free physical memory: 29MB (30640kB)
Memory in use : 94 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.12.2006
UDF/ISO compilation
12:14:05 AM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
12:14:05 AM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
12:14:05 AM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
12:14:05 AM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
12:14:05 AM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 262144KB of Memory
12:14:05 AM #6 Text 0 File Reader.cpp, Line 124
Reader running
12:14:05 AM #7 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DD DW1620 running
12:14:05 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:14:05 AM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:14:05 AM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
12:14:06 AM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
12:14:06 AM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:14:06 AM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: BENQ DVD DD DW1620, Media type: DVD+R
12:14:06 AM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:14:06 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [BENQ DVD DD DW1620]
--------------------------------------------------------------
12:14:06 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286160 | lead-out | 1 | 0x41 | 0x00
12:14:06 AM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:14:06 AM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:14:06 AM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
12:14:06 AM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
12:14:06 AM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
12:14:06 AM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 16x (22,160 KB/s)
12:14:06 AM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:14:06 AM #24 SPTI -1066 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24
Buffer x076b0600: Len x804
12:14:06 AM #25 CDR -1207 File DVDR.cpp, Line 5463
Book Type automatically set to: Current recorder setting
12:14:06 AM #26 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
12:31:46 AM #27 Text 0 File WriterStatus.cpp, Line 116
<BENQ DVD DD DW1620 > start writing Lead-Out at LBA 2286160 (22E250h), lenght 0 blocks
12:31:46 AM #28 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
12:32:46 AM #29 SPTI -1176 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 72 01
12:32:46 AM #30 SPTI -1169 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0xFF 10 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 04 08
Buffer x02d85200: Len x6
12:32:46 AM #31 CDR -1176 File ThreadedTransferInterface.cpp, Line 1937
Session fixation error
D: BENQ DVD DD DW1620
12:32:46 AM #32 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1937
Could not perform end of Disc-at-once
12:32:46 AM #33 SPTI -1169 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1169)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x35 02 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 12 00 00 00 00 04 08
12:33:18 AM #34 SPTI -1176 File SCSIPassThrough.cpp, Line 289
D: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x72
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 03 00 00 00 00 12 00 00 00 00 72 01
12:33:18 AM #35 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders
12:33:30 AM #36 Phase 129 File dlgbrnst.cpp, Line 1685
Generating DVD borders completed successfully
12:33:30 AM #37 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 16x (22,160 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 2:02:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
ANY MORE IDEAS??
|
Moderator
|
15. December 2006 @ 19:47 |
Link to this message
|
Ok since you now have 6.6.1.4 installed - when you go back to 6.6.0.18 you'll need to uninstall Nero and run the Clean Tool then install 6.6.0.18.
But 1st the burn error - this last one you almost made it.
Which discs were you using? Stick with the Verbs over the Arita.
Physical memory : 510MB
Free physical memory: 29MB
Memory in use : 94 %
Way to low on memory on this log. So no multitasking and close any unneeded programs.
Burn process failed at 16x
Take it to 8x.
Still fails using the Verbs then try this free burning program - ImgBurn.
Use the build mode to burn the files.
|
|
dbkid13
Newbie
|
16. December 2006 @ 05:28 |
Link to this message
|
Okay, I tried a few more times and got more coasters. I restarted my computer and turned off everything so I had lots of memory avialable. I REALLY THINK THAT MY BURNER IS DYING. Because it was working fine and now its having trouble. Here our my latest error reports.
Snow
Realistic
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <BENQ DVD DD DW1620> Version: B7W9 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <HITACHI GD-2000 >Version: 0056 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST330013A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : BENQ DVD DD DW1620 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HITACHI GD-2000 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
BENQ DVD DD DW1620 D: CDRom0
HITACHI GD-2000 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (522712kB)
Free physical memory: 239MB (245400kB)
Memory in use : 53 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.12.2006
UDF/ISO compilation
1:04:52 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
1:04:52 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
1:04:52 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
1:04:52 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
1:04:52 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
1:04:52 AM #6 Text 0 File Writer.cpp, Line 122
Writer BENQ DVD DD DW1620 running
1:04:52 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:04:52 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
1:04:52 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
1:04:52 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2286159 (508:02.09, 4465MB)
1:04:52 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
1:04:52 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: BENQ DVD DD DW1620, Media type: DVD+R
1:04:52 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:04:52 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286160 (2286160) = #2286160/508:2.10
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286160 blocks [BENQ DVD DD DW1620]
--------------------------------------------------------------
1:04:52 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [BENQ DVD DD DW1620] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4682055680, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286160 | lead-out | 1 | 0x41 | 0x00
1:04:53 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
1:04:53 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
1:04:53 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
1:04:53 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
1:04:53 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:04:53 AM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0BBC0600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x24 0x00
1:04:53 AM #22 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: Current recorder setting
1:04:53 AM #23 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
1:12:55 AM #24 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0B540000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x10 0xA6 0x80 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x12
0x00 0x00 0x00 0x00 0x0C 0x00
1:12:55 AM #25 CDR -1135 File Writer.cpp, Line 311
Write error
1:12:55 AM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:12:55 AM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
1:14:38 AM #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.72a, size=20368 bytes, created 4/22/2004 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.1106 (xpsp1.020828-1920), size=86912 bytes, created 8/29/2002 4:00:00 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
16. December 2006 @ 05:49 |
Link to this message
|
You've probably wasted enough discs to pay for a new burner. Since you have been having no problem before with all the burns, I imagine it's your burner too.
@Binkie7
With my Benq 1650s all it says in the logs is +R media. But I know the burners knows the media, because it lists all the brands I'm using in QSuite. My firmware is the very latest also. I think this a trend in Benq burners with Nero 6.6. Does anyone else get all the Info in their Nero log with a BenQ? I'm using Nero 66018. Have seen others complaining about this.
|
|
dbkid13
Newbie
|
16. December 2006 @ 06:22 |
Link to this message
|
|
Well it looks like my burner was on its last leg. It just made some wierd noises durning my last burn and now wont eject or do anything. Its time to search for a new one (this ones 2 years old). I am thinking Nec3500 but unsure of what all is out there anymore since I have not been in the market for two years. Any good review sites???
|
AfterDawn Addict
|
16. December 2006 @ 08:12 |
Link to this message
|
|
|
Advertisement
|
|
|
Moderator
|
16. December 2006 @ 08:51 |
Link to this message
|
|
@garmoon
You coud be right about the media not showing up on the BenQ even though it recognizes it. See that in a few NEC's too.
Plus don't see many BenQ having burn problems.
Just a bit annoying when you trying to read a log :) Darn them!
@dbkid13
Yep sounds like it's on it's last legs since it's making noises and not wanting to eject the disc.
Another one to add is LiteOn - booktype right out of the box just like the BenQ.
If your in the US check out newegg.com
Keep us posted!
|
|
