|
|
|
Notebook Burn/Rip Issue
|
|
Junior Member
|
20. December 2006 @ 22:27 |
Link to this message
|
I seem to have an issue in either the burning or the ripping part of backing up movies. I am not sure which it is, because after I am done burning it the movie either does not work (not even able to be read in the DVD player), or the whole movie is full of skips. I've tried multiple programs, multiple media. I use DVD Shrink normally, if that fails, I use it along with AnyDVD, if that fails, I try different variations often looked up on this website. I use DVD Shrink to burn the DVDs as well.
Any suggestions would be appreciated.
|
|
Advertisement
|
|
|
|
Moderator
|
21. December 2006 @ 02:41 |
Link to this message
|
what burning program are you using ?..
..however that link has to come out of the signature - 
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Junior Member
|
21. December 2006 @ 06:19 |
Link to this message
|
My bad about the link.
I use Nero
|
Moderator
|
21. December 2006 @ 06:59 |
Link to this message
|
cool..
thread teleported to Nero forum.
if it's Nero 6, let's have LAST section of your Nero log which lives in c:\program files\ahead\nero\nerohistory.log but DO NOT post your serial number which usually begins with '1A21' or similar.
if it's Nero 7, let's have LAST section of your Nero log which lives in C:\Program Files\Nero\Nero 7\Core\NeroHistory but DO NOT post your serial number which usually begins with '5C80' or similar.
Either way you can differentiate sections via this section divider "====== *** Nero-Burning Rom, History File *** ======"
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 21. December 2006 @ 07:00
|
Junior Member
|
21. December 2006 @ 08:15 |
Link to this message
|
am i just posting the small section of the Nero-Burning Rom, History File, because thats not the very last section?
can i just post the whole log file and star out the serial?
|
Moderator
|
21. December 2006 @ 08:21 |
Link to this message
|
|
if you want to post the whole log i can always chop out the bits we don't need
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
|
21. December 2006 @ 08:40 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.68, size=160016 bytes, created 7/22/2004 7:33:44 PM
Nero API version: 6.3.1.26
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <QSI DVD+-RW SDW-085> Version: AX03 - HA 1 TA 1 - 6.3.1.26
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : ST910021AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI DVD+-RW SDW-085 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
QSI DVD+-RW SDW-085 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095148kB)
Free physical memory: 1465MB (1500532kB)
Memory in use : 28 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.12.2006
NeroAPI
12:00:06 AM #1 Phase 112 File APIProgress.cpp, Line 273
DVD-Video files reallocation started
12:00:06 AM #2 Phase 114 File APIProgress.cpp, Line 273
DVD-Video files reallocation completed (no file modified)
12:00:06 AM #3 Phase 111 File APIProgress.cpp, Line 273
DVD-Video files sorted
12:00:06 AM #4 Text 0 File Reader.cpp, Line 126
Reader running
12:00:06 AM #5 Text 0 File AudioCompilationImpl.cpp, Line 817
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:00:06 AM #6 Text 0 File Writer.cpp, Line 124
Writer QSI DVD+-RW SDW-085 running
12:00:06 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:00:06 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
12:00:06 AM #9 Text 0 File Burncd.cpp, Line 3152
Turn on Disc-At-Once, using DVD media
12:00:07 AM #10 Text 0 File DlgWaitCD.cpp, Line 247
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2206095 (490:14.45, 4308MB)
12:00:07 AM #11 Text 0 File DlgWaitCD.cpp, Line 259
Write in overburning mode: NO
12:00:07 AM #12 Text 0 File DlgWaitCD.cpp, Line 2162
Recorder: QSI DVD+-RW SDW-085, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
12:00:07 AM #13 Text 0 File DlgWaitCD.cpp, Line 420
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:00:07 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2206096 (2206096) = #2206096/490:14.46
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2206096 blocks [QSI DVD+-RW SDW-085 ]
--------------------------------------------------------------
12:00:07 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [QSI DVD+-RW SDW-085 ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4518084608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2206096 | lead-out | 1 | 0x00 | 0x41
12:00:07 AM #16 Phase 24 File APIProgress.cpp, Line 273
Caching of files started
12:00:07 AM #17 Text 0 File Burncd.cpp, Line 4163
Cache writing successful.
12:00:07 AM #18 Phase 25 File APIProgress.cpp, Line 273
Caching of files completed
12:00:07 AM #19 Phase 36 File APIProgress.cpp, Line 273
Burn process started at 2.4x (3,324 KB/s)
12:00:10 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:00:10 AM #21 Text 0 File Cdrdrv.cpp, Line 8228
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:00:10 AM #22 Text 0 File DVDPlusRW.cpp, Line 628
Start write address at LBA 0
DVD high compatibility mode: Yes
12:24:02 AM #23 Text 0 File WriterStatus.cpp, Line 115
<QSI DVD+-RW SDW-085 > start writing Lead-Out at LBA 2206096 (21A990h), lenght 0 blocks
12:24:02 AM #24 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
12:24:43 AM #25 Phase 37 File APIProgress.cpp, Line 273
Burn process completed successfully at 2.4x (3,324 KB/s)
12:24:44 AM #26 Text 0 File AudioCompilationImpl.cpp, Line 828
DRM: DRM burn session terminated.
12:24:44 AM #27 Text 0 File AudioCompilationImpl.cpp, Line 857
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 21. December 2006 @ 08:57
|
Moderator
|
21. December 2006 @ 08:58 |
Link to this message
|
Quote:
Nero API version: 6.3.1.26
- quite outdated, not normally a problem but see 2 comments down
Quote:
Recorder: <QSI DVD+-RW SDW-085> Version: AX03
- so far unable to verify if the firmware for this burner is up to date or not, got some info on your burner & similar burners here -
http://forum.rpc1.org/viewtopic.php?t=38...afaddb5f00844b9
http://forum.rpc1.org/viewtopic.php?t=39...2c456b92146dac0
http://club.cdfreaks.com/showthread.php?t=112399
http://www.qsinc.com.tw/qsi/Official_Download_en
...so don't know if we can improve burning via updating firmware, we'll have to just attck the rest of the logfile..
Quote:
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
- yup, Nero's too old to recognise your burner, update to 6.6.0.18 from here -
Package 1
Quote:
Recorder: QSI DVD+-RW SDW-085, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
- not good media at all my sig for reasons not to use CMC media and the sig also has decent media recommendations
Quote:
Burn process started at 2.4x (3,324 KB/s)
- why burning so slow ?
Quote:
Burn process completed successfully at 2.4x (3,324 KB/s)
- hmmm, we already know the discs are skipping on playback, maybe we should do a CRC scan ie check one of those discs you've already burnt, for corruption. see here for info - http://forums.afterdawn.com/thread_jump.cfm/431362/2609745 (and the reply to that one)
Quote:
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/19/2006 4:16:24 PM
- CDRALW2K.SYS is part of Roxio. try uninstalling Roxio (doesn't always play well with Nero), then you might need to fully remove using Roxio Zapper - http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
Basically, try all the suggestions, then try to burn another movie, but only do a Simulation burn (so as to not waste any more discs) and post that section of logfile..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 21. December 2006 @ 09:00
|
Junior Member
|
21. December 2006 @ 09:08 |
Link to this message
|
|
the funny thing is, I do not have anything from roxio on my computer, I also checked to make sure, and it "zapped" easy cd creater which i was unable to find
is my drive bad? it came with my notebook, i have an ABS
but i will try these things and try to burn a movie
i also burned at 2.4 because i thought possibly the movies weren't burning right at 8x
|
Junior Member
|
21. December 2006 @ 09:57 |
Link to this message
|
|
alright, so after burning it...
it works on one dvd player, but not the other one.
it reads but then it skips like an incredible amount... could it just be the dvd player? or is it the DVD?
|
Moderator
|
21. December 2006 @ 12:02 |
Link to this message
|
|
not sure, that's why i suggested doing a CRC scan of that or a.n.other troublesome disc... if there's corruption on there we can narrow down the problem more
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
|
21. December 2006 @ 12:13 |
Link to this message
|
|
sorry but i dont really get the crc scan thing
|
Moderator
|
21. December 2006 @ 12:24 |
Link to this message
|
|
you might have it already installed, look up the 'nero toolkit' shortcuts (and see if 'Nero CD-DVD Speed' is there, then run a 'scandisc' on the disc that skips.... if there's corruption you'll get little red blocks on the scan... and that's where the skipping should be...
..if there's no corruption in theory there shouldn't be any skipping, ie the player might just not like those discs...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
|
21. December 2006 @ 16:57 |
Link to this message
|
|
alright, so i did the disc check and it was 100% good
but the dvd still fails to play correctly in the dvd player
my brother using a mac burned the same movie and it successfully played in that dvd player
could it be the files when i rip the dvd?
|
Moderator
|
22. December 2006 @ 02:31 |
Link to this message
|
|
it could be one of a few things..let's have the latest section of logfile...
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
|
22. December 2006 @ 08:16 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.18
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Internal Version: 6, 6, 0, 18e
Recorder: <QSI DVD+-RW SDW-085> Version: AX03 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : ST910021AS atapi Port 0 ID 0 DMA: On
CdRomPeripheral : QSI DVD+-RW SDW-085 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
QSI DVD+-RW SDW-085 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2046MB (2095148kB)
Free physical memory: 1515MB (1551860kB)
Memory in use : 25
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
21.12.2006
NeroAPI
2:30:35 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
2:30:35 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
2:30:35 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
2:30:35 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
2:30:35 PM #5 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
2:30:35 PM #6 Text 0 File Writer.cpp, Line 122
Writer QSI DVD+-RW SDW-085 running
2:30:35 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:30:36 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
2:30:36 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
2:30:36 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2206095 (490:14.45, 4308MB)
2:30:36 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO
2:30:36 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: QSI DVD+-RW SDW-085, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: E01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 3
2:30:36 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:30:36 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2206096 (2206096) = #2206096/490:14.46
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2206096 blocks [QSI DVD+-RW SDW-085]
--------------------------------------------------------------
2:30:36 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [QSI DVD+-RW SDW-085] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4518084608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2206096 | lead-out | 1 | 0x41 | 0x00
2:30:36 PM #16 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
2:30:36 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
2:30:36 PM #18 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
2:30:36 PM #19 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5,540 KB/s)
2:30:39 PM #20 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x01D15600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0xFF 0x40 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
2:30:39 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:30:39 PM #22 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 3 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: E01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 03 43 4D 43 20 4D - 41 47 00 45 30 31 00 38 ...CMC.MAG.E01.8
23 54 37 10 02 38 6A 02 - 88 67 15 15 0B 0B 08 08 #T7..8j..g......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
2:30:39 PM #23 Text 0 File DVDR.cpp, Line 5766
Drive: QSI DVD+-RW SDW-085
Book Type request [QSI]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:30:39 PM #24 CDR -1211 File DVDR.cpp, Line 5297
Book Type set to: DVD-ROM
2:30:39 PM #25 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
2:45:45 PM #26 Text 0 File WriterStatus.cpp, Line 116
<QSI DVD+-RW SDW-085 > start writing Lead-Out at LBA 2206096 (21A990h), lenght 0 blocks
2:45:45 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:46:26 PM #28 Text 0 File DVDR.cpp, Line 5766
Drive: QSI DVD+-RW SDW-085
Book Type request [QSI]: DVD-ROM, write to EEPROM
Changing the Book Type was finished successfully, return code 0
2:46:26 PM #29 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5,540 KB/s)
2:46:27 PM #30 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
2:46:27 PM #31 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 10/3/2006 12:21:48 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
This message has been edited since posting. Last time this message was edited on 22. December 2006 @ 08:25
|
Moderator
|
22. December 2006 @ 08:24 |
Link to this message
|
well that's a better burn log, plus i see the +R discs are being correctly 'booktyped' to dvd-rom Quote:
Book Type set to: DVD-ROM
so i guess the standalone player just doesn't like those CMC discs.
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
|
22. December 2006 @ 08:35 |
Link to this message
|
|
alright well if theres no more suggestions, thanks a lot :]
|
Moderator
|
22. December 2006 @ 08:37 |
Link to this message
|
|
no problem, i still haven't found out if the firmware on the burner is up to date, but maybe try some better discs when you can, see my sig for details..
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
|
Junior Member
|
22. December 2006 @ 08:39 |
Link to this message
|
|
alright, yea i looked at those links you sent me but like i couldnt tell if they were matching up with the model number and such... i also tried a few sites that i usually get drivers from and they didnt have it on their site
|
Junior Member
|
23. December 2006 @ 12:05 |
Link to this message
|
|
another question man... i just bought memorex disc, because they were on sale for 15 bucks for a pack of 50... i know you dont like memorex but you said sometimes they are alright? i dont wanna open it so if they are bad i can take them back
they only have like them, pony(?), maxell, HP, and sony at staples, oh and staples brand lmao
they say "made in taiwan"
part# 32025619 if that helps or not
do you have any idea if these will be alright?
|
AfterDawn Addict
|
23. December 2006 @ 12:20 |
Link to this message
|
Originally posted by colbz:
another question man... i just bought memorex disc, because they were on sale for 15 bucks for a pack of 50... i know you dont like memorex but you said sometimes they are alright? i dont wanna open it so if they are bad i can take them back
they only have like them, pony(?), maxell, HP, and sony at staples, oh and staples brand lmao
they say "made in taiwan"
part# 32025619 if that helps or not
do you have any idea if these will be alright?
The only "MIT" media I trust is Verbatim. Otherwise you're better off with 1st class media:
Taiyo Yuden, Verbatim and Hitachi Maxell (Made In Japan by Hitachi Corp.)
More info here http://www.digitalfaq.com/media/dvdmedia.htm
EDITED to insert media link.
This message has been edited since posting. Last time this message was edited on 23. December 2006 @ 12:24
|
Junior Member
|
23. December 2006 @ 14:10 |
Link to this message
|
|
That doesnt really help haha...
|
Junior Member
|
23. December 2006 @ 15:20 |
Link to this message
|
|
|
|
Advertisement
|
|
|
AfterDawn Addict
|
23. December 2006 @ 17:49 |
Link to this message
|
Originally posted by colbz:
]another question man... i just bought memorex disc, because they were on sale for 15 bucks for a pack of 50...
Originally posted by colbz:
That doesnt really help haha...
Laugh all you want, you asked for help, you bought some inferior media and I gave you the link to get 1st class media.
Good luck with those cheapy CMC MAG aka Memosux.
|
|
