|
|
|
Illegal Disc error
|
|
|
johnakain
Newbie
|
27. December 2006 @ 18:19 |
Link to this message
|
Heya, I've suddenly been getting this error trying to burn on some RiData Mini DVD-Rs. My drive has the latest firmware and I've made sure DMA is on (since I guess Nero won't report it correctly with Nvidia drivers?). What's weird is two weeks ago I used the first two discs from my spindle worked just fine and previous to that, I've burned tons of these dvds before. Here's the log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <LITE-ON DVDRW SHM-165H6S>Version: HS0E - HA 1 TA 0 - 6.6.0.18
Adapter driver: <nvatabus> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <TOSHIBA DVD-ROM SD-M1912>Version: TM01 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <nvatabus> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : NVIDIA STRIPE 298.10G nvraid Port 0 ID 1 DMA: Off
CdRomPeripheral : LITE-ON DVDRW SHM-165H6S nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : TOSHIBA DVD-ROM SD-M1912 nvatabus Port 1 ID 1 DMA: Off
DiskPeripheral : WDC WD1600JD-00GBB0 nvatabus Port 2 ID 0 DMA: Off
DiskPeripheral : WDC WD1600JD-00GBB0 nvatabus Port 2 ID 2 DMA: Off
=== CDRom-Device-Map ===
LITE-ON DVDRW SHM-165H6S D: CDRom0
TOSHIBA DVD-ROM SD-M1912 E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048040kB)
Free physical memory: 556MB (569348kB)
Memory in use : 45 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.12.2006
Burn DVD Image
7:26:52 PM #1 Text 0 File Reader.cpp, Line 127
Reader running
7:26:52 PM #2 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHM-165H6S running
7:26:52 PM #3 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:26:53 PM #4 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 714543 (158:47.18, 1395MB)
Last address to be written: 713029 (158:27.04, 1392MB)
7:26:53 PM #5 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:26:53 PM #6 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHM-165H6S, Media type: DVD-R
Disc Manufacturer: RITEKG - 04
Disc Application Code: 64, Disc Physical Code: 225
7:26:53 PM #7 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:26:53 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1)
2 indices, index0 (150) not provided
original disc pos #0 + 713030 (713030) = #713030/158:27.5
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 713030 blocks [LITE-ON DVDRW SHM-165H6S]
--------------------------------------------------------------
7:26:53 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHM-165H6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1460285440, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
713030 | lead-out | 1 | 0x41 | 0x00
7:26:53 PM #10 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:26:53 PM #11 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
7:26:53 PM #12 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:26:53 PM #13 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
7:26:53 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
7:26:53 PM #15 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
7:26:53 PM #16 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , SMART-BURN : ON
7:26:53 PM #17 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
7:26:53 PM #18 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 80 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: DE72F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
7:27:12 PM #19 Text 0 File Cdrdrv.cpp, Line 1288
19:27:12.562 - LITE-ON DVDRW SHM-165H6S\H1 T0 : Queue again later
7:27:28 PM #20 Text 0 File Cdrdrv.cpp, Line 1288
19:27:28.234 - LITE-ON DVDRW SHM-165H6S\H1 T0 : Queue again later
7:30:52 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x04EF0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
7:30:52 PM #22 CDR -1046 File Writer.cpp, Line 311
Illegal disc
7:30:52 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:30:52 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:30:52 PM #25 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was 63
7:30:52 PM #26 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\nvatabus.sys': Ver=5.10.2600.0666 built by: WinDDK, size=100736 bytes, created 4/24/2006 5:52:28 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
Moderator
|
27. December 2006 @ 19:58 |
Link to this message
|
Hi johnakain
Yes you're correct about Nero not showing DMA correctly w/ nvidia.
If it's showing DMA on in device manager you good there.
Usually illegal disc is due the media and/or firmware not being up to date. But you're using good media and firmware is up to date.
Never burned any mini dvd's but logic would hold the same.
Anything change pc wise since you were last able to burn?
If you haven't very recently run a disc defrag, registry cleaner like the free ccleaner. Use the issues and cleaner options. Run a virus and spyware scan too.
May or may not help but good to do on a regular basis.
Try another burning program - you can burn those iso's w/ ImgBurn.
Give that a go and let us know.
edit: fix link
This message has been edited since posting. Last time this message was edited on 27. December 2006 @ 19:59
|
|
laurenzo
Junior Member
|
27. December 2006 @ 19:59 |
Link to this message
|
Hi johnakain ,
I can see that your DMA for your Lite on is turned off, I believe it needs to be on, heres a link that may help, http://forums.afterdawn.com/thread_view.cfm/260038
It also appears that your burner doesnt like your discs, are they memorex. I use only Verbatim.
Edit: To add, that shows my inexperience.
This message has been edited since posting. Last time this message was edited on 27. December 2006 @ 20:00
|
|
johnakain
Newbie
|
27. December 2006 @ 21:05 |
Link to this message
|
Originally posted by binkie7:
Anything change pc wise since you were last able to burn?
The only thing that I changed was my floppy drive that died.
Quote:
If you haven't very recently run a disc defrag, registry cleaner like the free ccleaner. Use the issues and cleaner options. Run a virus and spyware scan too.
May or may not help but good to do on a regular basis.
I run my antivirus and malware/spyware cleaners on a regular basis. I also ran ccleaner but that didn't seem to help.
Quote:
Try another burning program - you can burn those iso's w/ ImgBurn.
Give that a go and let us know.
That unfortunately didn't work either :( Here's the log:
I 22:55:00 ImgBurn Version 2.1.0.0 started!
I 22:55:00 Microsoft Windows XP Professional (5.1, Build 2600 : Service Pack 2)
I 22:55:00 Initialising SPTI...
I 22:55:00 Searching for SCSI / ATAPI devices...
I 22:55:00 Found 1 DVD-ROM and 1 DVD±RW/RAM!
I 22:56:10 Operation Started!
I 22:56:10 Source File: F:\Storage\backup.iso
I 22:56:10 Source File Sectors: 712,880 (MODE1/2048)
I 22:56:10 Source File Size: 1,459,978,240 bytes
I 22:56:10 Source File Volume Identifier: BACKUP
I 22:56:10 Source File File System(s): None
I 22:56:10 Destination Device: [1:0:0] LITE-ON DVDRW SHM-165H6S HS0E (D:) (ATA)
I 22:56:10 Destination Media Type: DVD-R (Disc ID: RITEKG04 01) (Speeds: 4x)
I 22:56:10 Destination Media Sectors: 713,936
I 22:56:10 Write Mode: DVD
I 22:56:10 Write Type: DAO
I 22:56:10 Write Speed: MAX
I 22:56:10 Link Size: Auto
I 22:56:10 Test Mode: No
I 22:56:10 BURN-Proof: Enabled
W 22:56:10 DeviceIoControl(IOCTL_STORAGE_MCN_CONTROL) Failed! - Media change notification has
NOT been disabled.
I 22:56:10 Filling Buffer...
I 22:56:11 Writing LeadIn...
W 23:00:08 Failed to Write Sectors 64 - 95 - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (1 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (2 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (3 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (4 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (5 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (6 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (7 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (8 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (9 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (10 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (11 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (12 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (13 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (14 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (15 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (16 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (17 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (18 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (19 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
W 23:00:08 Retrying (20 of 20)...
W 23:00:08 Retry Failed - Cannot Write Medium - Incompatible Format
E 23:00:14 Failed to Write Sectors 64 - 95 - Cannot Write Medium - Incompatible Format
I 23:00:14 Synchronising Cache...
E 23:00:15 Failed to Write Image!
E 23:00:15 Operation Failed! - Duration: 00:04:05
I 23:00:15 Average Write Rate: 0 KB/s (0.0x) - Maximum Write Rate: 0 KB/s (0.0x)
|
Moderator
|
28. December 2006 @ 04:41 |
Link to this message
|
|
Next thing I would do is rule out the dvd's.
Try another brand. For mini ones try Verbatims.
Minis only ones giving your burn failures - single layer dvds burn okay?
|
|
wndrbygav
Newbie
|
2. January 2007 @ 12:58 |
Link to this message
|
hey, im getting this illegal disc error as well. ive burned plenty of dvds in the past but i recently got a pack of Verbatim (i think theyre DVD-R, it doesnt say on the dvds) and theyre giving me this error. is it just these dvds? or something else? heres my log just in case someone wants to take a look. any help would be greatly appreciated. thanks.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 3:24:34 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.4
Internal Version: 6, 6, 1, 4d
(Nero Express)
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSB - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <Memorex DVD+/-DLRWL1 F16>Version: BWSB - HA 1 TA 1 - 6.6.1.4
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITEON DVD-ROM LTD163 E: CDRom0
Memorex DVD+/-DLRWL1 F16 G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785388kB)
Free physical memory: 291MB (298760kB)
Memory in use : 61 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2007
UDF/ISO compilation
5:40:53 PM #1 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
5:40:53 PM #2 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
5:40:53 PM #3 Text 0 File Isodoc.cpp, Line 6475
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:40:53 PM #4 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
5:40:54 PM #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 81920KB of Memory
5:40:54 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
5:40:54 PM #7 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+/-DLRWL1 F16 running
5:40:54 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:40:54 PM #9 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
5:40:54 PM #10 Text 0 File Burncd.cpp, Line 3305
Turn on Disc-At-Once, using DVD media
5:40:54 PM #11 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 324127 ( 72:01.52, 633MB)
5:40:54 PM #12 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD DVD)
5:40:54 PM #13 Text 0 File DlgWaitCD.cpp, Line 2612
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
5:40:54 PM #14 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:40:54 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 324128 (324128) = #324128/72:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 324128 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
5:40:54 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 663814144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
324128 | lead-out | 1 | 0x41 | 0x00
5:40:54 PM #17 Text 0 File SCSIPassThrough.cpp, Line 38
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:40:54 PM #18 Text 0 File SCSIPassThrough.cpp, Line 83
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:40:54 PM #19 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
5:40:54 PM #20 Text 0 File Burncd.cpp, Line 4145
Cache writing successful.
5:40:54 PM #21 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
5:40:54 PM #22 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
5:40:54 PM #23 Text 0 File ThreadedTransferInterface.cpp, Line 2685
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:40:54 PM #24 Text 0 File DVDR.cpp, Line 2707
Recording mode: Sequential Recording Mode
5:40:54 PM #25 Text 0 File DVDR.cpp, Line 2863
Start write address at LBA 0
DVD high compatibility mode: Yes
5:40:54 PM #26 Text 0 File Cdrdrv.cpp, Line 8647
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:41:00 PM #27 SPTI -1046 File SCSIPassThrough.cpp, Line 289
G: CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 02 00 00 00 00 0A 00 00 00 00 30 05
Buffer x0cbd0000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
5:41:00 PM #28 CDR -1046 File Writer.cpp, Line 311
Illegal disc
G: Memorex DVD+/-DLRWL1 F16
5:41:00 PM #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:41:00 PM #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
5:41:00 PM #31 Text 0 File DVDR.cpp, Line 3103
EndDAO: Last written address was -1
5:41:00 PM #32 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 9/3/2002 11:26:59 AM
File 'Drivers\CDRALW2K.SYS': Ver=5.2.0.91, size=23724 bytes, created 12/12/2002 11:35:27 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 3:24:34 AM
File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 11:54:28 AM
File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 10/5/2001 11:54:28 AM
File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 10/5/2001 11:54:28 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/23/2005 5:15:57 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 2, 16, 0, size=92672 bytes, created 7/16/2004 2:53:14 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 2, 16, 0, size=28672 bytes, created 7/16/2004 2:53:54 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 2, 16, 0, size=7680 bytes, created 7/16/2004 2:57:12 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
2. January 2007 @ 15:31 |
Link to this message
|
Hi wndrbygav
Here's a few suggestions.
Nero Version: 6.6.1.4
Take Nero down a notch. Uninstall (write down the serial # 1st) - run the clean tool and install verion 6.6.0.18.
Package 1
Package 2 (recode, vision)
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSB
Burner can use a firmware update. The latest is BWSE
File 'Drivers\CDRALW2K.SYS & File 'Drivers\InCDfs.SYS'
Nero & Roxio don't play well esp when you have Nero InCD installed too.
If you're not using InCD uninstall it and the InCD Clean Tool.
Still failing then uninstall Roxio and run the Zap Tool.
Keep us posted!
|
|
wndrbygav
Newbie
|
3. January 2007 @ 11:01 |
Link to this message
|
|
thanks for the suggestions binkie7. ill try them out tonight and post back later with the results. thanks again! :)
|
|
wndrbygav
Newbie
|
3. January 2007 @ 11:58 |
Link to this message
|
hey i tried everything you suggested and it still gives me the illegal disc error. ill post the newest log if thatll help. thanks for taking the time to help me. if you have any other suggestions thatd be great.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/16/2004 3:24:34 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <Memorex DVD+/-DLRWL1 F16>Version: BWSE - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITEON DVD-ROM LTD163 >Version: GDHF - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITEON DVD-ROM LTD163 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : Memorex DVD+/-DLRWL1 F16 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITEON DVD-ROM LTD163 E: CDRom0
Memorex DVD+/-DLRWL1 F16 D: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 766MB (785388kB)
Free physical memory: 328MB (336112kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.1.2007
UDF/ISO compilation
4:53:57 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
4:53:58 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
4:53:58 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
4:53:58 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
4:53:58 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
4:53:58 PM #6 Text 0 File Writer.cpp, Line 122
Writer Memorex DVD+/-DLRWL1 F16 running
4:53:58 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:53:58 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
4:53:58 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
4:53:59 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 324127 ( 72:01.52, 633MB)
4:53:59 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
4:53:59 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: Memorex DVD+/-DLRWL1 F16, Media type: DVD-R
Disc Manufacturer: MCC 03 - RG20
Disc Application Code: 64, Disc Physical Code: 193
4:53:59 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:53:59 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 324128 (324128) = #324128/72:1.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 324128 blocks [Memorex DVD+/-DLRWL1 F16]
--------------------------------------------------------------
4:53:59 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [Memorex DVD+/-DLRWL1 F16] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 663814144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
324128 | lead-out | 1 | 0x41 | 0x00
4:54:01 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:54:01 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
4:54:01 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:54:01 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
4:54:01 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:54:01 PM #21 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
4:54:01 PM #22 Text 0 File Mmc.cpp, Line 21774
Set BUFE: Buffer underrun protection -> ON , Adapt writespeed to disc : ON
4:54:01 PM #23 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
4:54:01 PM #24 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
4:54:05 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x0C860000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
4:54:05 PM #26 CDR -1046 File Writer.cpp, Line 311
Illegal disc
4:54:05 PM #27 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:54:06 PM #28 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
4:54:06 PM #29 Text 0 File DVDR.cpp, Line 2969
EndDAO: Last written address was -1
4:54:06 PM #30 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 9/3/2002 11:26:59 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/16/2004 3:24:34 AM
File 'Drivers\Tpp200.sys': Ver=5.04.1150.0 , size=35541 bytes, created 10/5/2001 11:54:28 AM
File 'Drivers\Tpp300.sys': Ver=5.04.1150.0 , size=33669 bytes, created 10/5/2001 11:54:28 AM
File 'Drivers\Tpp725.sys': Ver=5.04.1150.0 , size=43269 bytes, created 10/5/2001 11:54:28 AM
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 3/23/2005 5:15:57 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
3. January 2007 @ 16:27 |
Link to this message
|
Not a problem wndrbygav
You're using good discs - Verbatim but even with the firmware update didn't help.
There have been no firmware updates to this drive since 8/04 - BWSE was the last one. So it's looking like 16x -R discs (maybe even 16+R)
may not do well with this drive.
Since it will burn 16x max to +R only you may be better off trying some +R Verbatims. For -R try and get 8x media.
You can also give ImgBurn a shot. Good free burner. You can use the write mode to burn iso's or use the build mode to burn other file types.
|
|
wndrbygav
Newbie
|
4. January 2007 @ 03:09 |
Link to this message
|
yeah i was just looking at the dvds that worked for me before and they were Memorex DVD-R 8x. ImgBurn had an error too. its not really that big of a deal its just someone got a 50 pack of these Verbatims like a year ago and i just now started to use them and was hoping i wouldnt have to waste them. since there hasnt been any updates to my firmware lately do you think that means there wont be anymore updates? anyways, thanks again for your time. it was a big help.
|
Moderator
|
4. January 2007 @ 14:15 |
Link to this message
|
Not a problem wndrbygav
Yeah I don't think Memerox will have any more firmware updates for this drive.
But this drive is an oem LiteOn 1633S so you try using the patched LiteOn 1633 firmware BSOY. That was last updated about 6 mos ago.
Here's a link.
Might want to give that a go. Since there is newer media that this drive probably can't support I'd try that and/or replace the drive with a newer. Good ones are pretty cheap now.
|
|
wndrbygav
Newbie
|
4. January 2007 @ 15:13 |
Link to this message
|
|
It worked! haha. i installed the patched BSOY from Lite-On and it fixed it. I shall spread your knowledge. Thank you very much for all your help. I was just accepting the fact the all 50 of those Verbatims were useless. Thanks again! :)
|
|
dkraut
Suspended permanently
|
4. January 2007 @ 15:26 |
Link to this message
|
|
jhonakain, someone else noticed it but i dont think you caught the response, your drive is listed as having DMA off.
|
Moderator
|
4. January 2007 @ 15:28 |
Link to this message
|
|
You're welcome :)
Glad the patched firmware did the trick (almost forget some Memorex's are made by LiteOn).
Happy Burning!
|
AfterDawn Addict
|
4. January 2007 @ 20:41 |
Link to this message
|
@dkraut, Well we catch up again, good to see you offering some invaluable help, especially in your last 2 posts, about the DMA...you should tell them How to turn it back on
Response from binkie7
Quote:
Hi johnakain
Yes you're correct about Nero not showing DMA correctly w/ nvidia.
If it's showing DMA on in device manager you good there.
laurenzo was incorrect and posted so!!
This message has been edited since posting. Last time this message was edited on 4. January 2007 @ 20:49
|
|
dkraut
Suspended permanently
|
4. January 2007 @ 21:43 |
Link to this message
|
Quote:
@dkraut, Well we catch up again, good to see you offering some invaluable help, especially in your last 2 posts, about the DMA...you should tell them How to turn it back on
Response from binkie7
[quote]Hi johnakain
Yes you're correct about Nero not showing DMA correctly w/ nvidia.
If it's showing DMA on in device manager you good there.
laurenzo was incorrect and posted so!![/quote]at the time it seemed that no one had offered the help they needed so i figured i would give them a push in the right direction, i am pretty sure they are smart enough to do a search of the forums to find out how to turn them back on
|
AfterDawn Addict
|
4. January 2007 @ 21:55 |
Link to this message
|
Quote:
i am pretty sure they are smart enough to do a search of the forums to find out how to turn them back on
I think you are wrong in assuming this as this is The reason they seek our assistance
If you know something then DONT keep it a secret and assume others do...solve it for them...thats' what the majority here at AD do.
This message has been edited since posting. Last time this message was edited on 4. January 2007 @ 21:56
|
|
dkraut
Suspended permanently
|
5. January 2007 @ 05:33 |
Link to this message
|
|
get off your high horse gwendolin, you are not a god to be worshiped. you didnt even properly diagnose my issue and that wouldnt even have been an issue if you had told me to TRY this or that and see if its the problem. No, you had to TELL me what my problem was in a rude manner and were completely WRONG. get over yourself.
|
AfterDawn Addict
|
5. January 2007 @ 06:32 |
Link to this message
|
Originally posted by dkraut:
jhonakain, someone else noticed it but i dont think you caught the response, your drive is listed as having DMA off.
This proves you know nothing. He stated earlier that as he has Nvidia drivers that Nero does not correctly show up whether DMA is on or off. In this instance, he has said it is on, yet Nero won't show it as they are Nvidia drives.
Please don't come around here with a "know it all" attitude, when really you have no knowledge of any of this. Also, you have the nerve to go on and insult one of our most knowledgeable members in this area, ie Nero, for the second time now; I beleive.
I think you should "get over yourself". Btw, I've reported you, and this time, I don't think we'll be seeing you with a temp ban under your name.
|
|
ddp
Moderator
|
5. January 2007 @ 06:39 |
Link to this message
|
|
nope as dkraut got hit by lightning. any wolves here for burnt meat??
|
AfterDawn Addict
|
5. January 2007 @ 06:41 |
Link to this message
|
|
Thanks for that ddp.
But burnt? I prefer my idiots tender. ;-P
|
|
ddp
Moderator
|
5. January 2007 @ 07:12 |
Link to this message
|
|
there might be some parts still tender as in brain, liver & others.
|
AfterDawn Addict
|
5. January 2007 @ 07:15 |
Link to this message
|
|
Ah, but they are the chewy bits.
The flesh it the bit we're all after, while they can still feel it ;-)
|
|
Advertisement
|
|
|
|
dillyk
Suspended permanently
|
5. January 2007 @ 09:54 |
Link to this message
|
|
you edited by ddp, no personal attacks, looks like you are guilty of that yourself you edited by ddp, so go ahead ban me again i will just keep coming back with different email addys so go edited by ddp yourself edited by ddp!!!
This message has been edited since posting. Last time this message was edited on 5. January 2007 @ 12:49
|
|
