|
|
|
Why do my DVD burns fail - dma.crc error
|
|
|
pwrrwp
Newbie
|
2. January 2007 @ 11:47 |
Link to this message
|
Hi ? wonder if you can help me with a dma/crc error.
I?m using quite an old machine, running XP ? it?s a Pentium 3, with 256 ram running at 864 Mhz. It did have a cd player and a cd re-writer. I?ve just bought a Liteon 18x DVD rewriter. I took the CD player out and replaced it with the DVD rewriter. As per the instructions, I set the DVD re-writer at the end of the wide multi section cable (IDE cable) ? which was where the cd player was. Installation instructions suggested making the dvd rewriter the Master and the other drive the slave. I did this (this reversed the scenario I had when using the cd-rewriter and cd-player). I connected the audio and power, closed the box and booted up. Everything appeared fine.
I have been trying to burn DVD-video files onto the disc. I?ve been successful once out of about 10 times. The same error occurs and I really don?t know what I should be doing to correct it. Any help possible? The fail log is pasted below. Thanks.
Paul Reeves
BRGS
4C87-2018-2005-477K-055X-4026-3571-CMA6*
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.60 (1021), size=45056 bytes, created 10/09/1999 12:06:00
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 02/11/2004 13:54:32
NT-SPTI used
Nero Version: 7.2.3.3
Internal Version: 7, 2, 3, 3
(Nero Express)
Recorder: <LITE-ON DVDRW LH-18A1P> Version: GL05 - HA 1 TA 0 - 7.2.3.3
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <TOSHIBA DVD-ROM SD-R1002>Version: 1038 - HA 1 TA 1 - 7.2.3.3
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : LITE-ON DVDRW LH-18A1P atapi Port 1 ID 0 DMA: On
CdRomPeripheral : TOSHIBA DVD-ROM SD-R1002 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
TOSHIBA DVD-ROM SD-R1002 D: CDRom1
LITE-ON DVDRW LH-18A1P E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
BUFE : 0
Physical memory : 255MB (261688kB)
Free physical memory: 68MB (70596kB)
Memory in use : 73 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.1.2007
UDF/ISO compilation
15:55:31 #1 Phase 112 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation started
15:55:32 #2 Phase 114 File dlgbrnst.cpp, Line 1730
DVD-Video files reallocation completed (no file modified)
15:55:32 #3 Text 0 File Isodoc.cpp, Line 6427
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
15:55:32 #4 Phase 111 File dlgbrnst.cpp, Line 1730
DVD-Video files sorted
15:55:33 #5 Text 0 File ThreadedTransfer.cpp, Line 531
ReadBuffer-Pipe got 39936KB of Memory
15:55:33 #6 Text 0 File Reader.cpp, Line 124
Reader running
15:55:33 #7 Text 0 File Writer.cpp, Line 113
Writer E: LITE-ON DVDRW LH-18A1P running
15:55:33 #8 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
15:55:33 #9 ISO9660GEN -11 File Geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
15:55:34 #10 Text 0 File Burncd.cpp, Line 3400
Turn on Disc-At-Once, using DVD media
15:55:34 #11 Text 0 File DlgWaitCD.cpp, Line 290
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2135343 (474:31.18, 4170MB)
15:55:34 #12 Text 0 File DlgWaitCD.cpp, Line 302
Write in overburning mode: NO (enabled: CD)
15:55:34 #13 Text 0 File DlgWaitCD.cpp, Line 2733
Recorder: LITE-ON DVDRW LH-18A1P, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AE1
Disc Application Code: 64, Disc Physical Code: 193
15:55:34 #14 Text 0 File DlgWaitCD.cpp, Line 474
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:55:34 #15 Text 0 File ThreadedTransferInterface.cpp, Line 847
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2135344 (2135344) = #2135344/474:31.19
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2135344 blocks [E: LITE-ON DVDRW LH-18A1P]
--------------------------------------------------------------
15:55:34 #16 Text 0 File ThreadedTransferInterface.cpp, Line 1059
Prepare recorder [E: LITE-ON DVDRW LH-18A1P] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4373184512, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2135344 | lead-out | 1 | 0x41 | 0x00
15:55:34 #17 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
15:55:34 #18 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
15:55:34 #19 Text 0 File Burncd.cpp, Line 4231
Cache writing successful.
15:55:34 #20 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
15:55:34 #21 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 8x (11,080 KB/s)
15:55:35 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2707
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:55:35 #23 Text 0 File DVDR.cpp, Line 2905
Recording mode: Sequential Recording Mode
15:55:35 #24 Text 0 File DVDR.cpp, Line 3061
Start write address at LBA 0
DVD high compatibility mode: Yes
15:55:35 #25 Text 0 File Cdrdrv.cpp, Line 8995
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 30 00 10 20 00 00 00 - 00 00 00 21 00 00 00 00 .0.........!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:56:13 #26 Text 0 File Cdrdrv.cpp, Line 1224
15:56:13.936 - E: LITE-ON DVDRW LH-18A1P : Queue again later
15:56:30 #27 SPTI -1502 File SCSIPassThrough.cpp, Line 291
E: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1502)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 01 60 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0A 00 00 00 00 08 03
Buffer x04e00000: Len x10000
0x00 00 01 BA 44 00 05 00 04 21 01 89 C3 F8 00 00
0x01 E0 07 EC 80 00 00 98 A1 67 D0 71 AE E6 DD 44
0x34 81 54 27 93 49 88 2D 39 3D B6 F8 23 31 04 DA
15:56:30 #28 CDR -1502 File Writer.cpp, Line 302
DMA-driver error, CRC error
E: LITE-ON DVDRW LH-18A1P
15:56:30 #29 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
15:56:31 #30 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
15:56:31 #31 Text 0 File DVDR.cpp, Line 3301
EndDAO: Last written address was 351
15:58:36 #32 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.60 (1021), size=25244 bytes, created 10/09/1999 12:06:00
File 'Drivers\PXHELP20.SYS': Ver=2.03.28a, size=20640 bytes, created 11/03/2005 22:28:09 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Paul
|
Moderator
|
2. January 2007 @ 17:34 |
Link to this message
|
Hi pwrrwp
1st thing - edit out the serial # in the log - begins w/ 4C.
Don't need someone else using it.
Nero Version: 7.2.3.3
Nero can update an update - plus it's not fully recognizing the new LiteOn. It shows it as this - Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
The latest Nero is 7.5.0.9a
We're both cd drives working ok just before you swapped one with the LiteOn?
Did you change the jumper pins on both drives to match how they're connected on the ide cable?
Try uninstaling the ide channel (secondary) in device manager - no go then uninstall the burner in device manager.
Here's a guide for DMA but you can follow this instructions on how to uninstall.
Disc Manufacturer: CMC MA - G. AE1
Not the best discs by far. Better would be Verbatim or made in Japan Sony, Fuji or Maxell.
Here's another good free burning program to try also if the above suggestions don't help - ImgBurn
You would use the build mode to burn the video files.
|
|
