|
|
|
Unable to burn a DVD on a TDK external dvd writer
|
|
|
dugar158
Suspended due to non-functional email address
|
12. January 2007 @ 07:55 |
Link to this message
|
I am unable to burn any dvd on tdk external dvd writer.
I get illegal disc, unable to perform disc at once operation.
I am using Nero version 6.3.1.18
Can any body please help me out with it.
I have upgraded the firmware to the latest version 1.0C, and DMA mode is ON. My USB is version 2.0
TDK writer model number is 440N
I dont know what i am missing here.
Following are the log details:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 F: CDRom0
SAMSUNG CD-R/RW SW-252F G: CDRom1
TDK DVDRW0404N H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 81MB (83460kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.1.2007
ISO compilation
8:46:46 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:46:46 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
8:46:46 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:46:46 AM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:46:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2258015 (501:46.65, 4410MB)
8:46:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
8:46:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
8:46:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:46:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
8:46:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2258016 | lead-out | 1 | 0x00 | 0x41
8:46:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:46:47 AM #12 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:46:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:46:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 1x (1,385 KB/s)
8:46:48 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:46:48 AM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 55:45,522 (3345522ms) -> OK
8:46:48 AM #17 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
8:46:48 AM #18 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
8:46:48 AM #19 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
8:46:48 AM #20 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version
|
|
Advertisement
|
|
|
|
|
dugar158
Suspended due to non-functional email address
|
12. January 2007 @ 07:58 |
Link to this message
|
|
i also did through many of the previous posts but i am still stuck with it.
|
|
dugar158
Suspended due to non-functional email address
|
12. January 2007 @ 09:16 |
Link to this message
|
I have upgraded my Nero to 7.5.9, but i am still facing the same problem.
|
AfterDawn Addict
|
12. January 2007 @ 09:34 |
Link to this message
|
This does not look like the entire log. Seems to be missing the bottom part that would contain the error messages.
If you have Nero 7 then post the entire last log from that.
Nero 7 logs should be here:
C:\Program Files\Nero\Nero 7\Core\NeroHistory.log
Sometimes newer Nero 7 versions (like mine) are saved in:
C:\Documents and Settings\USERNAME\Application Data\Ahead\Nero Burning ROM
About all I can see from this log is that you are running 256 MB of RAM which shouldn't be a problem, it will make your rip times a lot longer though.
|
|
dugar158
Suspended due to non-functional email address
|
12. January 2007 @ 19:05 |
Link to this message
|
I have completely removed roxio, but the problem still persists.
Also, i was burning at 1x speed, just to make sure that the burn operation does not fail. Since i am unable to burn at all, i dont want to take any chances.
Below are the complete logs by Nero 7.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <SONY DVD RW DW-Q28A> Version: KYS1 - HA 1 TA 0 - 6.3.1.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 11
Drive is autodetected - recorder class: DVD+R9 DL recorder
CD-ROM: <SONY DVD RW DW-Q28A >Version: KYS1 - HA 1 TA 0 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD RW DW-Q28A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW DW-Q28A F: CDRom0
HL-DT-ST DVD-ROM GDR8163 G: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 91MB (93596kB)
Memory in use : 64 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.10.2006
UDF/ISO compilation
6:51:47 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
6:51:47 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
6:51:47 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:51:47 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
6:51:47 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
6:51:47 PM #6 Text 0 File Writer.cpp, Line 124
Writer SONY DVD RW DW-Q28A running
6:51:47 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:51:47 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
6:51:47 PM #9 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
6:51:47 PM #10 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2199439 (488:45.64, 4295MB)
6:51:47 PM #11 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD)
6:51:47 PM #12 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: SONY DVD RW DW-Q28A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
6:51:47 PM #13 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:51:47 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [SONY DVD RW DW-Q28A ]
--------------------------------------------------------------
6:51:47 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SONY DVD RW DW-Q28A ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2199440 | lead-out | 1 | 0x00 | 0x41
6:51:47 PM #16 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
6:51:48 PM #17 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
6:51:48 PM #18 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
6:51:48 PM #19 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 8x (11,080 KB/s)
6:51:48 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:51:48 PM #21 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 6:51,992 (411992ms) -> OK
6:51:48 PM #22 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
6:51:48 PM #23 Text 0 File Mmc.cpp, Line 20453
Set BUFE: Power-Burn -> ON , Generic write control : ON
6:51:48 PM #24 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
6:51:48 PM #25 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:52:45 PM #26 Text 0 File Cdrdrv.cpp, Line 1294
18:52:45.046 - SONY DVD RW DW-Q28A\H1 T0 : Queue again later
6:54:39 PM #27 SCSI -1024 File Cdrdrv.cpp, Line 1442
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x081F0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x08
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x05 0xD5 0x60 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x08 0x03
6:54:39 PM #28 CDR -1024 File Writer.cpp, Line 304
Communication failure
6:54:39 PM #29 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
6:54:39 PM #30 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
6:54:39 PM #31 Text 0 File DVDR.cpp, Line 2304
EndDAO: Last written address was 382303
6:55:14 PM #32 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
6:55:14 PM #33 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
6:55:14 PM #34 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: < Image Recorder> Version: Not available - HA -1 TA 0 - 6.3.1.18
Adapter driver: <Virtual Device> HA -1
Drive buffer :
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252F G: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 173MB (177488kB)
Memory in use : 31 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.10.2006
CD Copy
8:27:55 AM #1 Text 0 File Reader.cpp, Line 118
Reader running
8:27:55 AM #2 Phase 48 File dlgbrnst.cpp, Line 1845
Analyzing disc
8:27:55 AM #3 Text 0 File Writer.cpp, Line 124
Writer Image Recorder running
8:27:57 AM #4 CDCOPY -1 File CDCopy.cpp, Line 1896
The CD is copyrighted
8:28:04 AM #5 Text 0 File CDCopy.cpp, Line 2116
_Index0_ _______Index1_______ PostPause ___LastBlockOfTrack_
Track 1: 0 0 ( 0:02.00) 296659 296658 ( 65:57.33)
8:28:04 AM #6 Text 0 File CDCopy.cpp, Line 840
Copy options: copy on-the-fly: ON
read ISRC/MCN: OFF
use jitter correction: OFF
data options
ignore read error: ON write defekt blocks OFF
read raw data: OFF read r-w subchannel data: OFF
audio options
ignore read error: ON
read indexes: OFF read r-w subchannel data: OFF
source disc does not look like CD Extra
01. 0 - 296659 = 296659, data (TRM_DATA_MODE1, block size 2048)
8:28:04 AM #7 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using CD-R/RW media
8:28:05 AM #8 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2147483646 (477218:37.21)
Last address to be written: 296658 ( 65:57.33)
8:28:05 AM #9 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD)
8:28:05 AM #10 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: Image Recorder;
CD type reading failed
ATIP Data: ?
8:28:05 AM #11 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:28:05 AM #12 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 296659 (296659) = #296659/65:55.34
relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 296659 blocks [ Image Recorder ]
--------------------------------------------------------------
8:28:26 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [ Image Recorder ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 607864832, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
-150 | lead-in | 0 | 0x00 | 0x41
-150 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
296659 | lead-out | 1 | 0x00 | 0x41
8:28:26 AM #14 Phase 65 File dlgbrnst.cpp, Line 1845
Burn process started
8:28:26 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, no disc pos, no patch infos, orig at #0): write at #0
8:31:04 AM #16 Text 0 File WriterStatus.cpp, Line 115
< Image Recorder > start writing Lead-Out at LBA 296659 (486D3h), lenght 0 blocks
8:31:06 AM #17 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
8:31:07 AM #18 Phase 66 File dlgbrnst.cpp, Line 1845
Burn process completed successfully
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252F G: CDRom0
TDK DVDRW0404N F: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 86MB (88480kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.10.2006
UDF/ISO compilation
9:25:39 AM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
9:25:39 AM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
9:25:39 AM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
9:25:39 AM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
9:25:39 AM #5 Text 0 File Reader.cpp, Line 118
Reader running
9:25:39 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:25:40 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
9:25:40 AM #8 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
9:25:40 AM #9 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2199439 (488:45.64, 4295MB)
9:25:40 AM #10 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
9:25:40 AM #11 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
9:25:40 AM #12 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:25:40 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
9:25:40 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2199440 | lead-out | 1 | 0x00 | 0x41
9:25:41 AM #15 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
9:25:41 AM #16 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
9:25:41 AM #17 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
9:25:41 AM #18 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2.4x (3,324 KB/s)
9:25:41 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:25:41 AM #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 22:41,640 (1361640ms) -> OK
9:25:41 AM #21 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
9:25:41 AM #22 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
9:25:41 AM #23 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
9:25:41 AM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
9:25:41 AM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
9:25:41 AM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
9:25:41 AM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
9:25:41 AM #28 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
9:25:41 AM #29 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252F G: CDRom0
TDK DVDRW0404N F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 57MB (58860kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.10.2006
UDF/ISO compilation
2:39:23 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
2:39:23 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
2:39:23 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
2:39:23 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
2:39:23 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
2:39:23 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
2:39:23 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
2:39:23 PM #8 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
2:39:24 PM #9 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2199439 (488:45.64, 4295MB)
2:39:24 PM #10 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
2:39:24 PM #11 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
2:39:24 PM #12 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:39:24 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
2:39:24 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2199440 | lead-out | 1 | 0x00 | 0x41
2:39:24 PM #15 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
2:39:24 PM #16 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
2:39:24 PM #17 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
2:39:24 PM #18 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2.4x (3,324 KB/s)
2:39:24 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:39:25 PM #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 22:41,640 (1361640ms) -> OK
2:39:25 PM #21 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
2:39:25 PM #22 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
2:39:25 PM #23 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
2:39:25 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
2:39:25 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
2:39:25 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
2:39:25 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
2:39:25 PM #28 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
2:39:25 PM #29 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 12:20:36 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-R/RW SW-252F G: CDRom0
TDK DVDRW0404N F: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 82MB (84008kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.10.2006
UDF/ISO compilation
8:05:57 PM #1 Phase 112 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation started
8:05:57 PM #2 Phase 114 File dlgbrnst.cpp, Line 1845
DVD-Video files reallocation completed (no file modified)
8:05:57 PM #3 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:05:57 PM #4 Phase 111 File dlgbrnst.cpp, Line 1845
DVD-Video files sorted
8:05:57 PM #5 Text 0 File Reader.cpp, Line 118
Reader running
8:05:57 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:05:57 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:05:57 PM #8 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:05:57 PM #9 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2199439 (488:45.64, 4295MB)
8:05:57 PM #10 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
8:05:57 PM #11 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
8:05:57 PM #12 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:05:57 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2199440 (2199440) = #2199440/488:45.65
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2199440 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
8:05:57 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4504453120, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2199440 | lead-out | 1 | 0x00 | 0x41
8:05:58 PM #15 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:05:58 PM #16 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:05:58 PM #17 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:05:58 PM #18 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 2.4x (3,324 KB/s)
8:05:58 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:05:58 PM #20 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 22:41,640 (1361640ms) -> OK
8:05:58 PM #21 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
8:05:58 PM #22 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
8:05:58 PM #23 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
8:05:58 PM #24 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:05:58 PM #25 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x8F 0x90 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
8:05:58 PM #26 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
8:05:58 PM #27 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
8:05:58 PM #28 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:05:58 PM #29 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=6.1.0.88 , size=24698 bytes, created 5/22/2003 12:20:36 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <SAMSUNG CD-R/RW SW-252F> Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 F: CDRom0
SAMSUNG CD-R/RW SW-252F G: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 75MB (76972kB)
Memory in use : 70 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.12.2006
CD-ROM (ISO)
10:49:36 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Continue multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:49:36 PM #2 Phase 88 File dlgbrnst.cpp, Line 1845
ExacLink activated
10:49:36 PM #3 Text 0 File Reader.cpp, Line 118
Reader running
10:49:36 PM #4 Text 0 File Writer.cpp, Line 124
Writer SAMSUNG CD-R/RW SW-252F running
10:49:36 PM #5 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
10:49:36 PM #6 Text 0 File Burncd.cpp, Line 3172
Turn on Track-at-once, using CD-R/RW media
10:49:38 PM #7 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 185469 ( 41:14.69)
10:49:38 PM #8 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
10:49:38 PM #9 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: SAMSUNG CD-R/RW SW-252F;
CDR code: 00 97 24 16; OSJ entry from: SONY Corporation
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 18 10 (LI 97:24.16), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
10:49:38 PM #10 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:49:38 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 135460 (135460) = #135460/30:6.10
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 135458 blocks [SAMSUNG CD-R/RW SW-252F ]
--------------------------------------------------------------
10:49:38 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [SAMSUNG CD-R/RW SW-252F ] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 2 to 2:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 277729280, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
49860 | lead-in | 0 | 0x00 | 0x41
49860 | 2 | 0 | 0x00 | 0x41
50010 | 2 | 1 | 0x00 | 0x41
185470 | lead-out | 1 | 0x00 | 0x41
10:49:38 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 1030
Removed 2 run-out blocks from end of track 2. Length: 135460 -> 135458.
10:49:39 PM #14 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
10:49:39 PM #15 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
10:49:39 PM #16 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
10:49:39 PM #17 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 24x (3,600 KB/s)
10:49:39 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #50010
10:49:39 PM #19 Text 0 File Mmc.cpp, Line 20453
Set BUFE: ExacLink -> ON
10:51:07 PM #20 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
10:51:13 PM #21 Text 0 File Mmc.cpp, Line 15278
<SAMSUNG CD-R/RW SW-252F > start Close Session
10:51:19 PM #22 Phase 37 File dlgbrnst.cpp, Line 1845
Burn process completed successfully at 24x (3,600 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 F: CDRom0
SAMSUNG CD-R/RW SW-252F G: CDRom1
TDK DVDRW0404N H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 94MB (97160kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2007
ISO compilation
11:36:43 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:36:43 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
11:36:43 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:36:43 PM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
11:36:44 PM #5 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2258015 (501:46.65, 4410MB)
11:36:44 PM #6 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
11:36:44 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
11:36:44 PM #8 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:36:44 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
11:36:44 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2258016 | lead-out | 1 | 0x00 | 0x41
11:36:44 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
11:36:45 PM #12 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
11:36:45 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
11:36:45 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 1x (1,385 KB/s)
11:36:45 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:36:45 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 55:45,522 (3345522ms) -> OK
11:36:45 PM #17 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
11:36:45 PM #18 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
11:36:45 PM #19 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
11:36:45 PM #20 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:36:45 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:36:45 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
11:36:45 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
11:36:45 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
11:36:45 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.08 - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 F: CDRom0
SAMSUNG CD-R/RW SW-252F G: CDRom1
TDK DVDRW0404N H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 94MB (96492kB)
Memory in use : 62 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2007
ISO compilation
11:39:13 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:39:13 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
11:39:13 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:39:13 PM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
11:39:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2258015 (501:46.65, 4410MB)
11:39:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
11:39:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
11:39:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:39:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
11:39:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2258016 | lead-out | 1 | 0x00 | 0x41
11:39:14 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
11:39:14 PM #12 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
11:39:14 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
11:39:14 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 1x (1,385 KB/s)
11:39:14 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:39:14 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 55:45,522 (3345522ms) -> OK
11:39:14 PM #17 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
11:39:14 PM #18 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
11:39:14 PM #19 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
11:39:14 PM #20 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:39:14 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:39:14 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
11:39:14 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
11:39:14 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
11:39:14 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 F: CDRom0
SAMSUNG CD-R/RW SW-252F G: CDRom1
TDK DVDRW0404N H: CDRom4
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 20MB (20612kB)
Memory in use : 92 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
9.1.2007
ISO compilation
11:48:47 PM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
11:48:47 PM #2 Text 0 File Reader.cpp, Line 118
Reader running
11:48:47 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
11:48:47 PM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
11:48:47 PM #5 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2258015 (501:46.65, 4410MB)
11:48:47 PM #6 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
11:48:48 PM #7 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
11:48:48 PM #8 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:48:48 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
11:48:48 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2258016 | lead-out | 1 | 0x00 | 0x41
11:48:49 PM #11 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
11:48:50 PM #12 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
11:48:50 PM #13 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
11:48:50 PM #14 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 1x (1,385 KB/s)
11:48:50 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:48:50 PM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 55:45,522 (3345522ms) -> OK
11:48:50 PM #17 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
11:48:50 PM #18 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
11:48:50 PM #19 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
11:48:50 PM #20 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:48:50 PM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
11:48:50 PM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
11:48:50 PM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
11:48:50 PM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
11:48:51 PM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Ashish
1A20-020E-0000-1349-1210-6697*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.59, size=160016 bytes, created 12/16/2003 8:18:06 PM
Nero version: 6.3.1.18 (Nero Express)
Recorder: <TDK DVDRW0404N> Version: 1.0C - HA 2 TA 0 - 6.3.1.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG CD-R/RW SW-252F >Version: R806 - HA 1 TA 1 - 6.3.1.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3160021A atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 1 ID 0 DMA: On
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163 F: CDRom0
SAMSUNG CD-R/RW SW-252F G: CDRom1
TDK DVDRW0404N H: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 254MB (260592kB)
Free physical memory: 86MB (88132kB)
Memory in use : 66 %
Uncached PFiles: 0x0
Use Static Write Speed Table: 0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.1.2007
ISO compilation
8:46:46 AM #1 Text 0 File Isodoc.cpp, Line 6065
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:46:46 AM #2 Text 0 File Reader.cpp, Line 118
Reader running
8:46:46 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3899
First writeable address = 0 (0x00000000)
8:46:46 AM #4 Text 0 File Burncd.cpp, Line 3172
Turn on Disc-at-once, using DVD media
8:46:47 AM #5 Text 0 File DlgWaitCD.cpp, Line 246
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2258015 (501:46.65, 4410MB)
8:46:47 AM #6 Text 0 File DlgWaitCD.cpp, Line 258
Write in overburning mode: NO (enabled: CD DVD)
8:46:47 AM #7 Text 0 File DlgWaitCD.cpp, Line 2143
Recorder: TDK DVDRW0404N, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
8:46:47 AM #8 Text 0 File DlgWaitCD.cpp, Line 419
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:46:47 AM #9 Text 0 File ThreadedTransferInterface.cpp, Line 813
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (CTransferItem)
2 indices, index0 (150) not provided
original disc pos #0 + 2258016 (2258016) = #2258016/501:46.66
relocatable, disc pos for caching/writing not required/required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2258016 blocks [TDK DVDRW0404N ]
--------------------------------------------------------------
8:46:47 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 984
Prepare recorder [TDK DVDRW0404N ] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4624416768, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_RecDep_|_CtrlAdr_
0 | lead-in | 0 | 0x00 | 0x41
0 | 1 | 0 | 0x00 | 0x41
0 | 1 | 1 | 0x00 | 0x41
2258016 | lead-out | 1 | 0x00 | 0x41
8:46:47 AM #11 Phase 24 File dlgbrnst.cpp, Line 1845
Caching of files started
8:46:47 AM #12 Text 0 File Burncd.cpp, Line 4182
Cache writing successful.
8:46:47 AM #13 Phase 25 File dlgbrnst.cpp, Line 1845
Caching of files completed
8:46:47 AM #14 Phase 36 File dlgbrnst.cpp, Line 1845
Burn process started at 1x (1,385 KB/s)
8:46:48 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 2344
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:46:48 AM #16 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 55:45,522 (3345522ms) -> OK
8:46:48 AM #17 Text 0 File DVDR.cpp, Line 1921
Recording mode: Sequential Recording Mode
8:46:48 AM #18 Text 0 File Mmc.cpp, Line 20453
Set BUFE: supported -> ON
8:46:48 AM #19 Text 0 File DVDR.cpp, Line 2062
Start write address at LBA 0
DVD high compatibility mode: Yes
8:46:48 AM #20 Text 0 File Cdrdrv.cpp, Line 8128
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:46:48 AM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x22 0x74 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
8:46:48 AM #22 CDR -1046 File ThreadedTransferInterface.cpp, Line 1614
Illegal disc
8:46:48 AM #23 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1614
Could not perform start of Disc-at-once
8:46:48 AM #24 Text 0 File dlgbrnst.cpp, Line 1703
Set remaining time: 0:00,000 (0ms) -> OK
8:46:48 AM #25 Phase 38 File dlgbrnst.cpp, Line 1845
Burn process failed at 1x (1,385 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 8/25/2006 9:17:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 8/25/2006 9:17:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 5:30:00 PM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
|
|
Advertisement
|
|
|
AfterDawn Addict
|
12. January 2007 @ 20:12 |
Link to this message
|
I didn't count how many logs you posted, but you have your Nero serial number at the beginning of each one. You should edit all of them out. They start with 1A20....
You are getting these "Check Condition" SCSI errors:
Quote:
8:46:48 AM #21 SCSI -1046 File Cdrdrv.cpp, Line 1188
SCSI Exec, HA 2, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
That is telling me there is a problem with the connections going to the drive or there is something wrong with the drive itself or it may be a problem with the blank media you are using.
It looks like you are using TDK media which is supposed to be OK unless you have the fake ones. Try some different media. Verbatim, Taiyo Yuden, Hitachi Maxell are 1st class.
As far as your USB cable goes, just make sure you are plugged into a USB 2.0 port and not a 1.1 or lower. Check your computer's specs to find out. Any newer computer will be 2.0. You may have some other problem with the USB port.
I notice from your logs that you have a CD burner installed iinternally:
Quote:
CdRomPeripheral : SAMSUNG CD-R/RW SW-252F atapi Port 1 ID 1 DMA: On
You really should pull it out, remove the TDK from it's external case and put it in where the CD burner was. It is always better to have the burner and DVD ROM installed internally, attached to the IDE buss.
And if you do open your PC, consider installing another stick of RAM in there to bring it up to 512 MB.
But try some different media first.
|
|
