|
|
|
Focus or tracking error
|
|
|
Vijen
Newbie
|
15. February 2007 @ 20:20 |
Link to this message
|
Please help...I have an LG 4163B DVD writer and use Nero 6.6.0.18. It successfully writes only 2 out of 10 DVDS. I previously used 4X DVD's and they worked fine. I have now tried Verbatim and HP 16X DVD +R and experience problems 80% of the time. The errors that Nero reports are :- "Focus or tracking error",
or "Illegal block size for command", or "could not perform disk at once".
This occurs when I try writing DVD video or DVD data files. I have attached a log file below. Any help is greatly appreciated.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002/07/17 09:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/26 06:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 3 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152A >Version: CA06 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG CD-ROM SC-152A atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3160827AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152A F: CDRom0
HL-DT-ST DVDRAM GSA-4163B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 630MB (645696kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
15.2.2007
ISO compilation
07:14:00 PM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
07:14:00 PM #2 Text 0 File Reader.cpp, Line 127
Reader running
07:14:00 PM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
07:14:00 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
07:14:01 PM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
07:14:01 PM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1333055 (296:14.05, 2603MB)
07:14:01 PM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
07:14:01 PM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
07:14:01 PM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
07:14:01 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1333056 (1333056) = #1333056/296:14.6
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1333056 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
07:14:03 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2730098688, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1333056 | lead-out | 1 | 0x41 | 0x00
07:14:04 PM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
07:14:04 PM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
07:14:04 PM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
07:14:04 PM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (16,620 KB/s)
07:14:04 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
07:14:04 PM #17 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
07:14:04 PM #18 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
07:14:04 PM #19 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
07:14:04 PM #20 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: No
07:14:32 PM #21 SCSI -1039 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x03370000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 0x00 0x00 0x00 0x02 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x01 0x00 0x0E 0x09 0x01
07:14:32 PM #22 CDR -1039 File Writer.cpp, Line 311
Focus or tracking error
07:14:33 PM #23 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
07:14:33 PM #24 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
07:14:33 PM #25 SCSI -1039 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x35 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x04 0x00 0x00 0x00 0x00 0x10
0x35 0x01 0x00 0x0E 0x09 0x01
07:14:38 PM #26 CDR -1039 File WriterStatus.cpp, Line 167
Focus or tracking error
HL-DT-ST DVDRAM GSA-4163B\H3 T0
07:14:38 PM #27 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
07:14:38 PM #28 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 12x (16,620 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002/07/17 08:53:02 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/08/03 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
15. February 2007 @ 20:30 |
Link to this message
|
|
|
Vijen
Newbie
|
15. February 2007 @ 22:48 |
Link to this message
|
Hi Gwendolin
Thanks for the advice. I have updated firmware and tried to write another DVD (HP DVD +R 16X). Previosly I got the error/failue during lead-in. I know get a different error but during lead-out. See log below. Thanks again for your help.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 2002/07/17 09:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2004/10/26 06:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A106 - HA 3 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 3
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG CD-ROM SC-152A >Version: CA06 - HA 0 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : SAMSUNG CD-ROM SC-152A atapi Port 0 ID 0 DMA: Off
DiskPeripheral : ST380013AS atapi Port 1 ID 0 DMA: On
DiskPeripheral : ST3160827AS atapi Port 2 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-4163B atapi Port 3 ID 0 DMA: On
=== CDRom-Device-Map ===
SAMSUNG CD-ROM SC-152A F: CDRom0
HL-DT-ST DVDRAM GSA-4163B E: CDRom3
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047280kB)
Free physical memory: 634MB (650180kB)
Memory in use : 37 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
16.2.2007
ISO compilation
10:31:15 AM #1 Text 0 File Isodoc.cpp, Line 6359
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:31:15 AM #2 Text 0 File Reader.cpp, Line 127
Reader running
10:31:15 AM #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-4163B running
10:31:15 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:31:16 AM #5 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:31:16 AM #6 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2160095 (480:01.20, 4218MB)
10:31:16 AM #7 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:31:16 AM #8 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:31:16 AM #9 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:31:16 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2160096 (2160096) = #2160096/480:1.21
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2160096 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
10:31:17 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4423876608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2160096 | lead-out | 1 | 0x41 | 0x00
10:31:17 AM #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:31:17 AM #13 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:31:17 AM #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:31:17 AM #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11,080 KB/s)
10:31:18 AM #16 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:31:18 AM #17 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: CMC.MAG.
Media type ID: M01
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 43 4D 43 20 4D - 41 47 00 4D 30 31 00 38 ...CMC.MAG.M01.8
23 54 37 18 00 3E 6E 00 - 70 62 15 15 0B 0B 08 08 #T7..>n.pb......
01 19 1B 0B 0B 0E 0F 01 - 00 00 00 00 00 00 00 00 ................
10:31:18 AM #18 Text 0 File DVDR.cpp, Line 5376
Drive: HL-DT-ST DVDRAM GSA-4163B
Book Type request [LG]: DVD-ROM
Changing the Book Type was finished successfully, return code 0
10:31:18 AM #19 CDR -1207 File DVDR.cpp, Line 5306
Book Type automatically set to: DVD-ROM
10:31:18 AM #20 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: No
10:38:33 AM #21 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-4163B> start writing Lead-Out at LBA 2160096 (20F5E0h), lenght 0 blocks
10:38:33 AM #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:40:33 AM #23 SCSI -1169 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x0E 0x04 0x08
10:42:33 AM #24 SCSI -1169 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x038C5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x02 (KEY_NOT_READY)
Sense Code: 0x04
Sense Qual: 0x08
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x02 0x00 0x00 0x00 0x00 0x10
0x00 0x00 0x00 0x0E 0x04 0x08
10:42:38 AM #25 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x02 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x3C 0x30 0x00 0x0E 0x02 0x00
10:42:38 AM #26 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0, buffer 0x038C5000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x51 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x3C 0x30 0x00 0x0E 0x02 0x00
10:42:38 AM #27 CDR -1093 File ThreadedTransferInterface.cpp, Line 1916
No seek complete
10:42:38 AM #28 TRANSFER -24 File ThreadedTransferInterface.cpp, Line 1916
Could not perform end of Disc-at-once
10:42:39 AM #29 SCSI -1093 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 3, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x02
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x3C 0x30 0x00 0x0E 0x02 0x00
10:42:39 AM #30 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:42:39 AM #31 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
10:42:39 AM #32 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
10:42:39 AM #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11,080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 2002/07/17 08:53:02 AM
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 2004/08/03 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
15. February 2007 @ 23:24 |
Link to this message
|
Quote:
Disc Manufacturer ID: CMC MAG, Media Type ID: M01, Product revision number: 0
Since you posted your last log you have changed your brand of discs, these are HORRIBLE discs and more than likely the cauase of THIS failure. I recommend and use Verbatim or Sony (made in japan)...your last discs coded out as Verbs.... MCC, Media Type ID: 004...Stick with them!!
Quote:
Burn process failed at 8x (11,080 KB/s)
Burning too fast for these crappy discs, slow to 4X which is the ONLY speed I burn at.
Quote:
CdRomPeripheral : SAMSUNG CD-ROM SC-152A atapi Port 0 ID 0 DMA: Off
Check out this guide and try to turn DMA back on
http://forums.afterdawn.com/thread_view.cfm/260038
This message has been edited since posting. Last time this message was edited on 15. February 2007 @ 23:28
|
|
Vijen
Newbie
|
15. February 2007 @ 23:32 |
Link to this message
|
|
Hi Gwendolin
I have more Verbatim's at home..will try them this evening and give you some feedback. I purchased these disks (HP DVD +R)at work hoping to solve the problem.
|
AfterDawn Addict
|
15. February 2007 @ 23:38 |
Link to this message
|
|
|
Vijen
Newbie
|
16. February 2007 @ 00:33 |
Link to this message
|
Yikes! Some of those DVD's really stink. How do you know who the actual manufacturer is when you purchase disks. I thought I was getting HP which is considered OK quality - the disks are branded HP?
Do you need an empty DVD to perform these tests with Nero. I would like to test the varius DVD's that I have but cannot get the test started (greyed out in Nero)
|
AfterDawn Addict
|
16. February 2007 @ 00:41 |
Link to this message
|
This message has been edited since posting. Last time this message was edited on 16. February 2007 @ 00:43
|
|
Advertisement
|
|
|
|
Vijen
Newbie
|
17. February 2007 @ 07:45 |
Link to this message
|
|
Hi Gwendolin
I have written 3 Verbatims successfully at 8X. Seems like the problem is solved. Thanks for your help...I will try not to buy the crappy disks again.
I managed to use CD-DVD Speed on another pc. The HP (CMC Mag) disks have 100X more errors than Verbatim and Princo that I used previously.
Thank again...Vijen
|
|
