|
|
|
2 error log´s
|
|
|
vraagje
Newbie
|
24. March 2007 @ 10:02 |
Link to this message
|
Hello everyone, can someone help me with these 2 log files?
Used media: Philips DVD+R 1-16x
---------------------------------------------------------------------
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32
NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.06 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3160812A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A I: CDRom0
HL-DT-ST DVD-ROM GDR8162B J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 466MB (478192kB)
Memory in use : 54 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.3.2007
Burn DVD Image
23:16:10 #1 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 262144KB of Memory
23:16:10 #2 Text 0 File Reader.cpp, Line 124
Reader running
23:16:10 #3 Text 0 File Writer.cpp, Line 113
Writer I: _NEC DVD_RW ND-3550A running
23:16:10 #4 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media
23:16:11 #5 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2091471 (464:46.21, 4084MB)
23:16:11 #6 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)
23:16:11 #7 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R
23:16:11 #8 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
23:16:11 #9 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2091472 (2091472) = #2091472/464:46.22
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2091472 blocks [I: _NEC DVD_RW ND-3550A]
--------------------------------------------------------------
23:16:11 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [I: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4283334656, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2091472 | 2091472 | 0x00
0 | 1 | 1 | 0x41 | 2091472 | 2091472 | 0x00
2091472 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
23:16:11 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
23:16:11 #12 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
23:16:11 #13 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.
23:16:11 #14 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
23:16:11 #15 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
23:16:11 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
23:17:15 #17 Text 0 File WriterStatus.cpp, Line 116
<I: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 2091472 (1FE9D0h), length 0 blocks
23:17:15 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
23:17:15 #19 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 49.8x (68.784 KB/s)
23:17:15 #20 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 12x (16.620 KB/s)
23:17:15 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
23:17:15 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x053f1e00: Len x804
23:17:15 #23 SPTI -1065 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
23:17:15 #24 SPTI -1065 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
23:17:15 #25 Text 0 File DVDR.cpp, Line 6871
Drive: _NEC DVD_RW ND-3550A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065
23:17:15 #26 Text 0 File DVDR.cpp, Line 6300
Drive: _NEC DVD_RW ND-3550A
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065
23:17:15 #27 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
23:20:54 #28 SPTI -1135 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 0C B3 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x04600000: Len x10000
0x02 21 F1 11 24 00 2D 10 0D A6 31 0A F3 5C B0 F3
0x0E C0 E1 3E 24 00 FC A3 2F 1A E3 61 1D D0 CD FC
0x02 45 30 8F 43 00 E0 3C 2F 22 20 DE DF 0F 11 14
23:20:54 #29 CDR -1135 File Writer.cpp, Line 302
Write error
I: _NEC DVD_RW ND-3550A
23:20:54 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
23:20:55 #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
23:20:55 #32 SPTI -1135 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
23:20:55 #33 SPTI -1176 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
23:20:55 #34 CDR -1176 File WriterStatus.cpp, Line 167
Session fixation error
I: _NEC DVD_RW ND-3550A
23:20:55 #35 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
23:20:55 #36 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 12x (16.620 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25-8-2006 4:47:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25-8-2006 4:47:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
---------------------------------------------------------------------------------------
And the 2nd log:
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2-11-2004 13:54:32
NT-SPTI used
Nero Version: 7.2.7.0
Internal Version: 7, 2, 7, 0
(Nero Express)
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.06 - HA 1 TA 0 - 7.2.7.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 7.2.7.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3160812A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A I: CDRom0
HL-DT-ST DVD-ROM GDR8162B J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (83886080) Byte
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 614MB (629496kB)
Memory in use : 39 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.3.2007
Burn DVD Image
16:17:35 #1 Text 0 File ThreadedTransfer.cpp, Line 540
ReadBuffer-Pipe got 81920KB of Memory
16:17:35 #2 Text 0 File Reader.cpp, Line 124
Reader running
16:17:35 #3 Text 0 File Writer.cpp, Line 113
Writer I: _NEC DVD_RW ND-3550A running
16:17:36 #4 Text 0 File Burncd.cpp, Line 3405
Turn on Disc-At-Once, using DVD media
16:17:36 #5 Text 0 File DlgWaitCD.cpp, Line 298
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2091471 (464:46.21, 4084MB)
16:17:36 #6 Text 0 File DlgWaitCD.cpp, Line 310
Write in overburning mode: NO (enabled: CD)
16:17:36 #7 Text 0 File DlgWaitCD.cpp, Line 2842
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R
16:17:36 #8 Text 0 File DlgWaitCD.cpp, Line 482
>>> Protocol of DlgWaitCD activities: <<<
=========================================
16:17:36 #9 Text 0 File ThreadedTransferInterface.cpp, Line 848
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2091472 (2091472) = #2091472/464:46.22
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2091472 blocks [I: _NEC DVD_RW ND-3550A]
--------------------------------------------------------------
16:17:36 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1063
Prepare recorder [I: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4283334656, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 2091472 | 2091472 | 0x00
0 | 1 | 1 | 0x41 | 2091472 | 2091472 | 0x00
2091472 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
16:17:36 #11 Text 0 File SCSIPassThrough.cpp, Line 39
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
16:17:36 #12 Phase 24 File dlgbrnst.cpp, Line 1730
Caching of files started
16:17:36 #13 Text 0 File Burncd.cpp, Line 4236
Cache writing successful.
16:17:36 #14 Phase 25 File dlgbrnst.cpp, Line 1730
Caching of files completed
16:17:36 #15 Phase 28 File dlgbrnst.cpp, Line 1730
Speed measurement started
16:17:36 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
16:18:43 #17 Text 0 File WriterStatus.cpp, Line 116
<I: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 2091472 (1FE9D0h), length 0 blocks
16:18:43 #18 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
16:18:43 #19 Phase 29 File dlgbrnst.cpp, Line 1679
Speed measurement completed: 46,1x (63.648 KB/s)
16:18:43 #20 Phase 36 File dlgbrnst.cpp, Line 1730
Burn process started at 4x (5.540 KB/s)
16:18:43 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2722
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
16:18:43 #22 SPTI -1066 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x05391e00: Len x804
16:18:43 #23 SPTI -1065 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
16:18:43 #24 SPTI -1065 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
16:18:43 #25 Text 0 File DVDR.cpp, Line 6871
Drive: _NEC DVD_RW ND-3550A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065
16:18:43 #26 Text 0 File DVDR.cpp, Line 6300
Drive: _NEC DVD_RW ND-3550A
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065
16:18:43 #27 Text 0 File DVDPlusRW.cpp, Line 662
Start write address at LBA 0
DVD high compatibility mode: Yes
16:19:14 #28 SPTI -1106 File SCSIPassThrough.cpp, Line 291
I: CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x049e0000: Len x10000
0x4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D
0x4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D
0x4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D 4D
16:19:14 #29 CDR -1106 File Writer.cpp, Line 302
Power calibration error
I: _NEC DVD_RW ND-3550A
16:19:14 #30 Text 0 File ThreadedTransfer.cpp, Line 229
all writers idle, stopping conversion
16:19:15 #31 Text 0 File ThreadedTransfer.cpp, Line 223
conversion idle, stopping reader
16:19:15 #32 Phase 127 File dlgbrnst.cpp, Line 1730
Generating DVD high compatibility borders
16:19:15 #33 Phase 129 File dlgbrnst.cpp, Line 1730
Generating DVD borders completed successfully
16:19:15 #34 Phase 38 File dlgbrnst.cpp, Line 1730
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 25-8-2006 4:47:00
File 'Drivers\PXHELP20.SYS': Ver=3.00.33a, size=36528 bytes, created 25-8-2006 4:47:00 (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
-------------------------------------------------------------------
When i use dvddycrypter set at 4x burn speed than initially the speed fluctuates between 0,5x and 3,5x...after some minutes goes at 4x only to drop back to 1x or 2x than picking up to 4x again.
Most common toaster reasons last week:
power calibration error 10x
session fixation error 5x
Something to do with the burner? Had a clean install of winxp yesterday but still threw away 5 dvd's today.
Why is the change bookmark unsuccessfull?
Thanx.
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
24. March 2007 @ 11:37 |
Link to this message
|
|
|
vraagje
Newbie
|
24. March 2007 @ 13:21 |
Link to this message
|
|
Thank you for the reply!
I have burned 100+ philips dvd's already without much problems.
Going to order some new dvd´s, will take your advice and go with verbatim or sony.
Will let you know if this sorts it, if not i'll post another log :)
|
|
vraagje
Newbie
|
30. March 2007 @ 06:33 |
Link to this message
|
Back again... 2 burned verbatims with 50% succes.
Here´s the other 50%
_---------------------------------------
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
(Nero Express)
Recorder: <_NEC DVD_RW ND-3550A> Version: 1.06 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST DVD-ROM GDR8162B>Version: 0015 - HA 1 TA 1 - 7.8.5.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : ST3120022A atapi Port 0 ID 0 DMA: On
DiskPeripheral : MAXTOR STM3160812A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-3550A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8162B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
_NEC DVD_RW ND-3550A I: CDRom0
HL-DT-ST DVD-ROM GDR8162B J: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047916kB)
Free physical memory: 611MB (626296kB)
Memory in use : 40 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.3.2007
Burn DVD Image
22:21:57 #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
22:21:57 #2 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
22:21:57 #3 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1730143 (384:28.43, 3379MB)
22:21:57 #4 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
22:21:57 #5 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: _NEC DVD_RW ND-3550A, Media type: DVD+R
22:21:57 #6 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
22:21:57 #7 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 1730144 (1730144) = #1730144/384:28.44
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1730144 blocks [I: _NEC DVD_RW ND-3550A]
--------------------------------------------------------------
22:21:57 #8 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [I: _NEC DVD_RW ND-3550A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3543334912, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1730144 | 1730144 | 0x00
1730144 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
22:21:57 #9 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
22:21:57 #10 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
22:21:57 #11 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
22:21:57 #12 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
22:21:57 #13 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
22:21:57 #14 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started
22:21:57 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22:21:57 #16 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
22:24:06 #17 Text 0 File WriterStatus.cpp, Line 113
<I: _NEC DVD_RW ND-3550A> start writing Lead-Out at LBA 1730144 (1A6660h), length 0 blocks
22:24:06 #18 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 19.4x (26.866 KB/s)
22:24:06 #19 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5.540 KB/s)
22:24:06 #20 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
22:24:06 #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x05f41100: Len x804
22:24:06 #22 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 15 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
22:24:06 #23 SPTI -1065 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xF9 14 01 FF 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
22:24:06 #24 Text 0 File DVDR.cpp, Line 7281
Drive: _NEC DVD_RW ND-3550A
Book Type request [gen]: DVD-ROM, write to EEPROM
Changing the Book Type was finished with error, return code -1065
22:24:06 #25 Text 0 File DVDR.cpp, Line 6662
Drive: _NEC DVD_RW ND-3550A
Book Type request [NEC]: DVD-ROM
Changing the Book Type was finished with error, return code -1065
22:24:07 #26 Text 0 File DVDPlusRW.cpp, Line 674
Start write address at LBA 0
DVD high compatibility mode: Yes
22:24:07 #27 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
22:24:34 #28 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x07720040: Len x10000
0x1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D
0x1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D
0x1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D 1D
22:24:34 #29 CDR -1106 File Writer.cpp, Line 303
Power calibration error
I: _NEC DVD_RW ND-3550A
22:24:35 #30 Phase 127 File dlgbrnst.cpp, Line 1762
Generating DVD high compatibility borders
22:24:35 #31 Text 0 File DVDPlusRW.cpp, Line 934
EndDAO: Last written address 0
22:24:35 #32 Phase 129 File dlgbrnst.cpp, Line 1762
Generating DVD borders completed successfully
22:24:35 #33 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5.540 KB/s)
22:24:35 #34 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
22:24:39 #35 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
22:24:39 #36 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Afraid to try a dual layerd dvd with this success rate :(
|
|
vraagje
Newbie
|
30. March 2007 @ 06:54 |
Link to this message
|
|
Sorry about the double posting but i can only find a edit thread title button, not edit message. Maybe i need some glasses :)
Just installed wnaspi32.dll into my system32 folder and into program files blabla\Core\... will that help?
|
Senior Member
|
30. March 2007 @ 07:31 |
Link to this message
|
the eidt button, is at the top right of the post next to (Link to this Message)
r u using 16x verbs? if so those are made to be burnt at higher speed, try 8x,
BTW, for burning DL disks i would recommend IMGburn which IMO is much better than Nero at handling the layer break.
although right now IMGburn website is down, so u have to wait awhile to DL it.
"When I look at the smiles on all the childrens faces, I just know theyre about to jab me with something."- Homer Simpson |
|
vraagje
Newbie
|
30. March 2007 @ 14:38 |
Link to this message
|
Thank you for the info! And yes started using them verbs just this week. The philips dvd's worked pretty good up untill half way through my spindle, did have an occasional coaster now and then but this was just like 7 or 8 in a row before succesfull burn.
Should have checked this forum earlier, i ordered philips DVD+R DL
about 1,5 week ago and i can't get Nero or DVD Decrypter to burn anything on them. Well first 2 out of 5...and those dl's don't come cheap :)
I must say that i get more coasters when i burned at 4x still using philips DVD+R dvd's.
And for pointing out where the edit button is located. Stupid me, i only looked everywhere on the page looking for the edit text, not realising it's a button w00t!
Also thank you for the heads up about IMGBurn, i will definately look into that. It will be almost a week before i get the dual layers so that should give me enough time to figure things out!
Guess i could practice some with the 3 remaining philips dl's ;)
Will check back here in case of problems :)
This message has been edited since posting. Last time this message was edited on 30. March 2007 @ 14:48
|
AfterDawn Addict
|
30. March 2007 @ 15:26 |
Link to this message
|
|
I see you decided to upgrade to 7.8.5.0.....I am currently using 7.5.9.0 (the one in the link provided) with NO problems to date...I am not too keen to upgrade to the newer versions, quite a few logs submitted containing errors.
|
|
Advertisement
|
|
|
|
vraagje
Newbie
|
31. March 2007 @ 06:11 |
Link to this message
|
|
Yes, i still had the installer sitting on my hd so went with that one.
I'll give that one or two more chances and see if there still are problems, i thought newer is better :)
Gonna try imgburn first, didn't even know this was from the person who made dvddycypter.
|
|
