|
|
|
Yet another Illegal disc
|
|
|
suspect13
Newbie
|
1. April 2007 @ 02:48 |
Link to this message
|
Hi guys,
I, like so many other users, am getting the illegal disc error when attempting to burn a DVD. I just upgraded my firmware, got the Nero updates, and even tried another burning program (ImgBurn 2.3.0.0) - all with no success. DMA is on.
Things were working fine before today, but it's a new spindle of DVD's (BenQ 16x DVD-R). I'm guessing I purchased the 'wrong' brand. I'm running a Dell D610 with an NEC ND-6650A drive. Any suggestions would be most appreciated. Log below. Thanks!
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6650A> Version: 103D - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 103D - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HTS721080G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6650A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096500kB)
Free physical memory: 1361MB (1393916kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.4.2007
UDF/ISO compilation
6:50:14 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:50:14 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
6:50:14 PM #3 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
6:50:14 PM #4 Text 0 File Isodoc.cpp, Line 6494
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:50:14 PM #5 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
6:50:14 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:50:14 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:50:14 PM #8 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
6:50:14 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
6:50:14 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:50:14 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD-R
Disc Manufacturer: DAXON0 - 16S
Disc Application Code: 64, Disc Physical Code: 193
6:50:14 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:50:14 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2286096 (2286096) = #2286096/508:1.21
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2286096 blocks [_NEC DVD+-RW ND-6650A]
--------------------------------------------------------------
6:50:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [_NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4681924608, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2286096 | lead-out | 1 | 0x41 | 0x00
6:50:14 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:50:15 PM #16 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
6:50:15 PM #17 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
6:50:15 PM #18 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
6:50:15 PM #19 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3,324 KB/s)
6:50:15 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:50:15 PM #21 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode
6:50:15 PM #22 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes
6:50:15 PM #23 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:50:15 PM #24 SPTI -1046 File SCSIPassThrough.cpp, Line 178
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 22 E2 10 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
6:50:15 PM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1767
Illegal disc
E: _NEC DVD+-RW ND-6650A
6:50:15 PM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1767
Could not perform start of Disc-at-once
6:50:15 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)
6:50:15 PM #28 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:50:19 PM #29 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
6:50:19 PM #30 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 5/10/2006 12:42:42 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 28/09/2006 7:53:22 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
1. April 2007 @ 05:51 |
Link to this message
|
your version of Nero 6 is not the stablest version.... 6.6.0.18 is the most stablest version of Nero 6 and I would update it to that version. Here's how:
Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html
then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot!
install package one:
http://www.filehippo.com/download_nero_burning_rom/?539
then install package two:
http://www.nero.com/nero6/eng/Patch_for_NVE3.html
reboot and you're good to go!
also I would use better media. Stick with the MIJ rule (Made In Japan). Look for the MIJ on the label of the box of spindle (Taiyo Yuden, Sony, Maxell, and some Fuji)... the only exception to this rule is Verbatim, which is top notch media but made in Taiwan/Singapore and the only non MIJs I will use. That's why you got this:
Illegal disc with this crappy media Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD-R
Disc Manufacturer: DAXON0 - 16S
Quote:
6:50:15 PM #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3,324 KB/s)
burning too slowly is just as bad as burning too fast! Burn at 4x - 8x! Using better media will allow you to pick these burn speeds.
Quote:
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2286095 (508:01.20, 4465MB)
you are burning too close to the edge of the disk using crappy media! Adjust this to no more than 4400MB and some members even adjust this lower to 4300MB. But, if you're using quality media burning at 4400MB should be no problem!
Quote:
Drivers\CDRALW2K.SYS'
this is a Roxio/Sonic driver that interferes with Nero burning DVDs! uninstall Roxio/Sonic programs when having problems with Nero! then use the Roxio zapper to make sure everything is out of your computer:
http://www.softpedia.com/get/Tweak/Uninstallers/Roxio-Zap.shtml
try these recommendations and you'll get better results!
|
|
suspect13
Newbie
|
2. April 2007 @ 14:41 |
Link to this message
|
Thanks for the response, but still no joy.
I uninstalled, cleaned, defragged, and installed the Nero version suggested, but still got the same error. I did not install the patch though as the FTP server has been down for at least 12 hours. Will continue to try throughout the day.
I know I found it with my previous version of Nero, but I can't seem to adjust the drive speed up. It is set to 'maximum', yet still tries to burn at the lower speed. Perhaps it detects poor media? I also lowered the file size so that I'm only burning 4GB.
Any suggestions or wait until the patch becomes available? I am burning DVD video files. Thanks.
-------------
Log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <_NEC DVD+-RW ND-6650A> Version: 103D - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <_NEC DVD+-RW ND-6650A>Version: 103D - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Hitachi HTS721080G9AT00 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+-RW ND-6650A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
_NEC DVD+-RW ND-6650A E: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2047MB (2096500kB)
Free physical memory: 1358MB (1390796kB)
Memory in use : 33 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.4.2007
UDF/ISO compilation
8:34:34 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
8:34:34 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
8:34:34 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
8:34:34 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
8:34:34 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
8:34:34 AM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:34:34 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
8:34:34 AM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
8:34:34 AM #9 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2202127 (489:21.52, 4301MB)
8:34:34 AM #10 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
8:34:34 AM #11 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+-RW ND-6650A, Media type: DVD-R
Disc Manufacturer: DAXON0 - 16S
Disc Application Code: 64, Disc Physical Code: 193
8:34:34 AM #12 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:34:34 AM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202128 (2202128) = #2202128/489:21.53
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202128 blocks [_NEC DVD+-RW ND-6650A]
--------------------------------------------------------------
8:34:34 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+-RW ND-6650A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509958144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202128 | lead-out | 1 | 0x41 | 0x00
8:34:35 AM #15 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
8:34:35 AM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
8:34:35 AM #17 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
8:34:35 AM #18 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
8:34:35 AM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
8:34:35 AM #20 Text 0 File DVDR.cpp, Line 2571
Recording mode: Sequential Recording Mode
8:34:35 AM #21 Text 0 File Mmc.cpp, Line 21774
Set BUFE: JustLink -> ON
8:34:35 AM #22 Text 0 File DVDR.cpp, Line 2726
Start write address at LBA 0
DVD high compatibility mode: Yes
8:34:35 AM #23 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
8:34:35 AM #24 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x21 0x9A 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
8:34:35 AM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
8:34:35 AM #26 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1778
Could not perform start of Disc-at-once
8:34:35 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=3.00.41a, size=36560 bytes, created 28/09/2006 7:53:22 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 9:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
2. April 2007 @ 18:08 |
Link to this message
|
Quote:
8:34:35 AM #25 CDR -1046 File ThreadedTransferInterface.cpp, Line 1778
Illegal disc
you are still using crappy media...... get better media! like I said before in the first reply! Quote:
also I would use better media. Stick with the MIJ rule (Made In Japan). Look for the MIJ on the label of the box of spindle (Taiyo Yuden, Sony, Maxell, and some Fuji)... the only exception to this rule is Verbatim, which is top notch media but made in Taiwan/Singapore and the only non MIJs I will use.
if you don't use better media then you can expect more of the same results!COASTERS! OR CAN NOT BURN PROJECT HALTED!
|
|
suspect13
Newbie
|
2. April 2007 @ 19:54 |
Link to this message
|
|
Yup, that was it. I went back and exchanged my crappo DVD's for a stack of TDK's. All is good now. Thanks again...
|
|
sublimewb
Newbie
|
2. April 2007 @ 20:13 |
Link to this message
|
Hi guys..another "Illegal Disc" issue..sorry! I read a 13 page thread earlier then a fiver a little while back.. Still have a question though if someone might have some time to throw at it. Trying to simply burn a DVD-ISO with Nero of a couple of .avi files I have. Only using like 3300Mb on the compilation. I use it in a DVD player I have that processes DivX so I don't need to spend time encoding things to dvd, just toss the AVI on a blank and watch it in the living room..until now. I have been doing this for three years now. I know I probably have crappy media, but I bought a spindle of 100 and I can't believe my drive won't even attempt to burn to one of them. I have tried several. I don't need the disc to last even the evening, just burn successfully. Here's my log if you see anything...
btw, because of reading your older threads, I'm up to the newest firmware on my NEC drive..newest Nero..etc.. Okay, enough talk, here's the log..
--------------------------
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <_NEC DVD_RW ND-1300A> Version: 1.0C - HA 1 TA 1 - 7.8.5.0
Adapter driver: <USB 2.0> HA 1
Drive buffer : 2048kB
Bus Type : set to ATAPI (3) -> ATAPI, detected: ?
CD-ROM: <MATSHITA CDRW/DVD UJDA740>Version: 1.03 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : HITACHI_DK23EA-30 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : MATSHITA CDRW/DVD UJDA740 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
MATSHITA CDRW/DVD UJDA740 D: CDRom0
_NEC DVD_RW ND-1300A E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523704kB)
Free physical memory: 294MB (301416kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.4.2007
ISO compilation
11:15:13 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:15:14 PM #2 Text 0 File Isodoc.cpp, Line 6608
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 2 (Max. of 31 chars)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
11:15:14 PM #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
11:15:14 PM #4 Text 0 File Burncd.cpp, Line 3499
Turn on Disc-At-Once, using DVD media
11:15:14 PM #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1531711 (340:22.61, 2991MB)
11:15:14 PM #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
11:15:14 PM #7 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: _NEC DVD_RW ND-1300A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
11:15:14 PM #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:15:14 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1531712 (1531712) = #1531712/340:22.62
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1531712 blocks [E: _NEC DVD_RW ND-1300A]
--------------------------------------------------------------
11:15:14 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [E: _NEC DVD_RW ND-1300A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3136946176, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1531712 | 0 | 0x00
1531712 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
11:15:14 PM #11 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:15:14 PM #12 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-No, small files-No (<64KB)
11:15:14 PM #13 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
11:15:14 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:15:14 PM #15 Text 0 File DVDR.cpp, Line 3192
Recording mode: Sequential Recording Mode
11:15:14 PM #16 Text 0 File DVDR.cpp, Line 3348
Start write address at LBA 0
DVD high compatibility mode: Yes
11:15:14 PM #17 Text 0 File Cdrdrv.cpp, Line 9859
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 2.1 (33)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: 6.0
Revision number of minimum recording speed: -
Revision number table of recording speed: 1.0 2.0 3.0 4.0 5.0 - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
11:15:14 PM #18 SPTI -1046 File SCSIPassThrough.cpp, Line 179
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 00 00 00 00 00 17 5F 40 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 30 05
11:15:14 PM #19 CDR -1046 File ThreadedTransferInterface.cpp, Line 1752
Illegal disc
E: _NEC DVD_RW ND-1300A
11:15:14 PM #20 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1752
Could not perform start of Disc-at-once
11:15:15 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
11:15:15 PM #22 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)
11:15:15 PM #23 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:15:18 PM #24 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
11:15:18 PM #25 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
3. April 2007 @ 01:18 |
Link to this message
|
@sublimewb.......your NEC drive is now 3 yrs old with no more firmware updates. If you bought a spindle of newer media that it doesn't recognize then I would bring it back and get some media that did work for your drive! Quote:
I have been doing this for three years now
then I would continue to do it the same way with the same media that you always used. Get rid of the newer media because it won't work on your drive because your drive needs a firmware update to try to burn newer media and there isn't any! Either go back to the old media that you've been using and were successful with or get a newer drive to burn the newer media out there!
|
|
sublimewb
Newbie
|
3. April 2007 @ 07:23 |
Link to this message
|
|
Is it possible to use a third party firmware..or to update the drive myself in some way to recognize new media? I understand its three years old, but I would hate to have to buy a new burner every time a few years goes by and someone finds a way to make new blanks. What company supports their drives with firmware updates the longest? NEC looks to be about two years which seems very short and hard on the consumer.
|
AfterDawn Addict
|
3. April 2007 @ 08:30 |
Link to this message
|
|
hey don't ask me..... I just bought my BenQ 1655 last year and they are not producing any more DVD burners so they won't be updating the firmware again. soooooo because of that and my burner being fairly new I am stockpiling my blank DVDs that work great with my BenQ 1655...... I have about 450 Taiyo Yuden disks now just waiting to be burned! LOL and every week I buy more!
|
|
Car.Mike
AfterDawn Addict
|
3. April 2007 @ 16:06 |
Link to this message
|
|
sublimewb,
I bought a NEC-1300 about 4+ years ago and like IHOE stated no new firmware. Nec had the firmware for about 2 1/2 years for that burner which is really long. When the new media comes out some companies will update the firmware for a short while but then stop w/ the updates. This is their way of telling you if you want to use the faster blank media then you will have to buy another burner. Both Meritline.com and NewEgg.com have either Pioneer or NEC burners for a little over $30.00 US.
You can forget trying to find firmware for that burner from a 3rd party as I looked before I gave the burner to a charity.
This message has been edited since posting. Last time this message was edited on 3. April 2007 @ 16:07
|
|
sublimewb
Newbie
|
3. April 2007 @ 17:25 |
Link to this message
|
|
O.K. Thanks guys. Appreciate the help.. Too bad. Things used to be more than just about money for these companies.
|
AfterDawn Addict
|
3. April 2007 @ 18:22 |
Link to this message
|
|
@sublimewb......when wasn't a companies bottom line NOT meant anything!? All companies out there are meant to do business and make money. If after a couple of years you can get the customer to buy again and spend more money....... then you have a profitable company! Just ask Microsoft and how many times Gates makes changes to Windows!!!! Soooooooo get used to big business making us comsumers buy again and again for the same things!
Sooooooo what drive are you going to get???
|
|
sublimewb
Newbie
|
4. April 2007 @ 15:53 |
Link to this message
|
|
Well, I just picked up 10pack of 4x discs from a local pharmacy..on the back shelf covered with dust.. haha.. I probably go through ten in three or four days, so I am going to need that drive soon. Any DVD burners come with the lightscribe ability that anyone knows of? I recently saw a friend who had an HP CD burner that could label CD's..would be nice to have a DVD burner that could do that, beats my horrible handwriting with the sharpie (and I'm too cheap to waste ink on labels unless its going to a friend or family member)...
|
AfterDawn Addict
|
4. April 2007 @ 16:05 |
Link to this message
|
http://forums.afterdawn.com/thread_view.cfm/490213
check out what BBMayo has to say about new burners! he's been a real AfterDawn Addict here for years now.... and you should heed his advice! I do and it made me a better DVD burning fool! LOL read and you shall learn!
|
|
fleeze
Newbie
|
6. April 2007 @ 17:18 |
Link to this message
|
I too am experiencing the Illegal Disk Error. I just started using Nero and am not sure what is going wrong. Here is a copy of my log:
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Nero\Nero 7\Core\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero Version: 7.0.0.0
Recorder: <PHILIPS DVD+RW SDVD6004> Version: 1.06 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <PHILIPS DVD+RW SDVD6004 >Version: 1.06 - HA 1 TA 0 - 7.0.0.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD800UE-00HCT0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : PHILIPS DVD+RW SDVD6004 atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
PHILIPS DVD+RW SDVD6004 D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523496kB)
Free physical memory: 109MB (112276kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
5.4.2007
UDF/ISO compilation
9:38:51 PM #1 Phase 112 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation started
9:38:51 PM #2 Phase 114 File dlgbrnst.cpp, Line 1724
DVD-Video files reallocation completed (no file modified)
9:38:51 PM #3 Text 0 File Isodoc.cpp, Line 6410
UDF document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:38:51 PM #4 Phase 111 File dlgbrnst.cpp, Line 1724
DVD-Video files sorted
9:38:51 PM #5 Text 0 File ThreadedTransfer.cpp, Line 525
ReadBuffer-Pipe got 262144KB of Memory
9:38:51 PM #6 Text 0 File Reader.cpp, Line 124
Reader running
9:38:51 PM #7 Text 0 File Writer.cpp, Line 113
Writer D: PHILIPS DVD+RW SDVD6004 running
9:38:51 PM #8 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
9:38:51 PM #9 ISO9660GEN -11 File Geniso.cpp, Line 3304
First writeable address = 0 (0x00000000)
9:38:51 PM #10 Text 0 File Burncd.cpp, Line 3301
Turn on Disc-At-Once, using DVD media
9:38:52 PM #11 Text 0 File DlgWaitCD.cpp, Line 277
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1456463 (323:39.38, 2844MB)
9:38:52 PM #12 Text 0 File DlgWaitCD.cpp, Line 289
Write in overburning mode: NO (enabled: CD)
9:38:52 PM #13 Text 0 File DlgWaitCD.cpp, Line 2568
Recorder: PHILIPS DVD+RW SDVD6004, Media type: DVD+R
9:38:52 PM #14 Text 0 File DlgWaitCD.cpp, Line 456
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:38:52 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 846
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1456464 (1456464) = #1456464/323:39.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1456464 blocks [D: PHILIPS DVD+RW SDVD6004]
--------------------------------------------------------------
9:38:52 PM #16 Text 0 File ThreadedTransferInterface.cpp, Line 1058
Prepare recorder [D: PHILIPS DVD+RW SDVD6004] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 2982838272, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1456464 | lead-out | 1 | 0x41 | 0x00
9:38:52 PM #17 Text 0 File SCSIPassThrough.cpp, Line 34
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:38:52 PM #18 Phase 24 File dlgbrnst.cpp, Line 1724
Caching of files started
9:38:52 PM #19 Text 0 File Burncd.cpp, Line 4129
Cache writing successful.
9:38:52 PM #20 Phase 25 File dlgbrnst.cpp, Line 1724
Caching of files completed
9:38:52 PM #21 Phase 28 File dlgbrnst.cpp, Line 1724
Speed measurement started
9:38:52 PM #22 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:41:55 PM #23 Text 0 File WriterStatus.cpp, Line 116
<D: PHILIPS DVD+RW SDVD6004> start writing Lead-Out at LBA 1456464 (163950h), length 0 blocks
9:41:56 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:41:56 PM #25 Phase 29 File dlgbrnst.cpp, Line 1673
Speed measurement completed: 12.8x (17,710 KB/s)
9:41:56 PM #26 Phase 36 File dlgbrnst.cpp, Line 1724
Burn process started at 2.4x (3,324 KB/s)
9:41:57 PM #27 Text 0 File ThreadedTransferInterface.cpp, Line 2669
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:41:57 PM #28 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 24
Buffer x045cb200: Len x804
9:41:57 PM #29 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
9:42:29 PM #30 SPTI -1046 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1046)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0C 00 00 00 00 30 05
Buffer x04940000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
9:42:29 PM #31 CDR -1046 File Writer.cpp, Line 302
Illegal disc
D: PHILIPS DVD+RW SDVD6004
9:42:29 PM #32 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:42:30 PM #33 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
9:42:30 PM #34 SPTI -1066 File SCSIPassThrough.cpp, Line 306
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x71 00 05 00 00 00 00 0C 00 00 00 00 24
9:42:30 PM #35 Phase 127 File dlgbrnst.cpp, Line 1724
Generating DVD high compatibility borders
9:42:30 PM #36 CDR -1066 File WriterStatus.cpp, Line 167
Invalid field in command
D: PHILIPS DVD+RW SDVD6004
9:42:30 PM #37 TRANSFER -24 File WriterStatus.cpp, Line 167
Could not perform end of Disc-at-once
9:42:30 PM #38 Phase 38 File dlgbrnst.cpp, Line 1724
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 2/13/2006 7:00:00 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.15B, size=46080 bytes, created 2/13/2006 7:00:00 AM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Car.Mike
AfterDawn Addict
|
6. April 2007 @ 17:29 |
Link to this message
|
|
fleeze,
Your burner is a little old and w/ the newer blank media the firmware on the burner is really not understanding how to write to the blank media. Since this is a laptop burner you can replace it but since the burner is 3+ years old you might just want to replace the laptop. You laptop is seeing this disk as an Illegal disk.
Also you need to cutoff all unneeded processes that you are not using as you only have 109MB left in memory to use out of 512MB
This message has been edited since posting. Last time this message was edited on 6. April 2007 @ 17:30
|
|
fleeze
Newbie
|
6. April 2007 @ 20:52 |
Link to this message
|
|
Car.Mike,
thank you. ill do what i can with these suggestions. thank you for you time!
|
|
fleeze
Newbie
|
7. April 2007 @ 12:00 |
Link to this message
|
|
Car.Mike,
Do you have any suggestions about what to get or where to get an updated drive?
|
|
Car.Mike
AfterDawn Addict
|
7. April 2007 @ 14:44 |
Link to this message
|
|
fleeze,
The easiest way for you would be to go to a MOM and POP Computer store in your town and see what they recommend. If you have never installed a drive in your laptop then you will have to pay someone to do it. If you can find them Pioneer, NEC, and LG make pretty good ones. You might also look at Meritline.com and see what they have to offer.
|
|
Advertisement
|
|
|
|
fleeze
Newbie
|
7. April 2007 @ 15:30 |
Link to this message
|
|
Car.Mike,
Thanks for your suggestions. I'll look into them.
|
|
