|
|
|
My LG dvdrw cannot burn??
|
|
|
HauntedPu
Newbie
|
11. April 2007 @ 22:41 |
Link to this message
|
I have a LG super multi DVD/CD rewriter, and resently I encountered a problem.
I can't burn any cd/dvd either by Nero or Clone dvd or any other burning program.
Specifically when I try to burn dvds in Nero, the proceedure is cancelled at 1%, and a message appears as shown in this thread.
I used to burn dvds in a particular version of Nero, with certain dvd discs (brands) and never had any problem..
It's been a few days now that nothing can be burned either by Nero or Clone DVD or any other program.
I even tried different write speeds but with no positive result...
The question I want to raise is if it something to do with the options/preferances of my pc or something with my LG's lens..
To my surprise, half an hour ago I tried to burn a dvd and everything went well...
After that, my second attempt to burn another dvd once again resulted to my disappointment.
I don't know if the problem will persist, or it was just a 5-day rest of my LG but any help would be appreciated...
Luckily I'm still on guarrantee!!
Thank you!!!
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
11. April 2007 @ 22:51 |
Link to this message
|
|
As suggested in the other thread can you post a history log.
|
|
HauntedPu
Newbie
|
11. April 2007 @ 22:59 |
Link to this message
|
Thank you for your quick responce.
I am a completely ignorant when it comes to Nero.. how do I do that??
|
AfterDawn Addict
|
12. April 2007 @ 00:54 |
Link to this message
|
Nero history logs are located here
Nero 6 history log location: Program Files>Ahead>Nero>NeroHistory.txt
Nero 7 history log location: Program Files>Nero>Nero 7>Core>NeroHistory
Just cut and paste log into message box.
|
|
HauntedPu
Newbie
|
12. April 2007 @ 01:17 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero API version: 6.6.0.3
Using interface version: 6.3.1.4
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\Nero - Burning Rom
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 213MB (218120kB)
Memory in use : 58 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.3.2007
NeroAPI
12:47:13 μμ #1 Text 0 File Reader.cpp, Line 127
Reader running
12:47:13 μμ #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
12:47:13 μμ #3 Text 0 File AudioCompilationImpl.cpp, Line 842
DRM: StartDrmRecording(RealRec:1, ImageRec:0, Copies:1)
DRM: Beginning burn process.
12:47:13 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:47:13 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
12:47:13 μμ #6 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-At-Once, using DVD media
12:47:14 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2232713 (496:09.38, 4360MB)
12:47:14 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO
12:47:14 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: INFOME, Media Type ID: R30, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:47:14 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:47:14 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2232864 (2232864) = #2232864/496:11.39
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2232864 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
12:47:14 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 277938176, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2232864 | lead-out | 1 | 0x41 | 0x00
12:47:15 μμ #13 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
12:47:15 μμ #14 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
12:47:15 μμ #15 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
12:47:15 μμ #16 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 4x (5.540 KB/s)
12:47:15 μμ #17 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:47:15 μμ #18 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: INFOME..
Media type ID: R30
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 49 4E 46 4F 4D - 45 00 00 52 33 30 00 38 ...INFOME..R30.8
23 54 37 13 02 52 6C 02 - 7C 5D 15 15 0B 0A 08 08 #T7..Rl.|]......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:47:15 μμ #19 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: No
1:01:33 μμ #20 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2232864 (221220h), lenght 0 blocks
1:01:33 μμ #21 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
1:02:08 μμ #22 Phase 37 File APIProgress.cpp, Line 276
Burn process completed successfully at 4x (5.540 KB/s)
1:02:09 μμ #23 Text 0 File AudioCompilationImpl.cpp, Line 867
DRM: DRM burn session terminated.
1:02:09 μμ #24 Text 0 File AudioCompilationImpl.cpp, Line 896
DRM: Closing entire DRM handling. Bye.
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
[26.03.2007]------------------------------------
12:47:12 Robot error messages from:
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 168MB (172264kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.3.2007
CD-ROM (ISO)
3:43:29 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
3:43:29 μμ #2 Text 0 File Burncd.cpp, Line 2866
HL-DT-ST DVDRAM GSA-H10N
Buffer underrun protection activated
3:43:30 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running
3:43:30 μμ #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
3:43:30 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
3:43:30 μμ #6 Text 0 File Burncd.cpp, Line 3151
Turn on Track-at-once, using CD-R/RW media
3:43:30 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 19386 ( 4:20.36)
3:43:30 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
3:43:30 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
3:43:30 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
3:43:30 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 19387 (19387) = #19387/4:18.37
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 19385 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
3:43:30 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 40011776, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
19387 | lead-out | 1 | 0x41 | 0x00
3:43:30 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105
Removed 2 run-out blocks from end of track 1. Length: 19387 -> 19385.
3:43:30 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
3:43:30 μμ #15 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
3:43:30 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
3:43:30 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 48x (7.200 KB/s)
3:43:30 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
3:43:30 μμ #19 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON
3:43:58 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:44:02 μμ #21 Text 0 File Mmc.cpp, Line 15737
<HL-DT-STDVDRAM GSA-H10N > start Close Session
3:44:22 μμ #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 48x (7.200 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 164MB (168724kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.3.2007
ISO compilation
4:11:11 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
4:11:11 μμ #2 Text 0 File Reader.cpp, Line 127
Reader running
4:11:11 μμ #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
4:11:11 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
4:11:11 μμ #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
4:11:12 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1989721 (442:09.46, 3886MB)
4:11:12 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
4:11:12 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
4:11:12 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
4:11:12 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1989872 (1989872) = #1989872/442:11.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1989872 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
4:11:12 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4075257856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1989872 | lead-out | 1 | 0x41 | 0x00
4:11:13 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
4:11:13 μμ #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
4:11:13 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
4:11:13 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)
4:11:13 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
4:11:13 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
4:11:13 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
4:23:41 μμ #19 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 1989872 (1E5CF0h), lenght 0 blocks
4:23:42 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
4:24:17 μμ #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 177MB (181872kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.3.2007
ISO compilation
5:52:51 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:52:51 μμ #2 Text 0 File Reader.cpp, Line 127
Reader running
5:52:51 μμ #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
5:52:51 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
5:52:51 μμ #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
5:52:52 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 744665 (165:28.65, 1454MB)
5:52:52 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
5:52:52 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
5:52:52 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:52:52 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 744816 (744816) = #744816/165:30.66
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 744816 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
5:52:52 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 1525383168, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
744816 | lead-out | 1 | 0x41 | 0x00
5:52:52 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:52:52 μμ #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
5:52:52 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:52:52 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)
5:52:52 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:52:52 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
5:52:52 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
5:57:40 μμ #19 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 744816 (B5D70h), lenght 0 blocks
5:57:40 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:58:20 μμ #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 157MB (161680kB)
Memory in use : 69 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2007
ISO compilation
2:42:19 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:42:20 μμ #2 Text 0 File Reader.cpp, Line 127
Reader running
2:42:20 μμ #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
2:42:20 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:42:20 μμ #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
2:42:20 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283241 (507:23.16, 4459MB)
2:42:20 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
2:42:20 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
2:42:20 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:42:20 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
2:42:20 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283392 | lead-out | 1 | 0x41 | 0x00
2:42:20 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:42:20 μμ #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
2:42:20 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:42:20 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 12x (16.620 KB/s)
2:42:20 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:42:20 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
2:42:20 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
2:48:26 μμ #19 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2283392 (22D780h), lenght 0 blocks
2:48:26 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
2:48:45 μμ #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 12x (16.620 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 177MB (182224kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2007
CD-ROM (ISO)
2:57:20 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
2:57:20 μμ #2 Text 0 File Burncd.cpp, Line 2866
HL-DT-ST DVDRAM GSA-H10N
Buffer underrun protection activated
2:57:20 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running
2:57:20 μμ #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
2:57:20 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
2:57:20 μμ #6 Text 0 File Burncd.cpp, Line 3151
Turn on Track-at-once, using CD-R/RW media
2:57:20 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 294731 ( 65:31.56)
2:57:20 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
2:57:20 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
2:57:20 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
2:57:20 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 294732 (294732) = #294732/65:29.57
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 294730 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
2:57:20 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 603918336, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
294732 | lead-out | 1 | 0x41 | 0x00
2:57:20 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105
Removed 2 run-out blocks from end of track 1. Length: 294732 -> 294730.
2:57:20 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
2:57:21 μμ #15 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
2:57:21 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
2:57:21 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (1.200 KB/s)
2:57:21 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
2:57:21 μμ #19 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON
3:05:38 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
3:05:42 μμ #21 Text 0 File Mmc.cpp, Line 15737
<HL-DT-STDVDRAM GSA-H10N > start Close Session
3:06:18 μμ #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (1.200 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 100MB (102452kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
29.3.2007
CD-ROM (ISO)
5:03:27 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
5:03:27 μμ #2 Text 0 File Burncd.cpp, Line 2866
HL-DT-ST DVDRAM GSA-H10N
Buffer underrun protection activated
5:03:27 μμ #3 Text 0 File Reader.cpp, Line 127
Reader running
5:03:27 μμ #4 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
5:03:27 μμ #5 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
5:03:27 μμ #6 Text 0 File Burncd.cpp, Line 3151
Turn on Track-at-once, using CD-R/RW media
5:03:27 μμ #7 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 359848 ( 79:59.73)
Last address to be written: 245102 ( 54:30.02)
5:03:27 μμ #8 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
5:03:27 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N;
CDR code: 00 97 27 18; OSJ entry from: Plasmon Data systems Ltd.
ATIP Data:
Special Info [hex] 1: D0 00 A0, 2: 61 1B 12 (LI 97:27.18), 3: 4F 3B 4A (LO 79:59.74)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
5:03:27 μμ #10 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:03:27 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 245103 (245103) = #245103/54:28.3
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 245101 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
5:03:27 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 502278144, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0x00
-150 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
245103 | lead-out | 1 | 0x41 | 0x00
5:03:27 μμ #13 Text 0 File ThreadedTransferInterface.cpp, Line 1105
Removed 2 run-out blocks from end of track 1. Length: 245103 -> 245101.
5:03:27 μμ #14 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
5:03:28 μμ #15 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
5:03:28 μμ #16 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
5:03:28 μμ #17 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (1.200 KB/s)
5:03:28 μμ #18 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:03:28 μμ #19 Text 0 File Mmc.cpp, Line 21025
Set BUFE: Buffer underrun protection -> ON
5:10:24 μμ #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
5:10:31 μμ #21 Text 0 File Mmc.cpp, Line 15737
<HL-DT-STDVDRAM GSA-H10N > start Close Session
5:11:07 μμ #22 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (1.200 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 97MB (100124kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
10.4.2007
Burn DVD Image
10:26:27 πμ #1 Text 0 File Reader.cpp, Line 127
Reader running
10:26:27 πμ #2 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
10:26:27 πμ #3 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
10:26:28 πμ #4 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2181727 (484:49.52, 4261MB)
10:26:28 πμ #5 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
10:26:28 πμ #6 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: INFOME, Media Type ID: R30, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:26:28 πμ #7 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:26:28 πμ #8 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (2 - CD-ROM Mode 1, ISO 9660)
2 indices, index0 (150) not provided
original disc pos #0 + 2181878 (2181878) = #2181878/484:51.53
not relocatable, disc pos for caching/writing not required/not required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2181878 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
10:26:28 πμ #9 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 173518848, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2181878 | lead-out | 1 | 0x41 | 0x00
10:26:28 πμ #10 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
10:26:28 πμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
10:26:28 πμ #12 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: INFOME..
Media type ID: R30
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 49 4E 46 4F 4D - 45 00 00 52 33 30 00 38 ...INFOME..R30.8
23 54 37 13 02 52 6C 02 - 7C 5D 15 15 0B 0A 08 08 #T7..Rl.|]......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:26:28 πμ #13 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: No
10:34:06 πμ #14 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2181878 (214AF6h), lenght 0 blocks
10:34:07 πμ #15 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:34:27 πμ #16 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 111MB (114188kB)
Memory in use : 78 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.4.2007
ISO compilation
7:17:30 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:17:30 μμ #2 Text 0 File Reader.cpp, Line 127
Reader running
7:17:30 μμ #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
7:17:30 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
7:17:30 μμ #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
7:17:31 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283241 (507:23.16, 4459MB)
7:17:31 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
7:17:31 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
7:17:31 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:17:31 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
7:17:31 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283392 | lead-out | 1 | 0x41 | 0x00
7:17:31 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:17:31 μμ #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
7:17:31 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:17:31 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 8x (11.080 KB/s)
7:17:31 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:17:31 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
7:17:31 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
7:17:49 μμ #19 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03984000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
7:17:49 μμ #20 SCSI -1064 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x060B0000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0E 0x21 0x02
7:17:49 μμ #21 CDR -1135 File Writer.cpp, Line 311
Write error
HL-DT-ST DVDRAM GSA-H10N\H1 T0
7:17:49 μμ #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:17:50 μμ #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:18:35 μμ #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
7:18:36 μμ #25 SCSI -1135 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
7:18:36 μμ #26 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
7:18:36 μμ #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 8x (11.080 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 113MB (116560kB)
Memory in use : 77 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
11.4.2007
ISO compilation
7:21:12 μμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:21:12 μμ #2 Text 0 File Reader.cpp, Line 127
Reader running
7:21:12 μμ #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
7:21:12 μμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
7:21:12 μμ #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
7:21:12 μμ #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283241 (507:23.16, 4459MB)
7:21:12 μμ #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
7:21:12 μμ #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
7:21:12 μμ #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:21:12 μμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
7:21:12 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283392 | lead-out | 1 | 0x41 | 0x00
7:21:12 μμ #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:21:12 μμ #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
7:21:12 μμ #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:21:12 μμ #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)
7:21:12 μμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:21:12 μμ #17 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
7:21:12 μμ #18 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
7:21:29 μμ #19 SCSI -1135 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x03984000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5C 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x0C 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
7:21:29 μμ #20 SCSI -1064 File Cdrdrv.cpp, Line 1430
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x06070000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x10
0x2A 0x00 0x00 0x0E 0x21 0x02
7:21:29 μμ #21 CDR -1135 File Writer.cpp, Line 311
Write error
HL-DT-ST DVDRAM GSA-H10N\H1 T0
7:21:29 μμ #22 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:21:30 μμ #23 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:22:13 μμ #24 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
7:22:14 μμ #25 SCSI -1135 File Cdrdrv.cpp, Line 1176
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x10
0x35 0x2D 0x03 0x0E 0x0C 0x00
7:22:14 μμ #26 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
7:22:14 μμ #27 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.57 (1008), size=48128 bytes, created 23/12/1997 3:23:24 πμ
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 5:35:34 μμ
Nero version: 6.6.0.3 (Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ATAPI
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
CD-ROM: <HL-DT-ST DVDRAM GSA-H10N >Version: JL10 - HA 1 TA 0 - 6.6.0.3
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : ATAPI DVD-ROM 16XMax atapi Port 0 ID 1 DMA: On
CdRomPeripheral : HL-DT-ST DVDRAM GSA-H10N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
ATAPI DVD-ROM 16XMax D: CDRom0
HL-DT-ST DVDRAM GSA-H10N E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 99MB (102196kB)
Memory in use : 80 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.4.2007
ISO compilation
9:17:46 πμ #1 Text 0 File Isodoc.cpp, Line 6168
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
9:17:46 πμ #2 Text 0 File Reader.cpp, Line 127
Reader running
9:17:46 πμ #3 Text 0 File Writer.cpp, Line 122
Writer HL-DT-ST DVDRAM GSA-H10N running
9:17:46 πμ #4 ISO9660GEN -11 File geniso.cpp, Line 3286
First writeable address = 0 (0x00000000)
9:17:46 πμ #5 Text 0 File Burncd.cpp, Line 3151
Turn on Disc-at-once, using DVD media
9:17:46 πμ #6 Text 0 File DlgWaitCD.cpp, Line 256
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2283241 (507:23.16, 4459MB)
9:17:46 πμ #7 Text 0 File DlgWaitCD.cpp, Line 268
Write in overburning mode: NO (enabled: CD)
9:17:46 πμ #8 Text 0 File DlgWaitCD.cpp, Line 2309
Recorder: HL-DT-ST DVDRAM GSA-H10N, Media type: DVD+R
Disc Manufacturer ID: RICOHJPN, Media Type ID: R03, Product revision number: 4
Disc Application Code: 0, Extended Information Indicators: 7
9:17:46 πμ #9 Text 0 File DlgWaitCD.cpp, Line 430
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:17:46 πμ #10 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2283392 (2283392) = #2283392/507:25.17
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2283392 blocks [HL-DT-ST DVDRAM GSA-H10N]
--------------------------------------------------------------
9:17:46 πμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 1040
Prepare recorder [HL-DT-ST DVDRAM GSA-H10N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 381419520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2283392 | lead-out | 1 | 0x41 | 0x00
9:17:46 πμ #12 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
9:17:46 πμ #13 Text 0 File Burncd.cpp, Line 4038
Cache writing successful.
9:17:46 πμ #14 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
9:17:46 πμ #15 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5.540 KB/s)
9:17:47 πμ #16 Text 0 File ThreadedTransferInterface.cpp, Line 2596
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:17:47 πμ #17 Text 0 File Cdrdrv.cpp, Line 8315
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: RICOHJPN
Media type ID: R03
Product revision number: 4
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 52 49 43 4F 48 - 4A 50 4E 52 30 33 04 38 ...RICOHJPNR03.8
23 54 37 13 00 44 73 00 - 84 6D 15 15 0B 0B 08 08 #T7..Ds..m......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
9:17:47 πμ #18 Text 0 File DVDPlusRW.cpp, Line 608
Start write address at LBA 0
DVD high compatibility mode: Yes
9:32:02 πμ #19 Text 0 File WriterStatus.cpp, Line 116
<HL-DT-ST DVDRAM GSA-H10N > start writing Lead-Out at LBA 2283392 (22D780h), lenght 0 blocks
9:32:02 πμ #20 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
9:32:37 πμ #21 Phase 37 File dlgbrnst.cpp, Line 1832
Burn process completed successfully at 4x (5.540 KB/s)
Existing drivers:
File 'Drivers\ASPI32.SYS': Ver=4.57 (1008), size=23936 bytes, created 23/12/1997 4:02:46 πμ
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 2/11/2002 9:53:04 πμ
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 4/8/2004 8:59:42 πμ (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero-Burning Rom, History File *** ======
This message has been edited since posting. Last time this message was edited on 12. April 2007 @ 01:38
|
AfterDawn Addict
|
12. April 2007 @ 01:28 |
Link to this message
|
You have posted several logs so I will pick one of the failed burns and comment on it.
First up you have your serial numbers appearing at the start of every log, I would suggest you edit them out before someone pirates them
Quote:
Nero API version: 6.6.0.3
Update your Nero, both packages from here
Package 1:
http://www.dvdplusvideo.com/Nero-6.6.0.18_no_yt.exe
Package 2:
http://www.dvdplusvideo.com/NVE-3.1.0.21_no_yt.exe
Quote:
Recorder: <HL-DT-ST DVDRAM GSA-H10N>Version: JL10
Update your firmware to JL12 from here
http://lgodd.lge.com/fwdrv/DVD-WRITER/GSAH10N_JL12.exe
You are using different brands of discs, NONE of them are good quality, try Verbatim or Sony (made in Japan)
Burn your DVDs at 4X and your CDs at 32X
I have also noticed that you have a lot of memory in use when burning....dont multitask while burning.
|
|
Advertisement
|
|
|
|
HauntedPu
Newbie
|
12. April 2007 @ 23:24 |
Link to this message
|
|
Thank you very much gwendolin!!!
I will try everything you said and I will revert.
|
|
