|
|
|
Nerovision problem
|
|
Junior Member
|
12. May 2007 @ 08:50 |
Link to this message
|
I've purchased and used both Nero 6 and Nero 7 but everytime I try to transcode and burn to DVD any kind of video files with Nerovision I get discs that stick and freeze in various parts of the movies.
The funny thing is that I've found out how to repair this isuue, you know how?
By backing up with DVD Shrink all the DVDs I created with Nerovision.
This means that for every DVD I make with Nerovision I need one more to back up with DVD Shrink so that I can get a decent project.
Don't tell me to change media because I've already did with no resaults. Even the best and most expensive media I've used stick and freeze after Nerovision.
Sometimes even DVD Shrink can produce a sticky DVD which means that I have to back it up again to get a satisfactory resault.
You don't know how much money I've spent in blank media, considering that most of my projects fit only to double layers which are quite expensive.
Can anybody help?
Thanks in advance.
|
AfterDawn Addict
|
12. May 2007 @ 09:05 |
Link to this message
|
Consider posting a Nero log from one of these sessions.
|
Junior Member
|
20. May 2007 @ 07:04 |
Link to this message
|
Recently I cannot even copy DVDs with Nero 6. Here's the log.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 2/11/2004 12:54:32 μμ
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <HL-DT-ST DVDRAM GSA-4163B>Version: A105 - HA 1 TA 1 - 6.6.1.15
Adapter driver: <IEEE 1394> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <HL-DT-ST RW/DVD GCC-4240N>Version: C102 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST RW/DVD GCC-4240N D: CDRom0
HL-DT-ST DVDRAM GSA-4163B E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 510MB (523120kB)
Free physical memory: 315MB (322600kB)
Memory in use : 38 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.5.2007
DVD-Copy on the fly
5:41:33 μμ #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:41:33 μμ #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:41:33 μμ #3 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:41:33 μμ #4 Text 0 File DVDCopy.cpp, Line 294
DVD Track-Information from source disc:
Media Type: DVD-ROM
Last LBA on layer 0 = 2042895 / 0x1F2C0F / 3990MB
S01 T01 Con 0x14 Start 0 Len 4044517 (gap 0) Blank 0 Res 0 Dmg 0 Open Trk 0 Mode TRM_DATA_MODE1 (0)
5:41:33 μμ #5 Text 0 File DVDCopy.cpp, Line 407
Max -1 tracks of 1 allowed to copy
1: 0 - 4044517 = 4044517, TRM_DATA_MODE1, block size 2048, read opt 0 (no read options)
5:41:33 μμ #6 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
5:41:33 μμ #7 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 4044516 (898:46.66, 7899MB)
5:41:33 μμ #8 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
5:41:33 μμ #9 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVDRAM GSA-4163B, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
5:41:33 μμ #10 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:41:33 μμ #11 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - Data (mode 1))
2 indices, index0 (150) not provided
original disc pos #0 + 4044517 (4044517) = #4044517/898:46.67
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 4044517 blocks [HL-DT-ST DVDRAM GSA-4163B]
--------------------------------------------------------------
5:41:33 μμ #12 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVDRAM GSA-4163B] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x40; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8283170816, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
4044517 | lead-out | 1 | 0x41 | 0x00
5:41:33 μμ #13 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
5:41:33 μμ #14 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 2.4x (3.324 KB/s)
5:41:34 μμ #15 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
5:42:01 μμ #16 Text 0 File DVDPlusDualLayer.cpp, Line 631
L0 Data Zone Capacity set to 2042896 (1F2C10h, 3990MB) -> OK, confirmed setting
5:42:01 μμ #17 CDR -1205 File DVDPlusDualLayer.cpp, Line 658
Burning Layer 1
5:42:01 μμ #18 Text 0 File DVDPlusDualLayer.cpp, Line 668
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
5:42:01 μμ #19 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 222C0F h (LBN: 1F2C0F h, 3990 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
5:42:01 μμ #20 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
5:43:38 μμ #21 SPTI -1039 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x2A 00 00 02 39 A0 00 00 20 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0B 35 01 00 0E 09 01
Buffer x074b0580: Len x10000
0x00 00 01 BA 44 0F DD F3 74 75 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 DE 08 10 20 81 64 97 A7 51
0xCA B6 7D 51 83 C0 07 B5 2A 9D 9E 37 7B FC EA 94
5:43:38 μμ #22 CDR -1039 File Writer.cpp, Line 281
Focus or tracking error
E: HL-DT-ST DVDRAM GSA-4163B
5:43:38 μμ #23 SPTI -1039 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1039)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x09
Sense Qual: 0x01
CDB Data: 0x00 00 00 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 0B 35 01 00 0E 09 01
5:43:38 μμ #24 Phase 127 File dlgbrnst.cpp, Line 1685
Generating DVD high compatibility borders
5:43:38 μμ #25 CDR -1039 File WriterStatus.cpp, Line 162
Focus or tracking error
E: HL-DT-ST DVDRAM GSA-4163B
5:43:38 μμ #26 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
5:43:39 μμ #27 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 2.4x (3.324 KB/s)
5:43:39 μμ #28 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:44:15 μμ #29 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:44:15 μμ #30 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
5:44:16 μμ #31 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
5:44:21 μμ #32 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
5:44:21 μμ #33 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/8/2001 10:07:32 μμ
File 'Drivers\PXHELP20.SYS': Ver=2.03.18a, size=20576 bytes, created 28/8/2005 8:35:22 μμ (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any suggestions?
|
|
Advertisement
|
|
|
AfterDawn Addict
|
20. May 2007 @ 07:32 |
Link to this message
|
Quote:
=== Scsi-Device-Map ===
DiskPeripheral : IC25N040ATMR04-0 atapi Port 0 ID 0 DMA: Off
CdRomPeripheral : HL-DT-ST RW/DVD GCC-4240N atapi Port 1 ID 0 DMA: On
Looks like the hard drive has DMA off and I don't see where the DVD burner is listed.
If you uninstall the controller and reboot , Windows will redetect it and turn DMA on.
My Computer > properties>hardware>device manager >ide controllers then uninstall the Primary and reboot.
Running the Nero Info Tool, shows the state of the DMA under 'configuration'.
This message has been edited since posting. Last time this message was edited on 20. May 2007 @ 07:33
|
|
