|
|
|
Nero Burn Problems
|
|
|
bmoreno
Newbie
|
1. June 2007 @ 13:31 |
Link to this message
|
Hello. I'm new to this, so please bear with me. I have been running Nero and burning movies from my hard drive to Memorex DVD+R RW for at least 8 months with no problems. Two days ago (5/30), every burn started to fail with the following messages:
Burn process started at 2.4X (3324 KB/s)
Compiling DVD volume started
Writing to disc failed
Burn process failed at 2.4X (3323 KB/s)
This action happened 1 minute into the burn process. I have changed nothing on my machine.
I have checked the DMA to ensure it is setup properly, and it is. Can someone help? Th
|
|
Advertisement
|
|
|
|
Moderator
|
1. June 2007 @ 13:56 |
Link to this message
|
|
Hi bmoreno
Post the rest of the log to help sort this out.
Just be sure to edit out the serial # - should be at the top and begins w/ 1A, 1C or 5C.
Memorex uses different manufacturers - some good some not so good. The log should tell us who the manufacturer is. New pack of discs or the same ones that didn't give you a problem before?
You may just need a firmware update if one is available.
|
|
bmoreno
Newbie
|
1. June 2007 @ 14:57 |
Link to this message
|
|
Thanks. I'm doing another burn right now and will pull the log and delete serials as appropriate.
I'm using the same batch of discs that I have been using for a few weeks. Even went close to the bottom of the disc box in case I had a few bad ones. No difference. Thanks for your help.
|
Moderator
|
1. June 2007 @ 15:53 |
Link to this message
|
|
Ok - even if the log is successful go ahead on post it.
May help stop future failures :)
|
|
bmoreno
Newbie
|
1. June 2007 @ 17:02 |
Link to this message
|
Ok, here's the entire log:
********** Nero Recode 2 **********
Version: 2.2.6.17
Bob M.
Project type: Copy entire DVD
Target size: DVD5 (2282925)
20:24:25 File LangStreamPatcher.cpp, Line 56
Command table patching started...
20:24:25 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 2 patched!
20:24:26 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 3 patched!
20:24:26 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 6 patched!
20:24:26 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 7 patched!
20:24:26 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTS_PGCITI - PGC 1 patched!
20:24:26 File LangStreamPatcher.cpp, Line 101
VTS 4 - VTS_PGCITI - PGC 1 patched!
20:24:26 File LangStreamPatcher.cpp, Line 101
VTS 5 - VTS_PGCITI - PGC 1 patched!
20:24:26 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD+-RW DW-D56A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Bob\My Documents\Nero Recode (63386906624 bytes free)
Direct burning: true
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: true
Compress Adaptive: false
20:24:38 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [7 vobus] 1.52MB -> 1.52MB [R 1.00]
Video: 1.51MB, extra: 0.02MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Menus Vobs [1 vobus] 0.22MB -> 0.22MB [R 1.00]
Video: 0.22MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [1 vobus] 0.01MB -> 0.01MB [not compressable]
Video: 0.01MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 0 streams
VTS_02 Title Vobs [16 vobus] 7.56MB -> 7.56MB [R 1.00]
Video: 7.53MB, extra: 0.03MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 0.00MB [enabled]
Subpicture: 0 streams
VTS_03 Menus Vobs [11 vobus] 2.58MB -> 2.58MB [R 1.00]
Video: 2.39MB, extra: 0.19MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 0.00MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.17MB [enabled]
VTS_03 Title Vobs [11904 vobus] 3950.76MB -> 3654.25MB [R 1.00]
Video: 3480.04MB, extra: 174.21MB
Audio: 3 streams
0. 0. Dolby Digital 2-ch English 146.30MB [enabled]
1. 1. Dolby Digital 2-ch French 145.76MB [disabled]
2. 2. Dolby Digital 2-ch Spanish 146.35MB [disabled]
Subpicture: 4 streams
0. 0. English - Normal Captions 4.66MB [enabled]
1. 1. Spanish 4.36MB [disabled]
2. 2. Spanish 0.02MB [disabled]
3. 3. French 0.02MB [disabled]
VTS_04 Title Vobs [32 vobus] 12.25MB -> 12.25MB [R 1.00]
Video: 11.82MB, extra: 0.43MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.37MB [enabled]
Subpicture: 0 streams
VTS_05 Title Vobs [753 vobus] 238.35MB -> 238.35MB [R 1.00]
Video: 226.40MB, extra: 11.95MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 10.48MB [enabled]
Subpicture: 0 streams
VTS_06 Title Vobs [2 vobus] 0.23MB -> 0.23MB [R 1.00]
Video: 0.22MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 0 streams
20:24:38 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
20:24:39 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R
20:24:39 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2283070 sectors (2295104)
20:24:39 File burn_dvdfiles.cpp, Line 684
Compile DVD: begin deep analysis
20:33:33 File burn_dvdfiles.cpp, Line 754
Compile DVD: analysis changed size 3917.31MB -> 3926.86MB
20:33:33 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 3917.31MB (3917.32MB obtained)
20:33:33 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283070 sectors (2005666 required)
20:33:33 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.12MB (3926.86MB obtained)
20:33:33 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
20:33:33 File vob_record.cpp, Line 643
DirectBurn offset: VIDEO_TS.VOB 16
20:33:33 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 1.52MB -> Expected 1.52MB -> Output 1.52MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 7
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.02MB
Source video size = 1.51MB
Pictures Modified [I 0] [P 0] [B 0]
20:33:33 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 0.22MB -> Expected 0.22MB -> Output 0.22MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.22MB
Pictures Modified [I 0] [P 0] [B 0]
20:33:34 File NeroRecorder.cpp, Line 448
Burn failed (3)
----- Begin NeroAPI error log -----
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.19
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 19d
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: Off
=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047960kB)
Free physical memory: 672MB (688476kB)
Memory in use : 34
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.6.2007
NeroAPI
8:24:39 PM #1 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: -1 ( 0:00.-1, 0MB)
8:24:39 PM #2 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO
8:24:39 PM #3 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
8:24:39 PM #4 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
8:24:39 PM #5 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: PRODISC.
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 50 52 4F 44 49 - 53 43 00 52 30 35 01 38 ...PRODISC.R05.8
23 54 37 0F 02 56 6A 02 - 96 5D 16 16 0B 0B 0A 0A #T7..Vj..]......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
8:24:39 PM #6 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
8:24:39 PM #7 Text 0 File BurnAtOnceRecorder.cpp, Line 1010
Estimated filesystem size: 560
8:24:39 PM #8 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
8:33:33 PM #9 Text 0 File BurnAtOnceRecorder.cpp, Line 1704
Buffering files started
8:33:33 PM #10 Text 0 File BurnAtOnceRecorder.cpp, Line 1415
Buffering VIDEO_TS.VOB
8:33:33 PM #11 Text 0 File BurnAtOnceRecorder.cpp, Line 2580
Finished buffering file VIDEO_TS.VOB of size 1597440 bytes (780 sectors)
8:33:33 PM #12 Text 0 File BurnAtOnceRecorder.cpp, Line 2647
Finished writing file VIDEO_TS.VOB of size 1597440 bytes (780 sectors)
8:33:33 PM #13 Text 0 File BurnAtOnceRecorder.cpp, Line 2660
Buffering files finished successfully
8:33:33 PM #14 SCSI -400 File Cdrdrv.cpp, Line 1183
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x00 0x05 0x60 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
8:33:33 PM #15 Text 0 File BurnAtOnceRecorder.cpp, Line 681
Error reserving fragment (0)
8:33:34 PM #16 Text 0 File BurnAtOnceRecorder.cpp, Line 3657
Disc info:
Partitions: 0
8:33:34 PM #17 Text 0 File BurnAtOnceRecorder.cpp, Line 1877
Error reserving start segment
8:33:34 PM #18 Text 0 File BurnAtOnceRecorder.cpp, Line 3657
Disc info:
Partitions: 0
8:33:34 PM #19 Phase 179 File APIProgress.cpp, Line 276
Writing file to disc failed
8:33:34 PM #20 Text 0 File BurnAtOnceRecorder.cpp, Line 3657
Disc info:
Partitions: 0
8:33:34 PM #21 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
----- End NeroAPI error log -----
20:33:34 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
Moderator
|
1. June 2007 @ 17:21 |
Link to this message
|
Here's a few suggestions:
Direct burning: true
Turn burn at once off. Let Recode save temporarily to the hard drive 1st then it will start the burn.
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: Off
Turn DMA back on - here's a link.
Try taking the burn speed up to 4x or 6x for this drive if you can. 2.4x may be a bit too slow for these discs.
Give that a go and let us know.
|
|
bmoreno
Newbie
|
1. June 2007 @ 18:07 |
Link to this message
|
Well....no luck. I made all the necessary changes except wasn't able to change the burn speed. I thought for a minute you had it nailed. Here's the latest log:
********** Nero Recode 2 **********
Version: 2.2.6.17
Bob M.
Project type: Copy entire DVD
Target size: DVD5 (2282925)
21:45:17 File LangStreamPatcher.cpp, Line 56
Command table patching started...
21:45:17 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 2 patched!
21:45:17 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 3 patched!
21:45:17 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 6 patched!
21:45:17 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTSM_PGCI_UT - LU 1 - PGC 7 patched!
21:45:17 File LangStreamPatcher.cpp, Line 101
VTS 3 - VTS_PGCITI - PGC 1 patched!
21:45:17 File LangStreamPatcher.cpp, Line 101
VTS 4 - VTS_PGCITI - PGC 1 patched!
21:45:17 File LangStreamPatcher.cpp, Line 101
VTS 5 - VTS_PGCITI - PGC 1 patched!
21:45:17 File LangStreamPatcher.cpp, Line 133
All tables successfully patched!
Burn settings:
Target: SONY DVD+-RW DW-D56A
Number of copies: 1
Write speed: 0 KB/s
Temp folder: C:\Documents and Settings\Bob\My Documents\Nero Recode (63383097344 bytes free)
Direct burning: false
Target media: DVD+R/RW, DVD-R/RW, DVD-RAM, DVD-R DL, DVD+R DL
Shutdown when finished: false
Advanced Analysis: true
Compress Adaptive: false
21:45:32 File burn_dvdfiles.cpp, Line 231
Compile DVD: init
VMG Menus Vobs [7 vobus] 1.52MB -> 1.52MB [R 1.00]
Video: 1.51MB, extra: 0.02MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Menus Vobs [1 vobus] 0.22MB -> 0.22MB [R 1.00]
Video: 0.22MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 1 streams
0. 0. Unspecified 0.00MB [enabled]
VTS_01 Title Vobs [1 vobus] 0.01MB -> 0.01MB [not compressable]
Video: 0.01MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 0 streams
VTS_02 Title Vobs [16 vobus] 7.56MB -> 7.56MB [R 1.00]
Video: 7.53MB, extra: 0.03MB
Audio: 1 streams
0. 0. Dolby Digital 5.1-ch English 0.00MB [enabled]
Subpicture: 0 streams
VTS_03 Menus Vobs [11 vobus] 2.58MB -> 2.58MB [R 1.00]
Video: 2.39MB, extra: 0.19MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch Unspecified 0.00MB [enabled]
Subpicture: 1 streams
0. 0. Unspecified 0.17MB [enabled]
VTS_03 Title Vobs [11904 vobus] 3950.76MB -> 3654.25MB [R 1.00]
Video: 3480.04MB, extra: 174.21MB
Audio: 3 streams
0. 0. Dolby Digital 2-ch English 146.30MB [enabled]
1. 1. Dolby Digital 2-ch French 145.76MB [disabled]
2. 2. Dolby Digital 2-ch Spanish 146.35MB [disabled]
Subpicture: 4 streams
0. 0. English - Normal Captions 4.66MB [enabled]
1. 1. Spanish 4.36MB [disabled]
2. 2. Spanish 0.02MB [disabled]
3. 3. French 0.02MB [disabled]
VTS_04 Title Vobs [32 vobus] 12.25MB -> 12.25MB [R 1.00]
Video: 11.82MB, extra: 0.43MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 0.37MB [enabled]
Subpicture: 0 streams
VTS_05 Title Vobs [753 vobus] 238.35MB -> 238.35MB [R 1.00]
Video: 226.40MB, extra: 11.95MB
Audio: 1 streams
0. 0. Dolby Digital 2-ch English 10.48MB [enabled]
Subpicture: 0 streams
VTS_06 Title Vobs [2 vobus] 0.23MB -> 0.23MB [R 1.00]
Video: 0.22MB, extra: 0.00MB
Audio: 0 streams
Subpicture: 0 streams
21:45:33 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
21:45:33 File NeroRecorderBase.cpp, Line 488
Writing to disc: DVD+R
21:45:33 File NeroRecorderBase.cpp, Line 502
Free capacity on disc: 2283070 sectors (2295104)
21:45:33 File burn_dvdfiles.cpp, Line 684
Compile DVD: begin deep analysis
21:54:22 File burn_dvdfiles.cpp, Line 754
Compile DVD: analysis changed size 3917.31MB -> 3926.86MB
21:54:22 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 3917.31MB (3917.32MB obtained)
21:54:22 File burn_dvdfiles.cpp, Line 479
Compile DVD: burning 2283070 sectors (2005666 required)
21:54:22 File burn_dvdfiles.cpp, Line 656
Compile DVD: adjust target size to 4459.12MB (3926.86MB obtained)
21:54:22 File burn_dvdfiles.cpp, Line 524
Compiling DVD Volume started
21:54:22 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VMG Menus Vobs
VMG Menus Vobs:
Original 1.52MB -> Expected 1.52MB -> Output 1.52MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 7
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.02MB
Source video size = 1.51MB
Pictures Modified [I 0] [P 0] [B 0]
21:54:22 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Menus Vobs
VTS_01 Menus Vobs:
Original 0.22MB -> Expected 0.22MB -> Output 0.22MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.22MB
Pictures Modified [I 0] [P 0] [B 0]
21:54:22 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_01 Title Vobs
VTS_01 Title Vobs:
Original 0.01MB -> Expected 0.01MB -> Output 0.01MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 1
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.01MB
Pictures Modified [I 0] [P 0] [B 0]
21:54:23 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_02 Title Vobs
VTS_02 Title Vobs:
Original 7.56MB -> Expected 7.56MB -> Output 7.56MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 16
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.03MB
Source video size = 7.53MB
Pictures Modified [I 0] [P 0] [B 0]
21:54:23 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_03 Menus Vobs
VTS_03 Menus Vobs:
Original 2.58MB -> Expected 2.58MB -> Output 2.58MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 11
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.19MB
Source video size = 2.39MB
Pictures Modified [I 0] [P 0] [B 0]
21:56:08 File NeroRecorder.cpp, Line 593
Added extra file VTS_03_2.VOB
21:57:45 File NeroRecorder.cpp, Line 593
Added extra file VTS_03_3.VOB
21:59:21 File NeroRecorder.cpp, Line 593
Added extra file VTS_03_4.VOB
22:00:07 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_03 Title Vobs
VTS_03 Title Vobs:
Original 3950.76MB -> Expected 3663.79MB -> Output 3663.79MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 11904
Slide encoded = 0
StillImage encoded = 0
Output extra size = 168.34MB
Source video size = 3495.45MB
Pictures Modified [I 0] [P 0] [B 0]
22:00:12 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_04 Title Vobs
VTS_04 Title Vobs:
Original 12.25MB -> Expected 12.25MB -> Output 12.25MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 32
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.44MB
Source video size = 11.81MB
Pictures Modified [I 0] [P 0] [B 0]
22:00:28 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_05 Title Vobs
VTS_05 Title Vobs:
Original 238.35MB -> Expected 238.35MB -> Output 238.35MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 753
Slide encoded = 0
StillImage encoded = 0
Output extra size = 10.98MB
Source video size = 227.37MB
Pictures Modified [I 0] [P 0] [B 0]
22:00:32 File burn_dvdfiles.cpp, Line 1058
Compile DVD: finished VTS_06 Title Vobs
VTS_06 Title Vobs:
Original 0.23MB -> Expected 0.23MB -> Output 0.23MB
Finished error 0.00MB
Ratio encoded = 0
Original encoded = 2
Slide encoded = 0
StillImage encoded = 0
Output extra size = 0.00MB
Source video size = 0.22MB
Pictures Modified [I 0] [P 0] [B 0]
22:00:32 File burn_dvdfiles.cpp, Line 547
Compile DVD: completed successfuly (3926.86MB)
22:00:32 File NeroRecorderBase.cpp, Line 1096
Burning 26 files with total size of 4117606400 bytes on hard disk
22:00:32 File burn_dvdfiles.cpp, Line 1152
Compile DVD: begin copy 1
1A20-820N-0132-2540-5706-0121*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\NeroVision\NeroFiles\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero API version: 6.6.0.19
Using interface version: 6.6.0.9
Installed in: C:\Program Files\Ahead\NeroVision\NeroFiles\
Application: Ahead\Nero Recode
Internal Version: 6, 6, 0, 19d
Recorder: <SONY DVD+-RW DW-D56A> Version: PDS7 - HA 1 TA 0 - 6.6.0.19
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
=== Scsi-Device-Map ===
DiskPeripheral : FUJITSU MHV2100AH atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SONY DVD+-RW DW-D56A atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
SONY DVD+-RW DW-D56A D: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1047960kB)
Free physical memory: 543MB (556536kB)
Memory in use : 46
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
1.6.2007
NeroAPI
10:00:32 PM #1 Phase 112 File APIProgress.cpp, Line 276
DVD-Video files reallocation started
10:00:32 PM #2 Phase 114 File APIProgress.cpp, Line 276
DVD-Video files reallocation completed (no file modified)
10:00:32 PM #3 Phase 111 File APIProgress.cpp, Line 276
DVD-Video files sorted
10:00:32 PM #4 Text 0 File Reader.cpp, Line 127
Reader running
10:00:32 PM #5 Text 0 File Writer.cpp, Line 122
Writer SONY DVD+-RW DW-D56A running
10:00:32 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:00:32 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:00:32 PM #8 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:00:33 PM #9 Text 0 File DlgWaitCD.cpp, Line 272
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2011103 (446:54.53, 3927MB)
10:00:33 PM #10 Text 0 File DlgWaitCD.cpp, Line 284
Write in overburning mode: NO (enabled: CD)
10:00:33 PM #11 Text 0 File DlgWaitCD.cpp, Line 2494
Recorder: SONY DVD+-RW DW-D56A, Media type: DVD+R
Disc Manufacturer ID: PRODISC, Media Type ID: R05, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 7
10:00:33 PM #12 Text 0 File DlgWaitCD.cpp, Line 450
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:00:33 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2011104 (2011104) = #2011104/446:54.54
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2011104 blocks [SONY DVD+-RW DW-D56A]
--------------------------------------------------------------
10:00:33 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [SONY DVD+-RW DW-D56A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4118740992, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2011104 | lead-out | 1 | 0x41 | 0x00
10:00:33 PM #15 Phase 24 File APIProgress.cpp, Line 276
Caching of files started
10:00:33 PM #16 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:00:33 PM #17 Phase 25 File APIProgress.cpp, Line 276
Caching of files completed
10:00:33 PM #18 Phase 36 File APIProgress.cpp, Line 276
Burn process started at 2.4x (3,324 KB/s)
10:00:33 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:00:33 PM #20 Text 0 File Cdrdrv.cpp, Line 8926
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: PRODISC.
Media type ID: R05
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 50 52 4F 44 49 - 53 43 00 52 30 35 01 38 ...PRODISC.R05.8
23 54 37 0F 02 56 6A 02 - 96 5D 16 16 0B 0B 0A 0A #T7..Vj..]......
01 1D 1E 0C 0C 12 12 01 - 00 00 00 00 00 00 00 00 ................
10:00:33 PM #21 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:00:36 PM #22 SCSI -400 File Cdrdrv.cpp, Line 1437
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x02E60000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x27
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x27 0x00
10:00:36 PM #23 CDR -400 File Writer.cpp, Line 311
Unspecified target error
10:00:36 PM #24 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:00:36 PM #25 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:00:36 PM #26 Phase 127 File APIProgress.cpp, Line 276
Generating DVD high compatibility borders
10:00:36 PM #27 Phase 129 File APIProgress.cpp, Line 276
Generating DVD borders completed successfully
10:00:36 PM #28 Phase 38 File APIProgress.cpp, Line 276
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
22:00:36 File NeroRecorderBase.cpp, Line 906
Burn failed (3)
22:00:36 File burn_dvdfiles.cpp, Line 301
Compile DVD: exit
|
|
Advertisement
|
|
|
Moderator
|
1. June 2007 @ 19:14 |
Link to this message
|
Dang - ok try another burning program - have Recode save the files to your hard drive instead of the burner. Use ImgBurn - a good free burner.
Use the build mode to add the video_ts folder.
It's odd that you can't change the burn speed - usually 2.4x is a default speed used when the discs aren't fully recognized by the burner.
From your log all looks ok there.
Anything change pc wise since this problem started?
Next thing would be to try different media - try some Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell.
|
|
