|
Nero 7 Ultra Edition--AVI burn Help
|
|
|
bhavin
Member
|
2. June 2007 @ 11:50 |
Link to this message
|
I am using Nero to try to burn some AVIs onto a DVD. I go to NeroStartSmart->Photo and Video->Convert DVD Movies to Nero Digital. I know how to get the AVI on the disk and play it and watch it; however, the problem is that on my computer, the AVI is only 700 MB, but when I move it onto Nero using the command bolded (which leads me to Nero Digital Titles), it goes up to like 3000 MB. Is there anyway I can keep this at 700 MB?
Also can you update your firmware automatically or do you have to find which one you need?
Thanks.
|
|
Advertisement
|
 |
|
|
Moderator
|
2. June 2007 @ 12:18 |
Link to this message
|
When you convert an AVI file to another format like Nero Digital which is mpeg4 the size expands.
The only way to keep it a 700mb would be to burn it straight like as a data disc. But the player would need to support playing DivX.
To update the firmware check the drive manufacturers site to see if there is a newer one. Some drives like Samsung have an app like 'live update' but most don't so you'll need to check.
|
|
bhavin
Member
|
2. June 2007 @ 12:32 |
Link to this message
|
|
Does a PS2 play it? Also can you convert it to something smaller? So there is almost no possible way to keep it 700 MB since my DVD player will probably not be able to read it?
This message has been edited since posting. Last time this message was edited on 2. June 2007 @ 12:41
|
Moderator
|
2. June 2007 @ 12:48 |
Link to this message
|
I don't think a ps2 can play DivX but could be wrong. I've never tried on mine I just convert them.
To play it on a player you'll need to convert it to a format that it supports. So know why that I know of unless you reduce the bitrate way down but that would affect the quality. Really wouldn't advise that.
Check here and see what formats the player supports - just type in the make and model - link.
|
|
bhavin
Member
|
2. June 2007 @ 13:14 |
Link to this message
|
|
Dang, mine doesnt support it.
When you convert yours you just use 1 disc for a movie?
And are VCDs any good?
This message has been edited since posting. Last time this message was edited on 2. June 2007 @ 13:18
|
Moderator
|
2. June 2007 @ 13:43 |
Link to this message
|
Yeah neither do any of my dvd players. But they are pretty keep and alot now support DivX like models of the Philips.
Yep just burn to 1 dvd. If it's a 2 cd AVI I merge them in Vision or Virtual Dub to make 1 dvd - seamless playback.
I do vcds occasionally if I have a file small enuf. The 700 mb go over by say 200 mb.
|
|
bhavin
Member
|
2. June 2007 @ 14:43 |
Link to this message
|
|
|
Moderator
|
2. June 2007 @ 15:02 |
Link to this message
|
Yep it looks like the one my friend has.
Here's one comment on it a videohelp - link
Odd though that it doesn't list supporting dual layer media.
|
|
bhavin
Member
|
3. June 2007 @ 11:22 |
Link to this message
|
Does DivX also allow the playing of BIN files?
|
Moderator
|
3. June 2007 @ 11:54 |
Link to this message
|
|
You got on that one - don't really know.
I only do them on occasion & when I do I extract them thru isobuster then convert.
|
|
bhavin
Member
|
3. June 2007 @ 12:07 |
Link to this message
|
How do I use Nero to burn a data disc? I cant get it to move on to the Next step, it isnt clickable. I was at the Nero Digital conversion area.
I found create a Data DVD but when I clicked on it there was an error. I clicked Debug but it didnt work. Do I have to update it? If so, will it cost?
This message has been edited since posting. Last time this message was edited on 3. June 2007 @ 12:13
|
Moderator
|
3. June 2007 @ 12:39 |
Link to this message
|
Use Express or burning rom. Pick Data CD or Data DVD - depending on the size. 700mb you can use a cd - over that use a dvd.
Then just add the file(s).
What was the error that you got?
Updates are free - which version of Nero 7 are you running? Are you running Nero Essentials (came w/ a dvd drive or pc) or did you buy Nero?
|
|
bhavin
Member
|
4. June 2007 @ 19:35 |
Link to this message
|
I burned a movie (after converting into MPEG-4) onto a DVD-R and played it on my DVD player and it said DVD_ERRLOG5. Did I make a mistake in the burn, or is it the DVD? I am using Verbatim.
|
Moderator
|
4. June 2007 @ 20:03 |
Link to this message
|
|
Does the player supports mpeg4? If not than that might be the reason for the error.
Check the link above and see ig mpeg4 is listed.
If not then take that mpeg4 and convert it to a dvd compliant file w/ Vision. (does it automatically) Or take the original file and use in Vision.
|
|
bhavin
Member
|
4. June 2007 @ 20:18 |
Link to this message
|
I converted it to Nero Digital, which you said was mpeg4. I tried it once with a Windows Movie file, and when I converted it to Nero Digital and played it on my player, it worked.
I tried it on 2 different DVD players, the Philips one I showed you, which didnt work even though I believe it is listed.
This message has been edited since posting. Last time this message was edited on 4. June 2007 @ 20:21
|
Moderator
|
4. June 2007 @ 20:33 |
Link to this message
|
Yes mpeg4 is the format Nero Digital is in. It opens Recode (from how you picked it above)
Since you've burned this way before - my bad looks like the one player does support mpeg 4.
Playback in the pc?
Take the source file and use Vison this time to do a dvd compliant dvd.
Have the burn speed set to have of the rated speed of the media.
This will take a little longer than recode.
|
|
bhavin
Member
|
4. June 2007 @ 20:39 |
Link to this message
|
I dont have Nero Vision. This Recode thing is taking forever as it is. What is playback? Anyways, I am trying it again with a different movie, if it doesnt work again I dont know what to do.
When I began to burn I used maximum speed, with the other options being 1x and 2x, I think, not 100%.
As for the Data DVD. Tomorrow I will try burning one of those and see if the Philips I got will play it. Do I have to do anything special or can I just use Nero Express to create the Data DVD and it will play it automatically?
Thanks for your help, much appreciated.
|
Moderator
|
5. June 2007 @ 04:15 |
Link to this message
|
Oh for playback I just mean take the disc that doesn't play in the players and try playing it on the pc. That can help narrow down where the problem is.
The other thing I can think of if this is a download - it may be in a different tv format then the one you're in - like NTSC (US, Canada) or PAL (Europe etc). Recode doesn't change the format like Vision would. So that might be another reason for the error.
If thats the case then you could convert it using DivXtoDVD (free).
Set the standard to which one your in (NTSC or PAL). Save to your hard drive then you can burn w/ Express.
You don't have to do anything special. I just pick Data DVD add the files and burn. Set the burn speed to 1/2 of the rated burn speed of the media.
Is your drives firmware up to date?
Burn at half the rated speed of the media - depending on the drive and the rated speed of the media 1x or 2x would be to slow.
edit: fix link for divx
This message has been edited since posting. Last time this message was edited on 5. June 2007 @ 04:17
|
|
bhavin
Member
|
5. June 2007 @ 10:55 |
Link to this message
|
http://img517.imageshack.us/img517/8296/untitledml7.jpg
Those are my speed options all the time. Sometimes there is just Maximum written. Is my burner too slow?
For the Data DVD, it said burn process failed at 2x. However when I did the playback I can play the AVI files on my computer. I then played it on my DVD player and it works! Or atleast I only skimmed through each movie. Explanation?
Also my firmware is 4.20 and it leads me to this site:
http://forum.rpc1.org/dl_result.php?kaj=1&isces=PIONEER+DVR-104
oneer DVR-A04/DVR-104 - 1.20, 1.30, 1.31, 1.32, 1.33, 1.40, 1.41 / 1.30/1.30, 1.40 (Sony) / 4.20 (Sony) Only for drives with 4.xx firmware / 1.30, 1.40
Since I have 4.20, I should upgrade to 1.40 correct?
I still cant figure out the recode one. Thanks a bundle!
This message has been edited since posting. Last time this message was edited on 5. June 2007 @ 11:05
|
Moderator
|
5. June 2007 @ 12:27 |
Link to this message
|
Yeah the burner is too slow and too old. 2x is the max for this drive and it only supports -R media.
I think it's time to invest in a new one - they are so much cheaper now. Plus I thing this one is going to start to fail more. Then finding media that's compatible for it is hard.
A good new drive costs just as much as that Phillips dvd player you picked up. Check newegg for good deals on Liteon's or Pioneers.
The disc probably failed toward the end. I've had that happen and they still played - go figure :)
Looks like you have an oem drive so 4.20 is the firmware for this drive and the latest.
I think part of the problem w/ those discs that aren't playing may be due to the drive itself.
Oh and you're welcome!
|
|
bhavin
Member
|
5. June 2007 @ 12:46 |
Link to this message
|
|
Interesting. Do I have to take out the old one and put in the new one or can I get like an external burner?
And I wont be able to do the recode right?
Thanks again.
|
Moderator
|
5. June 2007 @ 13:16 |
Link to this message
|
Sure you can get an external. Or just take out this drive and replace it with a new one - very easy. And if you have another connection on the ide cable leave the Pioneer in there as a reader and connected the new drive to burn.
How old is the pc (just wondering cause of the age of the pioneer) - do you have 2.0 usb ports? Need those for an external.
No you should be able to do the recode - actually some of the new drives come w/ Nero 7 Essentials so you might get a new Nero with more applications.
|
|
bhavin
Member
|
5. June 2007 @ 13:38 |
Link to this message
|
|
Its that simple? Take in, take out? No problems with the size and the wiring or anything?
The PC is about 2-3 years old, I forget. Yes, I do have 2 USB ports.
How can I do the recode? It isnt working for some reason, I thought it was just the slow burner.
|
Moderator
|
5. June 2007 @ 14:49 |
Link to this message
|
|
Yes it really is that easy.
Just power off the pc - open the case - unscrew the drive from the frame you are taking out (if you are taking 1 out)- unplug from power connector and ide connection.
Set the jumper pin on the back of the new drive to match which ide connection it's on - master or slave.
Now put new drive in place and hook up to power and ide connections.
Screw in and put the case back on.
Power up - windows will detect it as new hardware and do it's little install thing. Viola done!
What's happening with Recode?
edit - typos think I got them all :)
This message has been edited since posting. Last time this message was edited on 5. June 2007 @ 14:50
|
|
Advertisement
|
|
|
|
bhavin
Member
|
5. June 2007 @ 15:07 |
Link to this message
|
|
It just doesnt work. It wont load on the DVD players even though the computer reads it.
|
