|
|
|
nero buffer too large *error*
|
|
|
guzano
Newbie
|
8. June 2007 @ 12:14 |
Link to this message
|
ok so i had this problem once, but i can't remember what i did to fix it.
Here's my Nero log.
(BTW i'm from CHILE so the log is in spanish :/)
Gustavo Mejias
Worms, Inc.
1C82-**serial number removed by creaky**
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
Recorder: <HL-DT-ST DVDRAM GSA-H10A>Version: JL02 - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SN3306M ETF650W >Version: 1.0 - HA 1 TA 2 - 7.9.6.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SAMSUNG SP0822N WA10 nvidesm Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 2B020H1 WAH2 nvidesm Port 0 ID 1 DMA: Off
DiskPeripheral : WDC WD400BB-00JHA0 05.0 nvidesm Port 1 ID 0 DMA: Off
CdRomPeripheral : HL-DT-STDVDRAM GSA-H10A JL02 nvidesm Port 1 ID 1 DMA: Off
CdRomPeripheral : SCSIVAX DVD/CD-ROM 2.7a Vax347s Port 2 ID 0 DMA: Off
CdRomPeripheral : SN3306M ETF650W 1.0 dtscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
SN3306M ETF650W J: CdRom2
HL-DT-ST DVDRAM GSA-H10A M: CdRom0
SCSIVAX DVD/CD-ROM N: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 511MB (523760kB)
Free physical memory: 164MB (168292kB)
Memory in use : 67 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
8.6.2007
Compilación UDF
15:42:46 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
15:42:47 #2 Text 0 File Isodoc.cpp, Line 6663
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
15:42:47 #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
15:42:47 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1597791 (355:03.66, 3120MB)
15:42:47 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
15:42:47 #6 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: HL-DT-ST DVDRAM GSA-H10A, Media type: DVD-R
Disc Manufacturer: SKC Co - .,Ltd.
Disc Application Code: 64, Disc Physical Code: 193
15:42:47 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
15:42:47 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1597792 (1597792) = #1597792/355:3.67
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1597792 blocks [M: HL-DT-ST DVDRAM GSA-H10A]
--------------------------------------------------------------
15:42:47 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [M: HL-DT-ST DVDRAM GSA-H10A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3272278016, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1597792 | 0 | 0x00
1597792 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
15:42:48 #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
15:42:48 #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
15:42:48 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
15:42:48 #13 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
15:42:48 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
15:42:48 #15 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5.540 KB/s)
15:42:48 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
15:42:48 #17 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
15:42:48 #18 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
15:42:48 #19 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
15:42:48 #20 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
15:42:49 #21 SPTI -31 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x09bf0040: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
15:42:49 #22 SPTI -31 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 20 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x08264b40: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
15:42:49 #23 Text 0 File MMC.cpp, Line 20100
Writer-Buffer for M: HL-DT-ST DVDRAM GSA-H10A reduced to 32768Bytes
15:42:49 #24 SPTI -31 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x00) WinError(87) NeroError(-31)
Sense Key: 0x00 (KEY_NO_SENSE)
Sense Code: 0x00
Sense Qual: 0x00
CDB Data: 0x2A 00 00 00 00 00 00 00 10 00 00 00
Sense Area: 0x00 00 00 00 00 00 00 00 00 00 00 00 00
Buffer x08248300: Len x8000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
15:42:49 #25 CDR -31 File Writer.cpp, Line 303
Buffer too large
M: HL-DT-ST DVDRAM GSA-H10A
15:42:52 #26 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was -1 (FFFFFFFFh)
15:42:52 #27 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5.540 KB/s)
15:42:52 #28 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
15:42:57 #29 SPTI -1079 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1079)
Sense Key: 0x04 (KEY_HARDWARE_ERROR)
Sense Code: 0x53
Sense Qual: 0x00
CDB Data: 0x1B 00 00 00 02 00 00 00 00 00 00 00
Sense Area: 0x70 00 04 00 00 00 00 10 02 00 03 0C 53
15:42:59 #30 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
15:42:59 #31 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
This message has been edited since posting. Last time this message was edited on 9. June 2007 @ 02:17
|
|
Advertisement
|
 |
|
|
|
guzano
Newbie
|
8. June 2007 @ 12:19 |
Link to this message
|
i tried to set my DMA on, but i don't have the "Advanced Settings" tab.
My motherboard is a Chaintech APOGEE 7NJL1. http://www.motherboard.cz/mb/chaintech/7NJL1.htm
512 DDR ram
HDD1 Samsung SP0822N 80GB
HDD2 Maxtor 2B020H1 20GB
HDD3 WD WD400BB-00JHA0 40GB
DVD HL-DT-STDVDRAM GSA-H10A (which is borrowed from a friend)
This message has been edited since posting. Last time this message was edited on 8. June 2007 @ 12:21
|
|
aabbccdd
Suspended permanently
|
8. June 2007 @ 23:18 |
Link to this message
|
|
|
Moderator
|
9. June 2007 @ 02:21 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
|
guzano
Newbie
|
10. June 2007 @ 15:15 |
Link to this message
|
|
thx i'll chek'em out.
post ASAP if i had or not, any results.
|
|
Advertisement
|
|
|
|
guzano
Newbie
|
10. June 2007 @ 18:29 |
Link to this message
|
ok, here's the dilema.
I doesn't seem to have the "Advanced Settings" tab under the IDE/ATA channel. Though i uninstalled the driver, the pc hung and i have to restart, BUT windows won't open since it has no CHANNELS to detect anything at all.
Separetely, i can't uninstall Primary or Secondary IDE channel or the DVD-R.
I've checked almost 4 times.
I've read thru your guide and the post you have left me, but so far... nothing has happened.
grts gUZ!
|
|
