|
|
|
SAMSUNG DVD-ROM SD-616E [CD-ROM drive] --Burning problem, please help
|
|
|
jdog23
Newbie
|
26. June 2007 @ 16:30 |
Link to this message
|
Have recently run into a problem I never had before. Nero 7 was too bloated so went back to 6. Used clean tool etc. Firmware updated. Cleared NVRAM. _NEC DVD+RW ND-2100AD [CD-ROM drive]
SAMSUNG DVD-ROM SD-616E [CD-ROM drive] are the two drives. One read only, the other read & write. Run in DMA at slowest speed I can. Burns about 4 minutes, then bam. Error messages and dvd eject. Here is the latest log. Please, if you see what's causing this, please let me know. By the way, I switched media too thinking that may be the issue. Nope, no change. Thanx in advance for the help.
jdog23
User
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 6/26/2007 5:15:14 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <_NEC DVD+RW ND-2100AD> Version: 106F - HA 1 TA 1 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616E D: CDRom0
_NEC DVD+RW ND-2100AD E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 108MB (111220kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2007
UDF/ISO compilation
6:01:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:01:09 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
6:01:09 PM #3 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
6:01:09 PM #4 Text 0 File Isodoc.cpp, Line 6494
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:01:09 PM #5 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
6:01:10 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:01:10 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:01:10 PM #8 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
6:01:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2002799 (445:03.74, 3911MB)
6:01:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:01:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R
6:01:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:01:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2002800 (2002800) = #2002800/445:4.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2002800 blocks [_NEC DVD+RW ND-2100AD]
--------------------------------------------------------------
6:01:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4101734400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2002800 | lead-out | 1 | 0x41 | 0x00
6:01:10 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:01:10 PM #16 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
6:01:10 PM #17 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
6:01:10 PM #18 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
6:01:10 PM #19 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
6:01:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:01:10 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x07b10200: Len x804
6:01:10 PM #22 SPTI -1065 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x032c50c0: Len x6
6:01:10 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:04:14 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 06 E6 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x09696ac0: Len x10000
0x00 00 01 BA 44 74 15 32 9C 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 25 64 38 6A D8 57 15 A1 A3
0x10 59 C6 71 81 20 38 2B 33 1E CE 9C 8C E3 7E 6D
6:04:14 PM #25 CDR -1135 File Writer.cpp, Line 281
Write error
E: _NEC DVD+RW ND-2100AD
6:04:15 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
6:04:15 PM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
6:04:15 PM #28 SPTI -1065 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x032c50c0: Len x6
6:04:15 PM #29 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
E: _NEC DVD+RW ND-2100AD
6:04:15 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
6:04:15 PM #31 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
6:04:16 PM #32 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:04:20 PM #33 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
6:04:20 PM #34 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 3/3/2004 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
User
1A22-0206-0530-1610-5715-1441*
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 6/26/2007 5:15:14 PM
NT-SPTI used
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
(Nero Express)
Recorder: <_NEC DVD+RW ND-2100AD> Version: 106F - HA 1 TA 1 - 6.6.1.15
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 1 TA 0 - 6.6.1.15
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616E D: CDRom0
_NEC DVD+RW ND-2100AD E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 108MB (111220kB)
Memory in use : 57 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
26.6.2007
UDF/ISO compilation
6:01:09 PM #1 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:01:09 PM #2 Phase 112 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation started
6:01:09 PM #3 Phase 114 File dlgbrnst.cpp, Line 1685
DVD-Video files reallocation completed (no file modified)
6:01:09 PM #4 Text 0 File Isodoc.cpp, Line 6494
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
6:01:09 PM #5 Phase 111 File dlgbrnst.cpp, Line 1685
DVD-Video files sorted
6:01:10 PM #6 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:01:10 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:01:10 PM #8 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
6:01:10 PM #9 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2002799 (445:03.74, 3911MB)
6:01:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:01:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R
6:01:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:01:10 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2002800 (2002800) = #2002800/445:4.0
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2002800 blocks [_NEC DVD+RW ND-2100AD]
--------------------------------------------------------------
6:01:10 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4101734400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2002800 | lead-out | 1 | 0x41 | 0x00
6:01:10 PM #15 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:01:10 PM #16 Phase 24 File dlgbrnst.cpp, Line 1685
Caching of files started
6:01:10 PM #17 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
6:01:10 PM #18 Phase 25 File dlgbrnst.cpp, Line 1685
Caching of files completed
6:01:10 PM #19 Phase 36 File dlgbrnst.cpp, Line 1685
Burn process started at 4x (5,540 KB/s)
6:01:10 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:01:10 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 00 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x07b10200: Len x804
6:01:10 PM #22 SPTI -1065 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x032c50c0: Len x6
6:01:10 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:04:14 PM #24 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 00 00 06 E6 80 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
Buffer x09696ac0: Len x10000
0x00 00 01 BA 44 74 15 32 9C 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 25 64 38 6A D8 57 15 A1 A3
0x10 59 C6 71 81 20 38 2B 33 1E CE 9C 8C E3 7E 6D
6:04:14 PM #25 CDR -1135 File Writer.cpp, Line 281
Write error
E: _NEC DVD+RW ND-2100AD
6:04:15 PM #26 SPTI -1135 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
6:04:15 PM #27 SPTI -1176 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1176)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 01 06 00 00 00 00 00 00 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 72 03
6:04:15 PM #28 SPTI -1065 File SCSIPassThrough.cpp, Line 178
CdRom1: SCSIStatus(x02) WinError(0) NeroError(-1065)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 10 00 00 00 00 00 00 06 00 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 20
Buffer x032c50c0: Len x6
6:04:15 PM #29 CDR -1176 File WriterStatus.cpp, Line 162
Session fixation error
E: _NEC DVD+RW ND-2100AD
6:04:15 PM #30 TRANSFER -24 File WriterStatus.cpp, Line 162
Could not perform end of Disc-at-once
6:04:15 PM #31 Phase 38 File dlgbrnst.cpp, Line 1685
Burn process failed at 4x (5,540 KB/s)
6:04:16 PM #32 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:04:20 PM #33 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
6:04:20 PM #34 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 3/3/2004 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\InCDfs.SYS': Ver=4, 3, 23, 2, size=102016 bytes, created 3/23/2006 5:15:58 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDpass.SYS': Ver=4, 3, 23, 2, size=29440 bytes, created 3/23/2006 5:15:56 PM (InCD4 driver for win NT/2K/XP)
File 'Drivers\InCDrec.SYS': Ver=4, 3, 23, 2, size=8704 bytes, created 3/23/2006 5:00:28 PM (InCD4 driver for win NT/2K/XP)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
27. June 2007 @ 06:07 |
Link to this message
|
Quote:
Nero Version: 6.6.1.15
Internal Version: 6, 6, 1, 15
I heard that this version is ok..... I use 6.6.0.18 which I know is perfect without any bugs to it!
Before udating to 6.6.0.18 I would save the serial #, uninstall Nero, then use the cleaning tools : http://ww2.nero.com/nero6/eng/Clean_Tools.html
then do a registry clean up(free registry cleaner, CClean: http://www.ccleaner.com/download/downloadpage.aspx?1) and defrag...... then reboot!
install package one:
http://www.filehippo.com/download_nero_burning_rom/?539
then install package two:
http://www.nero.com/nero6/eng/Patch_for_NVE3.html
reboot and you're good to go!
Quote:
Physical memory : 253MB (260080kB)
Free physical memory: 108MB (111220kB)
Memory in use : 57 %
try closing more programs that are running in the background, using up memory.
Quote:
File 'Drivers\InCDfs.SYS':
File 'Drivers\InCDpass.SYS':
File 'Drivers\InCDrec.SYS':
Packet writing utilities such as "InCD" are notorious for interfering with burn processes, as the way it works is to continually poll the burner to check for new media.
This prevents the burn application gaining exclusive access to the burner, and sense code errors will happen - every time.
Get rid of all packet writing utilities.
They are more trouble than they are worth.
|
|
jdog23
Newbie
|
27. June 2007 @ 16:41 |
Link to this message
|
|
IHoe,
Thanx for the comeback. Excuse my newbieness but "writing packets"?
What is that and how do I get rid of it? Is the the INcd stuff? If so, it's already history.
jdog23
|
AfterDawn Addict
|
27. June 2007 @ 16:43 |
Link to this message
|
|
yes..... uninstall InCD! you should be able to get better results then.
|
|
jdog23
Newbie
|
27. June 2007 @ 18:29 |
Link to this message
|
IHoe,
Did as you suggested. No luck. Got the usual burn failure message after about 4 minutes. I'll send the new log for you to check out. Also, what about recode? That was not in the two downloads you mentioned. Is there a way to try a different program without charge to see if it is Nero or my burner. Or put another way, is there a way to check the burner itself? I feel like I'm going in circles on this one. Please advise.........
jdog23
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
(Nero Express)
Recorder: <_NEC DVD+RW ND-2100AD> Version: 106F - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <SAMSUNG DVD-ROM SD-616E >Version: F501 - HA 1 TA 0 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : SAMSUNG DVD-ROM SD-616E atapi Port 1 ID 0 DMA: On
CdRomPeripheral : _NEC DVD+RW ND-2100AD atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
SAMSUNG DVD-ROM SD-616E D: CDRom0
_NEC DVD+RW ND-2100AD E: CDRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 40894464 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 253MB (260080kB)
Free physical memory: 33MB (34324kB)
Memory in use : 86 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
27.6.2007
UDF/ISO compilation
10:13:28 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
10:13:28 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
10:13:29 PM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
10:13:29 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
10:13:29 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
10:13:29 PM #6 Text 0 File Writer.cpp, Line 122
Writer _NEC DVD+RW ND-2100AD running
10:13:29 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:13:29 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:13:29 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:13:29 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2002799 (445:03.74, 3911MB)
10:13:29 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:13:29 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: _NEC DVD+RW ND-2100AD, Media type: DVD+R
10:13:29 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:13:29 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2002800 (2002800) = #2002800/445:4.0
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2002800 blocks [_NEC DVD+RW ND-2100AD]
--------------------------------------------------------------
10:13:29 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [_NEC DVD+RW ND-2100AD] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4101734400, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2002800 | lead-out | 1 | 0x41 | 0x00
10:13:29 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
10:13:29 PM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:13:29 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
10:13:29 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 4x (5,540 KB/s)
10:13:29 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:13:29 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09910600
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
10:13:29 PM #22 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B95400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
10:13:29 PM #23 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
10:16:34 PM #24 SCSI -1135 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x09250000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x2A 0x00 0x00 0x06 0xE6 0x40 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
10:16:34 PM #25 CDR -1135 File Writer.cpp, Line 311
Write error
10:16:34 PM #26 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
10:16:34 PM #27 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
10:16:34 PM #28 SCSI -1135 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 0x01 0x01 0x00 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x0C 0x00
10:16:34 PM #29 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
10:16:34 PM #30 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
10:16:35 PM #31 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
10:16:35 PM #32 SCSI -1065 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 1, LUN 0, buffer 0x03B95400
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x20
Sense Qual: 0x00
CDB Data: 0xFA 0x10 0x00 0x00 0x00 0x00 0x00 0x00 0x06 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x20 0x00
10:16:35 PM #33 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 4x (5,540 KB/s)
Existing drivers:
File 'Drivers\PXHELP20.SYS': Ver=2.02.70a, size=20176 bytes, created 3/3/2004 2:02:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/3/2004 10:59:44 PM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
AfterDawn Addict
|
28. June 2007 @ 03:02 |
Link to this message
|
what are you trying to do? are you trying to copy a store bought DVD directly? explain exactly what you are trying to do?
Quote:
Physical memory : 253MB (260080kB)
Free physical memory: 33MB (34324kB)
Memory in use : 86 %
you are still using wayyyyyyyyy too much memory! shut down all unnecessary programs running in the back ground! if you don't free up some memory it will hinder the writing process!
Since you are getting Write errors what media are you using. I suggest you use Taiyo Yuden disks or Verbatim! Either made in Japan disks or Verbatim! then try it again!
here is my 6.6.0.18 downloaded the same way you did form the same files...... you should have Nero Recode as shown..... if you don't then it's your serial # that is stopping the full download of the program!
|
AfterDawn Addict
|
28. June 2007 @ 03:03 |
Link to this message
|
what are you trying to do? are you trying to copy a store bought DVD directly? explain exactly what you are trying to do?
Quote:
Physical memory : 253MB (260080kB)
Free physical memory: 33MB (34324kB)
Memory in use : 86 %
you are still using wayyyyyyyyy too much memory! shut down all unnecessary programs running in the back ground! if you don't free up some memory it will hinder the writing process!
Since you are getting Write errors what media are you using. I suggest you use Taiyo Yuden disks or Verbatim! Either made in Japan disks or Verbatim! then try it again!
here is my 6.6.0.18 downloaded the same way you did form the same files...... you should have Nero Recode as shown..... if you don't then it's your serial # that is stopping the full download of the program!
|
|
jdog23
Newbie
|
28. June 2007 @ 03:43 |
Link to this message
|
Ihoe,
This last log was an attempt to simply copy a non-encrypted dvd to another. I was trying to test if it had anything to do with the recoding aspect. I have used readily available programs such as DVD Shrink, any dvd, dvd 4.3 free and DVD Decrypter many times with success. Media type is verbatim and tdk or memorex +R. Versions I was using, 6.6.1.15. Digital, 3.1.0.25 and Media player 1.4.0.35.
What about a different burning program that is reasonably priced? Is there a way to test the burner itself? If I knew for sure if it was a software issue vs. hardware it would be easier to deal with.
Your screenshot is the way mine looked with the above mentioned versions. I appreciate your guidance and expertise.
jdog23
|
AfterDawn Addict
|
28. June 2007 @ 04:06 |
Link to this message
|
|
I am by no means an expert but after 3000+ burns I'm experienced. And stick with the Verbatims and get rid of the Memosux and TDKs..... those are like sub par disks, crappy media! And free up some memory!
|
|
JoeRyan
Senior Member
|
28. June 2007 @ 05:36 |
Link to this message
|
Neither Memorex nor TDK is "sub par" or "crappy" in any technical way. Some people who have had compatibility problems with discs and drives will blame the discs. Compatibility issues are not quality issues. People are having problems with Taiyo Yuden DVD+R 16X media, not because TY has quality problems but because TY is late to market with 16X and their media have less support. The same thing will happen when/if TY introduces DL media.
If experience in recordings is significant, I have almost 30 times more experience than 3,000+ DVD discs.
|
AfterDawn Addict
|
28. June 2007 @ 08:19 |
Link to this message
|
thank you Joe for the clarifications.... I know you're way specific... please excuse my fumbling around ..... so I meant to say that TDK and Memosux are not very compatible to many burners! I hope that may be to your liking.
Quote:
If experience in recordings is significant, I have almost 30 times more experience than 3,000+ DVD discs.
that's why I said, "I am by no means an expert but after 3000+ burns I'm experienced." I never said I was the MOST experienced.
|
AfterDawn Addict
|
28. June 2007 @ 08:19 |
Link to this message
|
JoeRyan,
I just have to ask this question seeing how I see you posting all over the forums about media. Do you work for Memorex or something? You are in the minority big time when it comes to this discussion of media issues just do a Google all over the internet and read a few of the sights devoted to just such areas as DVD media. My guess is you either work for Memorex or are just too stubborn to admit they may be inferior disks because you have used them with great success. It doesn't really matter how many movies you have backed up be it 1 or 30,000 common since and logic would tell any normal person that Memorex are not the best form of media out there. Now that being said I have had great success with Memorex also, but would I recommend them to anyone? Of course not in fact I have used just about every media out there and have done extensive testing on them all and Memorex disks just don't measure up and a lot of people?s problems have been fixed by switching to different media types. You always state that the media is not the problem, but the problem is compatibility with hardware. Well if that?s the case then Memorex is just not compatible with a lot of hardware out there and other brands are so to a common sense thinking person that would mean Memorex is not as good as other brands. Your only contribution here at AD from what I have seen is always contradicting someone else?s advice when it comes to media issues. So which is it, do you work for Memorex or are you just stubborn?
@jdog23,
A "Session fixation error" is almost always a media issue. So either try a different media (brand) and or update your firmware, but you already have the most up to date firmware for your drive so the best option I would suggest is to give another brand of disk a shot. There is one way to test this theory, try just burning the image to your hard drive and see if that works. If it does then try burning the disk with another program like ImgBurn (free). This may eliminate weather it is a software, hardware, or media issue. Another problem that this could possibly be is if you have a motherboard with the Nforce chipset, and you are using the Nvidia SW nForce IDE drivers, I would uninstall them. Go to add/remove programs, select Nvidia Drivers, select the IDE drivers only and remove them. In fact You should try that last option first if it is the case.
Something else I just noticed while re-reading your log Quote:
Media type: DVD+R
This means your drive is not recognizing your media because it should be listing the Media Identification Code there instead of DVD+R.
My Guides--------->http://webpages.charter.net/bacitup/
Newbies------------>http://forums.afterdawn.com/thread_view.cfm/183136
Software ------->http://webpages.charter.net/bacitup/software.htm |
|
jdog23
Newbie
|
28. June 2007 @ 10:19 |
Link to this message
|
|
Wow,
Just when I thought I was going to finally give up and not burn anything anymore you guys got me fired up!! You've given us some more things to try. Will report back.
Many thanx.
jdog23
|
|
JoeRyan
Senior Member
|
28. June 2007 @ 14:15 |
Link to this message
|
Ihoe,
I've seen your advice to many users concerning drives and software, and I'd say you are an "expert" and very knowledgeable and helpful. It would be more correct to say that TDK and Memorex are less compatible and that Verbatim and Taiyo Yuden are the most compatible brands for users rather than attribute incompatibility to poor quality. It is not possible to judge the recording quality of an incompatible disc except with very expensive equipment no consumer can afford.
bbmayo,
I am very stubborn and methodical. You mention logic. That means that before drawing a conclusion every other explanation must be ruled out. When a poster has a problem but does not mention his drive or firmware but does mention the MID code of a disc, the compatibility issue cannot be ruled out. Calling the discs he or she uses "crappy" or poor quality is illogical. This is a perfect example. You yourself saw that the drive did not recognize the disc. The problem was incompatibility, and using 16X Verbatim or Taiyo Yuden may not solve the problem at all either. Would that make them poor quality, too? 8X media might work. The NEC ND-2100 is an older drive that predates dual format drives, and that is the major difficulty for jdog23. His best chance these days is finding 4X DVD+RW media at retail or search for 8X DVD+R media because retail stores have moved to 16X almost entirely.
I have never recommended any brand at all. I have defended CMC, HP, Fuji, Imation, Maxell, Memorex, Philips, Ritek, Prodisc, TDK, and Sony from what appeared to me to be illogical accusations when there was not enough evidence to draw any conclusions about quality. In at least five cases the problem with a particular disc was definitely lack of firmware support because the poster mentioned a drive model and a firmware version that was known to be incompatible. I have even defended Taiyo Yuden 16X DVD+R media from being evidence that the factory had slipped.
This stubbornness comes from years when I was actually in the media business manufacturing magnetic tape. There was a widely believed story that chromium dioxide pigment wore audio or video heads prematurely. Everyone "knew" this, but almost no one could explain the JVC spec, the strata in ferrite heads, the integrity of the read/write gaps, or any of the scientific data and actual experience (A video head that lasts 7,000 hours on virgin chrome tape cannot wear faster than a head that has to be burnished three times to squeeze 6,500 hours out of it because it saw only virgin ferric-cobalt tape!) that disproved this rumor.
I don't care whose discs are recommended. I don't care who uses what discs as long at the users are satisfied. But I do stubbornly object to name calling when there is no real evidence (anecdotal reports still require details to be relevant) to support the conclusion drawn. This particular case is a perfect example of what I have been preaching (...and I apologize to everyone for sounding "preachy.") I'm glad you took the time to dig into the details and find the clue to the problem.
|
|
jdog23
Newbie
|
28. June 2007 @ 14:59 |
Link to this message
|
|
To all who are helping: I can sucessfully recode a dvd to the hard drive. That's how I have always had to do it anyway. It's getting it to the d--- dvd that's got me flustered. And btw, both of the dvd spindles I have are 16X. Am I correct in hearing you that if I can find 8X that may be the answer? If it is, where do you find them? I just always looked for +R's and a reputable name, or so I thought. Just for grins, I went to my collection and gess whattt?
THEY'RE 8X!!!! I will report back to you all as soon as I can get some and try it. My best to all that are trying to help.
jog23
|
AfterDawn Addict
|
28. June 2007 @ 16:20 |
Link to this message
|
|
|
|
Advertisement
|
|
|
|
jdog23
Newbie
|
4. October 2007 @ 14:27 |
Link to this message
|
Thanx to all that helped. Sorry it took so long to get a resolution but as it turns out it was the burner that was bad. I tried a used burner from a coworker and it worked. Went and bought a new burner, (Sony DRU-840A)not big bucks but works like a charm!
Thank you again!
jdog23
|
|
