|
|
|
Nero 7 Premium burns but DVD won't read
|
|
|
lswetland
Newbie
|
28. June 2007 @ 11:37 |
Link to this message
|
Hi. I hope someone can help. I have been able to successfully burn security copies of my DVDs using DVD Shrink and Nero for about a year or so. But not anymore :-( I have the Cyberhome DX162D burner on a Dell Dimension 3000. Now, using either Nero 7 Premium or CD Burner XP Pro 3 Freeware - the DVD obviously burns but the DVD player doesn't recognize anything - and - when I use the DVD drive on the PC - I get a pop up that the disc is unrecognizable so can't even look at the contents on it. Generally I use Fujifilm DVD-R media. I have attached a discinfo summary - I am ready to throw the entire PC off of the balcony, so if you can help, you might be able to spare its pathetic life. Thanks, nebraskaboy
DISCINFO VERSION : 1.6.1.6
VENDOR : HL-DT-ST
MODEL : CD-RW GCE-8483B
REVISION : B105
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 255
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : NO
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : NO
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : NO
CAN READ DVD-R : NO
CAN READ DVD-RW : NO
CAN READ DVD-RAM : NO
CAN READ DVD+R : NO
CAN READ DVD+RW : NO
CAN WRITE DVD-R : NO
CAN WRITE DVD-RW : NO
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : NO
CAN WRITE DVD+RW : NO
MAX CDR READ SPEED : 48
MAX CDR WRITE SPEED: 48
DISCINFO VERSION : 1.6.1.6
VENDOR : DVDR/RW
MODEL : DX162D-A
REVISION : 140F
VENDOR SPECIFIC : 124<
LOADING MECHANISM : Tray
NUMBER VOL. LEVELS : 2
BUFFER SIZE : 2048KB
INTERFACE : ATAPI
RPC2 SCHEME : YES
STATUS : Set
USER CHANGES : 4
VENDOR CHANGES : 4
CURRENT REGION : 1
ANALOG AUDIO PLAY : YES
COMPOSITE OUTPUT : NO
DIGITAL PORT-PORT1 : YES
DIGITAL PORT-PORT2 : NO
READ UPC CODE : YES
MULTISESSION READ : YES
MODE 2 FORM 1 : YES
MODE 2 FORM 2 : YES
READ ISRC CODE : YES
READ BAD CODE : NO
BUFFER UNDER-RUN : YES
MT. RAINIER : NO
CAN READ CDR : YES
CAN READ CDRW : YES
CAN READ CDRM2 : YES
CAN WRITE CDR : YES
CAN WRITE CDRW : YES
CAN TEST WRITE : YES
CAN READ DVD-ROM : YES
CAN READ DVD-R : YES
CAN READ DVD-RW : YES
CAN READ DVD-RAM : NO
CAN READ DVD+R : YES
CAN READ DVD+RW : YES
CAN WRITE DVD-R : YES
CAN WRITE DVD-RW : YES
CAN WRITE DVD-RAM : NO
CAN WRITE DVD+R : YES
CAN WRITE DVD+RW : YES
MAX CDR READ SPEED : 40
MAX CDR WRITE SPEED: 40
|
|
Advertisement
|
|
|
|
AfterDawn Addict
|
28. June 2007 @ 13:46 |
Link to this message
|
|
|
|
lswetland
Newbie
|
3. July 2007 @ 07:50 |
Link to this message
|
Dear Attar,
Thank you for being willing to try and help. I have pasted in what I think is the log. I have found that neither the DVD Shrink/Nero 7 combination and the DVD Decrypter/DVD Clone 2 - result in a burned DVD that works in either the PC or my DVD player. Interestingly, when I finish the Nero burn and then put the disc back in the drive on the PC, I look at MY COMPUTER, and is says that drive is a CD drive; when I eject the disc, the drive shows again as a DVD drive?
But here is the log and thanks for anything you can do to offer my PC a stay of execution (meaning, a launch off the balcony...) Luke
====== *** Nero Burning ROM, History File *** ======
1C82-0000-19E5-MAAX-4009-1375-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.9.6.0
Internal Version: 7, 9, 6, 0
Recorder: <DVDR/RW DX162D-A> Version: 140F - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <DVDR/RW DX162D-A >Version: 140F - HA 1 TA 0 - 7.9.6.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : Maxtor 6Y080L0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDR/RW DX162D-A atapi Port 1 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST CD-RW GCE-8483B atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDR/RW DX162D-A D: CdRom0
HL-DT-ST CD-RW GCE-8483B E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 74448896 (0) Byte
BUFE : 0
Physical memory : 509MB (522224kB)
Free physical memory: 214MB (219516kB)
Memory in use : 57
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
2.7.2007
UDF/ISO compilation
5:55:24 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
5:55:24 PM #2 Phase 112 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation started
5:55:24 PM #3 Phase 114 File dlgbrnst.cpp, Line 1762
DVD-Video files reallocation completed (no file modified)
5:55:25 PM #4 Text 0 File Isodoc.cpp, Line 6663
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
5:55:25 PM #5 Phase 111 File dlgbrnst.cpp, Line 1762
DVD-Video files sorted
5:55:25 PM #6 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:55:25 PM #7 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
5:55:25 PM #8 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
5:55:25 PM #9 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1482543 (329:27.18, 2895MB)
5:55:25 PM #10 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
5:55:25 PM #11 Text 0 File DlgWaitCD.cpp, Line 2964
Recorder: DVDR/RW DX162D-A, Media type: DVD-R
Disc Manufacturer: RITEKF - 1
Disc Application Code: 64, Disc Physical Code: 193
5:55:25 PM #12 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
5:55:25 PM #13 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1482544 (1482544) = #1482544/329:27.19
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1482544 blocks [D: DVDR/RW DX162D-A]
--------------------------------------------------------------
5:55:25 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [D: DVDR/RW DX162D-A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3036250112, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1482544 | 0 | 0x00
1482544 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
5:55:25 PM #15 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
5:55:25 PM #16 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
5:55:25 PM #17 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
5:55:25 PM #18 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
5:55:25 PM #19 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
5:55:25 PM #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
5:55:25 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
5:55:25 PM #22 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
5:55:25 PM #23 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
5:55:25 PM #24 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
5:55:25 PM #25 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 74390400
6:28:21 PM #26 Text 0 File WriterStatus.cpp, Line 113
<D: DVDR/RW DX162D-A> start writing Lead-Out at LBA 1482544 (169F30h), length 0 blocks
6:29:10 PM #27 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 1482543 (169F2Fh)
6:29:10 PM #28 Phase 37 File dlgbrnst.cpp, Line 1762
Burn process completed successfully at 4x (5,540 KB/s)
6:29:11 PM #29 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:29:12 PM #30 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
6:29:12 PM #31 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** Nero Burning ROM, History File *** ======
|
AfterDawn Addict
|
3. July 2007 @ 08:53 |
Link to this message
|
To my eye it looks like a model burn.
The only thing I would suggest is buying a pack of 'Verbatim' or something that says 'Made in Japan'.
Your disks are Quote:
Disc Manufacturer: RITEKF - 1
and I have had problems of my own with Ritek, although not as consistently bad as you..
BTW can you burn a CD or a data DVD disk?
|
|
Advertisement
|
|
|
|
lswetland
Newbie
|
5. July 2007 @ 08:26 |
Link to this message
|
Thanks for looking over the log.
I am able to burn CDs and data DVDs so it wasn't the drive.
I was using Fujifilm DVDs and then tried Memorex and then Maxell.
It looks like using the Maxell media and CLONE DVD 2 (rather than Nero)is working fine - nine burns and counting!!!
Yippee. So thanks, I think I will just stick with CLONE DVD 2 for the time being.
Truly appreciate that this forum exists and that experienced people like you are willing to share your time and expertise.
Luke
|
|
