|
|
|
Computer i've built won't post??
|
|
Senior Member
|
30. June 2007 @ 05:43 |
Link to this message
|
|
Hi everyone, the problem is with this computer that i've built for my father, i'm baffled at why i can't this computer to post to the bios screen, i just get a black screen so i'm thinking the memory is the culprit, here are the specs:
AMD 4800+ socket AM2
Abit AN52 socket AM2 Motherboard
2GB OCZ DDR2 800 memory
250GB Maxtor Sata/150 HD
HEC Power 550W PSU.
BFG 7800GT OC
I've already tried 2 video cards that i had as extras for testing, a BFG 6600GT and this 7800GT and still no video, these cards work with no problems. The motherboard and Powersupply seem to be running stable as far as i can tell without powering on and off without acting erratic. Now this leaves me with the processor(highly doubt it's the processor) and memory, the motherboard has two blue dimm slots and 2 black dimm slots.. The manual stated to have both dimms on blue channels or the black channels.. I've tried both blue and black and i still get a black screen on startup?? WTF, could it be that this motherboard doesn't like this OCZ memory? Thanks in advance.
Q9550@4.0ghz,Gigabyte EP45-UD3P,OCZ Vendetta 2 cooler,VisionTek 4870X2,1TB Samsung Spinpoint SATA/3GB,4GB G.Skill DDR2 1066,LG Blu-ray/HDDVD combo drive,Corsair HX-1000 Modular,Hannspree 28" LCD,Coolermaster Cosmos S
http://valid.canardpc.com/show_oc.php?id=473095
2 Xbox 360 Jaspers(flashed w/Ixtreme LT), PS3, Wii
Samsung 4071,Samsung 4095, Samsung 245BW LCD Displays This message has been edited since posting. Last time this message was edited on 30. June 2007 @ 05:49
|
|
Advertisement
|
|
|
|
|
ddp
Moderator
|
30. June 2007 @ 08:27 |
Link to this message
|
|
disconnect all cables to drives. clear the cmos as have found that to kick start a stubborn machine. try 1 stick of ram into each slot to see if bad ram or a bad slot. try another psu just for the motherboard testing. try the board outside of the case.
|
AfterDawn Addict
4 product reviews
|
30. June 2007 @ 12:41 |
Link to this message
|
|
It's painfully obvious, but make sure you've got the 4 pin connector for the processor plugged in, it's so often overlooked!
As ddp said, start by looking at each memory module, if you've got a spare PSU it's always a help, although if it turns on, that shouldn't be an issue. Does your case have a PC speaker, if so do you get any form of error code from it?
|
Senior Member
|
30. June 2007 @ 14:23 |
Link to this message
|
|
Hah!! What at an idiot i am, don't laugh at me fellas.. I left the damn ATX 12V cable disconnected!! Duh, as soon as i hooked it up it posted to the bios setup menu. Now i have a the Maxtor 250GB hard without the manufacture disk, how would i install just one drive in a non raid setup, the motherboard book doesn't tell me in detail.. From what i remember from my last build, i turned off raid in the bios, enabled the sata controller, then plugged the HD into sata port 1. Thanks again for all your help guys.
Q9550@4.0ghz,Gigabyte EP45-UD3P,OCZ Vendetta 2 cooler,VisionTek 4870X2,1TB Samsung Spinpoint SATA/3GB,4GB G.Skill DDR2 1066,LG Blu-ray/HDDVD combo drive,Corsair HX-1000 Modular,Hannspree 28" LCD,Coolermaster Cosmos S
http://valid.canardpc.com/show_oc.php?id=473095
2 Xbox 360 Jaspers(flashed w/Ixtreme LT), PS3, Wii
Samsung 4071,Samsung 4095, Samsung 245BW LCD Displays This message has been edited since posting. Last time this message was edited on 30. June 2007 @ 14:24
|
Senior Member
|
30. June 2007 @ 14:27 |
Link to this message
|
|
I just wanted to thank you DDP and Sammorris for helping me out, now i'm trying to get this freakin had formatted so i can install windows. Could i format the HD with disk management on my other PC then bring it back to the new build to install windows? I don't know just a thought, i keep getting Windows can't detect any HD's in Windows setup menu, but in the bios the hd is recognized.
Q9550@4.0ghz,Gigabyte EP45-UD3P,OCZ Vendetta 2 cooler,VisionTek 4870X2,1TB Samsung Spinpoint SATA/3GB,4GB G.Skill DDR2 1066,LG Blu-ray/HDDVD combo drive,Corsair HX-1000 Modular,Hannspree 28" LCD,Coolermaster Cosmos S
http://valid.canardpc.com/show_oc.php?id=473095
2 Xbox 360 Jaspers(flashed w/Ixtreme LT), PS3, Wii
Samsung 4071,Samsung 4095, Samsung 245BW LCD Displays This message has been edited since posting. Last time this message was edited on 30. June 2007 @ 14:28
|
Senior Member
|
30. June 2007 @ 15:26 |
Link to this message
|
|
Update:
I'm installing Windows Xp as we speak, i ended up taking the Maxtor to my other PC and formatted with DiskManagement, things are finally looking up now, it only took me roughly 7 hours to diagnose the problem,LOL!! As you guys already know, building your own is never easy.. Hey, thanks again guys..
Q9550@4.0ghz,Gigabyte EP45-UD3P,OCZ Vendetta 2 cooler,VisionTek 4870X2,1TB Samsung Spinpoint SATA/3GB,4GB G.Skill DDR2 1066,LG Blu-ray/HDDVD combo drive,Corsair HX-1000 Modular,Hannspree 28" LCD,Coolermaster Cosmos S
http://valid.canardpc.com/show_oc.php?id=473095
2 Xbox 360 Jaspers(flashed w/Ixtreme LT), PS3, Wii
Samsung 4071,Samsung 4095, Samsung 245BW LCD Displays |
|
ddp
Moderator
|
30. June 2007 @ 15:50 |
Link to this message
|
|
no problem, teach & learn
|
|
Advertisement
|
|
|
AfterDawn Addict
4 product reviews
|
1. July 2007 @ 05:45 |
Link to this message
|
|
No problem, another case example for my advice!
|
|
