User User name Password  
   
Monday 26.1.2026 / 15:13
Search AfterDawn Forums:        In English   Suomeksi   På svenska
afterdawn.com > forums > pc hardware > other pc hardware > cpu overheating - what to do?
Show topics
 
Forums
Forums
CPU overheating - what to do?
  Jump to:
 
Posted Message
Blighter
Member
_
2. July 2007 @ 06:30 _ Link to this message    Send private message to this user   
Hi guys,

My motherboard died, so I've just replaced it.

Had a few problems, but I've got to a stage now where it shuts itself off within 2 minutes of turning it on.

I checked the temperatures in the BIOS screen and I watch it climb from 70 to 100' (at which point it turns itself off everytime). I'm assuming this isn't a coincidence and that it shuts itself off when the temp gets too high.

Anyway, why would it be overheating? I didn't have any problems with the other motherboard, and i've checked all the fans and they seem to be working (initially i realised that I plugged the cpu fan into the system fan plug(!!) but plugging it into the correct slot hasn't fixed things either!) On the same bios screen it says that the CPU fan speed is '0 rpm' as well. I physically see that it's spinning at a decent speed, but the BIOS says it's 0 - is this because I haven't got the hardware to monitor the CPU fan speed, or is there actually something wrong here?

Any help would be appreciated!

Many thanks,
Blighter
Advertisement
_
__
Senior Member
_
2. July 2007 @ 07:33 _ Link to this message    Send private message to this user   
Did you pu thermal paste on the cpu? Also, try a aftermarket cooler, like something from Zalman. I have one from them and it works great.

As for the BIOS thing, I think there might be something wrong there. Did you plug the cpu fan into the correct spot on the mobo? It should be the fan plug that's closest to the cpu heatsink and fan.

ddp
Moderator
_
2. July 2007 @ 10:59 _ Link to this message    Send private message to this user   
reseat the cpu heatsink fan assembly as most likely 1 side is not seated properly.
Senior Member
_
2. July 2007 @ 12:34 _ Link to this message    Send private message to this user   
it has to b very tight the heat sink to the mobo especially if its a 775 socket

[
Advertisement
_
__
 
_
AfterDawn Addict

2 product reviews
_
2. July 2007 @ 20:24 _ Link to this message    Send private message to this user   
When you were replacing the motherboard and took your cpu out of the old one did you happen to separate the cpu from the heatsink? If you did I think you will have to re-apply the thermal paste. You should probably try reapplying thermal paste anyway, you never know it might be better. Also as Waymon3X6 said get an aftermarket cooler, they are much better than stock coolers. Where is your cpu fan plugged into btw? If it isn't plugged ito a fan header on the motherboard(some fans connect to a molex connector) then the motherboard doesnt know the fan speed.

This message has been edited since posting. Last time this message was edited on 2. July 2007 @ 20:24

afterdawn.com > forums > pc hardware > other pc hardware > cpu overheating - what to do?
 

Digital video: AfterDawn.com | AfterDawn Forums
Music: MP3Lizard.com
Gaming: Blasteroids.com | Blasteroids Forums | Compare game prices
Software: Software downloads
Blogs: User profile pages
RSS feeds: AfterDawn.com News | Software updates | AfterDawn Forums
International: AfterDawn in Finnish | AfterDawn in Swedish | AfterDawn in Norwegian | download.fi
Navigate: Search | Site map
About us: About AfterDawn Ltd | Advertise on our sites | Rules, Restrictions, Legal disclaimer & Privacy policy
Contact us: Send feedback | Contact our media sales team
 
  © 1999-2026 by AfterDawn Ltd.

  IDG TechNetwork