|
|
|
Unknown Burn Phase with Nero 6.6.0.16
|
|
|
moocowgal
Junior Member
|
7. July 2007 @ 12:45 |
Link to this message
|
I started out with an invalid block address problem and read the forum posts dealing with that. I Uninstalled Nero and used clean tool then checked my firmware for the burner I'm using and it's the latest that LiteOn had on the site. Downloaded Adaptec Aspi and ran ASPICHK which didn't show an aspi layer so I installed it Version 4.71.20.
After all that when I tried to burn again I got the invalid burn phase and at the end of the burn it failed. I would appreciate it if someone could enlighten me as to what the problem could still be. I changed burners because the same thing was happening to the Plextor external burner I was using. I put that burner into another machine and it works fine. This burner worked fine too before I swapped it.
Here's the log of my last burn:
Mama
1A21
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 9:20:56 AM
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 6:35:34 PM
Nero Version: 6.6.0.18
Internal Version: 6, 6, 0, 18e
Recorder: <LITE-ON DVDRW LDW-411S> Version: FS0K - HA 2 TA 0 - 6.6.0.18
Adapter driver: <> HA 2
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <JLMS DVD-ROM XJ-HD166>Version: DD05 - HA 1 TA 1 - 6.6.0.18
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD400BB-75JHA0 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : DVDR/RW DD1601 atapi Port 1 ID 0 DMA: On
CdRomPeripheral : JLMS DVD-ROM XJ-HD166 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
DVDR/RW DD1601 D: CDRom0
JLMS DVD-ROM XJ-HD166 E: CDRom1
LITE-ON DVDRW LDW-411S F: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1021MB (1046508kB)
Free physical memory: 584MB (598092kB)
Memory in use : 42 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
7.7.2007
UDF/ISO compilation
10:39:13 AM #1 Phase 112 File dlgbrnst.cpp, Line 1832
Unknown BurnPhase
10:39:13 AM #2 Phase 114 File dlgbrnst.cpp, Line 1832
Unknown BurnPhase
10:39:13 AM #3 Text 0 File Isodoc.cpp, Line 6359
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
10:39:13 AM #4 Phase 111 File dlgbrnst.cpp, Line 1832
Unknown BurnPhase
10:39:13 AM #5 Text 0 File Reader.cpp, Line 127
Reader running
10:39:13 AM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW LDW-411S running
10:39:13 AM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:39:13 AM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
10:39:13 AM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
10:39:13 AM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2202143 (489:21.68, 4301MB)
10:39:13 AM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
10:39:13 AM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW LDW-411S, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:39:13 AM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:39:13 AM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2202144 (2202144) = #2202144/489:21.69
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2202144 blocks [LITE-ON DVDRW LDW-411S]
--------------------------------------------------------------
10:39:13 AM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW LDW-411S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4509990912, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2202144 | lead-out | 1 | 0x41 | 0x00
10:39:13 AM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Unknown BurnPhase
10:39:14 AM #17 Text 0 File Burncd.cpp, Line 4122
Cache writing successful.
10:39:14 AM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Unknown BurnPhase
10:39:14 AM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Unknown BurnPhase
10:39:14 AM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:39:14 AM #21 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 0 h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:39:14 AM #22 Text 0 File DVDPlusRW.cpp, Line 659
Start write address at LBA 0
DVD high compatibility mode: Yes
11:01:51 AM #23 SCSI -1064 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 2, TA 0, LUN 0, buffer 0x03610000
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x21
Sense Qual: 0x02
CDB Data: 0x2A 0x00 0x00 0x20 0xE6 0xE0 0x00 0x00 0x20 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x21 0x02
11:01:51 AM #24 CDR -1064 File Writer.cpp, Line 311
Unknown CDR error
11:01:51 AM #25 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
11:01:51 AM #26 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
11:02:14 AM #27 Phase 38 File dlgbrnst.cpp, Line 1832
Unknown BurnPhase
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 8/17/2001 4:07:32 PM
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 11/3/2005 4:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002), size=16877 bytes, created 7/17/2002 8:53:02 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.11B, size=46080 bytes, created 11/3/2005 4:00:00 AM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:44 AM (Adapter driver for src)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any suggestions would be greatly appreciated. Thanks.
|
AfterDawn Addict
|
8. July 2007 @ 02:35 |
Link to this message
|
Did you install 'InCd'?
If you did, try a cleanout and fresh install of Nero without InCd, but before reinstalling, try burning something with the likes of IMGBurn or DVD Decrypter just to prove your burner and media are ok.
|
|
moocowgal
Junior Member
|
8. July 2007 @ 11:53 |
Link to this message
|
|
Thank you attar. I'm betting that it's not my burner since I removed it from this machine and put it in another one and it burned fine. The media, same thing. Used it as well. I put the burner back in this machine and have had 3 successful burns but instead of the normal listing of what stage the burn was at all I get is "Unknown Burn Phase". Even at the end of the burn when the successful burn message usually comes up, the box pops up and says... you got it... "Unknown Burn Phase"
|
|
Advertisement
|
|
|
|
moocowgal
Junior Member
|
8. July 2007 @ 17:53 |
Link to this message
|
The clean install of Nero took care of that "unknown burn phase" ty again attar!
|
|
