|
|
|
Could not perform start of Disc-at-once
|
|
|
nicolasr
Newbie
|
23. August 2007 @ 09:48 |
Link to this message
|
Hello,
I got this error msg while burning a DVD-R with nero.
The DVD-R is a TDK 16X. Perhaps the disk is the problem since my recorder (<_NEC DVD_RW ND-2510A) can only burn up to 4X (I think).
Nevertheless, even If I tell to Nero to buen at 1X speed, I got the same error :
Nicolas
a
1A...
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?, size=6656 bytes, created 7/10/2003 18:08:44
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 26/10/2004 18:35:34
Nero Version: 6.6.0.15
Internal Version: 6, 6, 0, 15h
Recorder: <_NEC DVD_RW ND-2510A> Version: 2.54 - HA 0 TA 1 - 6.6.0.15
Adapter driver: HA 0
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: Version: 0N21 - HA 0 TA 0 - 6.6.0.15
Adapter driver: HA 0
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST DVD-ROM GDR8163B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : _NEC DVD_RW ND-2510A atapi Port 0 ID 1 DMA: On
DiskPeripheral : ST3200822AS atapi Port 1 ID 0 DMA: On
CdRomPeripheral : XI5046D LEM850I 1.0 dtscsi Port 4 ID 0 DMA: Off
=== CDRom-Device-Map ===
HL-DT-ST DVD-ROM GDR8163B D: CDRom0
_NEC DVD_RW ND-2510A E: CDRom1
XI5046D LEM850I L: CDRom2
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1023MB (1048044kB)
Free physical memory: 484MB (496328kB)
Memory in use : 52 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
23.8.2007
ISO compilation
19:27:23 #1 Text 0 File Isodoc.cpp, Line 6314
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
19:27:23 #2 Text 0 File Reader.cpp, Line 127
Reader running
19:27:23 #3 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
19:27:23 #4 Text 0 File Burncd.cpp, Line 3231
Turn on Disc-At-Once, using DVD media
19:27:29 #5 Text 0 File DlgWaitCD.cpp, Line 269
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 2148607 (477:28.07, 4196MB)
19:27:29 #6 Text 0 File DlgWaitCD.cpp, Line 281
Write in overburning mode: NO (enabled: CD)
19:27:29 #7 Text 0 File DlgWaitCD.cpp, Line 2477
Recorder: _NEC DVD_RW ND-2510A, Media type: DVD-R
Disc Manufacturer: TTH02 -
Disc Application Code: 64, Disc Physical Code: 193
19:27:29 #8 Text 0 File DlgWaitCD.cpp, Line 447
>>> Protocol of DlgWaitCD activities: <<<
=========================================
19:27:29 #9 Text 0 File ThreadedTransferInterface.cpp, Line 830
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2148608 (2148608) = #2148608/477:28.8
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2148608 blocks [_NEC DVD_RW ND-2510A]
--------------------------------------------------------------
19:27:29 #10 Text 0 File ThreadedTransferInterface.cpp, Line 1043
Prepare recorder [_NEC DVD_RW ND-2510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4400349184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2148608 | lead-out | 1 | 0x41 | 0x00
19:27:29 #11 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
19:27:29 #12 Text 0 File Burncd.cpp, Line 4116
Cache writing successful.
19:27:29 #13 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
19:27:29 #14 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3.324 KB/s)
19:27:29 #15 Text 0 File ThreadedTransferInterface.cpp, Line 2643
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
19:27:29 #16 Text 0 File DVDR.cpp, Line 2357
Recording mode: Sequential Recording Mode
19:27:29 #17 Text 0 File Mmc.cpp, Line 21663
Set BUFE: Buffer underrun protection -> ON
19:27:29 #18 Text 0 File DVDR.cpp, Line 2511
Start write address at LBA 0
DVD high compatibility mode: Yes
19:27:29 #19 Text 0 File Cdrdrv.cpp, Line 8821
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 5
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 60 00 10 20 30 40 50 - 00 00 00 21 00 00 00 00 .`...0@P...!....
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
19:27:29 #20 SCSI -1046 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 0, TA 1, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x30
Sense Qual: 0x05
CDB Data: 0x53 0x00 0x00 0x00 0x00 0x00 0x20 0xC9 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x30 0x05
19:27:29 #21 CDR -1046 File ThreadedTransferInterface.cpp, Line 1763
Illegal disc
19:27:29 #22 TRANSFER -27 File ThreadedTransferInterface.cpp, Line 1763
Could not perform start of Disc-at-once
19:27:29 #23 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3.324 KB/s)
Existing drivers:
File 'Drivers\ADPU160M.SYS': Ver=v3.60a (Lab01_N(johnstra).010529-2218), size=101888 bytes, created 17/08/2001 22:07:32
File 'Drivers\PXHELP20.SYS': Ver=2.03.01a, size=20368 bytes, created 6/05/2004 2:03:00 (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 3/08/2004 22:59:44 (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Any help is welcome ;-)
Thanks
This message has been edited since posting. Last time this message was edited on 23. August 2007 @ 14:25
|
|
Advertisement
|
|
|
|
Moderator
|
23. August 2007 @ 12:41 |
Link to this message
|
Hi nicolasr
1st thing edit out the serial # in the log - it begins w/ 1A. Don't need someone else using it.
Did the NEC come with the pc or did you buy it separately? if it came with the pc who is the manufacturer? Trying to check and see of the firmware is up to date. That's usually what the illegal disc error in the log means - the firmware doesn't support the media you are using.
WinAspi: File 'Wnaspi32.dll': Ver=?.?.?.?,
Check your aspi in Toolkit. In smartstart go to toolkit>info tool>aspi tab. See if anything shows corrupted. If it does post that back.
If it says aspi not installed - that's ok.
Try using other media - like Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell.
|
|
nicolasr
Newbie
|
3. September 2007 @ 11:40 |
Link to this message
|
Thanks for the reply
The NEC came with the PC (Packard Bell iMedia 5042)
How can I check the firmware (sorry, I have never updated any firmware) ?
EDIT: found a firmware update: http://www.de.nec.de/software/2484_FW_ND-2510A_win219-20A.zip
The update concerns the DVD 16X ==> seems the good one, but says it is NOT for oem !! => not for me. What can I do ? any idea ?
Thanks again
This message has been edited since posting. Last time this message was edited on 3. September 2007 @ 12:17
|
Moderator
|
3. September 2007 @ 14:50 |
Link to this message
|
|
Not a problem
For the firmware update you'll need to check Packard Bells site to see if there is one. There may not be - pc manufacturers aren't the best at keeping the drives firmware updated for newer media.
Switch the media to the ones listed above. Try 8x media too if you can find it - will hopefully be more supported with this drives firmware.
|
|
nicolasr
Newbie
|
4. September 2007 @ 09:36 |
Link to this message
|
Hello,
if I good understand, if Packard Bell doesn't supply an update, I cannot update the firmware ! (I have not found an update at Pack. Bell :-( )
The only solution is to buy not-16X media ?
|
Moderator
|
4. September 2007 @ 12:17 |
Link to this message
|
That's about right - you can try the one from NEC's page. usually if it's not the right one you'll get a message saying 'target device not found' - no harm.
Or you can try the modified 2.19 firmware here - link.
I recommend 8x media when a drive hasn't had an update in awhile cause usually the 8x media is more supported.
|
|
nicolasr
Newbie
|
4. September 2007 @ 13:50 |
Link to this message
|
|
|
|
Advertisement
|
|
|
Moderator
|
4. September 2007 @ 14:33 |
Link to this message
|
|
Thanks for posting that!
Hopefully the firmware update will do the trick.
|
|
