|
|
|
another burn problem
|
|
|
Jerry66
Newbie
|
25. August 2007 @ 16:21 |
Link to this message
|
Trying to burn an .iso file to a mpeg or someother file that will play on my dvd player. The log is as follows. Any help appreciated.
1C83-7221-10E5-477X-405C-3740-****
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: Version: 1.0b - HA 1 TA 0 - 7.10.1.0
Adapter driver: HA 1
Drive buffer : 8192kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: Version: DYS3 - HA 1 TA 1 - 7.10.1.0
Adapter driver: HA 1
=== Scsi-Device-Map ===
DiskPeripheral : SiI RAID 0 Set 0 si3112r Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-510A nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD-ROM DDU1612 nvatabus Port 1 ID 1 DMA: Off
DiskPeripheral : WDC WD2000JB-22GVA0 nvatabus Port 1 ID 2 DMA: Off
=== CDRom-Device-Map ===
SONY DVD RW DRU-510A D: CdRom0
SONY DVD-ROM DDU1612 E: CdRom1
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1048048kB)
Free physical memory: 449MB (460128kB)
Memory in use : 56 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
25.8.2007
UDF compilation
12:44:33 PM #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:44:34 PM #2 Text 0 File Isodoc.cpp, Line 6666
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : pure
UDF Options : automatic
UDF Revision : 1.02
UDF Partition Type : physical
12:44:34 PM #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
12:44:34 PM #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1506495 (334:46.45, 2942MB)
12:44:34 PM #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
12:44:34 PM #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW DRU-510A, Media type: DVD-R
Disc Manufacturer: CMC MA - G. AF1
Disc Application Code: 64, Disc Physical Code: 193
12:44:34 PM #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:44:34 PM #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1506496 (1506496) = #1506496/334:46.46
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1506496 blocks [D: SONY DVD RW DRU-510A]
--------------------------------------------------------------
12:44:34 PM #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [D: SONY DVD RW DRU-510A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3085303808, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 1506496 | 0 | 0x00
1506496 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
12:44:34 PM #10 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Incorrect function.
12:44:34 PM #11 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 1 on DismountVolue: Incorrect function.
12:44:34 PM #12 Text 0 File SCSIPTICommands.cpp, Line 238
Error on LockVolume: Incorrect function.
12:44:34 PM #13 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
12:44:34 PM #14 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
12:44:34 PM #15 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
12:44:34 PM #16 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
12:44:34 PM #17 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 4x (5,540 KB/s)
12:44:35 PM #18 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:44:35 PM #19 Text 0 File DVDR.cpp, Line 3225
Recording mode: Sequential Recording Mode
12:44:35 PM #20 Text 0 File DVDR.cpp, Line 3381
Start write address at LBA 0
DVD high compatibility mode: Yes
12:44:35 PM #21 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAC 00 00 00 00 00 00 00 00 64 00 00
Sense Area: 0x70 00 05 00 00 00 00 12 00 00 00 00 24 00 00 CC 00 01
Buffer x066c6340: Len x648
12:44:35 PM #22 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-R (2), Part Version: 2.0x (5), Extended Part Version: 0.0 (0)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Revision number of maximum recording speed: -
Revision number of minimum recording speed: -
Revision number table of recording speed: - - - - - - -
Class: 0
Start sector number of the current Border-Out: 0 h
Start sector number of the next Border-In: 0 h
Media Specific [16..63]:
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
12:44:35 PM #23 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
12:44:37 PM #24 Text 0 File Cdrdrv.cpp, Line 1352
12:44:37.046 - D: SONY DVD RW DRU-510A : Queue again later
12:45:42 PM #25 Text 0 File Cdrdrv.cpp, Line 1352
12:45:42.406 - D: SONY DVD RW DRU-510A : Queue again later
12:46:20 PM #26 Text 0 File Cdrdrv.cpp, Line 1352
12:46:20.250 - D: SONY DVD RW DRU-510A : Queue again later
12:46:40 PM #27 Text 0 File Cdrdrv.cpp, Line 1352
12:46:40.406 - D: SONY DVD RW DRU-510A : Queue again later
12:46:41 PM #28 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x08
CDB Data: 0x2A 00 00 02 5C 00 00 00 20 00 00 00
Sense Area: 0xF1 00 03 00 02 53 21 12 00 00 00 00 0C 08
Buffer x0cfef9c0: Len x10000
0x00 00 01 BA 44 2E 3E 40 04 01 01 89 C3 F8 00 00
0x01 E0 07 EC 81 00 00 50 1A 19 B3 5F A3 80 1B 00
0x9C 04 21 A4 36 4F E9 BE 28 8E 06 10 E5 BE F1 17
12:46:41 PM #29 CDR -1135 File Writer.cpp, Line 303
Write error
D: SONY DVD RW DRU-510A
12:46:42 PM #30 Text 0 File DVDR.cpp, Line 3783
EndDAO: Last written address was 154623 (25BFFh)
12:46:43 PM #31 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 4x (5,540 KB/s)
12:46:45 PM #32 Text 0 File SCSIPTICommands.cpp, Line 288
SPTI - Error 1 on DismountVolue: Incorrect function.
12:46:49 PM #33 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
12:46:49 PM #34 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Moderator
|
25. August 2007 @ 18:04 |
Link to this message
|
Hi Jerry66
Here's some suggestions:
Recorder: Version: 1.0b
Update the firmware of the drive to the latest - 1.1A
DiskPeripheral : SiI RAID 0 Set 0 si3112r Port 0 ID 0 DMA: Off
CdRomPeripheral : SONY DVD RW DRU-510A nvatabus Port 1 ID 0 DMA: Off
CdRomPeripheral : SONY DVD-ROM DDU1612 nvatabus Port 1 ID 1 DMA: Off
DiskPeripheral : WDC WD2000JB-22GVA0 nvatabus Port 1 ID 2 DMA: Off
Check and make sure all your drives are in DMA mode and not PIO mode. They may be but Nero doesn't report nvidia or raid correctly. Here's a guide to get you in the right direction - guide
Disc Manufacturer: CMC MA - G. AF1
Not the best at all. Try different media like Verbatim, Taiyo Yuden or made in Japan Sony, Fuji or Maxell. For this drive though I would look for media rated no higher than 8x. The firmware update was in 2004 so newer 16x media may be hit or miss with it.
|
|
Jerry66
Newbie
|
25. August 2007 @ 19:13 |
Link to this message
|
|
Thank you binkie7. I will give that a try.
|
|
