|
|
|
Memory Error & Crash when trying to burn using NeroVision
|
|
|
pirate81
Newbie
|
29. August 2007 @ 06:58 |
Link to this message
|
When i try to burn using my nerovision express 3 software I get the following error message: "The Instruction at 0x006b6c44 referenced memory at 0x01513918. The Memory Could Not Be "read". Click OK to terminate"
I was reading a previous thread about this same problem from a few years ago on here but I couldnt post to it. I'm including my log files to try to help the process go faster. This problem also used to occur when I tried to add chapters and when trying to preview the animation for the buttons, but after re-installing those went away and now I have this one. Please help.
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: DVD-RW GSA-H11N>Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 170MB (174476kB)
Memory in use : 66
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
17.8.2007
NeroAPI
6:04:06 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
6:04:07 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:04:10 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:04:10 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:04:10 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
6:04:11 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2236607 (497:01.32, 4368MB)
6:04:11 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:04:11 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+RW
Disc Manufacturer ID: RICOHJPN, Media Type ID: W11, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 1
6:04:11 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:04:11 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2236608 (2236608) = #2236608/497:1.33
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2236608 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
6:04:11 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4580573184, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2236608 | lead-out | 1 | 0x41 | 0x00
6:04:11 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:04:11 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
6:04:11 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
6:04:11 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
6:04:11 PM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)
6:04:12 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:04:12 PM #18 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: re-writable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 1DFCAF h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 01 52 49 43 4F 48 - 4A 50 4E 57 31 31 01 39 ...RICOHJPNW11.9
23 00 8A 86 68 02 26 00 - 8A 86 70 02 28 00 8A 86 #...h.&...p.(...
6A 02 28 22 12 10 E0 00 - F0 00 00 00 00 00 00 00 j.("............
6:04:12 PM #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
6:18:25 PM #20 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 2236608 (2220C0h), length 0 blocks
6:18:27 PM #21 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 4x (5,540 KB/s)
6:18:28 PM #22 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:18:34 PM #23 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
6:18:34 PM #24 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 254MB (260968kB)
Memory in use : 49
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.8.2007
NeroAPI
10:27:59 AM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
10:27:59 AM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:28:00 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:28:00 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:28:00 AM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
10:28:02 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1650351 (366:44.51, 3223MB)
10:28:02 AM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:28:02 AM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCW004
Disc Application Code: 2, Disc Physical Code: 214
10:28:02 AM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:28:02 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1650352 (1650352) = #1650352/366:44.52
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1650352 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
10:28:03 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3379920896, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1650352 | lead-out | 1 | 0x41 | 0x00
10:28:03 AM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:28:03 AM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
10:28:03 AM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
10:28:03 AM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
10:28:03 AM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)
10:28:03 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:28:03 AM #18 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode
10:28:03 AM #19 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes
10:28:03 AM #20 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: - (3)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
00 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
10:28:18 AM #21 Text 0 File Cdrdrv.cpp, Line 1224
10:28:18.640 - I: HL-DT-ST DVD-RW GSA-H11N : Queue again later
10:38:47 AM #22 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1650352 (192EB0h), length 0 blocks
10:39:20 AM #23 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 1650367
10:39:20 AM #24 Phase 181 File APIProgress.cpp, Line 275
Writing lead-out...
10:39:20 AM #25 Text 0 File DVDR.cpp, Line 3279
Estimated time for 30mm Borders: 0min 00sec
10:39:20 AM #26 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 4x (5,540 KB/s)
10:39:21 AM #27 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:39:26 AM #28 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
10:39:26 AM #29 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 315MB (322612kB)
Memory in use : 37
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.8.2007
NeroAPI
12:24:57 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
12:24:57 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:25:00 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:25:00 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:25:00 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
12:25:00 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1926591 (428:07.66, 3762MB)
12:25:00 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:25:00 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:25:00 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:25:00 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1926592 (1926592) = #1926592/428:7.67
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1926592 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
12:25:01 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3945660416, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1926592 | lead-out | 1 | 0x41 | 0x00
12:25:01 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:25:01 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
12:25:01 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
12:25:01 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
12:25:01 PM #16 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 16x (22,160 KB/s)
12:25:01 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:25:01 PM #18 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:25:01 PM #19 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
12:30:14 PM #20 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1926592 (1D65C0h), length 0 blocks
12:30:37 PM #21 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 16x (22,160 KB/s)
12:30:38 PM #22 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:30:44 PM #23 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
12:30:44 PM #24 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 326MB (334756kB)
Memory in use : 34
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
19.8.2007
NeroAPI
9:01:13 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
9:01:14 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
9:01:14 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:01:14 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
9:01:14 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
9:01:15 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1827887 (406:11.62, 3570MB)
9:01:15 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
9:01:15 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
9:01:15 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
9:01:15 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1827888 (1827888) = #1827888/406:11.63
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1827888 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
9:01:15 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3743514624, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1827888 | lead-out | 1 | 0x41 | 0x00
9:01:15 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
9:01:15 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
9:01:15 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
9:01:15 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
9:01:15 PM #16 Phase 28 File APIProgress.cpp, Line 275
Speed measurement started
9:01:15 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:05:05 PM #18 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1827888 (1BE430h), length 0 blocks
9:05:05 PM #19 Phase 29 File APIProgress.cpp, Line 275
Speed measurement completed: 11.5x (15,960 KB/s)
9:05:05 PM #20 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 8x (11,080 KB/s)
9:05:05 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
9:05:05 PM #22 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
9:05:05 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
9:11:11 PM #24 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1827888 (1BE430h), length 0 blocks
9:11:33 PM #25 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 8x (11,080 KB/s)
9:11:34 PM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
9:11:40 PM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
9:11:40 PM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 309MB (316624kB)
Memory in use : 38
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.8.2007
NeroAPI
10:04:38 AM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
10:04:39 AM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:04:57 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:04:57 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:04:57 AM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
10:04:57 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1520239 (337:49.64, 2969MB)
10:04:57 AM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:04:57 AM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:04:57 AM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:04:57 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1520240 (1520240) = #1520240/337:49.65
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1520240 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
10:04:57 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3113451520, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1520240 | lead-out | 1 | 0x41 | 0x00
10:04:57 AM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:04:57 AM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
10:04:57 AM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
10:04:57 AM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
10:04:57 AM #16 Phase 28 File APIProgress.cpp, Line 275
Speed measurement started
10:04:57 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:06:22 AM #18 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1520240 (173270h), length 0 blocks
10:06:22 AM #19 Phase 29 File APIProgress.cpp, Line 275
Speed measurement completed: 26x (36,008 KB/s)
10:06:22 AM #20 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 16x (22,160 KB/s)
10:06:22 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:06:22 AM #22 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:06:22 AM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
10:10:24 AM #24 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1520240 (173270h), length 0 blocks
10:10:43 AM #25 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 16x (22,160 KB/s)
10:10:44 AM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:10:50 AM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
10:10:50 AM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 321MB (329364kB)
Memory in use : 35
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.8.2007
NeroAPI
11:34:08 AM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
11:34:08 AM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
11:34:08 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:34:08 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
11:34:08 AM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
11:34:09 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2128047 (472:53.72, 4156MB)
11:34:09 AM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
11:34:09 AM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
11:34:09 AM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
11:34:09 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2128048 (2128048) = #2128048/472:53.73
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2128048 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
11:34:09 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4358242304, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2128048 | lead-out | 1 | 0x41 | 0x00
11:34:09 AM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
11:34:09 AM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
11:34:09 AM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
11:34:09 AM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
11:34:09 AM #16 Phase 28 File APIProgress.cpp, Line 275
Speed measurement started
11:34:09 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:36:03 AM #18 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 2128048 (2078B0h), length 0 blocks
11:36:03 AM #19 Phase 29 File APIProgress.cpp, Line 275
Speed measurement completed: 27x (37,374 KB/s)
11:36:03 AM #20 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 16x (22,160 KB/s)
11:36:03 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
11:36:03 AM #22 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
11:36:03 AM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
11:41:04 AM #24 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 2128048 (2078B0h), length 0 blocks
11:41:23 AM #25 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 16x (22,160 KB/s)
11:41:24 AM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
11:41:30 AM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
11:41:30 AM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 330MB (338044kB)
Memory in use : 34
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.8.2007
NeroAPI
1:35:22 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
1:35:23 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
1:35:25 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:35:25 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
1:35:25 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
1:35:26 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1826351 (405:51.26, 3567MB)
1:35:26 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
1:35:26 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
1:35:26 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
1:35:26 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1826352 (1826352) = #1826352/405:51.27
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1826352 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
1:35:26 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3740368896, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1826352 | lead-out | 1 | 0x41 | 0x00
1:35:26 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
1:35:26 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
1:35:26 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
1:35:26 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
1:35:26 PM #16 Phase 28 File APIProgress.cpp, Line 275
Speed measurement started
1:35:26 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:37:05 PM #18 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1826352 (1BDE30h), length 0 blocks
1:37:05 PM #19 Phase 29 File APIProgress.cpp, Line 275
Speed measurement completed: 26.8x (37,018 KB/s)
1:37:05 PM #20 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 16x (22,160 KB/s)
1:37:05 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
1:37:06 PM #22 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
1:37:06 PM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
1:41:37 PM #24 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1826352 (1BDE30h), length 0 blocks
1:41:56 PM #25 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 16x (22,160 KB/s)
1:41:57 PM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
1:42:03 PM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
1:42:03 PM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 73400320 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 501MB (513908kB)
Free physical memory: 162MB (166440kB)
Memory in use : 67
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
20.8.2007
NeroAPI
6:08:05 PM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
6:08:06 PM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
6:08:09 PM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:08:09 PM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
6:08:09 PM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
6:08:12 PM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2298495 (510:46.45, 4489MB)
Last address to be written: 1669295 (370:57.20, 3260MB)
6:08:12 PM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
6:08:12 PM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD-RW
Disc Manufacturer: OPTODI - SCW004
Disc Application Code: 2, Disc Physical Code: 214
6:08:12 PM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
6:08:12 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1669296 (1669296) = #1669296/370:57.21
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1669296 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
6:08:12 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3418718208, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1669296 | lead-out | 1 | 0x41 | 0x00
6:08:12 PM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
6:08:12 PM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
6:08:12 PM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
6:08:12 PM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
6:08:12 PM #16 Phase 28 File APIProgress.cpp, Line 275
Speed measurement started
6:08:12 PM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:09:40 PM #18 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1669296 (1978B0h), length 0 blocks
6:09:40 PM #19 Phase 29 File APIProgress.cpp, Line 275
Speed measurement completed: 28.2x (39,032 KB/s)
6:09:40 PM #20 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 4x (5,540 KB/s)
6:09:40 PM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
6:09:40 PM #22 Text 0 File DVDR.cpp, Line 2846
Recording mode: Sequential Recording Mode
6:09:40 PM #23 Text 0 File DVDR.cpp, Line 3002
Start write address at LBA 0
DVD high compatibility mode: Yes
6:09:40 PM #24 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-RW (3), Part Version: - (3)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26127F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) exist
Start sector number of the current Border-Out: 2FE10 h
Start sector number of the next Border-In: 2FFA0 h
Media Specific [16..63]:
80 20 10 00 00 00 00 00 - 00 00 03 12 00 00 00 00 ................
00 02 FE 10 00 02 FF A0 - 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 - 00 00 00 00 00 00 00 00 ................
6:09:51 PM #25 Text 0 File Cdrdrv.cpp, Line 1224
18:09:51.250 - I: HL-DT-ST DVD-RW GSA-H11N : Queue again later
6:20:11 PM #26 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1669296 (1978B0h), length 0 blocks
6:20:44 PM #27 Text 0 File DVDR.cpp, Line 3246
EndDAO: Last written address was 1669311
6:20:44 PM #28 Phase 181 File APIProgress.cpp, Line 275
Writing lead-out...
6:20:44 PM #29 Text 0 File DVDR.cpp, Line 3279
Estimated time for 30mm Borders: 0min 00sec
6:20:44 PM #30 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 4x (5,540 KB/s)
6:20:45 PM #31 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
6:20:50 PM #32 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
6:20:50 PM #33 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2037MB (2086824kB)
Free physical memory: 1168MB (1196796kB)
Memory in use : 42
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.8.2007
NeroAPI
12:19:04 AM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
12:19:05 AM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
12:19:06 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:19:06 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
12:19:06 AM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
12:19:07 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 1743007 (387:20.07, 3404MB)
12:19:07 AM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
12:19:07 AM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
12:19:07 AM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
12:19:07 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 1743008 (1743008) = #1743008/387:20.8
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 1743008 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
12:19:07 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 3569680384, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
1743008 | lead-out | 1 | 0x41 | 0x00
12:19:07 AM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
12:19:07 AM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
12:19:07 AM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
12:19:07 AM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
12:19:07 AM #16 Phase 28 File APIProgress.cpp, Line 275
Speed measurement started
12:19:07 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:21:03 AM #18 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1743008 (1A98A0h), length 0 blocks
12:21:04 AM #19 Phase 29 File APIProgress.cpp, Line 275
Speed measurement completed: 21.6x (29,870 KB/s)
12:21:04 AM #20 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 16x (22,160 KB/s)
12:21:04 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
12:21:04 AM #22 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
12:21:04 AM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
12:25:27 AM #24 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 1743008 (1A98A0h), length 0 blocks
12:25:47 AM #25 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 16x (22,160 KB/s)
12:25:48 AM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
12:25:54 AM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
12:25:54 AM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
Windows XP 5.1
IA32
WinAspi: -
ahead WinASPI: File 'C:\Program Files\Ahead\Nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 11/2/2004 1:54:32 PM
NT-SPTI used
Nero API version: 6.6.1.15
Using interface version: 6.6.0.14
Installed in: C:\Program Files\Ahead\Nero\
Application: ahead\NeroVision
Internal Version: 6, 6, 1, 15
Recorder: Version: JG03 - HA 1 TA 0 - 6.6.1.15
Adapter driver: HA 1
Drive buffer : 2048kB
Bus Type : via Inquiry data (1) -> ATAPI, detected: ?
Connected to MMC as unknown drive with class-nr : 1
Drive is autodetected - recorder class: Std. MMC recorder
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JS-00NCB1 atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD-RW GSA-H11N atapi Port 1 ID 0 DMA: On
=== CDRom-Device-Map ===
HL-DT-ST DVD-RW GSA-H11N I: CDRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 2037MB (2086824kB)
Free physical memory: 1418MB (1452936kB)
Memory in use : 30
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
24.8.2007
NeroAPI
10:29:29 AM #1 Phase 111 File APIProgress.cpp, Line 275
DVD-Video files sorted
10:29:29 AM #2 Text 0 File SCSIPTICommands.cpp, Line 403
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
10:29:29 AM #3 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:29:29 AM #4 ISO9660GEN -11 File geniso.cpp, Line 3312
First writeable address = 0 (0x00000000)
10:29:29 AM #5 Text 0 File Burncd.cpp, Line 3316
Turn on Disc-At-Once, using DVD media
10:29:30 AM #6 Text 0 File DlgWaitCD.cpp, Line 281
Last possible write address on media: 2295103 (510:01.28, 4482MB)
Last address to be written: 2041855 (453:44.55, 3987MB)
10:29:30 AM #7 Text 0 File DlgWaitCD.cpp, Line 293
Write in overburning mode: NO (enabled: CD)
10:29:30 AM #8 Text 0 File DlgWaitCD.cpp, Line 2616
Recorder: HL-DT-ST DVD-RW GSA-H11N, Media type: DVD+R
Disc Manufacturer ID: MCC, Media Type ID: 004, Product revision number: 0
Disc Application Code: 0, Extended Information Indicators: 7
10:29:30 AM #9 Text 0 File DlgWaitCD.cpp, Line 459
>>> Protocol of DlgWaitCD activities: <<<
=========================================
10:29:30 AM #10 Text 0 File ThreadedTransferInterface.cpp, Line 814
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 2041856 (2041856) = #2041856/453:44.56
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2041856 blocks [HL-DT-ST DVD-RW GSA-H11N ]
--------------------------------------------------------------
10:29:30 AM #11 Text 0 File ThreadedTransferInterface.cpp, Line 1013
Prepare recorder [HL-DT-ST DVD-RW GSA-H11N] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 4181721088, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
2041856 | lead-out | 1 | 0x41 | 0x00
10:29:30 AM #12 Text 0 File SCSIPTICommands.cpp, Line 208
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
10:29:30 AM #13 Phase 24 File APIProgress.cpp, Line 275
Caching of files started
10:29:30 AM #14 Text 0 File Burncd.cpp, Line 4158
Cache writing successful.
10:29:30 AM #15 Phase 25 File APIProgress.cpp, Line 275
Caching of files completed
10:29:30 AM #16 Phase 28 File APIProgress.cpp, Line 275
Speed measurement started
10:29:30 AM #17 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:30:55 AM #18 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 2041856 (1F2800h), length 0 blocks
10:30:55 AM #19 Phase 29 File APIProgress.cpp, Line 275
Speed measurement completed: 34.9x (48,212 KB/s)
10:30:55 AM #20 Phase 36 File APIProgress.cpp, Line 275
Burn process started at 16x (22,160 KB/s)
10:30:55 AM #21 Text 0 File ThreadedTransferInterface.cpp, Line 2717
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
10:30:55 AM #22 Text 0 File Cdrdrv.cpp, Line 8737
---- DVD Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R (10), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: (F h)
Number of Layers: 1, Track Path: Parallel Track Path (PTP), Layer Type: recordable
Linear Density: 0,267 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: 26053F h
End Sector Number in Layer 0: 0 h (LBN: FFFD0000 h, 4193920 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 7 h
Disc Manufacturer ID: MCC.....
Media type ID: 004
Product revision number: 0
Number of Physical format information bytes in use in ADIP up to byte 63: 56
Media Specific [16..63]:
00 00 07 4D 43 43 00 00 - 00 00 00 30 30 34 00 38 ...MCC.....004.8
23 54 37 12 02 54 6C 02 - 92 5F 15 15 0B 0B 08 08 #T7..Tl.._......
01 19 1B 0C 0C 0C 0D 01 - 00 00 00 00 00 00 00 00 ................
10:30:55 AM #23 Text 0 File DVDPlusRW.cpp, Line 666
Start write address at LBA 0
DVD high compatibility mode: Yes
10:35:47 AM #24 Text 0 File WriterStatus.cpp, Line 113
start writing Lead-Out at LBA 2041856 (1F2800h), length 0 blocks
10:36:06 AM #25 Phase 37 File APIProgress.cpp, Line 275
Burn process completed successfully at 16x (22,160 KB/s)
10:36:07 AM #26 Text 0 File SCSIPTICommands.cpp, Line 253
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
10:36:13 AM #27 Text 0 File Cdrdrv.cpp, Line 9945
DriveLocker: UnLockVolume completed
10:36:13 AM #28 Text 0 File SCSIPTICommands.cpp, Line 403
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 7/2/2007 3:41:11 PM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 7/2/2007 3:41:10 PM (Prassi/Veritas driver for win 2K)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
====== *** NeroAPI, History File *** ======
|
Moderator
|
29. August 2007 @ 11:21 |
Link to this message
|
Hi pirate81
Do a clean install of Nero. Uninstall Nero - run the clean tool. Reboot now run a registry cleaner. Here's a good free one - ccleaner - use the issues and cleaner options.
Reinstall Nero - uses these versions:
package 1
package 2.
File 'Drivers\CDRALW2K.SYS':
Roxio and Nero don't always play well so uninstall Roxio and run the zap tool.
Take the burn speed down to 8x.
Give that a go ans let us know.
|
|
pirate81
Newbie
|
29. August 2007 @ 18:08 |
Link to this message
|
|
Well I dont have roxio and I always burn on slow speed. I will try the other things u said though, thanks.
|
|
Advertisement
|
|
|
Moderator
|
29. August 2007 @ 18:25 |
Link to this message
|
Some of the logs had 16x as the burn speed - they were successful too.
Here's a link that shows other program names for this driver in the log - CDRALW2K.SYS -link.
But try the clean install 1st.
|
|
