|
Nero only writes at 16x even after selecting 48x
|
|
|
hiexpect
Newbie
|
27. September 2007 @ 19:45 |
Link to this message
|
I could really use some help if anyone has some advice. I have been burning Cd's and Dvd's for quite some time without any problems and at max speeds. One day I started noticing I could only select up to a 32x burn speed, when burning a data disc using nero version 7.**. So I figured maybe it was my nero program and reinstalled it. Nothing. Then I updated my Firmware for my drive. Which did give me the option to burn up to 48X in the drop down menu. However since all of this. Even if I start the burn at 48x. The "actual" Write speed goes up to 16X and stays burning at that speed until its does.
Ill just list some random things Ive done and check. I have been searching forums for days and hours on this trying to find a solution. I just want my burning speed back.
DMA is on.
Firmware updated
Nero updated.
using nero drive speed for testing. Benchmarks works correctly and ends at 50x speed.
When I create a virtual disc it has the same problem. Starts at about 12x then goes to 16 where it stays the rest of the time.
Ive always used the same brand discs and they test and work just fine with no errors.
I dont get any burn failures regardless of speed and never get buffer fluctuations.
any other things I could have missed that would cause this burning cap?
|
|
Advertisement
|
|
|
|
Senior Member
|
28. September 2007 @ 12:29 |
Link to this message
|
Post the burn log.
Nero 7 history log Program Files>Nero>Nero 7>Core>NeroHistory.txt
|
|
hiexpect
Newbie
|
28. September 2007 @ 18:28 |
Link to this message
|
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.8.5.0
Internal Version: 7, 8, 5, 0
Recorder: <HL-DT-ST CD-RW GCE-8481B>Version: 1.05 - HA 1 TA 0 - 7.8.5.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <AXV CD/DVD-ROM >Version: 2.2a - HA 1 TA 2 - 7.8.5.0
Adapter driver: <SCSI> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : HL-DT-ST CD-RW GCE-8481B atapi Port 0 ID 0 DMA: On
CdRomPeripheral : HL-DT-ST DVD+-RW GWA4164B atapi Port 0 ID 1 DMA: On
DiskPeripheral : WDC WD1600JS-88MHB0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : SAMSUNG HD160JJ/P atapi Port 1 ID 1 DMA: On
CdRomPeripheral : AXV CD/DVD-ROM 2.2a sojuscsi Port 3 ID 0 DMA: Off
=== CDRom-Device-Map ===
AXV CD/DVD-ROM D: CDRom2
HL-DT-ST CD-RW GCE-8481B F: CDRom0
HL-DT-ST DVD+-RW GWA4164B G: CDRom1
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 2046MB (2095180kB)
Free physical memory: 1333MB (1365688kB)
Memory in use : 34 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
28.9.2007
CD-ROM (ISO)
7:11:17 PM #1 Text 0 File SCSIPTICommands.cpp, Line 411
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
7:11:17 PM #2 Text 0 File Isodoc.cpp, Line 6608
Iso document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : FALSE
Multisession : TRUE
Multisession type: : Start multisession
Burning mode : TAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
7:11:17 PM #3 Text 0 File Burncd.cpp, Line 3187
HL-DT-ST CD-RW GCE-8481B
Buffer underrun protection activated
7:11:17 PM #4 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
7:11:17 PM #5 Text 0 File Burncd.cpp, Line 3499
Turn on Track-At-Once, using CD-R/RW media
7:11:18 PM #6 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 359845 ( 79:59.70)
Last address to be written: 358754 ( 79:45.29)
7:11:18 PM #7 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
7:11:18 PM #8 Text 0 File DlgWaitCD.cpp, Line 2949
Recorder: HL-DT-ST CD-RW GCE-8481B;
CDR code: 00 97 27 66; OSJ entry from: Ricoh Company Limited
ATIP Data:
Special Info [hex] 1: 00 00 00, 2: 00 00 00 (LI 0:00.00), 3: 00 00 00 (LO 0:00.00)
Additional Info [hex] 1: 00 00 00 (invalid), 2: 00 00 00 (invalid), 3: 00 00 00 (invalid)
7:11:18 PM #9 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
7:11:18 PM #10 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 358755 (358755) = #358755/79:43.30
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 358753 blocks [F: HL-DT-ST CD-RW GCE-8481B]
--------------------------------------------------------------
7:11:18 PM #11 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [F: HL-DT-ST CD-RW GCE-8481B] for write in TAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc not fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 307200 735037440, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
-150 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
-150 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 358755 | 0 | 0x00
358755 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
7:11:18 PM #12 Text 0 File ThreadedTransferInterface.cpp, Line 1066
Removed 2 run-out blocks from end of track 1. Length: 358755 -> 358753.
7:11:18 PM #13 Text 0 File SCSIPTICommands.cpp, Line 209
SPTILockVolume - completed successfully for FCTL_LOCK_VOLUME
7:11:18 PM #14 Text 0 File Burncd.cpp, Line 4278
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
7:11:18 PM #15 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
7:11:18 PM #16 Text 0 File Burncd.cpp, Line 4397
Cache writing successful.
7:11:18 PM #17 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
7:11:18 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 48x (7,200 KB/s)
7:11:18 PM #19 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:11:18 PM #20 Text 0 File MMC.cpp, Line 22344
Set BUFE: Buffer underrun protection -> ON
7:11:18 PM #21 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
7:17:32 PM #22 Text 0 File MMC.cpp, Line 17098
<䱈䐭ⵔ呓䌀ⵄ坒䜠䑃刭⁗䍇ⵅ㐸ㄸ⁂〮5Ā> start Close Session
7:18:17 PM #23 Phase 37 File dlgbrnst.cpp, Line 1762
Burn process completed successfully at 48x (7,200 KB/s)
7:18:19 PM #24 Text 0 File SCSIPTICommands.cpp, Line 254
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
7:18:22 PM #25 Text 0 File Cdrdrv.cpp, Line 11214
DriveLocker: UnLockVolume completed
7:18:22 PM #26 Text 0 File SCSIPTICommands.cpp, Line 411
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
Thanks for helping out. Let me know what you think
|
AfterDawn Addict
|
28. September 2007 @ 18:32 |
Link to this message
|
The log indicates
Quote:
7:11:18 PM #18 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 48x (7,200 KB/s)
Quote:
7:18:17 PM #23 Phase 37 File dlgbrnst.cpp, Line 1762
Burn process completed successfully at 48x (7,200 KB/s)
|
|
hiexpect
Newbie
|
28. September 2007 @ 18:40 |
Link to this message
|
Yes.. Isnt that weird? It gives me the option to burn at 48X and starts "or" says is going that speed. But using the actual write speed option in Nero. It only revs up to 16x and stays there. As you noticed in the times. It took alittle over 6 mins. It use to take about 2.75 mins before.
|
|
hiexpect
Newbie
|
28. September 2007 @ 18:47 |
Link to this message
|
There was one day I decided to used the drop menu and burn at 12x just to see if the burning speed would actually change. (thinking a software glitch perhaps). It did however burn at only 12x. Then after I changed the speed back to 48x. It actually worked normal and burned at 48x (or reached up to that speed like the old days). Then stupid me couldnt leave well enough alone and thought it was fixed. Decided to open nero speed to see if I could speed up the spin up and down times and after that. It start only burning at 16x again. Never again was I able to re manipulate that fix. This has been going on for about 2.5 months. I burn 1 or 2 discs aday because I download my TV shows then burn them to watch them on a divx player when I go to bed. Im just going through another phase of wanting to figure this out.
|
Senior Member
|
28. September 2007 @ 18:49 |
Link to this message
|
|
maybe the discs only support writing @ 16X. what speed does the discs say on them for the speed? and what is the fastest speed your drive supports?
Playstation 2-Free McBoot,HDloader 8.0c,Open PS2 Loader 0.7,80gb Maxtor HDD,SMS Media Player,PGen,SNES Station- Installed
GameCube-SDload,SD Card Adapter,BBA Adapter,2 Color Case,GnuboyGX,MPlayer- Installed
|
|
hiexpect
Newbie
|
28. September 2007 @ 18:54 |
Link to this message
|
|
I've been using TDK and Memorex 52x Cd-R's for the past two years. I've used 100's of these in the past and yes Ive bought different bundles to make sure I might not have gotten a bad bunch.
|
|
hiexpect
Newbie
|
28. September 2007 @ 19:00 |
Link to this message
|
|
I keep wondering if maybe some kind of virus or something weird had caused a registry change or something. But I'm not sure if there is a setting that would give my Cd Rom a cap or not.
|
|
hiexpect
Newbie
|
28. September 2007 @ 19:04 |
Link to this message
|
I dont know if this added info would add to any ideas, but I have a Dl dvd burner as well that Ive always been able to burn at 16x with. Now since the issues with my 48x burner. Any time I try to burn a DvD data disc. I dont get any options but the 4x in the drop down menu. Some how both the drives are infected in some way.
|
Senior Member
|
29. September 2007 @ 06:46 |
Link to this message
|
|
|
|
hiexpect
Newbie
|
29. September 2007 @ 13:45 |
Link to this message
|
Yea, I tried that acouple two or three times and even installed older versions with no success. Using the nero cleaning tools. Also re-flashing the drives thinking maybe I used the wrong versions.
I appreciate everyone who has tried to help out as well. Thanks alot.
Also, Let me know if there is any device tools or programs I can maybe run to check anything.
|
|
hiexpect
Newbie
|
29. September 2007 @ 13:53 |
Link to this message
|
|
BTW, does my log show anything strange? I dont really know how specifically involved those logs get for showing issues.
|
|
hiexpect
Newbie
|
29. September 2007 @ 16:06 |
Link to this message
|
|
Have another note to comment on since this has all occurred. My device's buffer takes about 25secs to fill before it even starts to write nowadays. Before, as soon as I pressed the burn button. It would right then fill up with the Ultra buffer and start burning/writing immediately.
Still looking for any advice. thanks
|
|
hiexpect
Newbie
|
30. September 2007 @ 17:05 |
Link to this message
|
|
I know this goes alittle deeper than the simple stuff to check but there has to be someone who can help me figure out something strange as this.
Did everyone give up already?
|
Junior Member
|
1. October 2007 @ 02:44 |
Link to this message
|
|
why do you burn at such high speeds?
i allways burn my movies and music at 8,allways ;
and i use data cell 8 speed disc's and get a beautiful picture without any skips or fail burns and the like.
i also use data cell for music as well.
if you cany find data cell ,riteck are a very good choice for burning movies.
i have tried many,many brands of media and found that data cell & riteck 8 speedto be the best
EDT: hi miss gwendolin ,long time no see :-D
ADSL2/25000/1023/DSLAM>700mtrs
This message has been edited since posting. Last time this message was edited on 1. October 2007 @ 02:48
|
|
peteark
Newbie
|
1. October 2007 @ 07:10 |
Link to this message
|
|
I agree I never burn anything above x8 after years of wasting discs and getting poor copies I have found this is the best method for me
|
Senior Member
|
1. October 2007 @ 14:06 |
Link to this message
|
|
I burn at 4x for DVDs and 48x for CDs.
How old is the CD burner?
Have you uninstalled your IDE and DVD/CD drives and rebooted.
How is the AXV CD/DVD-ROM D: CDRom2 hooked up?
By the way do you have youe page file turned off?
Are you running other registry performance tweaks for XP?
|
|
hiexpect
Newbie
|
1. October 2007 @ 17:41 |
Link to this message
|
Originally posted by ularu:
why do you burn at such high speeds?
i allways burn my movies and music at 8,allways ;
and i use data cell 8 speed disc's and get a beautiful picture without any skips or fail burns and the like.
i also use data cell for music as well.
if you cany find data cell ,riteck are a very good choice for burning movies.
i have tried many,many brands of media and found that data cell & riteck 8 speedto be the best
EDT: hi miss gwendolin ,long time no see :-D
I burn at high speeds because it goes much faster. I have never seen a corrupt or bad quality disc from burning to fast. Never even a failure. I just dont see how you lose quality over the speed at which a disc is made. data is data. off and on switches, 0 and 1's. how does burning fast disrupt that? speaking of quality that is. If you get coasters. Yea, then I could see why someone would burn at 4 or 8x. Im not saying Im right or wrong. I just have no basis for comparison and never understood why people burn slow. So I rather go with speed. Plus Since I know I use to burn fast. It drives me crazy wondering why I cant still do that. Im on a mission! =)
|
|
hiexpect
Newbie
|
1. October 2007 @ 17:55 |
Link to this message
|
Originally posted by 56delray:
I burn at 4x for DVDs and 48x for CDs.
How old is the CD burner?
Have you uninstalled your IDE and DVD/CD drives and rebooted.
How is the AXV CD/DVD-ROM D: CDRom2 hooked up?
By the way do you have youe page file turned off?
Are you running other registry performance tweaks for XP?
hmm.. I would say my 48x burner is around 3-4 years old and my 16x dvd is about 2 at most.
Kinda ruled out the possibility of this being hardware related because I got it to work normal one day after messing with acouple things. Which relates to your other question.
I have the TweakXP installed. Gives you that option to "optimize" your CD Rom drives.. by software ofcourse.
that day I got it to work. I opened up that program. Tried to re-optimize the drives again. Then I opened up nero and selected a write speed of below 16x and burned a disc. Then when I burned another disc right after that selecting 48x, everything worked normal. (for that one burn).
That was when I mentioned I couldnt leave well enough alone and decided to open up Nero Cd speed. The one where you can change the spin up/downs of your drives. Since all of this started. It has been taking about 25 or so secs for the drives buffer to fill up and start actually burning. So I thought I could adjust that. But the burns started again at only achieving 16x speed. Since then. I havent been able to manipulate anything using the TweakXP or Nero to get my burn speeds back.
I did figure out for sure last night that this isnt related to only nero. Other programs are burning no faster.
I did uninstall and re install the ide drives and controllers as you mentioned.
Thanks for getting back with me.
Thanks for
|
Senior Member
|
2. October 2007 @ 08:25 |
Link to this message
|
|
I was talking more about registry performance tweaks and not any software.
The only thing I can think of at this point is going to a restore point or a fresh XP install.
|
|
hiexpect
Newbie
|
2. October 2007 @ 17:36 |
Link to this message
|
Originally posted by 56delray:
I was talking more about registry performance tweaks and not any software.
The only thing I can think of at this point is going to a restore point or a fresh XP install.
I was sorta thinking that to be my only option as well but I'm really not looking forward to any of that. I have made alot of registry changes from PC books and using TweakXp changes registry settings as well.
I just keep thinking it has to be something simple. I havent done tweaks for months before this all started to happen.
I'll figure something out if knowone has any ideas. Im thinking the root of my problem has something to do with the lead in and outs. Something is causing that to a crawl and if I can find a solution or reason for that happening. Then I think the speeds would go back to normal.
IDK... This is kinda fun in a way but then again sorta frustrating after this much time trying to figure something out.
|
|
Advertisement
|
|
|
|
hiexpect
Newbie
|
8. October 2007 @ 09:20 |
Link to this message
|
|
Sometimes the hardest things can be the simplest. Id forgot about opening up my computer a couple times in the past to blow out all the dust. Not once until now did I think maybe some dust fibers could have built up on the laser(s)...
After cleaning the drives they do work normal now. LOL.
|
