|
|
|
power calibration error
|
|
|
harvesgt
Newbie
|
12. October 2007 @ 16:20 |
Link to this message
|
first time posting.
I have a lite-on dual layer dvd burner that has been working fine until a days ago. It is now giving me a power calibration error but only when it is moving on to burn the second layer. I am using the same media as I was before, and even tried different media with no success.I have also tried different programs with no success. here is my error report. any help is much appreciated.
Windows XP 5.1
IA32
WinAspi: File 'Wnaspi32.dll': Ver=4.71 (0002), size=45056 bytes, created 7/17/2002 12:03:20 PM
ahead WinASPI: File 'C:\Program Files\Ahead\nero\Wnaspi32.dll': Ver=2.0.1.74, size=164112 bytes, created 10/26/2004 11:35:32 AM
Nero Version: 6.6.0.17
Internal Version: 6, 6, 0, 17c
(Nero Express)
Recorder: <LITE-ON DVDRW SHW-160P6S>Version: PS0B - HA 1 TA 0 - 6.6.0.17
Adapter driver: <atapi> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ATAPI
CD-ROM: <LITE-ON DVDRW SHW-160P6S>Version: PS0B - HA 1 TA 0 - 6.6.0.17
Adapter driver: <atapi> HA 1
=== Scsi-Device-Map ===
DiskPeripheral : WDC WD1200JB-75CRA0 atapi Port 0 ID 0 DMA: On
DiskPeripheral : ST320420A atapi Port 0 ID 1 DMA: On
CdRomPeripheral : LITE-ON DVDRW SHW-160P6S atapi Port 1 ID 0 DMA: On
DiskPeripheral : WDC WD2500JB-00REA0 atapi Port 1 ID 1 DMA: On
=== CDRom-Device-Map ===
LITE-ON DVDRW SHW-160P6S E: CDRom0
=======================
AutoRun : 0
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
ShowDrvBufStat : 0
BUFE : 0
Physical memory : 1022MB (1047344kB)
Free physical memory: 348MB (357336kB)
Memory in use : 65 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
12.10.2007
UDF/ISO compilation
7:13:33 PM #1 Phase 112 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation started
7:13:33 PM #2 Phase 114 File dlgbrnst.cpp, Line 1832
DVD-Video files reallocation completed (no file modified)
7:13:33 PM #3 Text 0 File Isodoc.cpp, Line 6356
UDF document burn settings
------------------------------------------
Determine maximum speed : FALSE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
UDF Mode : UDF/ISO bridge
UDF Revision : 1.02
UDF Partition Type : physical
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet :FALSE
Allow pathdepth more than 8 directories : FALSE
Allow more than 255 characters in path : FALSE
Write ISO9660 ;1 file extensions : TRUE
7:13:33 PM #4 Phase 111 File dlgbrnst.cpp, Line 1832
DVD-Video files sorted
7:13:33 PM #5 Text 0 File Reader.cpp, Line 127
Reader running
7:13:33 PM #6 Text 0 File Writer.cpp, Line 122
Writer LITE-ON DVDRW SHW-160P6S running
7:13:33 PM #7 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:13:33 PM #8 ISO9660GEN -11 File geniso.cpp, Line 3309
First writeable address = 0 (0x00000000)
7:13:34 PM #9 Text 0 File Burncd.cpp, Line 3233
Turn on Disc-At-Once, using DVD media
7:16:10 PM #10 Text 0 File DlgWaitCD.cpp, Line 270
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3225871 (716:51.46, 6300MB)
7:16:10 PM #11 Text 0 File DlgWaitCD.cpp, Line 282
Write in overburning mode: NO (enabled: CD)
7:16:10 PM #12 Text 0 File DlgWaitCD.cpp, Line 2483
Recorder: LITE-ON DVDRW SHW-160P6S, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RITEK, Media Type ID: D01, Product revision number: 1
Disc Application Code: 0, Extended Information Indicators: 0
7:16:10 PM #13 Text 0 File DlgWaitCD.cpp, Line 448
>>> Protocol of DlgWaitCD activities: <<<
=========================================
Disc not writeable. Insert writeable disc.
(Medium in drive: DVD+R DL. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
Disc not empty. Insert empty disc.
(Medium in drive: DVD+R DL. Medium required by compilation: DVD+R/RW, DVD-R/RW, DVD-R DL, DVD+R DL.)
7:16:11 PM #14 Text 0 File ThreadedTransferInterface.cpp, Line 838
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3225872 (3225872) = #3225872/716:51.47
relocatable, disc pos for caching/writing not required/ required, no patch infos
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3225872 blocks [LITE-ON DVDRW SHW-160P6S]
--------------------------------------------------------------
7:16:11 PM #15 Text 0 File ThreadedTransferInterface.cpp, Line 1051
Prepare recorder [LITE-ON DVDRW SHW-160P6S] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1:
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 6606585856, ISRC ""
DAO layout:
===========
__Start_|____Track_|_Idx_|_CtrlAdr_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0x00
0 | 1 | 0 | 0x41 | 0x00
0 | 1 | 1 | 0x41 | 0x00
3225872 | lead-out | 1 | 0x41 | 0x00
7:16:11 PM #16 Phase 24 File dlgbrnst.cpp, Line 1832
Caching of files started
7:16:12 PM #17 Text 0 File Burncd.cpp, Line 4120
Cache writing successful.
7:16:12 PM #18 Phase 25 File dlgbrnst.cpp, Line 1832
Caching of files completed
7:16:12 PM #19 Phase 36 File dlgbrnst.cpp, Line 1832
Burn process started at 2.4x (3,324 KB/s)
7:16:12 PM #20 Text 0 File ThreadedTransferInterface.cpp, Line 2661
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
7:16:57 PM #21 SCSI -1066 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0CBB0A00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 0x00 0x00 0x00 0x00 0x00 0x00 0x21 0x08 0x04 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x24 0x00
7:16:57 PM #22 Text 0 File DVDPlusDualLayer.cpp, Line 628
L0 Data Zone Capacity set to 1615568 (18A6D0h, 3155MB) -> OK, confirmed setting
7:16:57 PM #23 CDR -1205 File DVDPlusDualLayer.cpp, Line 655
Burning Layer 1
7:16:57 PM #24 Text 0 File DVDPlusDualLayer.cpp, Line 665
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
7:16:57 PM #25 Text 0 File Cdrdrv.cpp, Line 8892
---- DVD Structure: Physical Format Information (00h) ----
Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD+R DL (14), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Physical Sector Number of Data Area: FCFFFF h
End Sector Number in Layer 0: 1BA6CF h (LBN: 18A6CF h, 3155 MB)
Data in Burst Cutting Area (BCA) does not exist
Disc Application Code: 0 / 0 h
Extended Information indicators: 0 h
Disc Manufacturer ID: RITEK...
Media type ID: D01
Product revision number: 1
Number of Physical format information bytes in use in ADIP up to byte 63: 64
Media Specific [16..63]:
00 00 00 52 49 54 45 4B - 00 00 00 44 30 31 01 40 ...RITEK...D01.@
25 25 37 0C 00 28 64 00 - 28 64 20 1F 0C 0C 14 14 %%7..(d.(d......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
7:16:57 PM #26 Text 0 File DVDR.cpp, Line 5814
Drive: LITE-ON DVDRW SHW-160P6S
Book Type request [LO], rev 3: DVD-ROM
Changing the Book Type was finished successfully, return code 0
7:16:57 PM #27 CDR -1207 File DVDR.cpp, Line 5244
Book Type automatically set to: DVD-ROM
7:16:57 PM #28 Text 0 File DVDPlusRW.cpp, Line 665
Start write address at LBA 0
DVD high compatibility mode: Yes
7:33:38 PM #29 CDR -1206 File DVDPlusDualLayer.cpp, Line 1909
Burning Layer 2
7:33:38 PM #30 Text 0 File DVDPlusDualLayer.cpp, Line 1920
Perform layer 1 to 2 jump before writing at address 1615568 (18A6D0h)
7:33:39 PM #31 SCSI -1106 File Cdrdrv.cpp, Line 1436
SCSI Exec, HA 1, TA 0, LUN 0, buffer 0x0CBB1E00
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 0x00 0x00 0x18 0xA6 0xD0 0x00 0x00 0x10 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
7:33:39 PM #32 CDR -1106 File Writer.cpp, Line 311
Power calibration error
7:33:39 PM #33 Text 0 File ThreadedTransfer.cpp, Line 228
all writers idle, stopping conversion
7:33:39 PM #34 Text 0 File ThreadedTransfer.cpp, Line 222
conversion idle, stopping reader
7:33:41 PM #35 SCSI -1106 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x71 0x00 0x03 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x73 0x03
7:33:41 PM #36 SCSI -1176 File Cdrdrv.cpp, Line 1182
SCSI Exec, HA 1, TA 0, LUN 0
Status: 0x04 (0x01, SCSI_ERR)
HA-Status 0x00 (0x00, OK)
TA-Status 0x02 (0x01, SCSI_TASTATUS_CHKCOND)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x72
Sense Qual: 0x03
CDB Data: 0x5B 0x01 0x05 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Sense Data: 0x70 0x00 0x05 0x00 0x00 0x00 0x00 0x0A
0x00 0x00 0x00 0x00 0x72 0x03
7:33:41 PM #37 Phase 127 File dlgbrnst.cpp, Line 1832
Generating DVD high compatibility borders
7:33:41 PM #38 Phase 129 File dlgbrnst.cpp, Line 1832
Generating DVD borders completed successfully
7:33:41 PM #39 Text 0 File DVDR.cpp, Line 5814
Drive: LITE-ON DVDRW SHW-160P6S
Book Type request [LO], rev 3: DVD+R DL
Changing the Book Type was finished successfully, return code 0
7:33:41 PM #40 Phase 38 File dlgbrnst.cpp, Line 1832
Burn process failed at 2.4x (3,324 KB/s)
Existing drivers:
File 'Drivers\CDRALW2K.SYS': Ver=8.0.0.212 , size=2560 bytes, created 11/3/2005 3:00:00 AM
File 'Drivers\ASPI32.SYS': Ver=4.71 (0002) built by: WinDDK, size=16512 bytes, created 7/17/2002 9:05:10 AM
File 'WNASPINT.DLL': Ver=V1.18, size=57344 bytes, created 11/2/2002 10:53:04 AM
File 'Drivers\PXHELP20.SYS': Ver=3.00.43J, size=36624 bytes, created 1/29/2007 10:03:36 PM (Prassi/Veritas driver for win 2K)
File 'Drivers\atapi.sys': Ver=5.1.2600.2180 (xpsp_sp2_rtm.040803-2158), size=95360 bytes, created 8/4/2004 12:59:42 AM (Adapter driver for rec)
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
Advertisement
|
 |
|
|
|
laddyboy
AfterDawn Addict
|
13. October 2007 @ 08:00 |
Link to this message
|
|
|
|
Mav6215
Newbie
|
3. November 2007 @ 10:57 |
Link to this message
|
I, too, am having a similar problem to the OP.
Suddenly I am getting the Power Calibration Error on media that had previously been OK.
It only happens on the second layer (single layer discs are fine).
I have the OEM version of the SONY AW-G170A. SONY sent me a firmware upgrade (AAWG170A_172.exe) which doesn't appear to work - it just hangs. I have also tried the latest (AWG170A_173.exe) with the same result.
Is this error really doen to the media?
I did have a problem previously after installing the full version of Photo DVD Maker. Unisntalling solved that problem. BUt I haven't installed any other DVD authoring software except SONY DVDA 4.5. But I have had DVDA2 installed for several years without issue.
Any help would be appreciated.
The error log is below.
Name Removed
Serial Number Removed
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
(Nero Express)
Recorder: <SONY DVD RW AW-G170A> Version: 1.71 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW AW-G170A >Version: 1.71 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW AW-G170A 1.71 Pnp680 Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6V300F0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6V080E0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : Hitachi HDT725032VLAT80 atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00JJC0 atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6G160P0 atapi Port 4 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW AW-G170A I: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047784kB)
Free physical memory: 513MB (525372kB)
Memory in use : 49 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
3.11.2007
Burn DVD Image
13:54:24 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
13:54:24 #2 IMAGEGEN -10 File ImageGen.cpp, Line 366
Image was written as DAO.
DAOI:
MediaCatalogNumber = ''
TocType = 0x00
Finalized = 1
First/Last Track = 1 / 1
1: ISRC = ''
Blocksize = 2048
TrackMode = 'TRM_DATA_MODE1'
TrackConfig = 0x00
First/Last Index = 0 / 1
Index0FilePos = 0, Index1FilePos = 0, NextTrackFilePos = 5821857792
CUES:
MTYP: Mediumtype = DVD (old format) (0x1C)
Image file name: <F:\Bourne.nrg>
13:54:24 #3 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
13:54:24 #4 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 2842703 (631:42.53, 5552MB)
13:54:24 #5 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
13:54:24 #6 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW AW-G170A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
13:54:24 #7 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
13:54:24 #8 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 (1 - DVD-ROM)
2 indices, index0 (150) not provided
original disc pos #0 + 2842704 (2842704) = #2842704/631:42.54
not relocatable, disc pos for caching/writing not required/not required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 2842704 blocks [I: SONY DVD RW AW-G170A]
--------------------------------------------------------------
13:54:24 #9 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [I: SONY DVD RW AW-G170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 5821857792, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 2842704 | 0 | 0x00
2842704 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
13:54:24 #10 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
13:54:24 #11 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-Yes (<64KB)
13:54:24 #12 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
13:54:25 #13 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
13:54:25 #14 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
13:54:25 #15 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started
13:54:25 #16 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
13:54:25 #17 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
13:56:10 #18 Text 0 File WriterStatus.cpp, Line 113
<I: SONY DVD RW AW-G170A> start writing Lead-Out at LBA 2842704 (2B6050h), length 0 blocks
13:56:10 #19 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 38.9x (53,770 KB/s)
13:56:10 #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
13:56:10 #21 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (not relocatable, no disc pos, no patch infos, orig at #0): write at #0
13:56:11 #22 Text 0 File DVDPlusDualLayer.cpp, Line 494
Disc finalized, LBA total Image size: 2842704 (5552MB), Last LBA L0: 1421359 (2776MB)
13:56:36 #23 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x00000000: Len x804
13:56:36 #24 Text 0 File DVDPlusDualLayer.cpp, Line 659
L0 Data Zone Capacity set to 1421360 (15B030h, 2776MB) -> OK, confirmed setting
13:56:36 #25 CDR -1205 File DVDPlusDualLayer.cpp, Line 686
Burning Layer 1
13:56:36 #26 Text 0 File DVDPlusDualLayer.cpp, Line 696
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
13:56:36 #27 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 44 30 31 02 40 ...RICOHJPND01.@
25 25 37 10 00 2C 6C 00 - 2C 6C 20 1F 0C 0C 14 14 %%7..,l.,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 01 01 20 00 ................
13:56:36 #28 Text 0 File DVDR.cpp, Line 6783
Drive: SONY DVD RW AW-G170A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
13:56:36 #29 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM
13:56:36 #30 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
13:56:36 #31 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
14:03:03 #32 CDR -1206 File DVDPlusDualLayer.cpp, Line 1969
Burning Layer 2
14:03:03 #33 Text 0 File DVDPlusDualLayer.cpp, Line 1980
Perform layer 1 to 2 jump before writing at address 1421360 (15B030h)
14:03:44 #34 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 15 B2 00 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x00000000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
14:03:44 #35 CDR -1106 File Writer.cpp, Line 303
Power calibration error
I: SONY DVD RW AW-G170A
14:03:45 #36 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
14:03:46 #37 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1421824
14:03:46 #38 Text 0 File DVDR.cpp, Line 6783
Drive: SONY DVD RW AW-G170A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
14:03:47 #39 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 8x (11,080 KB/s)
14:03:48 #40 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
14:03:52 #41 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
14:03:52 #42 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
Senior Member
|
3. November 2007 @ 11:24 |
Link to this message
|
Originally posted by Mav6215:
....
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW AW-G170A 1.71 Pnp680 Port 0 ID 0 DMA: Off
....
Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2
....
13:56:10 #20 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 8x (11,080 KB/s)
This applies to your problem.
Originally posted by laddyboy:
I'll just note that any DL media other than Verbatim +RDL can be difficult for some burners to handle. Ritek media, which is what you have is OK for some burners, but is problematic for others.
..... ImgBurn is probably the best burning engine available and it's free.
http://www.videohelp.com/dvdmedia?dvdmed...h+or+List+Media
Also the rule is to burn at half the rated speed of the media.
8x is too fast.
Last but not least your DMA is off.
http://webpages.charter.net/bacitup/TheGuides/checking%20DMA.pdf
|
Senior Member
|
3. November 2007 @ 16:01 |
Link to this message
|
@Mav6215
Recorder: <SONY DVD RW AW-G170A> [b]Version: 1.71[/b]
Your burner's firmware is oudated, you should update to version 1.73, you can get it here http://forum.rpc1.org/dl_firmware.php?download_id=2370
Also..
CdRomPeripheral : SONY DVD RW AW-G170A 1.71 Pnp680 Port 0 ID 0 DMA: Off
You need to enable DMA for your burner as well, 56delray provided a link on how to do that if needed. The two suggestions should do the trick, but if not....
-try and clean the burners lens, they have CDs that will do this for you.
-try another brand of Media like Verbatims.
-If all fails, it's possible that the problem lies with the drive, it might be going bad on you, in this case getting a new one will do.
|
Senior Member
|
3. November 2007 @ 16:41 |
Link to this message
|
|
Thanx johnl123
I looked that firmware up but forgot to post it.
|
|
laddyboy
AfterDawn Addict
|
3. November 2007 @ 19:02 |
Link to this message
|
|
@john @delray
I think the member said he tried the firmware update and it stalled on him in the process. I'm guessing it was because the DMA transfer mode was off due to a comm error on the channel. Hopefully by getting that set back on, the member will also be able to update the firmware.
|
|
Mav6215
Newbie
|
3. November 2007 @ 20:12 |
Link to this message
|
Hi
Thanks for the replies, especially as you had to wade through all the Log file listings.
I checked the DMA in Hardware Devices and they all appeared to be ON.
So I uninstalled them and rebooted.
I downloaded the firmware upgrade but all I got was a window with some giberish and and OK button which I clicked. Another window appeared for less than a second then vanished. I still don't think the driver has been updated.
Also, after the previous attempts at updating the driver and rebooting the SONY GW170A went a little crazy with the draw opening/closing fully then opening a short amount and closing many times in quick succession. Any ideas what this is a symptom of?
I'll look into ImgBurn but can anyone tell me whether it can burn nrg files resulting from rendering a DDVD to file in Nero Vision 4?
Thanks for all the help and advice.
|
|
laddyboy
AfterDawn Addict
|
3. November 2007 @ 21:31 |
Link to this message
|
Yes, ImgBurn burns Nero nrg files. They are treated the same as an ISO image.
The tray opening and closing sometimes happens with firmware updates. I'm guessing that maybe the firmware update you had was in Japanese or some other script language. Updates don't take a very long time. All of your devices were showing up in DMA mode with the exception of your burner which is why the other members pointed that out. Sometimes some controllers don't report correctly with Nero and that could be the case here. Do you have another log, post update, that you could post?
|
|
Mav6215
Newbie
|
3. November 2007 @ 21:52 |
Link to this message
|
Hi
Just burnt to a Traxdata +R DL disc without problems (Played back in Nero Showtime OK). Nero Express indicated an 8x speed but I changed this to 2.4x.
I then attempted to burn with the previous media type (DataWrite +R DL) and the problem came back. I had set to 2.4x.
Looking at the new Log file it appears DMA is still 'Off' - yet this didn't affect the Traxdata disc.
Also, the firmware is still showing as 1.71 - agin, didn't seem to bother the Traxdata disc.
As I have said before, I have DL burned OK to the Datawrite discs before so do not understand why the sudden change.
Thanks again for all advice.
|
|
laddyboy
AfterDawn Addict
|
3. November 2007 @ 22:18 |
Link to this message
|
Here's a different link to the 1.73 firmware. Maybe it'll be in English.
http://liggydee.cdfreaks.com/fwinfo/en/7170a/173
I don't have an answer why the Verbs won't burn. Most have the opposite problem, i.e., they can't burn TraxData, Ricoh, and Ridata. Could just be a bad batch I guess.
|
|
Mav6215
Newbie
|
3. November 2007 @ 22:28 |
Link to this message
|
The last Log file for the error:
Windows XP 5.1
IA32
WinAspi: -
NT-SPTI used
Nero Version: 7.10.1.0
Internal Version: 7, 10, 1, 0
Recorder: <SONY DVD RW AW-G170A> Version: 1.71 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
Drive buffer : 2048kB
Bus Type : default (0) -> ATAPI, detected: ?
CD-ROM: <SONY DVD RW AW-G170A >Version: 1.71 - HA 1 TA 0 - 7.10.1.0
Adapter driver: <IDE> HA 1
=== Scsi-Device-Map ===
CdRomPeripheral : SONY DVD RW AW-G170A 1.71 Pnp680 Port 0 ID 0 DMA: Off
DiskPeripheral : Maxtor 6V300F0 atapi Port 1 ID 0 DMA: On
DiskPeripheral : Maxtor 6V080E0 atapi Port 2 ID 0 DMA: On
DiskPeripheral : Hitachi HDT725032VLAT80 atapi Port 3 ID 0 DMA: On
DiskPeripheral : WDC WD800JB-00JJC0 atapi Port 4 ID 0 DMA: On
DiskPeripheral : Maxtor 6G160P0 atapi Port 4 ID 1 DMA: On
=== CDRom-Device-Map ===
SONY DVD RW AW-G170A I: CdRom0
=======================
AutoRun : 1
Excluded drive IDs:
WriteBufferSize: 83886080 (0) Byte
BUFE : 0
Physical memory : 1023MB (1047784kB)
Free physical memory: 323MB (331132kB)
Memory in use : 68 %
Uncached PFiles: 0x0
Use Inquiry : 1
Global Bus Type: default (0)
Check supported media : Disabled (0)
4.11.2007
ISO compilation
01:11:43 #1 Text 0 File SCSIPTICommands.cpp, Line 424
LockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
01:11:43 #2 Text 0 File Isodoc.cpp, Line 6666
Iso document burn settings
------------------------------------------
Determine maximum speed : TRUE
Simulate : FALSE
Write : TRUE
Finalize CD : TRUE
Multisession : FALSE
Burning mode : DAO
Mode : 1
ISO Level : 1 (Max. of 11 = 8 + 3 char)
Character set : ISO 9660
Joliet : TRUE
Allow pathdepth more than 8 directories : TRUE
Allow more than 255 characters in path : TRUE
Write ISO9660 ;1 file extensions : TRUE
01:11:43 #3 ISO9660GEN -11 File Geniso.cpp, Line 3343
First writeable address = 0 (0x00000000)
01:11:43 #4 Text 0 File Burncd.cpp, Line 3508
Turn on Disc-At-Once, using DVD media
01:11:43 #5 Text 0 File DlgWaitCD.cpp, Line 307
Last possible write address on media: 4173823 (927:30.73, 8151MB)
Last address to be written: 3928255 (872:56.55, 7672MB)
01:11:43 #6 Text 0 File DlgWaitCD.cpp, Line 319
Write in overburning mode: NO (enabled: CD)
01:11:43 #7 Text 0 File DlgWaitCD.cpp, Line 2972
Recorder: SONY DVD RW AW-G170A, Media type: DVD+R9 Double Layer
Disc Manufacturer ID: RICOHJPN, Media Type ID: D01, Product revision number: 2
Disc Application Code: 0, Extended Information Indicators: 3
01:11:43 #8 Text 0 File DlgWaitCD.cpp, Line 493
>>> Protocol of DlgWaitCD activities: <<<
=========================================
01:11:43 #9 Text 0 File ThreadedTransferInterface.cpp, Line 793
Setup items (after recorder preparation)
0: TRM_DATA_MODE1 ()
2 indices, index0 (150) not provided
original disc pos #0 + 3928256 (3928256) = #3928256/872:56.56
relocatable, disc pos for caching/writing not required/ required
-> TRM_DATA_MODE1, 2048, config 0, wanted index0 0 blocks, length 3928256 blocks [I: SONY DVD RW AW-G170A]
--------------------------------------------------------------
01:11:43 #10 Text 0 File ThreadedTransferInterface.cpp, Line 995
Prepare [I: SONY DVD RW AW-G170A] for write in CUE-sheet-DAO
DAO infos:
==========
MCN: ""
TOCType: 0x00; Session Closed, disc fixated
Tracks 1 to 1: Idx 0 Idx 1 Next Trk
1: TRM_DATA_MODE1, 2048/0x00, FilePos 0 0 8045068288, ISRC ""
DAO layout:
===========
___Start_|____Track_|_Idx_|_CtrlAdr_|_____Size_|______NWA_|_RecDep__________
0 | lead-in | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 0 | 0x41 | 0 | 0 | 0x00
0 | 1 | 1 | 0x41 | 3928256 | 0 | 0x00
3928256 | lead-out | 1 | 0x41 | 0 | 0 | 0x00
01:11:43 #11 Text 0 File SCSIPTICommands.cpp, Line 215
SPTILockVolume - completed successfully for FSCTL_LOCK_VOLUME
01:11:43 #12 Text 0 File Burncd.cpp, Line 4294
Caching options: cache CDRom or Network-Yes, small files-No (<64KB)
01:11:43 #13 Phase 24 File dlgbrnst.cpp, Line 1762
Caching of files started
01:11:43 #14 Text 0 File Burncd.cpp, Line 4413
Cache writing successful.
01:11:43 #15 Phase 25 File dlgbrnst.cpp, Line 1762
Caching of files completed
01:11:43 #16 Phase 28 File dlgbrnst.cpp, Line 1762
Speed measurement started
01:11:43 #17 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
01:11:43 #18 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 590400
01:13:51 #19 Text 0 File WriterStatus.cpp, Line 113
<I: SONY DVD RW AW-G170A> start writing Lead-Out at LBA 3928256 (3BF0C0h), length 0 blocks
01:13:51 #20 Phase 29 File dlgbrnst.cpp, Line 1711
Speed measurement completed: 44.5x (61,528 KB/s)
01:13:51 #21 Phase 36 File dlgbrnst.cpp, Line 1762
Burn process started at 2.4x (3,324 KB/s)
01:13:51 #22 Text 0 File ThreadedTransferInterface.cpp, Line 2721
Verifying disc position of item 0 (relocatable, disc pos, no patch infos, orig at #0): write at #0
01:13:51 #23 Text 0 File DVDPlusDualLayer.cpp, Line 494
Disc finalized, LBA total Image size: 3928256 (7672MB), Last LBA L0: 1964127 (3836MB)
01:14:17 #24 SPTI -1066 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1066)
Sense Key: 0x05 (KEY_ILLEGAL_REQUEST)
Sense Code: 0x24
Sense Qual: 0x00
CDB Data: 0xAD 00 00 00 00 00 00 21 08 04 00 00
Sense Area: 0x70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0 00 07
Buffer x00000000: Len x804
01:14:17 #25 Text 0 File DVDPlusDualLayer.cpp, Line 659
L0 Data Zone Capacity set to 1964128 (1DF860h, 3836MB) -> OK, confirmed setting
01:14:17 #26 CDR -1205 File DVDPlusDualLayer.cpp, Line 686
Burning Layer 1
01:14:17 #27 Text 0 File DVDPlusDualLayer.cpp, Line 696
Start writing layer 1 at address 0 (0h)
Recording mode: unknown Recording Mode
01:14:17 #28 Text 0 File Cdrdrv.cpp, Line 9872
---- Disc Structure: Physical Format Information (00h) ----
Media Type: 0, Layer: 0, Address: 0 (0 h), AGID: 0; Length: 2050
Book Type: DVD-ROM (0), Part Version: 1.0x (1)
Disc Size: 120 mm, Maximum Rate: <not specified> (F h)
Number of Layers: 2, Track Path: Opposite Track Path (OTP), Layer Type: recordable
Linear Density: 0,293 um/bit, Track Density: 0,74 um/track
Starting Physical Sector Number of Data Area: 30000 h (DVD-ROM, DVD-R/-RW, DVD+R/+RW)
End Sector Number in Layer 0: 22D7FF h (LBN: 1FD7FF h, 4075 MB)
Data in Burst Cutting Area (BCA) does not exist
Media Specific [16..63]:
00 00 03 52 49 43 4F 48 - 4A 50 4E 44 30 31 02 40 ...RICOHJPND01.@
25 25 37 10 2C 6C 20 1F - 2C 6C 20 1F 0C 0C 14 14 %%7.,l..,l......
02 01 01 20 00 20 1F 0C - 0C 14 14 02 04 00 33 7B ..............3{
01:14:17 #29 Text 0 File DVDR.cpp, Line 6783
Drive: SONY DVD RW AW-G170A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
01:14:17 #30 CDR -1207 File DVDR.cpp, Line 6477
Book Type automatically set to: DVD-ROM
01:14:17 #31 Text 0 File DVDPlusRW.cpp, Line 675
Start write address at LBA 0
DVD high compatibility mode: Yes
01:14:17 #32 Text 0 File ThreadedTransfer.cpp, Line 269
Pipe memory size 83836800
01:37:51 #33 CDR -1206 File DVDPlusDualLayer.cpp, Line 1969
Burning Layer 2
01:37:51 #34 Text 0 File DVDPlusDualLayer.cpp, Line 1980
Perform layer 1 to 2 jump before writing at address 1964128 (1DF860h)
01:38:25 #35 SPTI -1106 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1106)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x73
Sense Qual: 0x03
CDB Data: 0x2A 00 00 1D FA 20 00 00 20 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 73 03
Buffer x00000000: Len x10000
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
0x00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
01:38:25 #36 CDR -1106 File Writer.cpp, Line 303
Power calibration error
I: SONY DVD RW AW-G170A
01:38:25 #37 SPTI -1135 File SCSIPassThrough.cpp, Line 179
CdRom0: SCSIStatus(x02) WinError(0) NeroError(-1135)
Sense Key: 0x03 (KEY_MEDIUM_ERROR)
Sense Code: 0x0C
Sense Qual: 0x00
CDB Data: 0x5B 01 01 00 00 01 00 00 00 00 00 00
Sense Area: 0x70 00 03 00 00 00 00 0A 00 00 00 00 0C
01:38:26 #38 Text 0 File DVDPlusRW.cpp, Line 935
EndDAO: Last written address 1964576
01:38:27 #39 Text 0 File DVDR.cpp, Line 6783
Drive: SONY DVD RW AW-G170A
Book Type request [NEC]: DVD-ROM, write to RAM
select Book Type setting from RAM
Changing the Book Type was finished successfully, return code 0
01:38:28 #40 Phase 38 File dlgbrnst.cpp, Line 1762
Burn process failed at 2.4x (3,324 KB/s)
01:38:29 #41 Text 0 File SCSIPTICommands.cpp, Line 261
SPTIDismountVolume - completed successfully for FSCTL_DISMOUNT_VOLUME
01:38:32 #42 Text 0 File Cdrdrv.cpp, Line 11185
DriveLocker: UnLockVolume completed
01:38:32 #43 Text 0 File SCSIPTICommands.cpp, Line 424
UnLockMCN - completed sucessfully for IOCTL_STORAGE_MCN_CONTROL
Existing drivers:
Registry Keys:
HKLM\Software\Microsoft\Windows NT\CurrentVersion\WinLogon\AllocateCDROMs : 0 (Security Option)
|
|
laddyboy
AfterDawn Addict
|
3. November 2007 @ 23:07 |
Link to this message
|
OK that's Ricoh media that you were trying to burn and not Verbatim. Ricoh and Ridata can be problematic for some burners. Usually you need up to date firmware to assure success. However, I have an older NEC that burns everything so I usually rely on it and I haven't updated its firmware for at least a year.
|
|
ccampton
Suspended permanently
|
21. March 2008 @ 16:57 |
Link to this message
|
i too am getting this on the second layer, using cheap dvd's, but they worked fine before.. i have verbatiums on the way, but why would it stop working all of the sudden? i tried to update my firmware with that like, first of all it looked like i was already up-to-date, but i went ahead anyway, and i got an error with windows wanting for me to search for a solution to the problem the program was having. now it says its a NEC drive when i open up the flashing utility but it is a Mad Dog Burner. I would like to send my log file, could someone help me do this?
|
|
laddyboy
AfterDawn Addict
|
21. March 2008 @ 17:48 |
Link to this message
|
Mad Dog sometimes rebranded NEC burners. Nero logs are in the following locations.
Nero 6: Program Files -> Ahead -> Nero -> NeroHistory
Nero 7: Program Files -> Nero -> Nero7 -> Core -> NeroHistory
Or see this more detailed description from locoeng:
http://my.afterdawn.com/locoeng/blog_entry.cfm/385
|
|
Advertisement
|
|
|
AfterDawn Addict
1 product review
|
22. March 2008 @ 13:42 |
Link to this message
|
If you're using Nero 7 and your version is up to date(7.10.1.2), the burn logs location is changed. You would find them here:
C:\Documents and Settings\User Name\Application Data\Ahead
It was a hiden folder, so you would need to enable "Show hidden folders/files" in Folders->View.
 Piss me off, and I Will ignore You! |
|
