|
Pirates of the Caribbean 3 - World's End (Solved)
|
|
|
Yungqb7
Newbie
|
8. December 2007 @ 22:09 |
Link to this message
|
|
|
|
Advertisement
|
|
|
|
Senior Member
|
9. December 2007 @ 09:00 |
Link to this message
|
Had no problem doing it with clone & anydvd, but did learn something this weekend, of course after deleting all the trash the compression was still pretty high, I don't like going under 70% much but on my regular 32" tv it's not bad, but when I took my copy to my neighbors who just bought a 32" lcd samsung, and this thing is not a micky mouse set, it was top rated by consumer reports mag for a 32" set, and watching my copy of pirates it was terrible.
I quickly brought over some movies with about 80% and it was still bad, not as bad as the ladder but still very noticable, I never watched a movie on these new screens, I went over to two other friends, one had an lcd another had a plasma just to go further on these copies, yeah same thing on those also, the copy of pirate was crapola.
I tried my original with clone to see if it could do a 2 disc, not the DL, of course it could do that, don't have any DL's yet, will have to get some now I guess, just hate having to pay that kind of price when doing it on 2 dvd's is so much cheaper, with clone it doesn't have the ability to split it in two not to my knowledge anyway, but I called on another AD member (ZoSoIV) and he guided me to a 2 disc solution using something else, THANKS ZoSoIV.
I went back to my neighbors, watched the 2 disc copy and it was a buete, as great as the original, I really didn't know much at all about all these new sets and came to this conclusion, they shine with perfection, watching anything under 80% you can hang it up, because any small imperfection they greatly enhance, the 3 friends sets I watched over this weekend 2 had HD cable, it was nice, I mean really nice, the last had basic cable and the picture was terrible.
|
Moderator
|
9. December 2007 @ 09:08 |
Link to this message
|
That's why i only use DVD Shrink for movies which are 90%+ compression, anything less i use DVD Rebuilder. Though as i mentioned further up the thread, DVDFab has been breaking DVD Rebuilder lately so i did this movie with DVD Shrink and the quality settings turned on, came out very nice on my 32" LCD (DVD player upconverts to 1080i too). I'll be using DVD Rebuilder on this movie in a couple days once my shiny new Quad Core pc is built, so i can get a perfect picture instead of Shrink's 70%
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules *** |
Senior Member
|
9. December 2007 @ 09:34 |
Link to this message
|
|
creaky you kinda lost me on your (once my shiny new Quad Core pc is built, so i can get a perfect picture instead of Shrink's 70%), unless I don't understand something here, how would this have an affect on watching this movie on tv, e.g. making a copy with this new pc your talking about would improve it?
|
Moderator
|
9. December 2007 @ 09:43 |
Link to this message
|
|
i just mean that i'm not home at the moment, and the PC i have with me takes too long for DVD Rebuilder to run and do it's magic, takes 3/4 hours, that's time i need to use the PC for other things; with the new PC i'll be able to re-encode movies and use it for loads of other things at the same time :)
DVD Rebuilder can work magic with movies and Episodic discs, just recently i used it to re-encode the whole of the latest Battlestar Galactica season, each disc was 44% compression and Rebuilder worked some impressive magic and i have some pretty nice quality discs (to get around to watching)
edited for my usual misspellings
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 9. December 2007 @ 09:50
|
Senior Member
|
9. December 2007 @ 09:47 |
Link to this message
|
|
oh ok got it, I tought maybe you had some magical better solution for better copies lol, thanks for the comeback.
|
|
SHOU5
Account closed as per user's own request
|
10. December 2007 @ 15:59 |
Link to this message
|
Had the same error backing up Pirates 3 but I had AnyDVD rip it to my HD and Shrinked burned it with no problems from the saved folder.
Shou5
|
|
gotbeer
Suspended due to non-functional email address
|
10. December 2007 @ 22:42 |
Link to this message
|
my first post here, but i have been burning for a few years now.
i just got this movie lastnight and all i used was Anydvd 6.3.0.0 and clonedvd2, and some new 8x+r DL verbs.took about 38 mins burnt at 6x and is flawless on my 36in JVC. i cant complain with it
GOT BEER?
|
AfterDawn Addict
|
11. December 2007 @ 14:28 |
Link to this message
|
CloneDVD does "split" movies to two discs. That is what the little "sissors" icons are for. If you want to use DL discs, I would recomend using CloneCD with Verbs as the media.
|
|
gotbeer
Suspended due to non-functional email address
|
11. December 2007 @ 14:56 |
Link to this message
|
ive tried clonecd to burn with DL Verbs. didnt like it much. wasted 1 disc and the other 2 skipped and had pixels in it around the break.
for me clonedvd2 does a great job with the 8x+r DL verbs.
just my 2 cents
GOT BEER?
|
AfterDawn Addict
|
11. December 2007 @ 15:04 |
Link to this message
|
Never had a problem with CloneCD, but then I only burn at 4x with Singapore Verbs....
|
Moderator
|
11. December 2007 @ 16:06 |
Link to this message
|
Main PC ~ Intel C2Q Q6600 (G0 Stepping)/Gigabyte GA-EP45-DS3/2GB Crucial Ballistix PC2-8500/Zalman CNPS9700/Antec 900/Corsair HX 620W
Network ~ DD-WRT ~ 2node WDS-WPA2/AES ~ Buffalo WHR-G54S. 3node WPA2/AES ~ WRT54GS v6 (inc. WEP BSSID), WRT54G v2, WRT54G2 v1. *** Forum Rules ***
This message has been edited since posting. Last time this message was edited on 11. December 2007 @ 16:06
|
|
Paul_Kay
Newbie
|
12. December 2007 @ 21:20 |
Link to this message
|
Hi,
This is my first post after using and searching this great website for quite a while.
I have issues backing up POC 3.
But unlike what this thread is about, I can't even get my DVD drive to recognize the DVD. When I insert the DVD in my drive, the front led blink for a few seconds and then it's like there is no DVD in the drive.
This never happens before and I tried with other movies and I can play them fine. I'm not talking DVD-R here but originals copies.
My drive is an LG GSA-4163B. It's pretty old but it does the trick (until now).
So why do you think I can't even listen to POC 3 on my PC?
Thank you for your help,
Paul
|
AfterDawn Addict
|
14. December 2007 @ 03:48 |
Link to this message
|
|
does it play in your DVD player ok? it may be a bad pressing. try another drive to transcode it of you can or use a freinds PC drive and see if it works there. that will tell you if its a bad pressed DVD or not
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
|
Paul_Kay
Newbie
|
14. December 2007 @ 09:42 |
Link to this message
|
|
Yes it plays in my home DVD player.
I'll try another PC... thank you.
|
|
res2cue
Suspended due to non-functional email address
|
14. December 2007 @ 10:21 |
Link to this message
|
|
since this problem, will your computer problem still play other movies?
Hiram 319
AF & AM |
|
Paul_Kay
Newbie
|
14. December 2007 @ 11:44 |
Link to this message
|
|
Yes my computer plays every other DVD movies.
|
Newbie
|
19. December 2007 @ 03:26 |
Link to this message
|
Backed up completed. = )
Software used: DVDShrink 3.2 + AnyDVD 6.3.0.0
Backed up to .iso file.
Used NeroImage to mount .iso file.
Burned using: CloneDVD 2.9.1.2
Select 'Copy DVD titles'.
The odd thing is my Plexter DVD writer kept bombing out at 86%.
So I tried using my NEC DVD writer and that worked!
Full menu + bonus features and tested on my Sony DVD player.
Hope this helps.
|
|
DoggRuff
Junior Member
|
26. December 2007 @ 11:22 |
Link to this message
|
Backup also successfully completed here.
I also used DVD Shrink (v3.2) and AnyDVD (latest v6.3.0.3) and had no problems. Backed it up to an ISO image file and burned it with Nero. Originally, I was having a problem while using Shrink, Decrypter, or CloneDVD and an older version of AnyDVD.
|
|
bear161
Newbie
|
30. December 2007 @ 23:19 |
Link to this message
|
|
|
|
LuvpeaceG
Newbie
|
31. December 2007 @ 10:18 |
Link to this message
|
Why do you need FixVTS?
My preferred and soimple solution is
AnyDVD HD rip to m2ts
Choose/guess m2ts
Tsremux to ts and play/convert at will
|
AfterDawn Addict
|
31. December 2007 @ 13:57 |
Link to this message
|
fixvts cleans the file but if your using anydvd you don't need it
Antec 1200 Full-Tower Case/Thermaltake 750-Watt PS/ASUS SABERTOOTH Z77 Mobo/Western Digital Black WD500 500GB 7200 RPM 64MB Cache/NVIDIA GeForce 8800GTX 384-bit GDDR3 PCI Express Video Card/CORSAIR DOMINATOR PLATINUM 16GB DDR3 /Intel Core i7-3770K Ivy Bridge 3.5GHz (3.9GHz Turbo)/CORSAIR Hydro High Performance Liquid CPU Cooler/3-Asus DRW-24B1ST Sata Drives/Samsung 2493HM 24" LCD Monitior 1920x1200 resolution,5ms respone time/OS Windows 10 Pro SP1 64-bit
|
Junior Member
|
6. January 2008 @ 12:13 |
Link to this message
|
I am also unable to backup this movie. I am using Verbatim DL discs and get this error message:
-------------------------
ScsiStatus: 0x02
Interpretation: Check Condition
CDB: 2A 00 00 00 00 00 00 00 20 00
Interpretation: Write(10) - Sectors: 0 - 31
Sense Area: 70 00 03 00 00 00 00 12 00 00 00 00 72 01 00 00 00 00 00 01 02 03 04
Interpretaion: Session Fixation Error Writing Lead In
----------------------
Then I got an "Interpretation: Send DVD Structure - DVD+R DL Boundary Information" and "Interpretation: Invalid Field in Paremeter List" message.
Using latest versions of DVDFab HD Decrypter 4 and ImgBurn. Any suggestions?
Thanks.
This message has been edited since posting. Last time this message was edited on 6. January 2008 @ 12:16
|
|
Advertisement
|
|
|
|
seagrave
Member
|
11. January 2008 @ 14:35 |
Link to this message
|
|
Had problems with with Ripit4me in both full disk and movie mode. But had not problems with the latest free version of DVD Fab.
|
